UPO6000HD-TIMING Timing Analysis Option (including I2C, SPI, CAN, I2S, Reset, Switch, UART, LIN)
Overview
The UPO6000HD-TIMING checks bus and power-sequence timing on a UPO6000HD Series oscilloscope against limits, with a pass/fail result for each parameter and an exportable report.
The option is enabled by a software license keyed to the oscilloscope's serial number and is permanent for the life of the instrument.
Key Features
- Buses — I²C, SPI, CAN, I²S, UART and LIN timing from decoded traffic.
- Sequences — reset and switch timing.
- Parameters — pulse width, amplitude, edges, rise and fall time, setup time and hold time.
- Reports — results with pass/fail status export as a test report.
When You Need This Option
- Phones, wearables, appliances and automotive electronics where bus timing must meet a specification.
- Design validation before a board goes to compliance testing.
Compatibility
For the UPO6000HD Series: UPO6108HD, UPO6106HD, UPO6058HD, UPO6056HD, UPO6038HD and UPO6036HD. Keep the oscilloscope on the latest UNI-T firmware.
Frequently Asked Questions
How is this option activated?
Buy the option key from your UNI-T distributor with the oscilloscope's serial number. Enter the key and serial number on the License Activation page of the UNI-T website to generate a license file, copy it to the root of a USB drive and activate it under Utility > Options. The Options screen then shows the option as Activated, with a trial duration of Permanent.
Can I try it first, and is the license permanent?
Yes to both. Every UPO6000HD option includes a 540-hour trial on the instrument. Once activated, the license is permanent for the life of the oscilloscope.