{"product_id":"uts3036a","title":"UTS3036A 3.6 GHz Performance-Series Signal Analyzer","description":"\u003cdiv class=\"product-container\"\u003e\n\u003ch1\u003eUNI-T UTS3036A Signal Analyzer | 3.6 GHz Real-Time Spectrum + VNA + Tracking Generator\u003c\/h1\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThe UNI-T UTS3036A is a 3.6 GHz \u003cstrong\u003ereal-time signal analyzer\u003c\/strong\u003e with built-in vector network analyzer (VNA) and tracking generator — a different class of instrument from a swept-spectrum analyzer, sized for advanced RF design, EMC engineering, and modulated-carrier characterization. Frequency coverage runs 9 kHz to 3.6 GHz with 1 Hz resolution; minimum resolution bandwidth is 1 Hz; maximum resolution bandwidth is 10 MHz; typical displayed average noise level reaches -165 dBm\/Hz (200 MHz to 1.5 GHz, preamp on); and phase noise runs -100 dBc\/Hz typical at 10 kHz offset. The 10.1-inch 1280 × 800 capacitive multi-touch display surfaces real-time, swept, VNA, and (with optional licenses) demodulation modes without burying them behind soft-key paths.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe UTS3000A is built around three architectural pillars that swept-spectrum analyzers do not have: real-time spectrum analysis, vector network analysis with S11\/S21, and digital signal demodulation.\u003c\/strong\u003e Real-time spectrum is standard at 10 MHz bandwidth (extendable to 40 MHz with the optional UTS3000A-B40 license), with 100% probability-of-intercept guaranteed at 6.68 µs minimum signal duration — transient emissions, frequency-hopping radios, and intermittent EMI events that fall between sweeps on conventional analyzers are captured deterministically. The VNA covers 100 kHz to 3.6 GHz with 80 dB S21 dynamic range and \u0026gt;40 dB S11 directivity after calibration — the reflection bridge is internal, no external bridge accessory is required. Digital demodulation (optional UTS3000A-VSA) covers ASK, FSK, PSK, QAM, MSK, and DPSK with EVM measurement. The UTS3036A is the entry point into the Performance Series for engineering teams whose measurement workload has outgrown swept-spectrum capability.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cdiv class=\"product-key-features\"\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Coverage:\u003c\/strong\u003e 9 kHz to 3.6 GHz signal analysis\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReal-Time Spectrum (Standard):\u003c\/strong\u003e 10 MHz default; 40 MHz optional with UTS3000A-B40\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt-In VNA (Standard):\u003c\/strong\u003e S11 + S21, Smith chart, polar coordinates (100 kHz to 3.6 GHz)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTracking Generator (Standard):\u003c\/strong\u003e 100 kHz to 3.6 GHz, output -40 to 0 dBm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSensitivity:\u003c\/strong\u003e DANL -165 dBm\/Hz typical (200 MHz to 1.5 GHz, preamp on)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhase Noise:\u003c\/strong\u003e -100 dBc\/Hz typical at 10 kHz offset\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eResolution Bandwidth:\u003c\/strong\u003e 1 Hz to 10 MHz in 1-3-10 steps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSweep Resolution:\u003c\/strong\u003e 40,001 sweep points; minimum RBW 1 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-Trace Display:\u003c\/strong\u003e 12 real-time \/ 6 swept simultaneous traces\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Mask Trigger:\u003c\/strong\u003e FMT for transient and episodic signal capture\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisplay:\u003c\/strong\u003e 10.1-inch 1280 × 800 capacitive multi-touch HD\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnectivity:\u003c\/strong\u003e USB-Host, USB-Device, LAN (VXI-11), HDMI, 10 MHz reference in\/out\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProgrammability:\u003c\/strong\u003e SCPI over USB-TMC, Socket, VXI-11; WebServer; LabVIEW; NI-VISA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptional Packages:\u003c\/strong\u003e B40, AMK, EMI, AMA, VSA (digital demod), I\/Q Analyzer\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eUNI-T UTS3036A Detailed Features\u003c\/h2\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eFrequency Coverage (9 kHz to 3.6 GHz)\u003c\/h3\u003e\n\u003cp\u003eThe UTS3036A covers 9 kHz to 3.6 GHz with 1 Hz frequency resolution — the entry into the Performance Series’ real-time + VNA architecture. The range covers all sub-3.6 GHz cellular bands, the lower portion of 5G NR n77 (3.3–4.2 GHz) and n78 (3.3–3.8 GHz), Wi-Fi 6 in the 5 GHz lower allocation, the 2.4 GHz Wi-Fi\/Bluetooth ISM band, and the entire CISPR-32 radiated-emissions range (30 MHz to 1 GHz) with substantial headroom for harmonic content. Tracking generator and VNA modes both cover the full 100 kHz to 3.6 GHz range, supporting stimulus-response measurement across the analyzer’s entire frequency reach.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-uts3036a-3-6ghz-performance-series-signal-analyzer-freq-coverage\" class=\"product-thumb-link\"\u003e\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/v1726768127\/UTS3036A_1.jpg\" alt=\"UTS3036A 3.6 GHz signal analyzer\" class=\"product-image-thumb\"\u003e\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eUTS3036A signal analyzer with 9 kHz to 3.6 GHz spectrum coverage.\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003ca id=\"lb-uts3036a-3-6ghz-performance-series-signal-analyzer-freq-coverage\" href=\"#_\" class=\"product-lightbox\"\u003e\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/v1726768127\/UTS3036A_1.jpg\" alt=\"UTS3036A 3.6 GHz signal analyzer\"\u003e\u003cspan class=\"product-lightbox-caption\"\u003eUTS3036A signal analyzer with 9 kHz to 3.6 GHz spectrum coverage.\u003c\/span\u003e\u003c\/a\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-uts3036a-3-6ghz-performance-series-signal-analyzer-realtime-spectrum\" class=\"product-thumb-link\"\u003e\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/v1728331816\/UTS3000A_RTFSA.gif\" alt=\"UTS3036A real-time spectrum analysis with density spectrogram\" class=\"product-image-thumb\"\u003e\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eReal-time spectrum analysis with density spectrogram — standard, not swept.\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003ca id=\"lb-uts3036a-3-6ghz-performance-series-signal-analyzer-realtime-spectrum\" href=\"#_\" class=\"product-lightbox\"\u003e\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/v1728331816\/UTS3000A_RTFSA.gif\" alt=\"UTS3036A real-time spectrum analysis with density spectrogram\"\u003e\u003cspan class=\"product-lightbox-caption\"\u003eReal-time spectrum analysis with density spectrogram — standard, not swept.\u003c\/span\u003e\u003c\/a\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003ch3\u003eReal-Time Spectrum Analysis (Standard)\u003c\/h3\u003e\n\u003cp\u003eReal-time spectrum analysis is included as standard, not as an option or upsell. Default real-time bandwidth is 10 MHz; the optional UTS3000A-B40 license extends this to 40 MHz. The signature display mode is the density spectrogram — consecutive FFT frames overlaid with probability-density coloration, surfacing low-amplitude signals hidden under stronger ones and revealing time-frequency structure that swept measurement collapses into a single trace. Maximum sampling rate 51.2 MSa\/s; FFT rate 146,253 frames\/second nominal; 12 simultaneous traces (vs. 6 swept). Eight display modes cover Normal, Density, Spectrogram, PvT, PvT Spectrum, PvT Spectrogram, Powergram, Powergram Spectrogram. The 100% probability-of-intercept minimum signal duration is 6.68 µs at 40 MHz span (default Kaiser window) — a guaranteed-capture spec swept analyzers fundamentally cannot match.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eBuilt-In VNA: S11 + S21 (100 kHz to 3.6 GHz, Standard)\u003c\/h3\u003e\n\u003cp\u003eVector network analysis is included as standard, not as a separate instrument or option. S11 reflection and S21 transmission cover 100 kHz to 3.6 GHz with 80 dB S21 dynamic range and \u0026gt;40 dB S11 directivity after calibration. Display formats include logarithmic and linear amplitude, phase, group delay, SWR, real and imaginary parts, Smith chart (multiple variants), and polar coordinate. Mechanical calibration: Open, Short, Load, Through, Custom — supported by the UT-3009F\/M cal kit (DC to 9 GHz). 101 to 10,001 measurement points (default 201); 10 markers; IF bandwidth 100 Hz to 1 MHz. The reflection bridge is internal — no external bridge accessory required.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-uts3036a-3-6ghz-performance-series-signal-analyzer-vna\" class=\"product-thumb-link\"\u003e\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/v1728331791\/UTS3000A-VNA_SS.png\" alt=\"UTS3036A built-in VNA with Smith chart visualization\" class=\"product-image-thumb\"\u003e\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eBuilt-in VNA: S11 reflection and S21 transmission, 100 kHz–3.6 GHz, with Smith chart and polar coordinates.\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003ca id=\"lb-uts3036a-3-6ghz-performance-series-signal-analyzer-vna\" href=\"#_\" class=\"product-lightbox\"\u003e\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/v1728331791\/UTS3000A-VNA_SS.png\" alt=\"UTS3036A built-in VNA with Smith chart visualization\"\u003e\u003cspan class=\"product-lightbox-caption\"\u003eBuilt-in VNA: S11 reflection and S21 transmission, 100 kHz–3.6 GHz, with Smith chart and polar coordinates.\u003c\/span\u003e\u003c\/a\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-uts3036a-3-6ghz-performance-series-signal-analyzer-ftt-trigger\" class=\"product-thumb-link\"\u003e\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/v1728331793\/UTS3000A-FTT.png\" alt=\"UTS3036A frequency template trigger for transient capture\" class=\"product-image-thumb\"\u003e\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eFrequency Mask Template trigger (FMT) for capturing episodic and transient signals.\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003ca id=\"lb-uts3036a-3-6ghz-performance-series-signal-analyzer-ftt-trigger\" href=\"#_\" class=\"product-lightbox\"\u003e\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/v1728331793\/UTS3000A-FTT.png\" alt=\"UTS3036A frequency template trigger for transient capture\"\u003e\u003cspan class=\"product-lightbox-caption\"\u003eFrequency Mask Template trigger (FMT) for capturing episodic and transient signals.\u003c\/span\u003e\u003c\/a\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003ch3\u003eFrequency Mask Template Trigger (FMT)\u003c\/h3\u003e\n\u003cp\u003eThe Frequency Mask Template (FMT) trigger captures episodic and transient signals that exceed a user-defined spectral mask. Mask types: Upper, Lower, Both. Trigger criteria: Enter, Leave, Inside, Outside, Enter-Leave, Leave-Enter — supporting both threshold-crossing and dwell-time qualification. Combined with the real-time spectrum mode and 6.68 µs 100% POI minimum signal duration, FMT captures intermittent emissions, transient interference, and frequency-hopping transitions that fall between sweeps on a swept-spectrum analyzer. For radar pulse analysis, EMI event capture, and protocol-state spectral characterization, FMT is the trigger architecture that turns rare events into reliable measurements.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eDigital Signal Demodulation (UTS3000A-VSA Option)\u003c\/h3\u003e\n\u003cp\u003eThe optional UTS3000A-VSA Vector Signal Analyzer license adds digital demodulation across the modulation-scheme set used in modern radio: ASK (2\/4\/8\/16), FSK (2\/4\/8\/16), PSK (BPSK, QPSK, OQPSK, 8PSK), DPSK, QAM (16\/32\/64\/128\/256), and MSK. Symbol error statistics include EVM (rms and peak), magnitude error, phase error, IQ offset, carrier offset, SNR, quadrature error, and gain imbalance. Display formats: constellation diagrams, IQ time-domain plots, eye diagrams (I and Q), and error-vector time\/frequency-domain views. Measurement filters: Raised Cosine, RRC, Gaussian, EDGE, CDMA, rectangular; symbol length 10 to 4,096; over-sampling rates 4 through 20. For modulated-carrier characterization where the question is signal quality on a bench-grade radio design, the VSA option replaces a separate vector signal analyzer instrument.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-uts3036a-3-6ghz-performance-series-signal-analyzer-digital-demod\" class=\"product-thumb-link\"\u003e\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/v1728331808\/UTS3000A-Demod.png\" alt=\"UTS3036A digital signal demodulation with constellation diagram\" class=\"product-image-thumb\"\u003e\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eDigital demodulation analysis (UTS3000A-VSA option): ASK, FSK, PSK, QAM, MSK, DPSK with EVM measurement.\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003ca id=\"lb-uts3036a-3-6ghz-performance-series-signal-analyzer-digital-demod\" href=\"#_\" class=\"product-lightbox\"\u003e\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/v1728331808\/UTS3000A-Demod.png\" alt=\"UTS3036A digital signal demodulation with constellation diagram\"\u003e\u003cspan class=\"product-lightbox-caption\"\u003eDigital demodulation analysis (UTS3000A-VSA option): ASK, FSK, PSK, QAM, MSK, DPSK with EVM measurement.\u003c\/span\u003e\u003c\/a\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-uts3036a-3-6ghz-performance-series-signal-analyzer-sensitivity-danl\" class=\"product-thumb-link\"\u003e\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/v1728331803\/UTS3000A-Sensitivity.png\" alt=\"UTS3036A DANL sensitivity for weak-signal detection\" class=\"product-image-thumb\"\u003e\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eTypical DANL of -165 dBm\/Hz (200 MHz to 1.5 GHz, preamp on) for weak-signal detection.\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003ca id=\"lb-uts3036a-3-6ghz-performance-series-signal-analyzer-sensitivity-danl\" href=\"#_\" class=\"product-lightbox\"\u003e\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/v1728331803\/UTS3000A-Sensitivity.png\" alt=\"UTS3036A DANL sensitivity for weak-signal detection\"\u003e\u003cspan class=\"product-lightbox-caption\"\u003eTypical DANL of -165 dBm\/Hz (200 MHz to 1.5 GHz, preamp on) for weak-signal detection.\u003c\/span\u003e\u003c\/a\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003ch3\u003eSensitivity for Weak-Signal Detection (DANL -165 dBm\/Hz typ.)\u003c\/h3\u003e\n\u003cp\u003eDisplayed average noise level (DANL) reaches -165 dBm\/Hz typical with the preamplifier engaged in the 200 MHz to 1.5 GHz band, and -166 dBm\/Hz typical at 10 MHz to 200 MHz — the deepest sensitivity in the Performance Series. Across band, typical preamp-on DANL tracks from -153 dBm\/Hz at 1–10 MHz to -158 dBm\/Hz at the 7.5–8.4 GHz upper edge. With 0 dB attenuation, 1 Hz RBW, sample or average detection, and average \u0026gt;50, the noise floor supports detection of the low-amplitude phenomena that distinguish a quiet design from a marginal one — weak spurious emissions on power amplifiers, low-microwave harmonic content from wide-bandgap power stages, and modulated-carrier signal-integrity work.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eEMI Pre-Compliance Testing (UTS3000A-EMI Option)\u003c\/h3\u003e\n\u003cp\u003eThe optional UTS3000A-EMI package adds CISPR-specification resolution bandwidths (200 Hz, 9 kHz, 120 kHz, 1 MHz at −6 dB), quasi-peak and EMI-average detectors, and built-in limit masks for the major regulatory standards (AS-NZS, BellCore, DEF-STAN, DO-160, EN, FCC, GB9254, MIL-461, VCCI; plus custom limits). Scan workflow supports Scan-Search-Measure with signal-table reporting. Combined with the optional UTS-EMI01 near-field probe kit (four probes covering 30 MHz to 3 GHz), the analyzer supports radiated-emission pre-compliance measurement on the engineering bench — useful for catching mitigation needs before the compliance lab visit.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-uts3036a-3-6ghz-performance-series-signal-analyzer-emi-precompliance\" class=\"product-thumb-link\"\u003e\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/v1728331807\/UTS3000A-EMI_Detection.png\" alt=\"UTS3036A EMI pre-compliance testing capability\" class=\"product-image-thumb\"\u003e\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eEMI pre-compliance with CISPR-spec RBWs and quasi-peak \/ EMI-average detectors (UTS3000A-EMI option).\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003ca id=\"lb-uts3036a-3-6ghz-performance-series-signal-analyzer-emi-precompliance\" href=\"#_\" class=\"product-lightbox\"\u003e\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/v1728331807\/UTS3000A-EMI_Detection.png\" alt=\"UTS3036A EMI pre-compliance testing capability\"\u003e\u003cspan class=\"product-lightbox-caption\"\u003eEMI pre-compliance with CISPR-spec RBWs and quasi-peak \/ EMI-average detectors (UTS3000A-EMI option).\u003c\/span\u003e\u003c\/a\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-uts3036a-3-6ghz-performance-series-signal-analyzer-interfaces\" class=\"product-thumb-link\"\u003e\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/v1728331799\/UTS3000A_Interfaces.jpg\" alt=\"UTS3036A front and rear panel interfaces\" class=\"product-image-thumb\"\u003e\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eFront-panel: RF input (N-female), TG output (N-female). Rear: HDMI, USB-A, USB-B, LAN, 10 MHz reference, external trigger.\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003ca id=\"lb-uts3036a-3-6ghz-performance-series-signal-analyzer-interfaces\" href=\"#_\" class=\"product-lightbox\"\u003e\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/v1728331799\/UTS3000A_Interfaces.jpg\" alt=\"UTS3036A front and rear panel interfaces\"\u003e\u003cspan class=\"product-lightbox-caption\"\u003eFront-panel: RF input (N-female), TG output (N-female). Rear: HDMI, USB-A, USB-B, LAN, 10 MHz reference, external trigger.\u003c\/span\u003e\u003c\/a\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003ch3\u003eComprehensive Interface Set\u003c\/h3\u003e\n\u003cp\u003eFront-panel interfaces include the RF input (50 Ω, N-type female) and the tracking-generator source output (50 Ω, N-type female). The 10.1-inch capacitive multi-touch display is also front-panel. Rear-panel interfaces support automated test integration: HDMI 1.4 video output for an external monitor; USB-Host (USB-A) for thumb-drive screenshot\/data export and firmware update; USB-Device (USB-B) for direct PC connection over SCPI; LAN (VXI-11, 10\/100\/1000 Base, RJ-45) for network-based remote control; 10 MHz reference input\/output (BNC, 50 Ω) for synchronization with other instruments; external trigger input (TTL, BNC); and audio output (3.5 mm). SCPI is supported over both USB and LAN.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eSCPI, WebServer, and Multi-Platform Remote Control\u003c\/h3\u003e\n\u003cp\u003eRemote control supports SCPI over USB-TMC, Socket, and VXI-11; web-browser access through the built-in WebServer (PCs and mobile phones); LabVIEW and NI-VISA driver compatibility; and the UNI-T Device Manager software (V2.5.0 and higher) for instrument management over LAN or USB flash drive. The WebServer enables remote viewing, trace-data export, and SCPI control without installing a driver — useful for distributed test setups and for remote bench monitoring during long-duration EMC sweeps. The 10.1-inch capacitive multi-touch HD display (1280 × 800 native, RGB vertical pixel layout) provides the local user interface with drag-to-pan, pinch-to-zoom, and tap-to-place-marker gesture support.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-uts3036a-3-6ghz-performance-series-signal-analyzer-remote-control\" class=\"product-thumb-link\"\u003e\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/v1728331795\/UTS3000A_scpi.jpg\" alt=\"UTS3036A SCPI remote control and WebServer browser interface\" class=\"product-image-thumb\"\u003e\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eSCPI over USB-TMC, Socket, VXI-11; WebServer browser-based remote control; LabVIEW\/NI-VISA support.\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003ca id=\"lb-uts3036a-3-6ghz-performance-series-signal-analyzer-remote-control\" href=\"#_\" class=\"product-lightbox\"\u003e\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/v1728331795\/UTS3000A_scpi.jpg\" alt=\"UTS3036A SCPI remote control and WebServer browser interface\"\u003e\u003cspan class=\"product-lightbox-caption\"\u003eSCPI over USB-TMC, Socket, VXI-11; WebServer browser-based remote control; LabVIEW\/NI-VISA support.\u003c\/span\u003e\u003c\/a\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eApplications\u003c\/h2\u003e\n\u003cdiv class=\"product-row\"\u003e\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eAdvanced RF Design and 5G NR Characterization\u003c\/h3\u003e\n\u003cp\u003eFor RF design and characterization spanning sub-3.6 GHz cellular, the lower portion of 5G NR n77 (3.3–4.2 GHz) and n78 (3.3–3.8 GHz), Wi-Fi 6 in the 5 GHz lower allocation, and the entire CISPR-32 radiated-emissions range (30 MHz to 1 GHz) with substantial headroom, the UTS3036A delivers real-time spectrum, VNA, and tracking-generator capability on one bench at the entry point of the Performance Series.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/div\u003e\n\u003cdiv class=\"product-row\"\u003e\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eEMC Pre-Compliance and Power-Electronics EMI\u003c\/h3\u003e\n\u003cp\u003eFor switching-converter EMI characterization on GaN and SiC power stages where broadband emissions span 150 kHz to 1 GHz, the real-time spectrum mode catches transient switching events that swept analyzers miss, and the built-in VNA characterizes EMI filter networks, ferrite chokes, and snubber circuits with S11\/S21 sweeps and Smith-chart visualization.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/div\u003e\n\u003cdiv class=\"product-row\"\u003e\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eVNA Component Characterization and Network Analysis\u003c\/h3\u003e\n\u003cp\u003eFor component characterization — filters, antennas, amplifiers, transmission lines — the built-in VNA with S11 reflection and S21 transmission measurement eliminates the separate scalar-network-analyzer and reflection-bridge instruments previously needed at the bench. The 100 kHz to 3.6 GHz VNA range, with the UT-3009F\/M calibration kit (DC to 9 GHz), supports full vector characterization across the analyzer’s spectrum reach.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eAccessories \u0026amp; In the Box\u003c\/h2\u003e\n\u003ch3\u003eStandard Accessories\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePower cord × 1\u003c\/li\u003e\n\u003cli\u003eUT-D14 USB cable × 1\u003c\/li\u003e\n\u003cli\u003eUTS3036A signal analyzer (instrument)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eRecommended Optional Accessories\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUT-3009F\/M VNA Calibration Kit\u003c\/strong\u003e — recommended pairing for VNA mode (DC to 9 GHz; supports Open\/Short\/Load\/Through mechanical calibration).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUTS3000A-B40\u003c\/strong\u003e — extends real-time bandwidth from 10 MHz to 40 MHz (license-key unlock).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUTS3000A-AMK\u003c\/strong\u003e Advanced Measurement Kit; \u003cstrong\u003eUTS3000A-EMI\u003c\/strong\u003e EMI Pre-Compliance; \u003cstrong\u003eUTS3000A-AMA\u003c\/strong\u003e Analog Demodulation; \u003cstrong\u003eUTS3000A-VSA\u003c\/strong\u003e Vector Signal Analyzer (digital demod); \u003cstrong\u003eUTS3000A-I\/Q\u003c\/strong\u003e I\/Q Analyzer — license-key software unlocks (see FAQ for capability summary).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUTS-EMI01 Near-Field Probe Kit\u003c\/strong\u003e — four probes covering 30 MHz to 3 GHz for radiated-emission scouting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUT-CK01 Cable and Adapter Accessory Kit\u003c\/strong\u003e — SMA-N adapters and cables for general RF bench work.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUTS-T01 \/ UTS-T02 Antenna Pairs\u003c\/strong\u003e — Wi-Fi\/Bluetooth (2400–2500 MHz) and cellular-band (824–960 \/ 1710–1990 MHz) antenna pairs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eWhat is the tracking generator and VNA frequency range?\u003c\/p\u003e\n\u003cp\u003eOn the UTS3036A, both the tracking generator and the VNA cover \u003cstrong\u003e100 kHz to 3.6 GHz\u003c\/strong\u003e — the full spectrum range of the analyzer. TG output adjusts -40 to 0 dBm in 0.5 dB steps with ±3 dB flatness referenced to 50 MHz. VNA mode supports S11\/S21 with 80 dB S21 dynamic range and \u0026gt;40 dB S11 directivity after calibration. The reflection bridge is internal — no external bridge required. The recommended cal kit is the UT-3009F\/M (DC to 9 GHz).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eWhich features are standard and which require optional packages?\u003c\/p\u003e\n\u003cp\u003eThe UTS3000A includes \u003cstrong\u003eSpectrum Analyzer\u003c\/strong\u003e, \u003cstrong\u003eReal-time Spectrum Analyzer\u003c\/strong\u003e (10 MHz default real-time bandwidth), \u003cstrong\u003eVector Network Analyzer\u003c\/strong\u003e (S11 + S21), and \u003cstrong\u003eTracking Generator\u003c\/strong\u003e as \u003cstrong\u003estandard\u003c\/strong\u003e, at no extra cost. Six \u003cstrong\u003eoptional\u003c\/strong\u003e license-key software unlocks extend the capability set: \u003cstrong\u003eUTS3000A-B40\u003c\/strong\u003e (extends real-time bandwidth to 40 MHz), \u003cstrong\u003eUTS3000A-AMK\u003c\/strong\u003e (Advanced Measurement Kit: channel power, ACP, OBW, CNR, TOI, harmonics), \u003cstrong\u003eUTS3000A-EMI\u003c\/strong\u003e (EMI pre-compliance with CISPR RBWs and quasi-peak\/EMI-average detectors), \u003cstrong\u003eUTS3000A-AMA\u003c\/strong\u003e (analog AM\/FM\/PM demod), \u003cstrong\u003eUTS3000A-VSA\u003c\/strong\u003e (digital demod: ASK\/FSK\/PSK\/QAM\/MSK\/DPSK with EVM), and \u003cstrong\u003eUTS3000A-I\/Q\u003c\/strong\u003e (50 Hz to 8.4 GHz I\/Q analysis with 14-bit ADC, 51.2 MSa\/s).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eDoes this analyzer support EMI pre-compliance testing?\u003c\/p\u003e\n\u003cp\u003eYes, with the optional \u003cstrong\u003eUTS3000A-EMI\u003c\/strong\u003e package. EMI mode adds CISPR-specification resolution bandwidths (200 Hz, 9 kHz, 120 kHz, 1 MHz at −6 dB), quasi-peak and EMI-average detectors, a peak Scan-Search-Measure sweep workflow, and built-in limit masks for the major regulatory standards (AS-NZS, BellCore, DEF-STAN, DO-160, EN, FCC, GB9254, MIL-461, VCCI; plus custom limits). Combined with the optional \u003cstrong\u003eUTS-EMI01 near-field probe kit\u003c\/strong\u003e (four probes covering 30 MHz to 3 GHz), the analyzer supports radiated-emission pre-compliance measurement on the engineering bench.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eHow does the UTS3000A differ from the UTS3000T+ family?\u003c\/p\u003e\n\u003cp\u003eThe UTS3000A and UTS3000T+ are different classes of instrument for different audiences. The \u003cstrong\u003eUTS3000T+ is a swept-spectrum analyzer\u003c\/strong\u003e with optional analysis kits — sized for value-tier RF design, education, and pre-compliance EMI work. The \u003cstrong\u003eUTS3000A is a Performance-Series real-time signal analyzer\u003c\/strong\u003e with built-in VNA and digital demodulation — sized for advanced RF design, professional EMC, and modulated-carrier characterization where capturing transient and modulated signals is the measurement workload.\u003cbr\u003e\u003cbr\u003eConcrete differences: \u003cstrong\u003ereal-time spectrum\u003c\/strong\u003e is standard on the A (10 MHz, optionally 40 MHz with B40); the T+ has no real-time mode. \u003cstrong\u003eVNA with S11\/S21, Smith chart, polar coordinate\u003c\/strong\u003e is standard on the A; the T+ supports basic reflection only with an external bridge accessory. \u003cstrong\u003eRBW range\u003c\/strong\u003e extends to 10 MHz on the A vs 3 MHz on the T+ flagship pair. \u003cstrong\u003ePhase noise\u003c\/strong\u003e is -100 dBc\/Hz typ at 10 kHz on the A vs \u0026lt;-98 dBc\/Hz on the T+. \u003cstrong\u003eReal-time traces\u003c\/strong\u003e support 12 simultaneous traces on the A vs 6 swept on the T+ flagship pair. The A also adds the Frequency Mask Template trigger (FMT) and the optional UTS3000A-VSA digital demodulation package — capabilities not available on the T+. Pricing reflects the architectural difference.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003c\/div\u003e","brand":"UNI-T","offers":[{"title":"Default Title","offer_id":49970597232924,"sku":"181200100042X","price":5999.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UTS3036A_1_sq.jpg?v=1756500094","url":"https:\/\/uni-trendus.com\/products\/uts3036a","provider":"Uni-Trend US","version":"1.0","type":"link"}