Products

• Multi-Format Support: Decodes I2S, LJ, RJ, and TDM. Configurable word size (16/24/32-bit) and channel count.
• Sample-Level Triggering: Trigger on specific audio sample values or ranges — capture clipping, silence, or test tones.
• Real-Time Decoding: Decoded samples display aligned with BCLK, LRCLK/WS, and data for timing verification.
• Lifetime License Activation: Activate once, owned for the life of the instrument. No subscriptions, no renewals, no maintenance fees.

• What's Included: 5 protocols with full trigger, decode, and search: CAN (Controller Area Network) — $279 individually CAN-FD — $279 individually FlexRay — $279 individually SENT (SAE J2716) — $279 individually LIN (Local Interconnect Network) — $279 individually
• Save $690 (49% Off): Bundle pricing vs. purchasing individually.
• Single License Key: One key unlocks all protocols. No managing separate licenses.
• Lifetime License Activation: Activate once, owned for the life of the instrument. No subscriptions, no renewals, no maintenance fees.

• Built-In AWG: Independent output channels with sine, square, ramp, pulse, noise, DC, and arbitrary waveforms. No external generator needed.
• Bode Plot Analysis: Automated frequency response — define start/stop frequency and stimulus amplitude, get gain and phase plots. Essential for filter, amplifier, and loop stability verification.
• Stimulus-Response: Generate and capture on the same instrument. No sync issues or ground loops.
• Lifetime License Activation: Activate once, owned for the life of the instrument. No subscriptions, no renewals, no maintenance fees.

• What's Included: 9 protocols with full trigger, decode, and search: CAN (Controller Area Network) — $279 individually CAN-FD — $279 individually FlexRay — $279 individually SENT (SAE J2716) — $279 individually LIN (Local Interconnect Network) — $279 individually Audio Serial Bus (I2S, LJ, RJ, TDM) — $279 individually MIL-STD-1553 — $279 individually ARINC 429 — $279 individually Manchester Encoding — $279 individually
• Save $1,382 (55% Off): Bundle pricing vs. purchasing individually.
• Single License Key: One key unlocks all protocols. No managing separate licenses.
• Lifetime License Activation: Activate once, owned for the life of the instrument. No subscriptions, no renewals, no maintenance fees.

• 350MHz → 500MHz Bandwidth: Upgrades all analog channels on your MSO3034X.
• Faster Rise Times: Higher bandwidth means accurately capturing faster edges — critical for signal integrity on high-speed interfaces.
• No Hardware Changes: Bandwidth is software-defined. Enter the key and operate at 500MHz immediately.
• Lifetime License Activation: Activate once, owned for the life of the instrument. No subscriptions, no renewals, no maintenance fees.

• Protocol-Aware Triggering: Trigger on specific CAN conditions — frame ID, data content, error frames, remote frames, or overload frames — to isolate the exact bus activity you're investigating.
• Real-Time Frame Decoding: Decoded CAN frames (arbitration ID, DLC, data payload, CRC, acknowledge) display directly on the waveform trace for signal-protocol correlation.
• Deep Memory Protocol Search: Search captured records for specific message IDs, data patterns, or error conditions across the full acquisition memory.
• Lifetime License Activation: Activate once, owned for the life of the instrument. No subscriptions, no renewals, no maintenance fees.

• Protocol-Aware Triggering: Trigger on CAN-FD conditions — frame ID, data, error frames, or bit rate switch events.
• Real-Time Frame Decoding: Decoded CAN-FD frames (ID, DLC, data, CRC, ACK) display on the waveform for protocol-electrical correlation.
• Deep Memory Search: Search captured records for specific message IDs, data patterns, or errors across the full memory.
• Lifetime License Activation: Activate once, owned for the life of the instrument. No subscriptions, no renewals, no maintenance fees.

• FlexRay Triggering: Trigger on frame ID, cycle count, payload data, indicator bits, null frames, or errors.
• Real-Time Frame Decoding: Decoded frames display with ID, payload, header CRC, and cycle info alongside the analog signal.
• Static/Dynamic Segment Visibility: Identifies static vs. dynamic segment frames for schedule table verification.
• Lifetime License Activation: Activate once, owned for the life of the instrument. No subscriptions, no renewals, no maintenance fees.

• LIN Triggering: Trigger on frame IDs, data content, checksum errors, or sync break fields.
• Real-Time Frame Decoding: Decoded LIN frames (sync, PID, data, checksum) display on the waveform trace.
• Master-Slave Timing: Shows master header and slave response timing for diagnosing timeouts and schedule issues.
• Lifetime License Activation: Activate once, owned for the life of the instrument. No subscriptions, no renewals, no maintenance fees.

• Manchester Decode: Decodes Manchester and Differential Manchester data with bit values on the waveform.
• Configurable Parameters: Set bit rate, idle polarity, and convention (IEEE 802.3 or G.E. Thomas).
• Pattern Triggering: Trigger on specific data patterns in the encoded stream.
• Lifetime License Activation: Activate once, owned for the life of the instrument. No subscriptions, no renewals, no maintenance fees.

• 1553 Triggering: Trigger on command/status/data words, RT addresses, subaddresses, or errors.
• Command/Response Decoding: Decoded transactions on the waveform — command word, status word, data words with RT address and word count.
• Response Time Measurement: Measures RT response time for compliance verification (4-12 µs requirement).
• Lifetime License Activation: Activate once, owned for the life of the instrument. No subscriptions, no renewals, no maintenance fees.

• Switching Loss: Calculates energy per switching transition for MOSFETs, IGBTs. Essential for thermal design and efficiency.
• Safe Operating Area: Plots V×I trajectories against device limits during transients, startup, and faults.
• Ripple Analysis: Output ripple amplitude and frequency content. Identifies sources: switching frequency, ESR, load transients.
• Lifetime License Activation: Activate once, owned for the life of the instrument. No subscriptions, no renewals, no maintenance fees.

• SENT Triggering: Trigger on fast channel data, slow channel messages, or error conditions.
• Fast and Slow Channel Decoding: Decodes fast channel (primary sensor data) and slow channel (config/diagnostics).
• Nibble-Level Display: Individual nibble values and timing overlaid on the waveform for SAE J2716 verification.
• Lifetime License Activation: Activate once, owned for the life of the instrument. No subscriptions, no renewals, no maintenance fees.

• Bandwidth: 200MHz
• Channels: 4Ch+16D (opt)
• Sample Rate: 2.5GSa/s
• Memory Depth: 500Mpts
• Vertical Resolution: 12 bits
• Logic Probes: Optional

• Bandwidth: 350MHz
• Channels: 4Ch+16D (opt)
• Sample Rate: 2.5GSa/s
• Memory Depth: 500Mpts
• Vertical Resolution: 12 bits
• Logic Probes: Optional

• Bandwidth: 350MHz
• Channels: 4Ch+16D (opt)
• Sample Rate: 5GSa/s
• Memory Depth: 500Mpts
• Vertical Resolution: 8 bits
• Logic Probes: Optional

• Bandwidth: 500MHz
• Channels: 4Ch+16D (opt)
• Sample Rate: 2.5GSa/s
• Memory Depth: 500Mpts
• Vertical Resolution: 12 bits
• Logic Probes: Optional

5.0 / 5.0

(1) 1 total reviews

• Bandwidth: 500MHz
• Channels: 4Ch+16D (opt)
• Sample Rate: 5GSa/s
• Memory Depth: 500Mpts
• Vertical Resolution: 8 bits
• Logic Probes: Optional

• Bandwidth: 350MHz
• Channels: 2Ch+16D
• Sample Rate: 2.5GSa/s
• Memory Depth: 250Mpts
• Vertical Resolution: 8 bits
• Logic Probes: Yes

• Bandwidth: 350MHz
• Channels: 4Ch+16D
• Sample Rate: 2.5GSa/s
• Memory Depth: 250Mpts
• Vertical Resolution: 8 bits
• Logic Probes: Yes

• Bandwidth: 350MHz
• Channels: 4Ch+16D
• Sample Rate: 2.5GSa/s
• Memory Depth: 250Mpts
• Vertical Resolution: 8 bits
• Logic Probes: Yes

• Bandwidth: 500MHz
• Channels: 2Ch+16D
• Sample Rate: 2.5GSa/s
• Memory Depth: 250Mpts
• Vertical Resolution: 8 bits
• Logic Probes: Yes

• Bandwidth: 500MHz
• Channels: 4Ch+16D
• Sample Rate: 2.5GSa/s
• Memory Depth: 250Mpts
• Vertical Resolution: 8 bits
• Logic Probes: Yes

• Bandwidth: 500MHz
• Channels: 4Ch+16D
• Sample Rate: 2.5GSa/s
• Memory Depth: 250Mpts
• Vertical Resolution: 8 bits
• Logic Probes: Yes