UPO6000HD-FLEX Automotive Serial Bus Trigger and Analysis Option (FlexRay)
Overview
The UPO6000HD-FLEX adds FlexRay trigger and decode to a UPO6000HD Series oscilloscope.
The option is enabled by a software license keyed to the oscilloscope's serial number and is permanent for the life of the instrument.
Key Features
- Trigger conditions β start, indicators, ID, cycle, header, data, ID and data, end frame and error.
- Signal and rate β BM, BDiff or BP; 2.5, 5 or 10 Mbps, or custom.
- Decode workflow β Decoding runs on up to four buses at once from any analog channel, while running, stopped or recording, with an event list, search and CSV, HTML or PDF export.
When You Need This Option
- Chassis and drive-by-wire networks that use FlexRay.
- Correlating frame timing with analog sensor signals.
Compatibility
For the UPO6000HD Series: UPO6108HD, UPO6106HD, UPO6058HD, UPO6056HD, UPO6038HD and UPO6036HD. Keep the oscilloscope on the latest UNI-T firmware.
Frequently Asked Questions
How is this option activated?
Buy the option key from your UNI-T distributor with the oscilloscope's serial number. Enter the key and serial number on the License Activation page of the UNI-T website to generate a license file, copy it to the root of a USB drive and activate it under Utility > Options. The Options screen then shows the option as Activated, with a trial duration of Permanent.
Can I try it first, and is the license permanent?
Yes to both. Every UPO6000HD option includes a 540-hour trial on the instrument. Once activated, the license is permanent for the life of the oscilloscope.