{"product_id":"uts3036tplus","title":"UTS3036T+ 3.6 GHz Spectrum Analyzer with Tracking Generator","description":"\u003ch1\u003eUTS3036T+ \/ UTS3084T+ UTS3000T+ Performance-Series Spectrum Analyzer with Tracking Generator\u003c\/h1\u003e\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eUTS3036T+\u003c\/strong\u003e and \u003cstrong\u003eUTS3084T+\u003c\/strong\u003e extend spectrum coverage to 3.6 GHz and 8.4 GHz with a 40,001-point sweep engine and six traces. For RF design work above the common sub-3 GHz bands — higher-order harmonics, wideband spurious search, and signals that need fine frequency resolution across a wide span — the deeper sweep and the 8.4 GHz reach of the UTS3084T+ are the reason to choose this pair.\u003c\/p\u003e\n\u003cp\u003eTypical displayed average noise level reaches −165 dBm with the preamp on (a shared series figure for both models), phase noise is −98 dBc\/Hz typical at 10 kHz offset, and full-amplitude accuracy is under 0.7 dB. The tracking generator is built in and standard; analog demodulation, the advanced measurement kit and EMI pre-compliance are field-installable options.\u003c\/p\u003e\n\u003cp\u003eA 10.1-inch 1280×800 capacitive touch screen and full SCPI control over USB and LAN support scripted overnight sweeps across frequency, level and span.\u003c\/p\u003e\n\u003c\/div\u003e\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eChoosing Your Model — UTS3000T+ Performance-Series\u003c\/h2\u003e\n\u003cp\u003eThe UTS3000T+ name spans two materially different instrument classes. The four models below do not share the same sweep engine, trace count or demodulation capability — the differences go well beyond frequency reach. Compare the full series before selecting:\u003c\/p\u003e\n\u003ctable class=\"product-spec-table\" style=\"table-layout:fixed;width:100%\"\u003e\n\u003ccolgroup\u003e\n\u003ccol style=\"width:28%\"\u003e\n\u003ccol style=\"width:18%\"\u003e\n\u003ccol style=\"width:18%\"\u003e\n\u003ccol style=\"width:18%\"\u003e\n\u003ccol style=\"width:18%\"\u003e\n\u003c\/colgroup\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eUTS3015T+\u003c\/th\u003e\n\u003cth\u003eUTS3032T+\u003c\/th\u003e\n\u003cth\u003eUTS3036T+\u003c\/th\u003e\n\u003cth\u003eUTS3084T+\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency range\u003c\/td\u003e\n\u003ctd\u003e9 kHz – 1.5 GHz\u003c\/td\u003e\n\u003ctd\u003e9 kHz – 3.2 GHz\u003c\/td\u003e\n\u003ctd\u003e9 kHz – 3.6 GHz\u003c\/td\u003e\n\u003ctd\u003e9 kHz – 8.4 GHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSweep (scan) points\u003c\/td\u003e\n\u003ctd\u003e10,001\u003c\/td\u003e\n\u003ctd\u003e10,001\u003c\/td\u003e\n\u003ctd\u003e40,001\u003c\/td\u003e\n\u003ctd\u003e40,001\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTraces\u003c\/td\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003ctd\u003e6\u003c\/td\u003e\n\u003ctd\u003e6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAnalog demodulation (option)\u003c\/td\u003e\n\u003ctd\u003eAM, FM\u003c\/td\u003e\n\u003ctd\u003eAM, FM\u003c\/td\u003e\n\u003ctd\u003eAM, FM, PM\u003c\/td\u003e\n\u003ctd\u003eAM, FM, PM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTracking generator range\u003c\/td\u003e\n\u003ctd\u003e100 kHz – 1.5 GHz\u003c\/td\u003e\n\u003ctd\u003e10 MHz – 3.2 GHz\u003c\/td\u003e\n\u003ctd\u003e100 kHz – 3.6 GHz\u003c\/td\u003e\n\u003ctd\u003e100 kHz – 6 GHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eResolution bandwidth\u003c\/td\u003e\n\u003ctd\u003e1 Hz – 3 MHz\u003c\/td\u003e\n\u003ctd\u003e1 Hz – 3 MHz\u003c\/td\u003e\n\u003ctd\u003e1 Hz – 3 MHz\u003c\/td\u003e\n\u003ctd\u003e1 Hz – 3 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBuilt-in tracking generator\u003c\/td\u003e\n\u003ctd\u003eStandard\u003c\/td\u003e\n\u003ctd\u003eStandard\u003c\/td\u003e\n\u003ctd\u003eStandard\u003c\/td\u003e\n\u003ctd\u003eStandard\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eWithin the UTS3015T+\/UTS3032T+ class, choose by frequency reach (1.5 GHz vs 3.2 GHz). Within the UTS3036T+\/UTS3084T+ class, choose 3.6 GHz or 8.4 GHz reach. Across classes the UTS3036T+\/UTS3084T+ models add a 40,001-point sweep (4× the depth), six traces instead of four, and PM demodulation in addition to AM\/FM — confirm which class a model belongs to before assuming a shared specification.\u003c\/p\u003e\n\u003c\/div\u003e\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cdiv class=\"product-key-features\"\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpectrum analysis to 3.6 GHz or 8.4 GHz\u003c\/strong\u003e — 9 kHz lower edge to 3.6 GHz (UTS3036T+) or 8.4 GHz (UTS3084T+), reaching higher harmonics and wideband signals the sub-3 GHz class cannot.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e40,001 sweep points, six traces\u003c\/strong\u003e — Four times the sweep depth of the entry pair, with six independent traces for simultaneous live, reference and limit comparison.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt-in tracking generator\u003c\/strong\u003e — Standard on both models — scalar network response on filters, amplifiers and cables; TG output to 6 GHz on the UTS3084T+.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e−165 dBm typical DANL (preamp on)\u003c\/strong\u003e — Low displayed average noise level (10–200 MHz band) for weak-signal and low-level emissions work — a shared series figure, the same for both models.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReflection measurement (S11)\u003c\/strong\u003e — Return loss, VSWR and reflection coefficient with the optional VSWR bridge.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1 Hz to 3 MHz RBW, \u0026lt; 4.8:1 shape factor\u003c\/strong\u003e — Fine resolution and selectivity for closely spaced unequal-amplitude signals.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhase noise to −110 dBc\/Hz at 1 MHz\u003c\/strong\u003e — Close-in phase-noise figures suited to oscillator and synthesizer characterization.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull SCPI remote control\u003c\/strong\u003e — USB and LAN (VXI11) for automated frequency\/level\/span sweeps.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEMI pre-compliance and analog demodulation options\u003c\/strong\u003e — CISPR-aware screening with quasi-peak\/EMI-average detectors; AM\/FM\/PM demodulation with SINAD and THD readout.\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/div\u003e\n\u003c\/div\u003e\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eUNI-T UTS3000T+ Performance-Series Details\u003c\/h2\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eFrequency Reach to 8.4 GHz\u003c\/h3\u003e\n\u003cp\u003eThe UTS3036T+ sweeps 9 kHz to 3.6 GHz; the UTS3084T+ to 8.4 GHz. The higher ceiling captures the third and higher harmonics of sub-3 GHz carriers and wideband spurious content that a 3 GHz-class analyzer cannot reach.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\u003ca href=\"#lb-uts3036tplus-3-6ghz-analyzer-frequency-reach-to-8-4-ghz\" class=\"product-thumb-link\"\u003e\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTS3000Tplus_front.png\" alt=\"UNI-T UTS3000T+ Performance-Series 9 kHz to 8.4 GHz coverage\" class=\"product-image-thumb\"\u003e\u003c\/a\u003e\u003cfigcaption class=\"product-figcaption\"\u003e9 kHz to 8.4 GHz coverage\u003c\/figcaption\u003e\u003c\/figure\u003e\u003ca id=\"lb-uts3036tplus-3-6ghz-analyzer-frequency-reach-to-8-4-ghz\" href=\"#_\" class=\"product-lightbox\"\u003e\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTS3000Tplus_front.png\" alt=\"UNI-T UTS3000T+ Performance-Series 9 kHz to 8.4 GHz coverage\"\u003e\u003cspan class=\"lightbox-caption\"\u003e9 kHz to 8.4 GHz coverage\u003c\/span\u003e\u003c\/a\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003e40,001-Point Sweep\u003c\/h3\u003e\n\u003cp\u003eEach trace carries 40,001 points — four times the entry pair — so a wide span still resolves narrow signals without sacrificing the span to keep frequency resolution. This is the practical difference when searching a multi-GHz window for a single spur.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\u003ca href=\"#lb-uts3036tplus-3-6ghz-analyzer-40-001-point-sweep\" class=\"product-thumb-link\"\u003e\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTS3000Tplus_sweep-points.png\" alt=\"UNI-T UTS3000T+ Performance-Series 40,001-point sweep\" class=\"product-image-thumb\"\u003e\u003c\/a\u003e\u003cfigcaption class=\"product-figcaption\"\u003e40,001-point sweep\u003c\/figcaption\u003e\u003c\/figure\u003e\u003ca id=\"lb-uts3036tplus-3-6ghz-analyzer-40-001-point-sweep\" href=\"#_\" class=\"product-lightbox\"\u003e\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTS3000Tplus_sweep-points.png\" alt=\"UNI-T UTS3000T+ Performance-Series 40,001-point sweep\"\u003e\u003cspan class=\"lightbox-caption\"\u003e40,001-point sweep\u003c\/span\u003e\u003c\/a\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eSix Traces and Detector Modes\u003c\/h3\u003e\n\u003cp\u003eSix independent traces with Sample, Peak, Negative, Normal and Average detectors allow live, max-hold, reference and limit traces on screen at once — useful when comparing a measured spectrum against a stored mask.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\u003ca href=\"#lb-uts3036tplus-3-6ghz-analyzer-six-traces-and-detector-modes\" class=\"product-thumb-link\"\u003e\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTS3000Tplus_6-six-traces.png\" alt=\"UNI-T UTS3000T+ Performance-Series Six traces, five detectors\" class=\"product-image-thumb\"\u003e\u003c\/a\u003e\u003cfigcaption class=\"product-figcaption\"\u003eSix traces, five detectors\u003c\/figcaption\u003e\u003c\/figure\u003e\u003ca id=\"lb-uts3036tplus-3-6ghz-analyzer-six-traces-and-detector-modes\" href=\"#_\" class=\"product-lightbox\"\u003e\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTS3000Tplus_6-six-traces.png\" alt=\"UNI-T UTS3000T+ Performance-Series Six traces, five detectors\"\u003e\u003cspan class=\"lightbox-caption\"\u003eSix traces, five detectors\u003c\/span\u003e\u003c\/a\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eSensitivity and Phase Noise\u003c\/h3\u003e\n\u003cp\u003eTypical displayed average noise level reaches −165 dBm with the preamp on (10–200 MHz band) — a shared series figure for both models. Phase noise is −98 dBc\/Hz typical at 10 kHz and reaches −110 dBc\/Hz at 1 MHz offset on the UTS3084T+, relevant when measuring a clean source close to the carrier.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\u003ca href=\"#lb-uts3036tplus-3-6ghz-analyzer-sensitivity-and-phase-noise\" class=\"product-thumb-link\"\u003e\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTS3000Tplus_phase-noise.png\" alt=\"UNI-T UTS3000T+ Performance-Series DANL and close-in phase noise\" class=\"product-image-thumb\"\u003e\u003c\/a\u003e\u003cfigcaption class=\"product-figcaption\"\u003eDANL and close-in phase noise\u003c\/figcaption\u003e\u003c\/figure\u003e\u003ca id=\"lb-uts3036tplus-3-6ghz-analyzer-sensitivity-and-phase-noise\" href=\"#_\" class=\"product-lightbox\"\u003e\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTS3000Tplus_phase-noise.png\" alt=\"UNI-T UTS3000T+ Performance-Series DANL and close-in phase noise\"\u003e\u003cspan class=\"lightbox-caption\"\u003eDANL and close-in phase noise\u003c\/span\u003e\u003c\/a\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eResolution Bandwidth and Selectivity\u003c\/h3\u003e\n\u003cp\u003eRBW 1 Hz to 3 MHz in 1-3-10 steps with a \u0026lt; 4.8:1 shape factor resolves a weak product sitting next to a strong carrier.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\u003ca href=\"#lb-uts3036tplus-3-6ghz-analyzer-resolution-bandwidth-and-selectivity\" class=\"product-thumb-link\"\u003e\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTS3000Tplus_rbw.png\" alt=\"UNI-T UTS3000T+ Performance-Series 1 Hz to 3 MHz RBW\" class=\"product-image-thumb\"\u003e\u003c\/a\u003e\u003cfigcaption class=\"product-figcaption\"\u003e1 Hz to 3 MHz RBW\u003c\/figcaption\u003e\u003c\/figure\u003e\u003ca id=\"lb-uts3036tplus-3-6ghz-analyzer-resolution-bandwidth-and-selectivity\" href=\"#_\" class=\"product-lightbox\"\u003e\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTS3000Tplus_rbw.png\" alt=\"UNI-T UTS3000T+ Performance-Series 1 Hz to 3 MHz RBW\"\u003e\u003cspan class=\"lightbox-caption\"\u003e1 Hz to 3 MHz RBW\u003c\/span\u003e\u003c\/a\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eReflection Measurement\u003c\/h3\u003e\n\u003cp\u003eWith the optional VSWR bridge and the built-in tracking source, the analyzer measures S11 return loss, reflection coefficient and VSWR after an Open calibration — antenna and cable verification on the same instrument.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\u003ca href=\"#lb-uts3036tplus-3-6ghz-analyzer-reflection-measurement\" class=\"product-thumb-link\"\u003e\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTS3000Tplus_vswr.png\" alt=\"UNI-T UTS3000T+ Performance-Series S11 \/ return loss \/ VSWR\" class=\"product-image-thumb\"\u003e\u003c\/a\u003e\u003cfigcaption class=\"product-figcaption\"\u003eS11 \/ return loss \/ VSWR\u003c\/figcaption\u003e\u003c\/figure\u003e\u003ca id=\"lb-uts3036tplus-3-6ghz-analyzer-reflection-measurement\" href=\"#_\" class=\"product-lightbox\"\u003e\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTS3000Tplus_vswr.png\" alt=\"UNI-T UTS3000T+ Performance-Series S11 \/ return loss \/ VSWR\"\u003e\u003cspan class=\"lightbox-caption\"\u003eS11 \/ return loss \/ VSWR\u003c\/span\u003e\u003c\/a\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eEMI Pre-Compliance Screening (Option)\u003c\/h3\u003e\n\u003cp\u003eWith the optional UTS3000-EMI kit the analyzer operates as a CISPR-aware screening receiver: −6 dB resolution bandwidths of 200 Hz, 9 kHz, 120 kHz and 1 MHz; Peak, Negative-Peak, Quasi-Peak, EMI-Average and Average detectors; up to three concurrent meter traces; and editable limit-line sets for FCC, EN, MIL-STD-461, DO-160, VCCI and custom standards. A Scan \/ Search \/ Measure sequence with output report supports near-field-probe emissions screening before committing to chamber time.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\u003ca href=\"#lb-uts3036tplus-3-6ghz-analyzer-emi-pre-compliance-screening-option\" class=\"product-thumb-link\"\u003e\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTS3000Tplus_EMI-frequency-scan.png\" alt=\"UNI-T UTS3000T+ Performance-Series CISPR-aware EMI frequency scan\" class=\"product-image-thumb\"\u003e\u003c\/a\u003e\u003cfigcaption class=\"product-figcaption\"\u003eCISPR-aware EMI frequency scan\u003c\/figcaption\u003e\u003c\/figure\u003e\u003ca id=\"lb-uts3036tplus-3-6ghz-analyzer-emi-pre-compliance-screening-option\" href=\"#_\" class=\"product-lightbox\"\u003e\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTS3000Tplus_EMI-frequency-scan.png\" alt=\"UNI-T UTS3000T+ Performance-Series CISPR-aware EMI frequency scan\"\u003e\u003cspan class=\"lightbox-caption\"\u003eCISPR-aware EMI frequency scan\u003c\/span\u003e\u003c\/a\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eAnalog Demodulation Analysis (Option)\u003c\/h3\u003e\n\u003cp\u003eThe optional UTS3000-AMA kit adds AM, FM and PM demodulation. Modulation rate covers 20 Hz to 100 kHz; AM depth 5–95%; FM offset 1 kHz to 400 kHz; PM phase deviation 0.2 to 6.28 rad. The result window reports modulation depth, carrier power, modulation frequency, SINAD and THD — enough to verify a transmitter's modulation quality from the same bench.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\u003ca href=\"#lb-uts3036tplus-3-6ghz-analyzer-analog-demodulation-analysis-option\" class=\"product-thumb-link\"\u003e\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTS3000Tplus_modulation-analysis.png\" alt=\"UNI-T UTS3000T+ Performance-Series AM\/FM\/PM demodulation, SINAD\/THD\" class=\"product-image-thumb\"\u003e\u003c\/a\u003e\u003cfigcaption class=\"product-figcaption\"\u003eAM\/FM\/PM demodulation, SINAD\/THD\u003c\/figcaption\u003e\u003c\/figure\u003e\u003ca id=\"lb-uts3036tplus-3-6ghz-analyzer-analog-demodulation-analysis-option\" href=\"#_\" class=\"product-lightbox\"\u003e\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTS3000Tplus_modulation-analysis.png\" alt=\"UNI-T UTS3000T+ Performance-Series AM\/FM\/PM demodulation, SINAD\/THD\"\u003e\u003cspan class=\"lightbox-caption\"\u003eAM\/FM\/PM demodulation, SINAD\/THD\u003c\/span\u003e\u003c\/a\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eAdvanced One-Key Measurements (Option)\u003c\/h3\u003e\n\u003cp\u003eThe optional UTS3000-AMK kit adds channel power, power spectral density, adjacent-channel power, occupied bandwidth, transmit frequency error, zero-span (time-domain) power, carrier-to-noise ratio, third-order intercept and harmonic measurement to the 10th order, plus a spectrogram monitor — the transmitter-test set used in design verification.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\u003ca href=\"#lb-uts3036tplus-3-6ghz-analyzer-advanced-one-key-measurements-option\" class=\"product-thumb-link\"\u003e\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTS3000Tplus_adjacent-channel-power.png\" alt=\"UNI-T UTS3000T+ Performance-Series One-key transmitter measurements\" class=\"product-image-thumb\"\u003e\u003c\/a\u003e\u003cfigcaption class=\"product-figcaption\"\u003eOne-key transmitter measurements\u003c\/figcaption\u003e\u003c\/figure\u003e\u003ca id=\"lb-uts3036tplus-3-6ghz-analyzer-advanced-one-key-measurements-option\" href=\"#_\" class=\"product-lightbox\"\u003e\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTS3000Tplus_adjacent-channel-power.png\" alt=\"UNI-T UTS3000T+ Performance-Series One-key transmitter measurements\"\u003e\u003cspan class=\"lightbox-caption\"\u003eOne-key transmitter measurements\u003c\/span\u003e\u003c\/a\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eApplications\u003c\/h2\u003e\n\u003ch3\u003eRF and Wireless Design Engineering\u003c\/h3\u003e\n\u003cp\u003eAbove 3 GHz the work is harmonic and spurious search, wideband signal characterization, and source verification. The 8.4 GHz reach of the UTS3084T+ captures the higher harmonics of a sub-3 GHz design; the 40,001-point sweep keeps narrow signals resolved across a multi-GHz span; and the close-in phase-noise figures support oscillator and synthesizer characterization. Full SCPI over LAN runs the level- and frequency-stepped sweeps a characterization report needs, unattended.\u003c\/p\u003e\n\u003ch3\u003ePre-Compliance and Multi-Function Test Benches\u003c\/h3\u003e\n\u003cp\u003eFor a lab that needs more than one instrument's worth of capability per bench, this pair consolidates spectrum analysis, scalar network response via the built-in tracking generator, reflection measurement, AM\/FM\/PM demodulation and CISPR-aware EMI screening into one instrument. Early emissions screening with a near-field probe set catches problems before chamber time; the advanced-measurement kit covers the transmitter test set for design verification — all option installs, no recurring license.\u003c\/p\u003e\n\u003c\/div\u003e\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eAccessories and Family Options\u003c\/h2\u003e\n\u003cp\u003eThe tracking generator is built in on every UTS3036T+ \/ UTS3084T+ model. Field-installable options: \u003ca href=\"\/products\/uts3000b-ama\"\u003eUTS3000-AMA Analog Demodulation\u003c\/a\u003e, \u003ca href=\"\/products\/uts3000b-amk\"\u003eUTS3000-AMK Advanced Measurement Kit\u003c\/a\u003e, \u003ca href=\"\/products\/uts3000b-emi\"\u003eUTS3000-EMI EMI Pre-Compliance\u003c\/a\u003e. The tracking generator is standard — it is not an added option on the T+ line.\u003c\/p\u003e\n\u003c\/div\u003e\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat does the UTS3036T+\/UTS3084T+ add over the lower-frequency models in this series?\u003c\/h3\u003e\n\u003cp\u003eFrequency reach, sweep depth and trace count. The UTS3036T+ and UTS3084T+ reach 3.6 GHz and 8.4 GHz with a 40,001-point sweep and six traces; the UTS3015T+\/UTS3032T+ models reach 1.5\/3.2 GHz with a 10,001-point sweep and four traces, and their analog-demod option is AM\/FM only (no PM). The Choosing Your Model table above shows the full series comparison.\u003c\/p\u003e\n\u003ch3\u003eWhat is the difference between the UTS3036T+ and the UTS3084T+?\u003c\/h3\u003e\n\u003cp\u003eFrequency ceiling and tracking-generator range. The UTS3036T+ covers to 3.6 GHz with a TG to 3.6 GHz; the UTS3084T+ covers to 8.4 GHz with a TG to 6 GHz and slightly better close-in phase noise. Both share the 40,001-point sweep engine, six traces and the full option set. See \u003cem\u003eChoosing Your Model\u003c\/em\u003e above.\u003c\/p\u003e\n\u003ch3\u003eIs the tracking generator standard?\u003c\/h3\u003e\n\u003cp\u003eYes. The tracking generator is built in and standard on every UTS3000T+ model. Analog demodulation, the advanced measurement kit and EMI pre-compliance are field-installable options.\u003c\/p\u003e\n\u003ch3\u003eCan it screen for EMI before a formal compliance test?\u003c\/h3\u003e\n\u003cp\u003eWith the optional UTS3000-EMI kit it provides CISPR-bandwidth RBWs, quasi-peak and EMI-average detectors and editable limit lines (FCC, EN, MIL-STD-461, DO-160, VCCI, custom) for near-field-probe screening ahead of an accredited run.\u003c\/p\u003e\n\n\u003c\/div\u003e","brand":"UNI-T","offers":[{"title":"Default Title","offer_id":51324556443932,"sku":"181200100036X","price":2899.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UTS3084T__F-S.png?v=1740604762","url":"https:\/\/uni-trendus.com\/products\/uts3036tplus","provider":"Uni-Trend US","version":"1.0","type":"link"}