{"product_id":"usg5022v-p","title":"USG5022V-P 22 GHz Vector RF Signal Generator with Mechanical Attenuator","description":"\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThe USG5022V-P is a 22 GHz vector signal generator covering 9 kHz to 22 GHz with 0.001 Hz frequency resolution and a level range of −135 dBm to +25 dBm. Single-sideband phase noise typically \u0026lt; −122 dBc\/Hz at 1 GHz \/ 20 kHz offset, amplitude accuracy ≤0.7 dB (Typ.), and frequency switching ≤40 ms make it suitable for both bench R\u0026amp;D and automated test workflows. The USG5022V-P supports full vector modulation with a 150 MHz real-time baseband bandwidth.\u003c\/p\u003e\n\u003cp\u003eAs a vector signal generator, the USG5022V-P adds a full real-time digital modulation engine to the analog signal-source foundation. With 150 MHz of baseband bandwidth, real-time QAM\/PSK\/FSK\/ASK generation, ARB waveform-file playback, multi-carrier and multi-tone modes, and AWGN noise injection for receiver testing, the USG5022V-P addresses protocol-aware wireless R\u0026amp;D and commercial production test for 5G NR, WLAN, LTE, Bluetooth, ZigBee, and Z-Wave devices. Typical QPSK EVM is 0.4% at a 1 GHz carrier; 5G NR ACPR is typically \u0026lt; −55 dBc at a 3.8 GHz carrier. With the 22 GHz CW carrier ceiling, the USG5022V-P reaches commercial 5G NR FR2 IF stages, Wi-Fi 7 6 GHz unlicensed band test, and commercial automotive ADAS radar IF-chain stimulus.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cdiv class=\"product-key-features\"\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e9 kHz to 22 GHz CW Frequency Range\u003c\/strong\u003e — \u0026gt;5 MHz to 6 GHz in I\/Q mode; 0.001 Hz resolution across the full band.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e−135 dBm to +25 dBm Level Range\u003c\/strong\u003e — 160 dB dynamic range with 0.01 dB resolution and ≤0.7 dB amplitude accuracy typical.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhase Noise \u0026lt; −122 dBc\/Hz at 1 GHz\u003c\/strong\u003e — single-sideband phase noise typical at 20 kHz offset for sensitive vector measurement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMechanical Step Attenuator Standard\u003c\/strong\u003e — 0 to 110 dB range with 10 dB steps; mechanical attenuator delivers maximum absolute output power across all bands.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVector Modulation Accuracy\u003c\/strong\u003e — QPSK EVM 0.4% at 1 GHz typical; 5G NR ACPR \u0026lt; −55 dBc at 3.8 GHz typical.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e150 MHz Real-Time Baseband Bandwidth\u003c\/strong\u003e — internal vector engine covers wideband modulation envelopes including Wi-Fi 6\/7 channel widths.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReal-Time Digital Modulation\u003c\/strong\u003e — QAM, PSK, FSK, ASK with custom filter shapes (RRC, Gaussian, user-defined) and filling settings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eARB Playback, Multi-Carrier, and Multi-Tone Modes\u003c\/strong\u003e — user-defined waveform replay with carrier-aggregated and multi-tone test signal generation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReal-Time AWGN Injection\u003c\/strong\u003e — precise SNR control for receiver sensitivity and dynamic-range characterization.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNative ZigBee and Z-Wave IoT Generation\u003c\/strong\u003e — protocol-aware signal generation for IoT module test and incoming inspection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMobile-Comm Protocol Simulation\u003c\/strong\u003e — 5G NR, WLAN, LTE, Bluetooth, IoT waveform support with UNI-T SignalStudio software (sold separately).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAM, FM, and ΦM Analog Modulation\u003c\/strong\u003e — internal, external, or internal + external sources alongside the digital engine.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOCXO High-Stability Clock Source Standard\u003c\/strong\u003e — ≤±0.2 ppm\/year aging, ≤±10 ppb temperature effects.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt-in 50 MHz Function\/Arbitrary Waveform Generator\u003c\/strong\u003e — standard waveforms, sweep, and modulation from a separate LF output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNMD 2.92 mm RF Output Connector\u003c\/strong\u003e — 50 Ω 40 GHz-capable connector for full-band cable compatibility.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e5-Inch Touch Screen with Signal-Flow Interface\u003c\/strong\u003e — full touch control with intuitive signal-flow-diagram interaction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLAN, USB Host, USB Device Standard\u003c\/strong\u003e — GPIB optional; full SCPI automation via LabVIEW, Python, MATLAB, Excel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeb Control + Device Manager\u003c\/strong\u003e — browser-based remote access plus free PC management software (V2.5.0+).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptional Pulse Modulation\u003c\/strong\u003e — 80 dB on-off ratio with customizable pulse trains.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptional Narrow-Pulse Generator\u003c\/strong\u003e — 40 ns minimum width with 10 ns resolution for radar component test.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptional USB Power Sensor Support (USG5000-PK)\u003c\/strong\u003e — license-activated readback and flatness correction with a user-supplied USB power sensor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCE | cETLus | RoHS Compliant\u003c\/strong\u003e — meets common North American and European safety and environmental standards.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eDetailed Features\u003c\/h2\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eHigh Spectral Purity for Sensitive Receiver and Component Test\u003c\/h3\u003e\n\u003cp\u003eSingle-sideband phase noise typically below −122 dBc\/Hz at 1 GHz with a 20 kHz offset is the headline spectral-purity figure that determines whether a generator can stimulate the device under test without contaminating the measurement. Low close-in phase noise matters for adjacent-channel rejection testing on receivers, image-rejection on mixers, and narrowband filter characterization where the stimulus must be cleaner than the device's own passband behavior. Phase noise degrades with the band multiplier (N) architecture: typically −102 dBc\/Hz at 10 GHz and −98 dBc\/Hz at 22 GHz.\u003c\/p\u003e\n\u003cp\u003eThe clock-source architecture supports ≤±0.2 ppm\/year aging rate and ≤±10 ppb temperature effects — stable enough for calibration-cycle use without external 10 MHz lock. Rear-panel 10 MHz reference input and output are available for multi-instrument synchronization.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-usg5022v-p-vector-rf-generator-phase-noise\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/USG5000V-phase_noise.jpg\" alt=\"Phase noise measurement plot for USG5000-series RF generator\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eSingle-sideband phase noise typical \u0026lt; -122 dBc\/Hz at 1 GHz\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003ca id=\"lb-usg5022v-p-vector-rf-generator-phase-noise\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/USG5000V-phase_noise.jpg\" alt=\"Phase noise measurement plot for USG5000-series RF generator\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eSingle-sideband phase noise typical \u0026lt; -122 dBc\/Hz at 1 GHz\u003c\/span\u003e\n\u003c\/a\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-usg5022v-p-vector-rf-generator-vector-modulation\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/USG5000V-vector_modulation.gif\" alt=\"USG5000V vector modulation display\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eQPSK EVM 0.4% at 1 GHz, 5G NR ACPR \u0026lt;-55 dBc at 3.8 GHz (Typ.)\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003ca id=\"lb-usg5022v-p-vector-rf-generator-vector-modulation\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/USG5000V-vector_modulation.gif\" alt=\"USG5000V vector modulation display\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eQPSK EVM 0.4% at 1 GHz, 5G NR ACPR \u0026lt;-55 dBc at 3.8 GHz (Typ.)\u003c\/span\u003e\n\u003c\/a\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003ch3\u003eReal-Time Vector Modulation with 150 MHz Baseband Bandwidth\u003c\/h3\u003e\n\u003cp\u003eThe internal vector engine provides 150 MHz of real-time baseband bandwidth and generates real-time QAM, PSK, FSK, and ASK modulation with configurable filter shapes (RRC, Gaussian, custom) and user-defined custom modulation types with adjustable filling settings. With QPSK at a 1 GHz carrier, measured EVM is 0.4% typical — calibration-grade. For 5G NR at 3.8 GHz, ACPR is \u0026lt; −55 dBc typical, so the instrument's own spectral regrowth doesn't dominate measurements on 5G receiver and transmitter validation work.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-usg5022v-p-vector-rf-generator-level-range\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/USG5000V_2.png\" alt=\"USG5000V front panel showing level control\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003e160 dB output range with three ALC modes\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003ca id=\"lb-usg5022v-p-vector-rf-generator-level-range\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/USG5000V_2.png\" alt=\"USG5000V front panel showing level control\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003e160 dB output range with three ALC modes\u003c\/span\u003e\n\u003c\/a\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003ch3\u003eWide Output Range — +25 dBm Maximum, −135 dBm Minimum\u003c\/h3\u003e\n\u003cp\u003eOutput settable range is −135 dBm to +25 dBm with 0.01 dB resolution. Maximum output power varies by frequency band and attenuator type; the mechanical attenuator on this variant covers 0 to 110 dB in 10 dB steps.\u003c\/p\u003e\n\u003cp\u003eThree ALC (Automatic Level Control) modes are available: ALC Auto selects the optimum mode for the current operating state; ALC On runs closed-loop level control for CW, FM, and ΦM operation; ALC S\u0026amp;H (Off) freezes the closed-loop value on frequency or amplitude transitions, useful for AM and pulse modulation work where ALC interaction with the modulation envelope is undesirable.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-usg5022v-p-vector-rf-generator-arb-multicarrier\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/USG5000V-scanning_methods.gif\" alt=\"USG5000V ARB and multi-carrier mode displays\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eARB playback with multi-carrier and multi-tone modes\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003ca id=\"lb-usg5022v-p-vector-rf-generator-arb-multicarrier\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/USG5000V-scanning_methods.gif\" alt=\"USG5000V ARB and multi-carrier mode displays\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eARB playback with multi-carrier and multi-tone modes\u003c\/span\u003e\n\u003c\/a\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003ch3\u003eARB Playback, Multi-Carrier, and Multi-Tone Modes\u003c\/h3\u003e\n\u003cp\u003eARB playback mode plays back user-defined arbitrary waveform data at variable sampling rates with baseband preview in both time and frequency domains. ARB multi-carrier mode splits wideband signals into multiple narrowband subcarriers, each independently modulated — simplifying carrier-aggregated LTE\/5G NR signals and multi-channel interference environments without external combiners. Multi-tone mode generates multiple frequency components simultaneously for intermodulation distortion testing and multi-channel receiver characterization.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eReal-Time AWGN Injection for Receiver Sensitivity Testing\u003c\/h3\u003e\n\u003cp\u003eThe instrument provides pure-noise output and real-time additive white Gaussian noise injection with precise signal-to-noise power control — no separate noise measurement step required before each test. For receiver sensitivity verification, blocking and selectivity testing, and dynamic-range characterization, AWGN injection is the workhorse stimulus. Controlling SNR digitally inside the same instrument that generates the modulated signal removes a measurement-uncertainty drift source on long-running production sequences.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-usg5022v-p-vector-rf-generator-awgn\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/USG5000V-AWGN_white_guassian_noise.gif\" alt=\"USG5000V AWGN spectrum display\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eReal-time AWGN injection with precise SNR control\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003ca id=\"lb-usg5022v-p-vector-rf-generator-awgn\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/USG5000V-AWGN_white_guassian_noise.gif\" alt=\"USG5000V AWGN spectrum display\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eReal-time AWGN injection with precise SNR control\u003c\/span\u003e\n\u003c\/a\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-usg5022v-p-vector-rf-generator-iot-protocol\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/USG5000V-signal_studio_support.gif\" alt=\"USG5000V SignalStudio software upper-computer interface\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eNative ZigBee, Z-Wave + 5G NR\/WLAN\/LTE\/Bluetooth via SignalStudio\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003ca id=\"lb-usg5022v-p-vector-rf-generator-iot-protocol\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/USG5000V-signal_studio_support.gif\" alt=\"USG5000V SignalStudio software upper-computer interface\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eNative ZigBee, Z-Wave + 5G NR\/WLAN\/LTE\/Bluetooth via SignalStudio\u003c\/span\u003e\n\u003c\/a\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003ch3\u003eIoT and Mobile Communication Protocol Generation\u003c\/h3\u003e\n\u003cp\u003eNative ZigBee and Z-Wave signal generation is built into the instrument's vector engine with flexible modulation parameter settings per protocol — eliminating third-party IoT signal source dependencies for incoming inspection, R\u0026amp;D prototyping, and production-line stimulus. For 5G NR, WLAN, LTE, and Bluetooth waveforms, the instrument pairs with UNI-T's SignalStudio software (sold separately) for protocol-compliant signal simulation across commercial wireless-device R\u0026amp;D and compliance pre-screen.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eOptional Pulse and Narrow-Pulse Generation\u003c\/h3\u003e\n\u003cp\u003eThe optional pulse modulation package adds an on-off ratio of up to 80 dB with customizable pulse-train definitions, enabling single-instrument pulsed RF for radar component test, time-gated stimulus, and EMC pulsed-emission work. The narrow-pulse generator option extends capability to a 40 ns minimum width with 10 ns resolution, addressing test requirements of millimeter-wave radar components used in commercial automotive ADAS suppliers and short-range industrial radar systems.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-usg5022v-p-vector-rf-generator-pulse-modulation\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/USG3000M-USG5000M_pulse.png\" alt=\"USG5000V pulse modulation output waveform\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003ePulse modulation with 80 dB on-off ratio and narrow-pulse generation\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003ca id=\"lb-usg5022v-p-vector-rf-generator-pulse-modulation\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/USG3000M-USG5000M_pulse.png\" alt=\"USG5000V pulse modulation output waveform\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003ePulse modulation with 80 dB on-off ratio and narrow-pulse generation\u003c\/span\u003e\n\u003c\/a\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eUSB Power Sensor Support — Flatness Correction at the DUT Plane (Option USG5000-PK)\u003c\/h3\u003e\n\u003cp\u003eThe optional \u003cstrong\u003eUSG5000-PK\u003c\/strong\u003e software license enables the instrument to read and display power measurements from a user-supplied USB power sensor connected to the front-panel USB Host port. The license is delivered as a file that installs from a USB stick via the instrument's Option Install menu, following the same activation workflow as the Pulse Modulation and GPIB options. A USB power sensor is not included; the user supplies a compatible sensor.\u003c\/p\u003e\n\u003cp\u003eOnce activated, the Power Sensor menu provides measurement frequency entry, frequency coupling to the current RF carrier (with multiplier and offset for harmonic and IF-shifted measurements), measurement averaging, and amplitude offset entry — the standard tools for flatness correction and cable-loss compensation at the DUT plane. The amplitude offset entry is particularly useful when the signal path between the generator and the device under test includes cables, attenuators, or amplifiers: the displayed power reflects what the DUT actually sees, not what leaves the generator's output connector.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-usg5022v-p-vector-rf-generator-power-sensor\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/USG5000V-power_de-embedding.jpg\" alt=\"USG5000V USB power sensor measurement and path-loss compensation\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eLicense-activated USB power sensor support — user supplies sensor\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003ca id=\"lb-usg5022v-p-vector-rf-generator-power-sensor\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/USG5000V-power_de-embedding.jpg\" alt=\"USG5000V USB power sensor measurement and path-loss compensation\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eLicense-activated USB power sensor support — user supplies sensor\u003c\/span\u003e\n\u003c\/a\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003e5-Inch Touch UI with Signal-Flow Interface\u003c\/h3\u003e\n\u003cp\u003eA 5.0-inch high-resolution touch screen provides full touch control over every function except the power switch. The interface is built around a signal-flow diagram — the user sees modulation source, modulation type, sweep mode, and RF carrier as a connected chain rather than as scattered menu items. For an instrument with this much configurable surface area (multiple modulation paths, multiple sweep modes, multiple digital protocols, ARB and multi-carrier work, optional pulse and power-sensor options), the signal-flow paradigm meaningfully cuts setup time on R\u0026amp;D benches where the test configuration changes hour-to-hour.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-usg5022v-p-vector-rf-generator-touch-ui\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/USG5000V-flat_interface.gif\" alt=\"USG5000V touch UI with flat signal-flow interface\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003e5-inch touch screen with signal-flow-guided interface\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003ca id=\"lb-usg5022v-p-vector-rf-generator-touch-ui\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/USG5000V-flat_interface.gif\" alt=\"USG5000V touch UI with flat signal-flow interface\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003e5-inch touch screen with signal-flow-guided interface\u003c\/span\u003e\n\u003c\/a\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-usg5022v-p-vector-rf-generator-automation\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/USG5000V-computer_interface.gif\" alt=\"USG5000V computer interface and automation\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eLAN, USB, optional GPIB with SCPI, Web Control, and Device Manager\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003ca id=\"lb-usg5022v-p-vector-rf-generator-automation\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/USG5000V-computer_interface.gif\" alt=\"USG5000V computer interface and automation\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eLAN, USB, optional GPIB with SCPI, Web Control, and Device Manager\u003c\/span\u003e\n\u003c\/a\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003ch3\u003eFull Automation — SCPI, Web Control, Device Manager\u003c\/h3\u003e\n\u003cp\u003eLAN, USB Host, and USB Device are standard rear-panel interfaces; GPIB is optional. All ports speak the standard SCPI command set, enabling remote operation from any automation-capable host. Test engineers commonly drive the instrument from LabVIEW, Python, MATLAB, or even Excel macros for batch command execution.\u003c\/p\u003e\n\u003cp\u003eWeb Control provides browser-based remote access — point a PC or mobile browser at the instrument's IP address and the full front-panel UI is available remotely, with no client install. Device Manager (UNI-T's free PC software, V2.5.0 and higher) manages the instrument via LAN (VXI-11, Socket), USB Device (USB-TMC), or GPIB, and handles batch instrument inventories on a multi-station test floor.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eDetailed Specifications\u003c\/h2\u003e\n\u003ctable class=\"product-spec-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eFrequency range (CW mode)\u003c\/th\u003e\n\u003ctd\u003e9 kHz to 22 GHz (CW mode)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFrequency range (I\/Q mode)\u003c\/th\u003e\n\u003ctd\u003e\u0026gt;5 MHz to 6 GHz (I\/Q mode)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFrequency resolution\u003c\/th\u003e\n\u003ctd\u003e0.001 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePhase offset step\u003c\/th\u003e\n\u003ctd\u003e0.1°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFrequency switching speed\u003c\/th\u003e\n\u003ctd\u003e≤40 ms (SCPI \/ list \/ step sweep)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLevel settable range\u003c\/th\u003e\n\u003ctd\u003e-135 dBm to +25 dBm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLevel resolution\u003c\/th\u003e\n\u003ctd\u003e0.01 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAmplitude accuracy (Typ.)\u003c\/th\u003e\n\u003ctd\u003e≤0.7 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAttenuator type\u003c\/th\u003e\n\u003ctd\u003eMechanical step attenuator standard (0 to 110 dB, 10 dB steps)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePhase noise (Typ., 20 kHz offset)\u003c\/th\u003e\n\u003ctd\u003e\u0026lt;-122 dBc\/Hz @ 1 GHz, 20 kHz offset\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOscillator aging rate\u003c\/th\u003e\n\u003ctd\u003e≤ ±0.2 ppm\/year\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTemperature effects\u003c\/th\u003e\n\u003ctd\u003e≤ ±10 ppb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInitial calibration accuracy\u003c\/th\u003e\n\u003ctd\u003e≤ ±40 ppb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAnalog modulation\u003c\/th\u003e\n\u003ctd\u003eAM, FM, ΦM (internal \/ external \/ internal+external)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDigital modulation\u003c\/th\u003e\n\u003ctd\u003eQAM, PSK, FSK, ASK (real-time digital standard formats; custom modulation supported)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBaseband bandwidth\u003c\/th\u003e\n\u003ctd\u003e150 MHz real-time baseband bandwidth\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVector modulation EVM (Typ.)\u003c\/th\u003e\n\u003ctd\u003eQPSK EVM 0.4% at 1 GHz carrier (Typ.)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e5G NR ACPR (Typ.)\u003c\/th\u003e\n\u003ctd\u003e5G NR ACPR \u0026lt;-55 dBc at 3.8 GHz carrier (Typ.)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eARB modes\u003c\/th\u003e\n\u003ctd\u003eARB playback, ARB multi-carrier, multi-tone\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNoise injection\u003c\/th\u003e\n\u003ctd\u003eAWGN (additive white Gaussian noise) for receiver testing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIoT protocols (native)\u003c\/th\u003e\n\u003ctd\u003eZigBee, Z-Wave (IoT signal generation and playback)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMobile-comm protocol simulation\u003c\/th\u003e\n\u003ctd\u003e5G NR, WLAN, LTE, Bluetooth, IoT (with SignalStudio software, sold separately)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePulse modulation (option)\u003c\/th\u003e\n\u003ctd\u003e80 dB on-off ratio, customizable pulse trains\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNarrow pulse (option)\u003c\/th\u003e\n\u003ctd\u003eMin width \/ resolution: 40 ns \/ 10 ns\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUSB power sensor (option USG5000-PK)\u003c\/th\u003e\n\u003ctd\u003eLicense-activated; flatness correction with user-supplied USB power sensor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSweep modes\u003c\/th\u003e\n\u003ctd\u003eStep sweep, list sweep (frequency, amplitude)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStep sweep points\u003c\/th\u003e\n\u003ctd\u003e2 to 65535\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eList sweep points\u003c\/th\u003e\n\u003ctd\u003e1 to 500\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDwell time\u003c\/th\u003e\n\u003ctd\u003e100 μs to 100 s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBuilt-in AWG\u003c\/th\u003e\n\u003ctd\u003e50 MHz function \/ arbitrary waveform generator\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eReference (10 MHz)\u003c\/th\u003e\n\u003ctd\u003e10 MHz (in\/out, 50 Ω)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRF output connector\u003c\/th\u003e\n\u003ctd\u003eNMD 2.92 (50 Ω) — supports DC to 40 GHz with 2.92 mm-compatible cabling\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDisplay\u003c\/th\u003e\n\u003ctd\u003e5.0-inch touch screen, signal-flow-guided interface\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandard interfaces\u003c\/th\u003e\n\u003ctd\u003eLAN, USB Host, USB Device (GPIB optional)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRemote control\u003c\/th\u003e\n\u003ctd\u003eSCPI, Web Control (browser), Device Manager (PC software, V2.5.0+)\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003cth\u003eCertifications\u003c\/th\u003e\n\u003ctd\u003eCE | cETLus\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoHS\u003c\/th\u003e\n\u003ctd\u003eCompliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cem\u003eSpecifications subject to change without notice. \"Typ.\" values represent typical performance and are not warranted.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eApplications\u003c\/h2\u003e\n\u003ch3\u003eProtocol-Aware Wireless Device Development\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlagship 22 GHz Wireless and IF-Stage R\u0026amp;D\u003c\/strong\u003e — 22 GHz CW coverage with full vector modulation in the I\/Q band (\u0026gt;5 MHz to 6 GHz) — addresses 5G NR FR2 IF stages, Wi-Fi 7 6 GHz unlicensed band, and commercial automotive radar IF chains with mechanical-attenuator output headroom.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQAM, PSK, FSK, ASK Real-Time Digital Modulation\u003c\/strong\u003e — Custom filter shapes (RRC, Gaussian, user-defined) for protocol-specific test signal generation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eARB Multi-Carrier Mode\u003c\/strong\u003e — Carrier-aggregated LTE \/ 5G NR test signals without external combiners.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAWGN Injection\u003c\/strong\u003e — Real-time noise injection for receiver sensitivity and dynamic-range characterization.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCommercial Production Test and Calibration Labs\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e22 GHz Cal Lab and Spec Verification\u003c\/strong\u003e — Mechanical attenuator and 22 GHz CW range with full vector modulation in the baseband band — covers vector signal analyzer and signal generator commercial calibration work.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCalibration-Grade Vector Modulation Accuracy\u003c\/strong\u003e — QPSK EVM 0.4% typical at 1 GHz supports commercial cal-lab spec verification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB Power Sensor Integration\u003c\/strong\u003e — Optional USG5000-PK license activates flatness correction at the DUT plane with a user-supplied USB power sensor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOCXO Clock Source Standard\u003c\/strong\u003e — ≤±0.2 ppm\/year aging suits calibration-cycle scheduling.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIoT Device R\u0026amp;D and Compliance Pre-Screen\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlagship IoT and Industrial Wireless Test\u003c\/strong\u003e — 22 GHz coverage with mechanical attenuator, vector modulation, AWGN injection, and built-in IoT protocol generation in one chassis — suited to next-generation industrial wireless and commercial compliance pre-screen.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNative ZigBee and Z-Wave Generation\u003c\/strong\u003e — Flexible modulation parameter control (modulation count, modulation method) per protocol.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSignalStudio Protocol Simulation\u003c\/strong\u003e — 5G NR \/ WLAN \/ LTE \/ Bluetooth waveform support via UNI-T SignalStudio software (sold separately).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-Tone Mode\u003c\/strong\u003e — IoT mesh-network coexistence and interference testing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eAccessories \u0026amp; In the Box\u003c\/h2\u003e\n\u003ch3\u003eIncluded\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUSG5022V-P RF signal generator\u003c\/li\u003e\n\u003cli\u003eAC power cord (region-specific)\u003c\/li\u003e\n\u003cli\u003eUSB data cable (UT-D14)\u003c\/li\u003e\n\u003cli\u003eQuick start guide and certificate of conformity\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eRecommended Accessories\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSG5000-PM\u003c\/strong\u003e — Pulse modulation option (license-activated; 80 dB on-off ratio, customizable pulse trains).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSG5000-PG\u003c\/strong\u003e — Narrow-pulse generator option (license-activated; 40 ns minimum width, 10 ns resolution).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSG5000-PK\u003c\/strong\u003e — USB power sensor support option (license-activated; user supplies a compatible USB power sensor).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSG5000-GPIB\u003c\/strong\u003e — GPIB interface option (license-activated; activates the rear-panel GPIB port for legacy automation systems).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSignalStudio + waveform licenses\u003c\/strong\u003e — UNI-T SignalStudio software (sold separately) with optional waveform-playback license packages: BT (Bluetooth), OFDM (custom OFDM), DM (custom digital modulation), VIOT (extended IoT).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2.92 mm cables and adapters\u003c\/strong\u003e — UT-W03-40GHz-2.92J RF cable, UT-C04-40GHz 2.92-KKG connector, UT-CK02 (2 × UT-C04-40GHz 2.92-KKG connectors), UT-C03-18GHz RF adapter SMA-N.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFamily Members\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/usg5014m-analog-rf-gen\"\u003eUSG5014M\u003c\/a\u003e — 14 GHz analog, electronic attenuator.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/usg5014m-p-analog-rf-gen-atten\"\u003eUSG5014M-P\u003c\/a\u003e — 14 GHz analog, mechanical attenuator.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/usg5022m-p-analog-rf-gen-atten\"\u003eUSG5022M-P\u003c\/a\u003e — 22 GHz analog flagship, mechanical attenuator.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/usg5014v-vector-rf-generator\"\u003eUSG5014V\u003c\/a\u003e — 14 GHz vector, electronic attenuator.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/usg5014v-p-vector-rf-generator\"\u003eUSG5014V-P\u003c\/a\u003e — 14 GHz vector, mechanical attenuator.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eWhat is the difference between the V-series and the M-series?\u003c\/p\u003e\n\u003cp\u003eThe M-series is an analog RF signal generator (AM, FM, ΦM with optional pulse and narrow-pulse modulation) suited to amplifier and filter R\u0026amp;D, receiver calibration, and pulsed-RF component test. The V-series adds a full real-time digital modulation engine on the same analog foundation: 150 MHz baseband bandwidth, QAM\/PSK\/FSK\/ASK, ARB playback with multi-carrier, AWGN injection, and native ZigBee\/Z-Wave IoT generation. SignalStudio software (sold separately) extends V-series coverage to 5G NR\/WLAN\/LTE\/Bluetooth. M addresses component-level stimulus; V addresses protocol-aware wireless device development.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eIs there a non-−P 22 GHz variant of the USG5022V-P?\u003c\/p\u003e\n\u003cp\u003eNo. At 22 GHz the USG5022V-P is offered only with the mechanical step attenuator standard — UNI-T does not produce an electronic-attenuator 22 GHz variant. The mechanical attenuator delivers maximum absolute output power across the full 22 GHz band, the typical requirement for Ku-band and K-band component and receiver test. For high-cycle automation at lower bands, the 14 GHz USG5014V with electronic attenuator standard or the USG5014V-P with mechanical attenuator are the options.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eWhat automation interfaces are standard?\u003c\/p\u003e\n\u003cp\u003eLAN, USB Host, and USB Device are standard rear-panel interfaces. GPIB is optional. All ports support the standard SCPI command set, so the instrument drops into any existing automated test station (LabVIEW, Python, MATLAB, Excel) without protocol translation. Web Control provides browser-based remote access via the instrument's IP address — no client install required, works from PC and mobile. UNI-T's free Device Manager PC software (V2.5.0 and higher) handles batch instrument inventories via LAN (VXI-11, Socket), USB Device (USB-TMC), or GPIB.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eWhat does the USG5000-PK power sensor option provide?\u003c\/p\u003e\n\u003cp\u003eUSG5000-PK is a software license that activates USB power sensor support. The user connects a compatible USB-TMC power sensor (sold separately) to the front-panel USB Host port; the instrument displays power measurements on its own screen with menu controls for measurement frequency, frequency coupling (multiplier + offset), amplitude offset for path-loss compensation, and averaging. The primary use case is flatness correction and cable-loss compensation at the DUT plane. License is activated via UNI-T's standard option-install workflow.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003c\/div\u003e","brand":"UNI-T","offers":[{"title":"Default Title","offer_id":53495324246300,"sku":"181300200035X","price":29999.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/USG5000V_1_sq.jpg?v=1770155611","url":"https:\/\/uni-trendus.com\/products\/usg5022v-p","provider":"Uni-Trend US","version":"1.0","type":"link"}