{"product_id":"uts3084b","title":"UTS3084B 8.4GHz Performance-Series Spectrum Analyzer","description":"\u003ch1\u003eUNI-T UTS3084B 8.4GHz Performance-Series Spectrum Analyzer: 8.4 GHz Performance Spectrum Analyzer\u003c\/h1\u003e\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eUNI-T UTS3084B Performance-Series Spectrum Analyzer\u003c\/strong\u003e covers \u003cstrong\u003e9 kHz – 8.4 GHz\u003c\/strong\u003e with a 10.1-inch capacitive multi-touch display, a 1 Hz resolution-bandwidth floor, and up to 40,001 sweep points. Built for engineers who need the full sub-8.4 GHz spectrum view — wireless backhaul, sub-6 GHz cellular, microwave radio links, and broad harmonic surveys — without the cost of a microwave-class signal analyzer.\u003c\/p\u003e\n\u003cp\u003eA typical displayed average noise level of \u003cstrong\u003e-161 dBm\/Hz\u003c\/strong\u003e (preamp on) and phase noise of \u003cstrong\u003e\u0026lt;-98 dBc\/Hz\u003c\/strong\u003e at a 10 kHz offset deliver the dynamic range needed for serious signal characterization across the band. Standard interfaces include HDMI 1.4 display output, USB-A 3.0 (Host), USB-B 2.0 (Device), and Gigabit LAN with full SCPI support.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote on tracking generator:\u003c\/strong\u003e The UTS3084B does not ship with a tracking generator and cannot be field-upgraded to add one — the TG hardware is not provisioned at the chassis level. If your workflow requires scalar transmission measurements (filter sweeps, amplifier response, antenna return loss) at 8.4 GHz, the matching SKU is the \u003ca href=\"\/products\/uts3084t-8-4ghz-performance-series-spectrum-analyzer-with-tracking-generator\"\u003e\u003cstrong\u003eUTS3084T\u003c\/strong\u003e\u003c\/a\u003e, which includes a 100 kHz – 6 GHz integrated tracking generator. For 2.1 GHz or 3.6 GHz analyzers, the lower-frequency UTS3021B and UTS3036B are field-upgradeable via the UTS3000-TG option.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cdiv class=\"product-key-features\"\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e9 kHz – 8.4 GHz frequency coverage\u003c\/strong\u003e — sub-8.4 GHz for general RF dev, communications, harmonic surveys, and EMI pre-compliance work\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e-161 dBm\/Hz typical DANL\u003c\/strong\u003e (preamp on) — sensitive enough to resolve low-level signals, spurs, and harmonic energy near the noise floor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u0026lt;-98 dBc\/Hz phase noise @ 10 kHz offset\u003c\/strong\u003e (typical, 1 GHz carrier) — clean enough for close-in spectral measurements and modulated-signal analysis\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1 Hz – 3 MHz RBW\u003c\/strong\u003e in 1-3-10 steps — fine resolution control all the way down to a 1 Hz floor, with FFT mode for faster narrowband sweeps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e40,001 sweep points\u003c\/strong\u003e — deep trace detail (4× the count of UNI-T's entry tier) for catching signals that coarser analyzers miss\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e10.1-inch capacitive multi-touch display\u003c\/strong\u003e (1280 × 800) — pinch, drag, and tap to set markers, with full mouse\/keyboard support via USB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSix traces with five detector modes\u003c\/strong\u003e — Sample, Peak, Negative, Normal, Average; Clear\/Write, Average, Max Hold, Min Hold trace types\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor tracking-generator workflows at 8.4 GHz\u003c\/strong\u003e, see the matching \u003ca href=\"\/products\/uts3084t-8-4ghz-performance-series-spectrum-analyzer-with-tracking-generator\"\u003eUTS3084T\u003c\/a\u003e — the UTS3084B chassis does not support a TG upgrade\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull SCPI remote control\u003c\/strong\u003e — over USB-Device (USB-B 2.0) and LAN VXI-11 (10\/100\/1000 Base) for automated test, production lines, and unattended data collection\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOption-extensible\u003c\/strong\u003e — add \u003ca href=\"\/products\/uts3000b-ama\"\u003eUTS3000-AMA\u003c\/a\u003e (analog demodulation), \u003ca href=\"\/products\/uts3000b-amk\"\u003eUTS3000-AMK\u003c\/a\u003e (advanced measurement kit), or \u003ca href=\"\/products\/uts3000b-emi\"\u003eUTS3000-EMI\u003c\/a\u003e (EMI pre-compliance) as your work scope grows\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt to last in working environments\u003c\/strong\u003e — forced-air cooling with a user-removable dust filter to keep the internals clean across years of bench use\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eUNI-T UTS3084B Details\u003c\/h2\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eFrequency Coverage (9 kHz – 8.4 GHz)\u003c\/h3\u003e\n\u003cp\u003eThe UTS3084B sweeps continuously from 9 kHz up to \u003cstrong\u003e8.4 GHz\u003c\/strong\u003e, with 1 Hz frequency resolution and marker counter accuracy on the same order. The 8.4 GHz ceiling reaches well into C-band territory — covering all sub-6 GHz cellular (5G NR FR1, 5 GHz Wi-Fi\/Wi-Fi 6E lower bands), satellite L\/S-band downlinks, microwave point-to-point links, and a generous harmonic margin for 4 GHz transmitter and oscillator work. A 1 Hz frequency reference calibration accuracy with \u0026lt;1 ppm temperature stability keeps measurements steady across the calibration cycle.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-uts3084b-8-4ghz-performance-series-spectrum-analyzer-sweep\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTS3000B-Sweep.png\" alt=\"UNI-T UTS3084B Sweep Display\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eUNI-T UTS3084B 40,001-Point Sweep\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eSensitivity (DANL as low as -161 dBm\/Hz)\u003c\/h3\u003e\n\u003cp\u003eWeak-signal testing depends on how quiet the analyzer itself is. With the preamp on, the UTS3084B reaches a typical displayed average noise level of \u003cstrong\u003e-161 dBm\/Hz\u003c\/strong\u003e in the 200 MHz – 1.5 GHz band — low enough to resolve faint emissions, identify harmonic energy well below the carrier, and characterize signals near the noise floor. Five detector modes (Sample, Peak, Negative, Normal, Average) and four trace types give you the flexibility to tune what the trace shows for any measurement context. A switchable 20 dB preamp adds gain when you need it, and the input attenuator adjusts in 1 dB steps from 0 to 51 dB.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-uts3084b-8-4ghz-performance-series-spectrum-analyzer-sensitivity\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTS3000B-Sensitivity.png\" alt=\"UNI-T UTS3084B Sensitivity\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eUNI-T UTS3084B -161 dBm\/Hz DANL\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch3\u003ePhase Noise (\u0026lt;-98 dBc\/Hz at 10 kHz offset)\u003c\/h3\u003e\n\u003cp\u003eClean local-oscillator performance matters when you're working close to a strong carrier — modulated signal analysis, narrowband interference identification, or oscillator-quality measurement. With \u003cstrong\u003etypical phase noise of \u0026lt;-98 dBc\/Hz at a 10 kHz offset\u003c\/strong\u003e from a 1 GHz carrier (measured with a 1 kHz RBW and 10 Hz VBW), the UTS3084B resolves close-in spectral content without the phase noise pedestal washing it out. Typical performance at a 1 MHz offset is in the -112 to -116 dBc\/Hz range — well-suited for general modulated-signal and oscillator work.\u003c\/p\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003e1 Hz – 3 MHz Resolution Bandwidth\u003c\/h3\u003e\n\u003cp\u003eResolution bandwidth in 1-3-10 steps, from 1 Hz all the way to \u003cstrong\u003e3 MHz\u003c\/strong\u003e, gives you the right sweep speed \/ selectivity trade-off for any measurement. Drop the RBW to 1 Hz to separate signals closer together in frequency than most mid-tier analyzers can manage; widen it for fast high-level surveys. Bandwidth accuracy holds within 5% nominal, and switching between resolution settings introduces only ±0.2 dB relative amplitude uncertainty. The shape factor (-60 dB \/ -3 dB ratio) is \u0026lt;4.8:1 nominal — tight skirts that help you separate close-in signals of unequal amplitude. FFT sweep mode is also available for faster narrowband measurements.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-uts3084b-8-4ghz-performance-series-spectrum-analyzer-selectivity\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTS3000B-Selectivity.png\" alt=\"UNI-T UTS3084B Selectivity\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eUNI-T UTS3084B RBW Selectivity\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch3\u003e40,001 Sweep Points\u003c\/h3\u003e\n\u003cp\u003eMore points across a trace means finer frequency resolution per pixel and a much better chance of catching signals that fall between coarser bins. The UTS3084B provides up to \u003cstrong\u003e40,001 sweep points per trace\u003c\/strong\u003e — four times the count of UNI-T's entry-tier UTS1000B series, and high enough to clearly distinguish closely-spaced signals, identify intermittent emissions, and read marker frequencies with confidence. Combined with six independent traces, you can simultaneously display raw, max-hold, min-hold, and averaged versions of the same span.\u003c\/p\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003e10.1-inch Multi-Touch Interface\u003c\/h3\u003e\n\u003cp\u003eThe UTS3084B uses a 10.1-inch capacitive multi-touch display (1280 × 800 HD resolution) for direct interaction with traces, markers, and menus. Pinch, drag, and zoom directly on the trace; set markers by tapping where you want them; navigate menus the way you'd expect on a modern tablet. For lab environments where a USB mouse or keyboard is more practical, the UTS3084B accepts those through the USB Host port. The touch UI cuts measurement setup time noticeably on day-to-day bench work — especially when you're repeatedly adjusting span, RBW, and marker positions across many sweeps.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-uts3084b-8-4ghz-performance-series-spectrum-analyzer-touch\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTS3000B-Touch.png\" alt=\"UNI-T UTS3084B Touch Interface\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eUNI-T UTS3084B 10.1-inch Multi-Touch UI\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch3\u003eMarker Suite (4 Markers, 5 Functions)\u003c\/h3\u003e\n\u003cp\u003eFour markers with three modes (Normal, Delta, Fixed) cover the basic measurement vocabulary — reading absolute level, computing delta between two points, locking a marker to a frequency for sweep-to-sweep comparison. Five built-in marker functions go further: \u003cstrong\u003eMarker Noise\u003c\/strong\u003e reads noise density in dBm\/Hz at the marker, \u003cstrong\u003eBand Power\u003c\/strong\u003e integrates total power over a user-defined band, \u003cstrong\u003eBand Density\u003c\/strong\u003e reports power per Hz across that band, \u003cstrong\u003eN dB\u003c\/strong\u003e auto-finds the points N dB down from a peak (useful for measuring -3 dB or -6 dB bandwidths), and \u003cstrong\u003eCounter\u003c\/strong\u003e reads frequency to 1 Hz resolution.\u003c\/p\u003e\n\u003ch3\u003eConnectivity (HDMI, USB, LAN, 10 MHz Ref)\u003c\/h3\u003e\n\u003cp\u003eA full set of standard rear-panel interfaces makes the UTS3084B easy to fit into any workflow:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRF Input:\u003c\/strong\u003e Type-N female, 50 Ω\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHDMI 1.4 display output\u003c\/strong\u003e — mirror the trace to an external monitor for shared review or training\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB-A 3.0 Host\u003c\/strong\u003e + \u003cstrong\u003eUSB-B 2.0 Device\u003c\/strong\u003e — thumb drive, mouse\/keyboard, and SCPI over USB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLAN VXI-11 (10\/100\/1000 Base, RJ-45)\u003c\/strong\u003e — networked remote control\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e10 MHz reference in\/out\u003c\/strong\u003e (BNC) — lock to an external timebase or share the internal reference\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExternal trigger input\u003c\/strong\u003e (TTL, BNC, rising\/falling edge)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSCPI Remote Control for Automated Test\u003c\/h3\u003e\n\u003cp\u003eThe UTS3084B responds to industry-standard SCPI commands over both USB-Device (USB-B 2.0) and LAN VXI-11 (RJ-45). That means it drops cleanly into pyvisa, LabVIEW, NI-MAX, or any other test framework that talks to standard instruments — no proprietary protocol layer to learn, no special drivers beyond a USB or LAN connection. Whether you're building a production test rig, automating a parametric sweep across DUTs, or running unattended overnight data collection, the interface scales the same way the rest of the bench does. The full SCPI command set is documented in the UTS3000B Programming Manual.\u003c\/p\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eSoftware Options for Specialized Measurements\u003c\/h3\u003e\n\u003cp\u003eThe UTS3084B starts as a capable general-purpose spectrum analyzer and grows into specialized roles through software options — the instrument hardware is the same; the options unlock measurement modes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/products\/uts3000b-amk\"\u003eUTS3000-AMK\u003c\/a\u003e (Advanced Measurement Kit)\u003c\/strong\u003e — adds channel power, adjacent channel power (ACP), occupied bandwidth (OBW), time-domain power, carrier-to-noise ratio (CNR), third-order intercept (TOI), and harmonic measurements (up to the 10th harmonic), plus a spectrogram display for time-history visualization\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/products\/uts3000b-ama\"\u003eUTS3000-AMA\u003c\/a\u003e (Analog Demodulation)\u003c\/strong\u003e — AM and FM demodulation analysis with modulation rate, depth, and frequency offset measurements (20 Hz – 100 kHz modulation rate range)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/products\/uts3000b-emi\"\u003eUTS3000-EMI\u003c\/a\u003e (EMI Pre-Compliance)\u003c\/strong\u003e — CISPR-aligned QP\/AVG\/PEAK detectors, EMI band sweep, and limit-line analysis. Pairs with the optional \u003ca href=\"\/products\/uts-emi01-near-field-probe-kit\"\u003eUTS-EMI01 near-field probe kit\u003c\/a\u003e (3 mm to 10 cm probes, 30 MHz – 3 GHz) for board-level emission hunting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-uts3084b-8-4ghz-performance-series-spectrum-analyzer-options-emi\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTS3000B-EMI.png\" alt=\"UNI-T UTS3084B EMI Pre-Compliance with UTS-EMI01 Probes\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eUNI-T UTS3084B EMI Pre-Compliance Mode\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eBuilt for Working Lab Environments\u003c\/h3\u003e\n\u003cp\u003eA spectrum analyzer that lives next to soldering stations, drilling, and general bench work will breathe in dust over time. The UTS3084B addresses this with forced-air cooling and a \u003cstrong\u003euser-removable dust filter\u003c\/strong\u003e — pop it out, vacuum or blow it off, and slide it back. No tools, no service-center trip, no fan failures from dust accumulation. Operating range is 0 °C to +40 °C, storage to -20 °C \/ +70 °C, with full ±1 ppm timebase stability across the operational temperature range. The full IEC 61326 EMC compliance and EN 61010 safety qualification (with cETLus mark) round out a unit built to hold up across years of bench use.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-uts3084b-8-4ghz-performance-series-spectrum-analyzer-dust\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTS3000B-Dust.png\" alt=\"UNI-T UTS3084B Removable Dust Filter\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eUNI-T UTS3084B User-Removable Dust Filter\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ca id=\"lb-uts3084b-8-4ghz-performance-series-spectrum-analyzer-sweep\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTS3000B-Sweep.png\" alt=\"UNI-T UTS3084B Sweep Display\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eUNI-T UTS3084B 40,001-Point Sweep\u003c\/span\u003e\n\u003c\/a\u003e\n\u003ca id=\"lb-uts3084b-8-4ghz-performance-series-spectrum-analyzer-sensitivity\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTS3000B-Sensitivity.png\" alt=\"UNI-T UTS3084B Sensitivity\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eUNI-T UTS3084B -161 dBm\/Hz DANL\u003c\/span\u003e\n\u003c\/a\u003e\n\u003ca id=\"lb-uts3084b-8-4ghz-performance-series-spectrum-analyzer-selectivity\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTS3000B-Selectivity.png\" alt=\"UNI-T UTS3084B Selectivity\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eUNI-T UTS3084B RBW Selectivity\u003c\/span\u003e\n\u003c\/a\u003e\n\u003ca id=\"lb-uts3084b-8-4ghz-performance-series-spectrum-analyzer-touch\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTS3000B-Touch.png\" alt=\"UNI-T UTS3084B Touch Interface\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eUNI-T UTS3084B 10.1-inch Multi-Touch UI\u003c\/span\u003e\n\u003c\/a\u003e\n\u003ca id=\"lb-uts3084b-8-4ghz-performance-series-spectrum-analyzer-options-emi\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTS3000B-EMI.png\" alt=\"UNI-T UTS3084B EMI Pre-Compliance with UTS-EMI01 Probes\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eUNI-T UTS3084B EMI Pre-Compliance Mode\u003c\/span\u003e\n\u003c\/a\u003e\n\u003ca id=\"lb-uts3084b-8-4ghz-performance-series-spectrum-analyzer-dust\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTS3000B-Dust.png\" alt=\"UNI-T UTS3084B Removable Dust Filter\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eUNI-T UTS3084B User-Removable Dust Filter\u003c\/span\u003e\n\u003c\/a\u003e\n\u003ch2\u003eApplications\u003c\/h2\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch3\u003eRF Design and Validation (sub-8.4 GHz)\u003c\/h3\u003e\n\u003cp\u003eCharacterize transmit spectrum, harmonics, spurious emissions, and channel power across the design workflow — from prototype board bringup through pre-production characterization. The UTS3084B covers 5G NR FR1 (n78\/n77\/n79 and below), sub-6 GHz cellular, Wi-Fi 5\/6 (including Wi-Fi 6E lower band), C-band microwave links, sub-6 GHz radar bands, and broad harmonic-margin coverage for transmitter work up through 4 GHz fundamentals. With the AMK option, ACP and OBW measurements add channel-respect verification for designs targeting tight regulatory band edges.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch3\u003eCommunications and IoT Module Verification\u003c\/h3\u003e\n\u003cp\u003eProduction engineering and incoming-inspection workflows for wireless modules — verify TX power, occupied bandwidth, harmonic emissions, and spurious responses against datasheet specs and regulatory limits. SCPI automation lets you build a repeatable production test station around the analyzer, with pass\/fail logging against limit lines.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch3\u003eEMI Pre-Compliance Investigation\u003c\/h3\u003e\n\u003cp\u003eCatch radiated and conducted emissions issues before sending boards to a full CISPR\/FCC compliance lab. With the \u003ca href=\"\/products\/uts3000b-emi\"\u003eUTS3000-EMI\u003c\/a\u003e option plus the \u003ca href=\"\/products\/uts-emi01-near-field-probe-kit\"\u003eUTS-EMI01 near-field probe kit\u003c\/a\u003e (3 mm to 10 cm probes, 30 MHz – 3 GHz), the UTS3084B becomes a board-level emission hunter — sweep with QP\/AVG\/PEAK detectors, overlay limit lines, and localize hot spots on the PCB before they cost you a failed compliance test.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch3\u003eProduction Test and Quality Control\u003c\/h3\u003e\n\u003cp\u003eSCPI automation over USB or LAN (VXI-11) lets the UTS3084B drop into pyvisa, LabVIEW, or NI-TestStand workflows for repeatable production verification. Run end-of-line tests on transmitter modules, RF amplifier gain stages, oscillator output, or filter assemblies; log pass\/fail results against limit lines; and feed data into MES or QC databases. Six independent traces, max-hold detection, and 40,001-point sweeps give production-engineering teams the trace depth needed to catch intermittent issues that single-sweep tests miss.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch3\u003eRF Service, Repair, and Maintenance\u003c\/h3\u003e\n\u003cp\u003eA capable bench instrument for two-way radio shops, broadcast engineering, antenna service work, and field calibration support. Marker counter functions, harmonic measurements (with AMK), and the touch interface make routine service work quick. The 8.4 GHz ceiling covers commercial broadcast, public-safety and amateur radio, broadcast TV harmonics, and (on 3.6 GHz+ units) sub-6 GHz wireless infrastructure.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eAccessories and Family Options\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eIf you need a tracking generator at 8.4 GHz:\u003c\/strong\u003e the matching SKU is the \u003ca href=\"\/products\/uts3084t-8-4ghz-performance-series-spectrum-analyzer-with-tracking-generator\"\u003e\u003cstrong\u003eUTS3084T\u003c\/strong\u003e\u003c\/a\u003e — same 8.4 GHz analyzer, with an integrated 100 kHz – 6 GHz tracking generator. The UTS3084B chassis does not accept a TG upgrade.\u003c\/p\u003e\n\u003ch3\u003eIncluded with Every Unit\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUTS3000B-series Spectrum Analyzer (UTS3084B)\u003c\/li\u003e\n\u003cli\u003ePower cord\u003c\/li\u003e\n\u003cli\u003eUSB cable (UT-D04)\u003c\/li\u003e\n\u003cli\u003eEnglish download guide\u003c\/li\u003e\n\u003cli\u003eMulti-language safety manual\u003c\/li\u003e\n\u003cli\u003eFactory calibration certificate\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eRecommended Software Options\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/uts3000b-amk\"\u003eUTS3000-AMK\u003c\/a\u003e — Advanced Measurement Kit (channel power, ACP, OBW, CNR, TOI, harmonics, spectrogram)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/uts3000b-ama\"\u003eUTS3000-AMA\u003c\/a\u003e — Analog Demodulation Analysis (AM and FM)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/uts3000b-emi\"\u003eUTS3000-EMI\u003c\/a\u003e — EMI Pre-Compliance (CISPR-aligned QP\/AVG\/PEAK detectors, limit-line analysis)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eRecommended Accessories\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/uts-emi01-near-field-probe-kit\"\u003eUTS-EMI01 Near-Field Probe Kit\u003c\/a\u003e — Four probes (30 MHz – 3 GHz, 3 mm to 10 cm resolution) for PCB-level emission hunting with the UTS3000-EMI option\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/ut-ck01-utility-kit\"\u003eUT-CK01 Utility Kit\u003c\/a\u003e — SMA\/N adapters, cables, and antennas for general RF setup\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/ut-w01-6ghz-n-n-rf-cable\"\u003eUT-W01-6GHz Cable\u003c\/a\u003e — N-to-N RF cable, 0.7 m, DC – 6 GHz\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/ut-w02-6ghz-n-sma-rf-cable\"\u003eUT-W02-6GHz Cable\u003c\/a\u003e — N-to-SMA RF cable, 0.7 m, DC – 6 GHz\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFamily Members\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/uts3021b-2-1ghz-performance-series-spectrum-analyzer\"\u003eUTS3021B\u003c\/a\u003e — 2.1 GHz, TG-upgradeable via UTS3000-TG option\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/uts3036b-3-6ghz-performance-series-spectrum-analyzer\"\u003eUTS3036B\u003c\/a\u003e — 3.6 GHz, TG-upgradeable via UTS3000-TG option\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUTS3084B\u003c\/strong\u003e — 8.4 GHz, no TG \u003cem\u003e(this product)\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/uts3084t-8-4ghz-performance-series-spectrum-analyzer-with-tracking-generator\"\u003eUTS3084T\u003c\/a\u003e — 8.4 GHz with integrated tracking generator\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eWhat's the DANL of the UTS3084B, and what does that mean for my measurements?\u003c\/p\u003e\n\u003cp\u003eThe UTS3084B reaches a typical displayed average noise level of \u003cstrong\u003e-161 dBm\/Hz\u003c\/strong\u003e with the preamp on in the 200 MHz – 1.5 GHz band. Practically: signals down around -120 dBm are visible above the noise floor with reasonable RBW settings (e.g., 1 kHz). For ultimate weak-signal work, narrow the RBW (each 10× reduction drops the noise floor by 10 dB) and enable averaging across multiple sweeps.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eWhy doesn't the UTS3084B support a tracking generator upgrade?\u003c\/p\u003e\n\u003cp\u003eThe UTS3084B chassis is not provisioned for tracking-generator hardware — the TG board and the front-panel TG output connector aren't included in the design. The TG-upgrade option (UTS3000-TG) is only available for the lower-frequency UTS3021B and UTS3036B in this family. If you need 8.4 GHz analyzer coverage with a built-in tracking generator, the matching SKU is the \u003ca href=\"\/products\/uts3084t-8-4ghz-performance-series-spectrum-analyzer-with-tracking-generator\"\u003e\u003cstrong\u003eUTS3084T\u003c\/strong\u003e\u003c\/a\u003e, which includes a 100 kHz – 6 GHz integrated TG. For transmission measurements above 6 GHz, both the UTS3084B and UTS3084T work as receivers with an external swept source.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eHow does the UTS3084B compare to the UTS3000T+ Performance series?\u003c\/p\u003e\n\u003cp\u003eThe UTS3000B\/T family and the newer UTS3000T+ family share core architecture — the same 10.1-inch multi-touch UI, the same 40,001-point sweeps, -161 dBm DANL, and \u0026lt;-98 dBc\/Hz phase noise. The \u003cstrong\u003eUTS3000T+\u003c\/strong\u003e family steps up to typically -164 to -165 dBm DANL, adds features like a waterfall display, peak tables, and VSWR\/return-loss measurement modes, and bundles the tracking generator as standard across all SKUs. For production validation, RF service work, EMI pre-compliance, and IoT\/wireless module verification at the sub-8.4 GHz workload, the UTS3084B is well-matched at a lower price point. For new RF design work where the newer feature set and additional measurement margin matter, the UTS3000T+ family is the active upgrade path within UNI-T's spectrum analyzer lineup.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eWhat software options are available, and what do they add?\u003c\/p\u003e\n\u003cp\u003eThree software options expand the UTS3084B's measurement capabilities: \u003cstrong\u003e\u003ca href=\"\/products\/uts3000b-amk\"\u003eUTS3000-AMK\u003c\/a\u003e\u003c\/strong\u003e (Advanced Measurement Kit) adds channel power, ACP, OBW, time-domain power, CNR, TOI, and harmonic measurements with a spectrogram display. \u003cstrong\u003e\u003ca href=\"\/products\/uts3000b-ama\"\u003eUTS3000-AMA\u003c\/a\u003e\u003c\/strong\u003e adds AM\/FM analog demodulation analysis. \u003cstrong\u003e\u003ca href=\"\/products\/uts3000b-emi\"\u003eUTS3000-EMI\u003c\/a\u003e\u003c\/strong\u003e adds CISPR-aligned EMI pre-compliance with QP\/AVG\/PEAK detectors and limit-line support — it pairs with the optional \u003ca href=\"\/products\/uts-emi01-near-field-probe-kit\"\u003eUTS-EMI01 near-field probe kit\u003c\/a\u003e for PCB-level emission localization.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eIs the UTS3084B suitable for automated test (ATE)?\u003c\/p\u003e\n\u003cp\u003eYes. The UTS3084B accepts standard SCPI commands over USB-Device (USB-B 2.0) and LAN VXI-11 (RJ-45). It drops into pyvisa, LabVIEW, NI-MAX, or any framework that talks to standard test instruments — no proprietary driver layer required beyond a USB or LAN connection. The full SCPI command set is documented in the UTS3000B Programming Manual.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003c\/div\u003e","brand":"UNI-T","offers":[{"title":"Default Title","offer_id":47049681305884,"sku":"181200100020X","price":4719.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UTS3084B_Cables.jpg?v=1720807563","url":"https:\/\/uni-trendus.com\/products\/uts3084b","provider":"Uni-Trend US","version":"1.0","type":"link"}