UT-P40 DC-100kHz 60A AC/DC Current Probe
Overview
100kHz bandwidth, 60A AC/DC current probe for oscilloscopes. Measures current waveforms non-invasively in power electronics, motor drives, and switch-mode circuits. Compatible with UNI-T oscilloscopes and most oscilloscopes with BNC inputs.
Key Features
- Non-Invasive Measurement β Clamp-on design requires no circuit interruption.
- BNC Connection β Standard BNC connector for direct connection to UNI-T oscilloscopes and other oscilloscopes.
Warranty
This product includes a standard 1-year warranty covering manufacturing defects and component failures under normal use conditions.
UNI-T stands behind every product we sell. If you experience any issues within the warranty period, our US-based support team is here to help with troubleshooting, repair, or replacement.
| CAT Rating | CAT III 600 V |
| Battery | 9 V |
| Weight | 310 g |
| Dimensions | 231 Γ 67 Γ 36 mm |
| Storage Temperature | -20 Β°C - 80 Β°C |
| Bandwidth | 100 kHz |
| Rise Time | 2.5Β΅s |
| Cable Length | 200cm |
| Operating Temperature | 0 Β°C - 50 Β°C |
| Output Sensitivity | 5 mV/A / 50 mV/A |
| Max Current | 60 A |
| DC Accuracy | Β±2% Β±0.4 A (50 mV/A range); Β±2% Β±1 A (5 mV/A range) |
| Noise | 2mVpp |
| Max Conductor Size | 10.3mm |
Data Sheets and Manuals
- Datasheet not currently available. Contact us with questions.
- Download UT-P40 Manual →
Software / Firmware Downloads
- Not currently available. Contact us with questions.
