New

UPO6058HD

500 MHz 8Ch 12-Bit High-Resolution Oscilloscope

Name: UPO6058HD 500 MHz 8Ch 12-Bit High-Resolution Oscilloscope
Brand: UNI-T
SKU: 181100200254X
Price: 13599.00 USD
Availability: InStock

$13,599.00

Sale Contact Us For Lead Time

Backordered. Contact us for lead time.

REQUEST A QUOTE

Compare

500 MHz 8-channel 12-bit high-resolution oscilloscope with up to 5 GSa/s, 500 Mpts per channel, 500,000 wfms/s and a 12.1-inch touchscreen. Protocol decode standard; power, three-phase and timing analysis optional.

View full details

UPO6058HD | 500 MHz 8-Channel 12-Bit High-Resolution Oscilloscope

Overview

The UPO6058HD puts eight 500 MHz analog channels behind a 12-bit ADC, with up to 5 GSa/s sampling, up to 500 Mpts of memory per channel and a capture rate of 500,000 wfms/s (1,000,000 wfms/s in sequence mode), all on a 12.1-inch 1280 × 800 touchscreen.

Eight channels on one timebase cover the signals a three-phase drive or a multi-rail power system produces at once: three voltages and three currents with two channels left for control or gate signals. The 50 Ω path is specified to 500 MHz, with a calculated rise time of ≤ 0.70 ns (typical). Bandwidth can be raised later by license: UPO6000HD-BW5MT1G (500 MHz to 1 GHz) (Optional).

A spectrum analyzer (5 Mpts FFT), 4-digit digital voltmeter, 7-digit frequency counter, histograms, mask test and RS232/422/485/UART, I²C and SPI decoding are built in. Automotive, audio, MIL-STD-1553B, ARINC 429 and Manchester decoders, power and three-phase power analysis, and timing analysis are available as options. Backed by the 3+2 warranty.

Key Features

500 MHz at 50 Ω, 500 MHz at 1 MΩ — eight analog channels plus external trigger; calculated rise time ≤ 0.70 ns (typical); upgradeable by license (500 MHz to 1 GHz).
12-bit ADC — 4,096 vertical levels, 16 times an 8-bit design, with ERES extending resolution up to 16 bits.
Up to 5 GSa/s and 500 Mpts per channel — 5 GSa/s in interleaved mode, 2.5 GSa/s non-interleaved.
500,000 wfms/s with Ultra Phosphor 3.0 and 256 intensity levels; 1,000,000 wfms/s in sequence mode, with up to 400,000 frames recorded in hardware.
Protocol trigger and decode — RS232/422/485/UART, I²C and SPI included; CAN, CAN-FD, LIN, FlexRay, SENT, audio, MIL-STD-1553B, ARINC 429 and Manchester (Optional).
Power and three-phase power analysis — twelve power measurements plus three-phase power quality, harmonics, ripple, efficiency and DQ0 analysis (Optional).
Timing analysis — I²C, SPI, CAN, I²S, UART, LIN, reset and switch timing checked against limits, with report export (Optional).
56 automated measurements, 27 on screen at once, each with histogram and trend statistics; zone trigger, hardware mask test, 4-digit DVM and 7-digit counter.
12.1-inch 1280 × 800 touchscreen, fully laminated, with gesture control plus keys and optical-encoder knobs rated for 1 million rotations.
Connectivity — two USB 3.0 host ports, USB Type-C 3.0, gigabit LAN, HDMI, 10 MHz reference in/out, SCPI and a built-in web server.

Detailed Features

Eight Channels at 500 MHz

Eight 500 MHz channels, each at 12 bits, suit multi-rail power systems, motor drives and embedded boards where many signals have to be seen together. The 4,096-level ADC resolves 16 times the vertical detail of an 8-bit front end.

The 1 MΩ path is specified to the full 500 MHz, so passive probing does not give up bandwidth. ERES adds up to 4 enhanced bits, and the UPO6000HD-BW5MT1G license (Optional) raises the bandwidth to 1 GHz later.

UPO6058HD 8-bit versus 12-bit waveform detail comparison — The same signal on an 8-bit (left) and 12-bit (right) acquisition.

All-in-One Measurement Platform

The UPO6000HD combines an oscilloscope, spectrum analyzer, digital voltmeter, frequency counter and protocol analyzer as standard, with power, three-phase power and timing analysis as options, all on the same screen and timebase.

Options install from a license file on a USB drive, so capability can be added to an instrument already in use, and every option can be tried for 540 hours first.

500,000 Waveforms per Second

Ultra Phosphor 3.0 processes acquisitions at 30 Gbps through a parallel graphics-mapping matrix, capturing 500,000 wfms/s with 256 intensity levels so frequent and rare events read differently on screen. In sequence mode the capture rate rises to 1,000,000 wfms/s, with up to 400,000 frames and a minimum trigger interval under 1,000 ns.

Hardware waveform recording keeps up to 400,000 frames for frame-by-frame or continuous playback, with measurements and math on the recorded data, and the frames export to USB storage.

UPO6058HD Ultra Phosphor 3.0 intensity-graded waveform — Intensity grading shows how often each trace occurs.

UPO6058HD three-phase power quality table and phasor diagram — Three-phase power quality with the phasor diagram.

Three-Phase Power Analysis (Optional)

The UPO6000HD-PWR option includes three-phase power analysis: synchronous capture of three voltages and three currents, with one-step measurement of power quality, harmonics, ripple, efficiency and DQ0, and a live space-vector display.

With eight channels on one timebase, the UPO6058HD takes all six three-phase signals together for EV drive systems, industrial motors and renewable-energy inverters.

Power Analysis (Optional)

The same option adds twelve power measurements: power quality, harmonics, inrush current, R_DS(on), switching loss, slew rate, safe operating area, modulation, ripple, turn-on/turn-off time, transient response and efficiency. Harmonics are measured to the 40th and checked against IEC 61000-3-2 Class A, B, C or D limits.

Select the analysis, connect voltage and current probes as the on-screen diagram shows, assign the channels and read the results as waveforms, a table and statistics.

UPO6058HD power quality analysis results — Power quality results with voltage and current waveforms.

UPO6058HD RS232 decode with event list — Decoded serial traffic with the event table.

Protocol Trigger and Decode

RS232/422/485/UART, I²C and SPI trigger and decode are standard. Options add CAN, CAN-FD, LIN, FlexRay and SENT for automotive work, audio buses (I²S, left-justified, right-justified, TDM), MIL-STD-1553B and ARINC 429 avionics buses and Manchester, 12 protocols in all.

Up to four buses decode at once from any analog channel. Decoding works while stopped or recording, with an event list, search and CSV, HTML or PDF export.

Timing Analysis (Optional)

The UPO6000HD-TIMING option checks bus timing on I²C, SPI, CAN, I²S, UART and LIN, plus reset and switch sequences: pulse width, amplitude, edges, setup time and hold time.

Each parameter is compared against its limit with a pass/fail result, and the results export as a report.

UPO6058HD I2C timing analysis results table — I²C timing analysis with pass/fail per parameter.

UPO6058HD measurement statistics with frequency trend plot — Measurement statistics with a trend plot.

Measurements and Statistics

56 automated measurements cover voltage, time, area, burst, delay and phase. 27 can be on screen at once, and each one can show statistics as a histogram or a trend chart, so drift and outliers are visible without exporting data.

A parameter snapshot shows 39 items for one channel, and precision mode measures across the full memory in hardware rather than the screen record.

Zone Trigger

Draw up to two rectangles on the touchscreen and the zone trigger keeps only waveforms that cross, or avoid, those areas, which isolates an intermittent glitch without building a complex trigger. The standard set adds edge, pulse width, video, slope, runt, window, delay, timeout, duration, setup and hold, Nth edge and pattern triggers.

UPO6058HD search marks across a long acquisition — Search marks each matching event across the record.

Deep Memory with Search and Navigation

Up to 500 Mpts per channel holds long bursts at a high sample rate. Search marks every edge, pulse width, slope, runt, window, delay, timeout, duration, setup-and-hold, Nth-edge or pattern event across the record.

Results appear as an event list; select an entry to jump to it, or step through events, time positions and markers.

Hardware Mask Test

Build a limit mask from a reference waveform and the hardware-accelerated pass/fail test reports the failure rate in seconds. On failure it can stop, sound the buzzer or save a screenshot, and the result is also available on the AUX output.

It suits incoming inspection, production-line checks and longer reliability runs.

UPO6058HD pass/fail mask test — Mask test with pass/fail counts.

UPO6058HD FFT spectrum alongside time-domain waveform — Time and frequency domain on one screen.

Spectrum Analysis

The FFT runs up to 5 Mpts on four channels, with Hanning, Hamming, rectangular, Blackman and flat-top windows, a waterfall view, normal, average, max-hold and min-hold traces and automatic, manual or threshold markers.

Start, stop, center and span are set directly in frequency, so harmonics, switching noise and EMI sources can be examined alongside the time-domain view.

Voltmeter and Frequency Counter

A 4-digit DVM reads DC, AC RMS and AC+DC RMS on any analog channel with a limit alarm, and a 7-digit hardware counter measures frequency, period and totals with adjustable refresh time and resolution.

Both run alongside the waveform display, so quick checks need no second instrument.

UPO6058HD frequency counter and DVM readouts — Counter (left) and DVM (right) readouts.

Histograms and Math

Horizontal and vertical histograms quantify jitter and noise distributions, with mean, median, mode, standard deviation and peak-to-peak statistics. Up to eight math waveforms combine basic operations, low-pass, high-pass, band-pass and band-stop filters and a 21-option equation editor.

UPO6058HD controlled from a laptop browser and phone via the built-in web server — Browser-based control from a PC or mobile device.

Touchscreen, Keys and Remote Control

The 12.1-inch 1280 × 800 capacitive touchscreen is fully laminated and supports tap, drag, pinch and box-zoom gestures, while dedicated keys and optical-encoder knobs (rated for 200,000 presses and 1 million rotations) stay on the front panel. A USB mouse and keyboard also work.

Over LAN, the built-in web server shows the same display and controls in a PC or phone browser, SCPI supports automation, and the free UNI-T Instrument Manager connects over LAN or USB. Firmware updates install from a USB drive or online.

Rear-Panel Connections

Two USB 3.0 host ports, a USB Type-C 3.0 device port, gigabit LAN (VXI-11), HDMI for an external monitor, AUX output (trigger out, pass/fail, DVM), external trigger input and 10 MHz reference in and out sit on the rear panel, with a safety-lock slot.

Applications

Motor Drives and Power Conversion

Measure three voltages and three currents together for three-phase power quality, harmonics, efficiency and DQ0 analysis (Optional).
Characterise switching loss, R_DS(on), SOA and efficiency on converters and inverters with the power analysis option.
See ripple and gate-drive detail at 12 bits without switching to an averaging mode.

Automotive and Embedded Systems

Decode CAN, CAN-FD, LIN, FlexRay and SENT and verify bus timing (Optional).
Decode MIL-STD-1553B and ARINC 429 avionics buses (Optional).
Watch rails, clocks and serial lines on eight channels while I²C, SPI and UART decode runs.

Industrial Automation and Test

Debug high-channel-count systems on one timebase, with zone trigger and 400,000-frame hardware recording for intermittent faults.
Run hardware mask tests with pass/fail output on the AUX port.
Automate over SCPI and LAN, or control the scope from a browser.

Education and Research

One instrument covers oscilloscope, spectrum, DVM, counter and protocol work in a teaching or research lab.
Export waveforms, decoded events and reports as CSV, HTML or PDF.

In the Box

Power cord
8 × UT-P07A 500 MHz high-impedance passive probe (one per channel, in sets of two)
USB 3.0 data cable, USB Type-C, 1 m
Certificate of calibration
Multi-language safety precautions and English quick guide

Instrument dimensions 365 × 264 × 115 mm (W × H × D), 6.55 kg.

Recommended Add-Ons

UT-PA1000 / UT-PA2000 — 1 GHz / 2 GHz active single-ended probes.
UT-PD1500 / UT-PD2500 — 1.5 GHz / 2.5 GHz active differential probes.
UT-PR2060 — 1 GHz low-noise power rail probe.
UT-P43 / UT-P44 — 25 MHz / 50 MHz current probes for power and three-phase analysis.
UT-P31 / UT-P33 — high-voltage differential probes for line-referenced measurements.
UT-ISOT — isolation transformer.
UT-M13X — oscilloscope protocol demonstration board.
UPO6000HD-BW5MT1G — bandwidth upgrade from 500 MHz to 1 GHz (Optional).
UPO6000HD-PWR — power analysis and three-phase power analysis (Optional).
UPO6000HD-BND — all optional serial bus trigger and decode in one license (Optional).
UPO6000HD-TIMING — timing analysis (Optional).

Frequently Asked Questions

What is the difference between the six UPO6000HD models?

Bandwidth and channel count: 1 GHz (UPO6108HD, UPO6106HD), 500 MHz (UPO6058HD, UPO6056HD) or 350 MHz (UPO6038HD, UPO6036HD), each with eight or six analog channels. All share the 12-bit acquisition system, 5 GSa/s sampling, 500 Mpts per channel, 12.1-inch touchscreen and option set. The 350 MHz and 500 MHz models can be upgraded by license.

Do I get 5 GSa/s on every channel?

No. 5 GSa/s is the interleaved-mode rate; in non-interleaved mode the rate is 2.5 GSa/s. Memory is up to 500 Mpts per channel.

Does the UPO6000HD have digital channels or a built-in waveform generator?

No. The UPO6000HD is an analog-channel oscilloscope with six or eight 12-bit channels and an external trigger input. It has no logic-analyzer inputs and no built-in generator.

Which protocol decoders are standard?

RS232/422/485/UART, I²C and SPI are included. CAN, CAN-FD, LIN, FlexRay, SENT, audio, MIL-STD-1553B, ARINC 429 and Manchester are options, individually or as the UPO6000HD-BND bundle.

How does the UPO6000HD differ from the UPO6000LP?

Both are 12-bit oscilloscopes with up to 5 GSa/s sampling and up to 500 Mpts per channel. The UPO6000HD is a bench instrument with a 12.1-inch touchscreen, front-panel controls and six or eight channels; the UPO6000LP is a 1U headless rack-mount chassis with four or eight channels for automated test.

Can the UPO6058HD be upgraded later?

Yes. Bandwidth moves up with UPO6000HD-BW5MT1G (500 MHz to 1 GHz), and decode and analysis options install by license file from a USB drive (all Optional). Each option can be tried for 540 hours before purchase.

Key Specifications
Analog Bandwidth	500MHz
Channels	8Ch
Sample Rate	5GSa/s
Memory Depth	500Mpts
Vertical Resolution	12 bits
Built-in Signal Generator	Not Available
Digital Channels	Not Available
Touch Screen	✓
Instrument Type	Digital Oscilloscope