Products

• On-Instrument MATLAB: Run scripts directly without PC data transfer overhead.
• Instrument Data Access: Scripts access waveform data, measurements, and settings directly.
• Custom Analysis: Proprietary algorithms, custom measurements, automated sequences.
• Lifetime License Activation: Activate once, owned for the life of the instrument. No subscriptions, no renewals, no maintenance fees.

• 2 Gpts Memory: Doubles standard 1 Gpt across all channels.
• Longer Full-Speed Captures: Twice the duration at maximum sample rate.
• Deep Protocol Search: Search longer captures for intermittent errors over extended periods.
• Lifetime License Activation: Activate once, owned for the life of the instrument. No subscriptions, no renewals, no maintenance fees.

• Ethernet Frame Decode: Trigger and decode Ethernet frames including preamble, MAC addresses, type/length, data, and FCS.
• Error Detection: Identifies FCS errors, runt frames, and jabber conditions.
• Triggering: Trigger on MAC addresses, frame types, or specific data patterns.
• Lifetime License Activation: Activate once, owned for the life of the instrument. No subscriptions, no renewals, no maintenance fees.

• NRZ Decoding: Decode NRZ data streams with configurable bit rate and threshold.
• Eye Diagram: Generate eye diagrams for NRZ signal quality assessment.
• Pattern Triggering: Trigger on specific bit patterns in the NRZ stream.
• Lifetime License Activation: Activate once, owned for the life of the instrument. No subscriptions, no renewals, no maintenance fees.

• PCIe Protocol Decode: Trigger and decode PCIe Gen 1/2 transactions.
• Link Training: Capture and decode LTSSM state transitions.
• TLP/DLLP Decode: Transaction and data link layer packet decoding.
• Lifetime License Activation: Activate once, owned for the life of the instrument. No subscriptions, no renewals, no maintenance fees.

• PSI5 Decoding: Sensor data frames with sync pulses, data bits, status, and CRC.
• Current-Modulated Support: Interprets data from current waveforms captured through a current probe.
• Triggering: Trigger on sensor data values, errors, or sync patterns.
• Lifetime License Activation: Activate once, owned for the life of the instrument. No subscriptions, no renewals, no maintenance fees.

• Switching Loss: Calculates energy per switching transition for MOSFETs, IGBTs. Essential for thermal design and efficiency.
• Safe Operating Area: Plots V×I trajectories against device limits during transients, startup, and faults.
• Ripple Analysis: Output ripple amplitude and frequency content. Identifies sources: switching frequency, ESR, load transients.
• Lifetime License Activation: Activate once, owned for the life of the instrument. No subscriptions, no renewals, no maintenance fees.

• SENT Triggering: Trigger on fast channel data, slow channel messages, or error conditions.
• Fast and Slow Channel Decoding: Decodes fast channel (primary sensor data) and slow channel (config/diagnostics).
• Nibble-Level Display: Individual nibble values and timing overlaid on the waveform for SAE J2716 verification.
• Lifetime License Activation: Activate once, owned for the life of the instrument. No subscriptions, no renewals, no maintenance fees.

• SMBus Decoding: Quick Command, Send/Receive Byte, Read/Write Word, Block transfers, Process Call.
• PEC Verification: Validates Packet Error Checking CRC — not available in standard I2C decode.
• Host Notify and Alert: Decodes SMBus alert protocol and host notification events.
• Lifetime License Activation: Activate once, owned for the life of the instrument. No subscriptions, no renewals, no maintenance fees.

• SPMI Decoding: Command sequences, register read/write, master/slave transactions.
• Triggering: Trigger on slave addresses, register addresses, data values, or command types.
• Multi-Master Support: Identifies transactions from multiple bus masters.
• Lifetime License Activation: Activate once, owned for the life of the instrument. No subscriptions, no renewals, no maintenance fees.

• USB 2.0 Protocol Decode: Trigger and decode USB 2.0 transactions at the packet level.
• Transaction Visibility: See setup, data, status, and handshake packets decoded on the waveform.
• Error Detection: Identifies CRC errors, timeout violations, and protocol errors.
• Lifetime License Activation: Activate once, owned for the life of the instrument. No subscriptions, no renewals, no maintenance fees.

• Bandwidth: 8GHz
• Channels: 4Ch+16D (opt)
• Sample Rate: 20GSa/s
• Memory Depth: 2Gpts (opt)
• Vertical Resolution: 12 bits
• Logic Probes: Optional

4.0 / 5.0

(1) 1 total reviews

• Voltage Out: 32V
• Current Out: 6A
• Channels: 1Ch
• Power Out: 192W
• Programmable: Yes

• Voltage Out: 30V
• Current Out: 3A
• Channels: 3Ch
• Power Out: 195W

• Voltage Out: 30V
• Current Out: 3A
• Channels: 3Ch
• Power Out: 195W
• Programmable: Yes

• Voltage Out: 30V
• Current Out: 5A
• Channels: 3Ch
• Power Out: 315W
• Programmable: Yes

• Voltage Out: 30V
• Current Out: 5A
• Channels: 4Ch
• Power Out: 328W
• Programmable: Yes

• Voltage Out: 30V
• Current Out: 5A
• Channels: 4Ch
• Power Out: 328W
• Programmable: Yes

• Voltage Out: 32V
• Current Out: 3A
• Channels: 4Ch
• Power Out: 297W
• Programmable: Yes

• Voltage Out: 40V
• Current Out: 120A
• Channels: 1Ch
• Power Out: 1200W
• Programmable: Yes

• Voltage Out: 40V
• Current Out: 200A
• Channels: 1Ch
• Power Out: 2000W
• Programmable: Yes

• Voltage Out: 40V
• Current Out: 40A
• Channels: 1Ch
• Power Out: 400W
• Programmable: Yes

• Voltage Out: 40V
• Current Out: 80A
• Channels: 1Ch
• Power Out: 800W
• Programmable: Yes

• Voltage Out: 80V
• Current Out: 100A
• Channels: 1Ch
• Power Out: 2000W
• Programmable: Yes