{"product_id":"mso1154hd","title":"MSO1154HD 150 MHz 4Ch 12-Bit Mixed Signal Oscilloscope","description":"\u003ch1\u003eMSO1154HD | 150 MHz 4Ch 12-Bit Mixed Signal Oscilloscope\u003c\/h1\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThe MSO1154HD is a 150 MHz, 4-channel, 12-bit Mixed Signal Oscilloscope built around UNI-T's native 12-bit ADC architecture (R12™). It samples at 2.5 GSa\/s with 100 Mpts of memory depth per channel and captures waveforms at up to 1,000,000 wfms\/s on a 7-inch capacitive touchscreen powered by Ultra Phosphor 3.0 acquisition technology.\u003c\/p\u003e\n\u003cp\u003eBuilt for embedded prototyping and curriculum-grade lab work, the 12-bit ADC delivers 4,096 vertical levels at the full 150 MHz bandwidth — the resolution gain that lets you see small ripple riding on a switching rail, or the subtle gain compression at the edge of an amplifier's linear range, without dropping into ERES averaging. Standard protocol decoding covers the full embedded-systems vocabulary (RS-232, UART, I²C, SPI, RS-422, RS-485, CAN, CAN-FD, LIN, and Audio) at no additional cost. An optional 16-channel logic analyzer pod adds mixed-signal debugging when the project needs it.\u003c\/p\u003e\n\u003cp\u003eThe 9-in-1 architecture consolidates oscilloscope, logic analyzer (with optional UT-M26 pod), spectrum analyzer, protocol analyzer, digital voltmeter, frequency counter, and power analyzer into one instrument.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cdiv class=\"product-key-features\"\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e150 MHz Bandwidth, 4 Analog Channels\u003c\/strong\u003e — Four-channel acquisition at 12-bit native resolution for mixed-signal debugging, switching-power analysis, and precision sensor work.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eR12™ — Native 12-Bit ADC at Full Bandwidth\u003c\/strong\u003e — 4,096 vertical levels at every supported bandwidth — no ERES averaging, no sample-rate trade.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2.5 GSa\/s Sample Rate, 100 Mpts\/Channel\u003c\/strong\u003e — Captures fast edges with sufficient timing resolution and holds long records without dropping sample rate.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1,000,000 wfms\/s Capture Rate\u003c\/strong\u003e — Ultra Phosphor 3.0 intensity-graded display reveals rare anomalies and timing violations that slower scopes miss.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e16 Optional Digital Channels\u003c\/strong\u003e — Add mixed-signal debugging with the \u003ca href=\"\/products\/ut-m26\"\u003eUT-M26 logic probe pod\u003c\/a\u003e for time-correlated analog and digital views.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAll Protocol Decoding Standard\u003c\/strong\u003e — RS-232\/UART, I²C, SPI, RS-422, RS-485, CAN, CAN-FD, LIN, and Audio decoding included at no additional cost.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt-In Spectrum Analyzer\u003c\/strong\u003e — FFT analysis up to 1 Mpts with peak detection and markers for harmonics, clock spurs, and EMI investigation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e56 Automated Measurements\u003c\/strong\u003e — Time, voltage, frequency, and power-quality parameters with statistical analysis and trend graphs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt-In Power Analysis\u003c\/strong\u003e — 12 power-quality parameters including efficiency, ripple, and switching loss for switching-supply characterization.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e7-Inch Capacitive Touchscreen\u003c\/strong\u003e — 1024×600 multi-gesture display with pinch-to-zoom, drag, and gesture navigation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLab-Friendly Connectivity\u003c\/strong\u003e — USB Host\/Device, LAN, AUX Out, HDMI.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eR12™ — Native 12-Bit ADC at Full Bandwidth\u003c\/h3\u003e\n\u003cp\u003eR12™ is UNI-T's native 12-bit ADC architecture. It samples at 4,096 quantization levels — sixteen times the vertical detail of a conventional 8-bit oscilloscope — and holds that resolution at the full 150 MHz bandwidth and 2.5 GSa\/s sample rate. There's no ERES averaging step, no sample-rate trade, and no asterisk on the spec sheet.\u003c\/p\u003e\n\u003cp\u003eFor embedded prototyping at the value tier, R12 is what makes the MSO1154HD a credible benchtop scope rather than a hobby instrument with 12-bit on the spec sheet. On a workbench where the alternative is an 8-bit scope showing quantization steps over a switching-supply ripple measurement, the resolution gain is the difference between a debug session and an afternoon staring at a noisy trace.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-mso1154hd-r12\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO1000HD_12-bit-screen.png\" alt=\"R12 12-bit ADC architecture at full bandwidth\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eNative 12-bit ADC delivers 4,096 vertical levels at full bandwidth\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-mso1154hd-r12\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO1000HD_12-bit-screen.png\" alt=\"R12 12-bit ADC architecture at full bandwidth\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eNative 12-bit ADC delivers 4,096 vertical levels at full bandwidth\u003c\/span\u003e\n\u003c\/a\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eUltra Phosphor 3.0 — 1,000,000 wfms\/s Acquisition\u003c\/h3\u003e\n\u003cp\u003eUltra Phosphor 3.0 drives the acquisition system at up to 1,000,000 waveforms per second with 256 levels of color intensity mapping. The intensity-graded display shows you signal behavior patterns that a slower scope flattens into solid traces — rare glitches, edge jitter, and occasional protocol-layer anomalies appear as faint trace markings against the dominant signal.\u003c\/p\u003e\n\u003cp\u003eFor intermittent-fault investigation, this is the difference between catching the event in a two-minute capture and waiting for it across an overnight run. The probability of capturing rare anomalies scales with capture rate; one million waveforms per second puts you in the territory where most timing violations show up before lunch.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-mso1154hd-phosphor\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO1000HD_Ultra-Phosphor-3.png\" alt=\"Ultra Phosphor 3.0 intensity-graded display\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eUltra Phosphor 3.0 reveals rare events with intensity grading\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-mso1154hd-phosphor\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO1000HD_Ultra-Phosphor-3.png\" alt=\"Ultra Phosphor 3.0 intensity-graded display\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eUltra Phosphor 3.0 reveals rare events with intensity grading\u003c\/span\u003e\n\u003c\/a\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003ch3\u003eDeep Memory — 100 Mpts Per Channel\u003c\/h3\u003e\n\u003cp\u003e100 Mpts of memory depth per channel maintains the full 2.5 GSa\/s sample rate across wide time-base settings — useful when teaching lab modules require capturing an extended sequence (a complete UART transaction, a startup transient, a slow PWM ramp) at sample-rate resolution. Zoom into any portion of the captured record at full resolution.\u003c\/p\u003e\n\u003cp\u003eFor embedded prototyping, deep memory means a single capture catches the slow events between fast edges — the millisecond-scale firmware delay that prevents an interrupt from firing on time, or the sequencing problem on a slow I²C bus. One acquisition replaces a multi-pass debug session.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-mso1154hd-protocols\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO1000HD_Protocols.png\" alt=\"Comprehensive protocol decoding included as standard\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eComprehensive protocol decoding included standard\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003ch3\u003eAll Protocols Included Standard\u003c\/h3\u003e\n\u003cp\u003eUnlike higher-tier families that charge separately for automotive and industrial protocols, the MSO1000HD platform includes RS-232\/UART, I²C, SPI, RS-422, RS-485, CAN, CAN-FD, LIN, and Audio decoding standard at no additional cost. This makes it one of the most complete embedded-debug platforms in its segment, with no surprise license invoices when an automotive project crosses your bench.\u003c\/p\u003e\n\u003cp\u003eEach decoder correlates the physical-layer signal with the decoded data above the trace, so you can see signal-integrity anomalies and protocol errors in the same acquisition. Search and trigger on data patterns, error conditions, or specific bus events to isolate intermittent communication faults.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-mso1154hd-protocols\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO1000HD_Protocols.png\" alt=\"Comprehensive protocol decoding included as standard\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eComprehensive protocol decoding included standard\u003c\/span\u003e\n\u003c\/a\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003ch3\u003eBuilt-In Power Analysis — 12 Parameters\u003c\/h3\u003e\n\u003cp\u003e12 standard power-quality parameters cover efficiency analysis, switching-loss measurement, safe-operating-area visualization, ripple-and-noise characterization, and harmonic content. The measurements run inline on the captured waveform — no scripting, no external software, no PC connection required.\u003c\/p\u003e\n\u003cp\u003eCombined with the 12-bit ADC and 100 Mpts memory, the power-analysis suite handles workloads that previously required a dedicated power analyzer. For switching-supply validation, gate-drive characterization, and small-signal-on-DC-rail measurements, the integrated functions consolidate a multi-instrument workflow into one bench unit.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eBuilt-In Spectrum Analyzer — FFT to 1 Mpts\u003c\/h3\u003e\n\u003cp\u003eFrequency-domain analysis with peak detection, markers, and waterfall display — up to 1 Mpts FFT length. Identify harmonics, clock spurs, switching-frequency content, and EMI contributions without switching to a separate spectrum analyzer or exporting waveform data to PC software.\u003c\/p\u003e\n\u003cp\u003eThe same trace that captured a glitch in the time domain immediately reveals its spectral character on the FFT — useful for chasing down EMI sources during pre-compliance work, or for distinguishing switching-supply harmonics from coupled noise on adjacent rails.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-mso1154hd-fft\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO1000HD_Spectrum-Analyzer.png\" alt=\"Built-in FFT spectrum analyzer up to 1 Mpts\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eBuilt-in FFT spectrum analyzer for harmonics and EMI investigation\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-mso1154hd-fft\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO1000HD_Spectrum-Analyzer.png\" alt=\"Built-in FFT spectrum analyzer up to 1 Mpts\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eBuilt-in FFT spectrum analyzer for harmonics and EMI investigation\u003c\/span\u003e\n\u003c\/a\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003ch3\u003eMixed-Signal Debugging — 16 Optional Digital Channels\u003c\/h3\u003e\n\u003cp\u003e16 optional digital channels add mixed-signal debugging via the \u003ca href=\"\/products\/ut-m26\"\u003eUT-M26 logic probe pod\u003c\/a\u003e. The digital traces display alongside analog channels with full time correlation — see I²C bus traffic and analog ADC output on the same time axis, or watch a control firmware state machine drive the gate signals on a switching power stage.\u003c\/p\u003e\n\u003cp\u003eTime-correlated mixed-signal views are essential for debugging the boundary between firmware and analog hardware. A timing-violation that's invisible on either domain alone often becomes obvious when you can see the digital command and the analog response on the same trace.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003ch3\u003e56 Automated Measurements with Statistics\u003c\/h3\u003e\n\u003cp\u003e56 automated measurements cover time, voltage, frequency, and power-quality parameters with statistical analysis (min, max, mean, standard deviation) and trend graphs over long captures. For QA work and bench characterization, the statistical view is more useful than the instantaneous reading — it tells you whether a parameter is drifting, jittering, or holding steady.\u003c\/p\u003e\n\u003cp\u003ePass\/fail mask testing applies user-defined tolerance bands across captured waveforms — useful for rapid go\/no-go testing during bring-up, or for validating board-to-board consistency in small-volume production.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003ch3\u003eTouch UI and Connectivity\u003c\/h3\u003e\n\u003cp\u003eThe 7-inch 1024×600 capacitive touchscreen supports pinch-to-zoom, drag, and gesture navigation across waveforms, menus, and measurement readouts. For students and lab newcomers, the touch interface lowers the barrier to advanced features that are buried behind menu trees on older instruments.\u003c\/p\u003e\n\u003cp\u003eConnectivity covers USB Host, USB Device, LAN, AUX Out, and HDMI. The HDMI output drives an external display for classroom demonstration, and LAN connectivity integrates the instrument into automated test scripts and remote-access workflows.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eDetailed Specifications\u003c\/h2\u003e\n\u003ctable class=\"product-specs-table\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBandwidth\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e150 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eChannels\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e4 Analog + 16 Optional Digital\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSample Rate\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2.5 GSa\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVertical Resolution\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e12 bits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMemory Depth\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e100 Mpts per channel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCapture Rate\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1,000,000 wfms\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDisplay\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e7-inch capacitive touchscreen, 1024×600\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTouch Screen\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTrigger Modes\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eEdge, pulse width, video, runt, slope, zone, setup\/hold, and more\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eProtocol Decoding (Standard)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eRS-232\/UART, I²C, SPI, RS-422, RS-485, CAN, CAN-FD, LIN, Audio\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBuilt-In FFT\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eYes — up to 1 Mpts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBuilt-In Power Analysis\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e12 parameters\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBuilt-In Spectrum Analyzer\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAutomated Measurements\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e56 with statistics\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBuilt-In AWG\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNo (available on -S models)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBode Plot Analysis\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNo (available on -S models)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eLogic Analyzer\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eOptional 16-channel via UT-M26 pod\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eInterface\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUSB Host \/ USB Device \/ LAN \/ AUX Out \/ HDMI\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eRoHS Compliant\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eApplications\u003c\/h2\u003e\n\u003ch3\u003eR\u0026amp;D Engineer (Embedded \/ Hardware Design)\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEmbedded Systems Prototyping\u003c\/strong\u003e — Mixed-signal debug for microcontroller boards, sensor interfaces, and low-power IoT designs. The 12-bit ADC reveals sensor-output detail that 8-bit scopes flatten into noise.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMixed-Signal Debug\u003c\/strong\u003e — Time-correlated analog and digital views with the optional UT-M26 logic pod. Track firmware state machines against analog responses on the same trace.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtocol Investigation\u003c\/strong\u003e — All standard embedded protocols included; no license fees for automotive (CAN, CAN-FD, LIN), industrial (RS-422\/485), or audio buses.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSignal Integrity Spot Checks\u003c\/strong\u003e — FFT analysis identifies harmonics, clock spurs, and EMI sources without switching to a separate spectrum analyzer.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eEducation (Teaching Labs, Trade Schools, Community Colleges)\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-Station Teaching Labs\u003c\/strong\u003e — Twelve-bit resolution and full protocol coverage in a value-tier instrument lets you fit professional measurement capability into a curriculum-grade station budget.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTouchscreen UI Lowers Operator Barrier\u003c\/strong\u003e — Pinch-to-zoom and gesture navigation are familiar from consumer devices; students focus on the measurement, not the menu structure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSame Platform Across Course Levels\u003c\/strong\u003e — Beginning students use basic edge triggering; advanced students access protocol decode, FFT, and power-quality measurements on the same instrument.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHDMI Output for Classroom Display\u003c\/strong\u003e — Drive an external monitor or projector for classroom demonstration of waveform examples.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eAccessories \u0026amp; In the Box\u003c\/h2\u003e\n\u003ch3\u003eIncluded with the Instrument\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMSO1154HD oscilloscope\u003c\/li\u003e\n\u003cli\u003e4 × passive probes (1:1 \/ 10:1 switchable, bandwidth matched to instrument)\u003c\/li\u003e\n\u003cli\u003eUSB cable (USB-A to USB-B)\u003c\/li\u003e\n\u003cli\u003ePower cord (region-appropriate)\u003c\/li\u003e\n\u003cli\u003eQuick-start guide\u003c\/li\u003e\n\u003cli\u003eFactory calibration certificate\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eRecommended Accessories\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/ut-m26\"\u003eUT-M26\u003c\/a\u003e — 16-channel logic probe pod for mixed-signal debugging\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/ut-p07a\"\u003eUT-P07A\u003c\/a\u003e — 500 MHz passive probe for higher-bandwidth applications\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/ut-p20\"\u003eUT-P20\u003c\/a\u003e, \u003ca href=\"\/products\/ut-p21\"\u003eUT-P21\u003c\/a\u003e, \u003ca href=\"\/products\/ut-v23\"\u003eUT-V23\u003c\/a\u003e — high-voltage passive probes\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/ut-p30\"\u003eUT-P30\u003c\/a\u003e, \u003ca href=\"\/products\/ut-p31\"\u003eUT-P31\u003c\/a\u003e, \u003ca href=\"\/products\/ut-p32\"\u003eUT-P32\u003c\/a\u003e, \u003ca href=\"\/products\/ut-p33\"\u003eUT-P33\u003c\/a\u003e — differential probes for floating measurements\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/ut-p40\"\u003eUT-P40\u003c\/a\u003e, \u003ca href=\"\/products\/ut-p41\"\u003eUT-P41\u003c\/a\u003e, \u003ca href=\"\/products\/ut-p42\"\u003eUT-P42\u003c\/a\u003e, \u003ca href=\"\/products\/ut-p43\"\u003eUT-P43\u003c\/a\u003e, \u003ca href=\"\/products\/ut-p44\"\u003eUT-P44\u003c\/a\u003e — current probes for power-stage and switching-loss measurement\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/ut-isot\"\u003eUT-ISOT\u003c\/a\u003e — isolation transformer for safe line-powered measurements\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/ut-m13x-oscilloscope-demo-board\"\u003eUT-M13X\u003c\/a\u003e — oscilloscope demo board for protocol decoding practice and curriculum modules\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNeed an integrated signal generator? See the \u003ca href=\"\/products\/mso1154hd-s-150mhz-2ch-mso-with-awg\"\u003eMSO1154HD-S\u003c\/a\u003e for the same platform with a 25 MHz AWG and Bode plot analysis added. Need 250 MHz bandwidth for power-electronics work? See the \u003ca href=\"\/products\/mso1254hd-250mhz-2ch-mso\"\u003eMSO1254HD\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eWhat protocols are included with the MSO1154HD?\u003c\/p\u003e\n\u003cp\u003eRS-232\/UART, I²C, SPI, RS-422, RS-485, CAN, CAN-FD, LIN, and Audio decoding are included standard at no additional cost. All supported protocols are available out of the box — no optional licenses required.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eWhat is the advantage of native 12-bit resolution?\u003c\/p\u003e\n\u003cp\u003eA 12-bit ADC provides 4,096 vertical levels compared to 256 for an 8-bit scope — sixteen times greater detail. This reveals small signals riding on large ones, reduces quantization noise, and improves measurement accuracy on low-amplitude signals like power-supply ripple, sensor outputs, and precision analog circuits. R12™ holds the 12-bit resolution at the full bandwidth and sample rate, with no ERES averaging or sample-rate trade-off.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eCan I add digital channels for mixed-signal debugging?\u003c\/p\u003e\n\u003cp\u003eYes. The \u003ca href=\"\/products\/ut-m26\"\u003eUT-M26 logic probe pod\u003c\/a\u003e adds 16 digital channels for time-correlated analog and digital views.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eDoes this model include a signal generator?\u003c\/p\u003e\n\u003cp\u003eNo. For an integrated 1-channel 25 MHz AWG with Bode plot analysis, see the \u003ca href=\"\/products\/mso1154hd-s-150mhz-2ch-mso-with-awg\"\u003eMSO1154HD-S\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eHow does the MSO1154HD compare to the higher-bandwidth UPO2000HD or MSO3000HD scopes?\u003c\/p\u003e\n\u003cp\u003eThe MSO1000HD platform shares the same R12™ 12-bit ADC architecture, Ultra Phosphor 3.0 acquisition, and standard-included protocol decoding as the UPO2000HD and MSO3000HD families. The differences are bandwidth (150–250 MHz here vs 100–500 MHz on UPO2000HD and 350–1000 MHz on MSO3000HD), capture rate (1,000,000 wfms\/s here vs 1,500,000 wfms\/s on MSO3000HD), and the front-panel form factor. For embedded prototyping and mid-tier power-electronics work, the MSO1000HD platform delivers the same architectural advantages at a lower price point.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eIs the firmware field-upgradable?\u003c\/p\u003e\n\u003cp\u003eYes. Firmware updates are free over the product's lifetime and install via USB drive or LAN transfer. Optional license unlocks (such as the LA16 logic-analyzer license, when ordered with the UT-M26 pod) have no expiration.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003c\/div\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003cp\u003ePart of the \u003ca href=\"\/collections\/mso1000hd\"\u003eMSO1000HD oscilloscope series\u003c\/a\u003e. See the \u003ca href=\"\/collections\/mso1000hd\"\u003eseries page\u003c\/a\u003e to compare bandwidth and channel options across the lineup.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"UNI-T","offers":[{"title":"181100300118X","offer_id":53688519295260,"sku":"181100300118X","price":659.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/MSO1154HD-S_1_sq.jpg?v=1755013543","url":"https:\/\/uni-trendus.com\/products\/mso1154hd","provider":"Uni-Trend US","version":"1.0","type":"link"}