{"title":"UTG900Plus Function Generators","description":null,"products":[{"product_id":"utg920plus","title":"UTG920Plus 200 MHz 2Ch Function\/Arbitrary Waveform Generator","description":"\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThe UTG920Plus is a 200 MHz, two-channel function\/arbitrary waveform generator with a 16-bit DAC, 1.25 GSa\/s sampling (2× interpolation) and up to 128 Mpts of arbitrary memory per channel. It is the top model of the UTG900Plus Series, operated from a 7-inch 1024 × 600 capacitive touchscreen.\u003c\/p\u003e\n\u003cp\u003eEach channel produces sine to 200 MHz, square and pulse to 50 MHz and ramp to 5 MHz with 1 μHz resolution, and noise, harmonics (2nd to 16th), PRBS, DC, arbitrary, multi-pulse and expression waveforms. Output reaches 20 Vpp into high impedance at up to 40 MHz, typical phase noise is ≤-130 dBc\/Hz (10 MHz, 10 kHz offset) and THD is below 0.07% from DC to 20 kHz.\u003c\/p\u003e\n\u003cp\u003eFifteen modulation types, four sweep modes and three burst modes are built in, along with a 600 MHz hardware frequency counter, channel coupling and merging, 10 MHz reference in and out, LAN, USB host and device, HDMI and SCPI control. The 1.5 kg chassis is powered over USB Type-C, from the supplied adapter or a PD power bank. Backed by the 3+2 warranty: three years standard, plus two more years when you register the instrument for free.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cdiv class=\"product-key-features\"\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e200 MHz sine, 50 MHz square and pulse\u003c\/strong\u003e — two equal-performance, independent channels with 1 μHz frequency resolution.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e16-bit, 1.25 GSa\/s\u003c\/strong\u003e — 2× interpolation; point-by-point arbitrary output up to 625 MSa\/s.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUp to 128 Mpts arbitrary memory per channel\u003c\/strong\u003e — 256 Mpts per channel through the PC software; DDS mode at 8 kpts; over 200 built-in waveforms; 1 GB of file storage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow-distortion output\u003c\/strong\u003e — THD below 0.07% (DC to 20 kHz), phase noise ≤-130 dBc\/Hz typical at 10 MHz, 10 kHz offset.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUp to 20 Vpp\u003c\/strong\u003e into high impedance (≤40 MHz), 4 Vpp at 200 MHz; ±10 V DC offset into high impedance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFast pulse\u003c\/strong\u003e — edges adjustable from 5 ns, 8 ns minimum width with 100 ps steps, 150 ps jitter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e15 modulation types\u003c\/strong\u003e — AM, FM, PM, DSB-AM, ASK, FSK, PSK, 3FSK, 4FSK, BPSK, QPSK, OSK, SUM, QAM and PWM.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSweep, burst, PRBS, harmonics, multi-pulse and expressions\u003c\/strong\u003e — linear, logarithmic, step and list sweep; N-cycle, gated and infinite burst; PN3 to PN33 at up to 150 Mbps.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e600 MHz hardware frequency counter\u003c\/strong\u003e — 100 mHz to 600 MHz on a 14-digit display, AC or DC coupling, 50 Ω or 1 MΩ input.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e7-inch 1024 × 600 capacitive touchscreen\u003c\/strong\u003e with keypad, knob and dedicated waveform keys.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnectivity\u003c\/strong\u003e — USB host and device, LAN, HDMI, 10 MHz reference in and out, front Aux I\/O, SCPI, browser control and a PC arbitrary waveform editor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1.5 kg, USB Type-C power\u003c\/strong\u003e — supplied USB Type-C power adapter, or a PD power bank that delivers 12 V \/ 3 A; under 25 W.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eDetailed Features\u003c\/h2\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003e200 MHz on both channels\u003c\/h3\u003e\n\u003cp\u003eBoth channels carry the full specification: 200 MHz sine, 50 MHz square and pulse and the same amplitude range, so a clock and a data line, or a stimulus and its reference, come from one instrument without a weaker second channel.\u003c\/p\u003e\n\u003cp\u003eFrequency, amplitude and phase can be coupled between the channels by ratio or offset, channel tracking mirrors one channel's settings onto the other, and the merge function combines both channels into one output.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-utg920plus-dual-channel\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UTG900Plus_body_dual-channel.jpg\" alt=\"UTG920Plus two-channel sine output on an oscilloscope\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eTwo synchronized channels on an oscilloscope.\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-utg920plus-dual-channel\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UTG900Plus_body_dual-channel.jpg\" alt=\"UTG920Plus two-channel sine output on an oscilloscope\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eTwo synchronized channels on an oscilloscope.\u003c\/span\u003e\n\u003c\/a\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-utg920plus-low-distortion\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UTG900Plus_body_low-distortion.jpg\" alt=\"UTG920Plus sine output spectrum showing low spurious content\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eSpectrum of the sine output.\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003ch3\u003eLow-distortion sine output\u003c\/h3\u003e\n\u003cp\u003eTHD stays below 0.07% from DC to 20 kHz, and harmonic distortion is specified at ≤-60 dBc to 1 MHz down to ≤-40 dBc at 200 MHz (0 dBm, typical). Typical phase noise is ≤-130 dBc\/Hz at 10 MHz with a 10 kHz offset.\u003c\/p\u003e\n\u003cp\u003eSmall signals can sit on a large DC offset with low added noise, which suits ripple injection and sensor-input tests where the stimulus has to be cleaner than the device under test.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-utg920plus-low-distortion\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UTG900Plus_body_low-distortion.jpg\" alt=\"UTG920Plus sine output spectrum showing low spurious content\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eSpectrum of the sine output.\u003c\/span\u003e\n\u003c\/a\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003ePulse and fast edges\u003c\/h3\u003e\n\u003cp\u003ePulse output runs to 50 MHz with a minimum width of 8 ns (typical), width adjustable in 100 ps steps and rise and fall times adjustable from 5 ns up to 1,000 s, so the generator can stand in for a dedicated pulse generator.\u003c\/p\u003e\n\u003cp\u003eSquare-wave edges are under 5 ns (typical) with less than 2% overshoot, and jitter is 200 ps above 5 MHz.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-utg920plus-pulse\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UTG900Plus_body_pulse.jpg\" alt=\"UTG920Plus pulse with adjustable edge time on an oscilloscope\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003ePulse edge measured on an oscilloscope.\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-utg920plus-pulse\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UTG900Plus_body_pulse.jpg\" alt=\"UTG920Plus pulse with adjustable edge time on an oscilloscope\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003ePulse edge measured on an oscilloscope.\u003c\/span\u003e\n\u003c\/a\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-utg920plus-prbs\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UTG900Plus_body_prbs.jpg\" alt=\"UTG920Plus PRBS settings screen\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003ePRBS bit rate, pattern and edge-time settings.\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003ch3\u003ePRBS patterns\u003c\/h3\u003e\n\u003cp\u003eFifteen pseudo-random binary sequences from PN3 to PN33 run at bit rates from 1 μbps to 150 Mbps, with edge times adjustable from 5 ns to 1 ks.\u003c\/p\u003e\n\u003cp\u003eThey provide repeatable digital stress patterns for receiver, data-path and line-coding tests, and the same sequences drive the BPSK, QPSK and QAM modulators.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-utg920plus-prbs\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UTG900Plus_body_prbs.jpg\" alt=\"UTG920Plus PRBS settings screen\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003ePRBS bit rate, pattern and edge-time settings.\u003c\/span\u003e\n\u003c\/a\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eNoise superposition and SNR control\u003c\/h3\u003e\n\u003cp\u003eNoise of up to 1 Vrms can be added to sine, square, pulse, ramp, arbitrary and PRBS outputs, and a one-touch SNR setting sets the signal-to-noise ratio directly.\u003c\/p\u003e\n\u003cp\u003eIt is a quick way to check how a receiver, filter or detector behaves as the signal degrades.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-utg920plus-noise\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UTG900Plus_body_noise.jpg\" alt=\"UTG920Plus noise superposition settings and resulting waveform\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eNoise added to a sine (left) and the resulting output (right).\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-utg920plus-noise\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UTG900Plus_body_noise.jpg\" alt=\"UTG920Plus noise superposition settings and resulting waveform\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eNoise added to a sine (left) and the resulting output (right).\u003c\/span\u003e\n\u003c\/a\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-utg920plus-noise-bandwidth\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UTG900Plus_body_noise-bandwidth.jpg\" alt=\"UTG920Plus noise filter settings\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eNoise filter type and cutoff frequency.\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003ch3\u003eAdjustable noise bandwidth\u003c\/h3\u003e\n\u003cp\u003eThe noise source is flat (typical, -3 dB) from 1 mHz to 200 MHz, and its bandwidth can be limited with low-pass, high-pass or band-pass filtering to model a specific noise environment.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-utg920plus-noise-bandwidth\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UTG900Plus_body_noise-bandwidth.jpg\" alt=\"UTG920Plus noise filter settings\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eNoise filter type and cutoff frequency.\u003c\/span\u003e\n\u003c\/a\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003e15 modulation types\u003c\/h3\u003e\n\u003cp\u003eAM, FM, PM, DSB-AM, ASK, FSK, PSK, 3FSK, 4FSK, BPSK, QPSK, OSK, SUM, QAM and PWM cover analog and digital modulation. QAM runs from QAM4 to QAM256, BPSK, QPSK and QAM use PN3 to PN33 symbols at up to 2 Mbps, and the internal modulating source reaches 2 MHz.\u003c\/p\u003e\n\u003cp\u003eAM, FM, PM, SUM and PWM can also take an external modulating signal through the front Aux I\/O connector, and each channel modulates independently.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-utg920plus-modulation\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UTG900Plus_body_modulation.jpg\" alt=\"UTG920Plus BPSK modulation settings\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eBPSK modulation settings.\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-utg920plus-modulation\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UTG900Plus_body_modulation.jpg\" alt=\"UTG920Plus BPSK modulation settings\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eBPSK modulation settings.\u003c\/span\u003e\n\u003c\/a\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-utg920plus-sweep\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UTG900Plus_body_sweep.jpg\" alt=\"UTG920Plus linear sweep settings\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eLinear sweep start, stop and time settings.\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003ch3\u003eFour sweep modes\u003c\/h3\u003e\n\u003cp\u003eLinear, logarithmic, step and list sweeps run from internal, external or manual triggers. Sweep and dwell times run from 1 ms to 500 s, step sweeps take 2 to 2,048 steps, and a list file holds up to 2,048 frequency points.\u003c\/p\u003e\n\u003cp\u003eA trigger output marks each sweep for an oscilloscope or analyzer, which makes frequency-response measurements straightforward.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-utg920plus-sweep\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UTG900Plus_body_sweep.jpg\" alt=\"UTG920Plus linear sweep settings\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eLinear sweep start, stop and time settings.\u003c\/span\u003e\n\u003c\/a\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eThree burst modes\u003c\/h3\u003e\n\u003cp\u003eN-cycle bursts of 1 to 4,294,967,295 cycles, gated bursts and infinite bursts run from internal, external or manual triggers, with start phase set from 0° to 360°.\u003c\/p\u003e\n\u003cp\u003eThe level between bursts can be the default, high, low or a custom value, so the idle state matches the circuit under test.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-utg920plus-burst\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UTG900Plus_body_burst.jpg\" alt=\"UTG920Plus N-cycle burst settings\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eN-cycle burst settings.\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-utg920plus-burst\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UTG900Plus_body_burst.jpg\" alt=\"UTG920Plus N-cycle burst settings\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eN-cycle burst settings.\u003c\/span\u003e\n\u003c\/a\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-utg920plus-expression\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UTG900Plus_body_expression.jpg\" alt=\"UTG920Plus expression waveform settings\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eA sin(x) expression waveform.\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003ch3\u003eHarmonics, multi-pulse and expressions\u003c\/h3\u003e\n\u003cp\u003eThe harmonic function builds a waveform from the 2nd to the 16th harmonic, odd, even, all or custom, with the amplitude and phase of each order set separately, at frequencies up to 100 MHz.\u003c\/p\u003e\n\u003cp\u003eMulti-pulse output generates 2 to 30 pulses with individual widths and gaps from 20 ns, and the expression editor defines a waveform from a formula using functions such as sin, cos, sinc, exp, ln and sqrt.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-utg920plus-expression\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UTG900Plus_body_expression.jpg\" alt=\"UTG920Plus expression waveform settings\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eA sin(x) expression waveform.\u003c\/span\u003e\n\u003c\/a\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eMulti-pulse output\u003c\/h3\u003e\n\u003cp\u003eEach pulse in a multi-pulse train has its own width, gap and edge times, with internal, external or manual triggering and a trigger delay of up to 1 ks.\u003c\/p\u003e\n\u003cp\u003ePulse sequences for double-pulse tests, timing checks and stepper or gate-drive stimulus can be built on the instrument without a separate pattern source.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-utg920plus-multi-pulse\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UTG900Plus_body_multi-pulse.jpg\" alt=\"UTG920Plus multi-pulse settings table\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eMulti-pulse width, gap and edge settings.\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-utg920plus-multi-pulse\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UTG900Plus_body_multi-pulse.jpg\" alt=\"UTG920Plus multi-pulse settings table\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eMulti-pulse width, gap and edge settings.\u003c\/span\u003e\n\u003c\/a\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-utg920plus-channel-merge\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UTG900Plus_body_channel-merge.jpg\" alt=\"UTG920Plus channel merge diagram\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eCH1 and CH2 combined on one output.\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003ch3\u003eChannel merge\u003c\/h3\u003e\n\u003cp\u003eChannel merge adds CH1 and CH2 on one output, for two-tone tests or a signal with an interfering tone. Merge, coupling and channel copy are set from the Utility menu.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-utg920plus-channel-merge\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UTG900Plus_body_channel-merge.jpg\" alt=\"UTG920Plus channel merge diagram\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eCH1 and CH2 combined on one output.\u003c\/span\u003e\n\u003c\/a\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003e600 MHz frequency counter\u003c\/h3\u003e\n\u003cp\u003eThe built-in hardware counter measures external signals from 100 mHz to 600 MHz on a 14-digit display, with AC or DC coupling and a 50 Ω or 1 MΩ input. It shows frequency, period, duty cycle and pulse widths with statistics.\u003c\/p\u003e\n\u003cp\u003eA source frequency can be checked without a separate counter on the bench.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-utg920plus-counter\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UTG900Plus_body_counter.jpg\" alt=\"UTG920Plus frequency counter readings with statistics\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eCounter readings with statistics.\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-utg920plus-counter\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UTG900Plus_body_counter.jpg\" alt=\"UTG920Plus frequency counter readings with statistics\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eCounter readings with statistics.\u003c\/span\u003e\n\u003c\/a\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-utg920plus-arb-editor\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UTG900Plus_body_arb-editor.jpg\" alt=\"UTG920Plus arbitrary waveform on the instrument and in the PC editor\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eArbitrary waveform on the instrument (left) and in the PC editor (right).\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003ch3\u003eArbitrary waveforms and editor\u003c\/h3\u003e\n\u003cp\u003ePoint-by-point arbitrary output plays from 8 points to 128 Mpts per channel, or 256 Mpts per channel loaded from the PC software, at up to 625 MSa\/s, with zero-order-hold or linear-interpolation filtering. DDS mode uses 8 kpts at up to 50 MHz.\u003c\/p\u003e\n\u003cp\u003eOver 200 built-in waveforms are stored in non-volatile memory, and up to 1 GB of .bsv or .csv files can be stored on the instrument or loaded from a USB flash drive. Waveforms can be drawn or edited on the touchscreen or in the PC editor, which connects over USB or LAN.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-utg920plus-arb-editor\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UTG900Plus_body_arb-editor.jpg\" alt=\"UTG920Plus arbitrary waveform on the instrument and in the PC editor\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eArbitrary waveform on the instrument (left) and in the PC editor (right).\u003c\/span\u003e\n\u003c\/a\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eRemote control\u003c\/h3\u003e\n\u003cp\u003eOver USB or LAN the generator takes SCPI commands, works with the UNI-T PC software for control, monitoring and automated tests, and can be operated from a web browser after login.\u003c\/p\u003e\n\u003cp\u003eIt is also compatible with the NeptuneLab laboratory management software.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-utg920plus-remote\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UTG900Plus_body_remote.jpg\" alt=\"UTG920Plus controlled from PC software on a laptop\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eControl from the PC software.\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-utg920plus-remote\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UTG900Plus_body_remote.jpg\" alt=\"UTG920Plus controlled from PC software on a laptop\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eControl from the PC software.\u003c\/span\u003e\n\u003c\/a\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-utg920plus-type-c\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UTG900Plus_body_type-c.jpg\" alt=\"UTG920Plus powered from a USB Type-C power bank\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eUSB Type-C PD power from a power bank (power bank not included).\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003ch3\u003ePortable with USB Type-C power\u003c\/h3\u003e\n\u003cp\u003eAt 282 × 175 × 49 mm and 1.5 kg, the generator moves easily between benches. It is powered over USB Type-C, from the supplied power adapter or from a PD power bank that delivers 12 V at 3 A (power bank not included), and draws less than 25 W.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-utg920plus-type-c\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UTG900Plus_body_type-c.jpg\" alt=\"UTG920Plus powered from a USB Type-C power bank\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eUSB Type-C PD power from a power bank (power bank not included).\u003c\/span\u003e\n\u003c\/a\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eRear-panel connections\u003c\/h3\u003e\n\u003cp\u003eThe rear panel has the LAN and USB Device ports, the USB Type-C power input, 10 MHz reference input and output and a security lock slot, and an HDMI output sits on the side panel. The front panel adds a USB host port for flash drives and the Aux I\/O connector for modulation input, trigger input and output, sync output and the counter input.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-utg920plus-rear-panel\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UTG900Plus_body_rear-panel.jpg\" alt=\"UTG920Plus rear panel connections\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eRear panel I\/O.\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-utg920plus-rear-panel\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UTG900Plus_body_rear-panel.jpg\" alt=\"UTG920Plus rear panel connections\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eRear panel I\/O.\u003c\/span\u003e\n\u003c\/a\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eApplications\u003c\/h2\u003e\n\u003ch3\u003eElectronics teaching labs\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOne instrument covers function, arbitrary, modulation, sweep and burst exercises, with a touchscreen students can follow.\u003c\/li\u003e\n\u003cli\u003eTwo equal channels support phase, Lissajous and differential exercises.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eEmbedded and digital design\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eGenerate clocks, PRBS patterns at up to 150 Mbps and multi-pulse trains with edges from 5 ns.\u003c\/li\u003e\n\u003cli\u003eUse the trigger output and burst modes to drive timing and reset tests.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCommunications and RF development\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eGenerate ASK, FSK, PSK, BPSK, QPSK and QAM signals for receiver and demodulator work.\u003c\/li\u003e\n\u003cli\u003eAdd noise with a set SNR to check sensitivity and error performance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAnalog, power and sensor testing\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eInject ripple or small signals on a DC offset and sweep frequency response with a marker output.\u003c\/li\u003e\n\u003cli\u003eRecreate captured sensor signals from arbitrary files of up to 128 Mpts per channel.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eIn the Box\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eUSB Type-C power adapter (12 V, 3 A)\u003c\/li\u003e\n\u003cli\u003eUSB data cable (UT-D14)\u003c\/li\u003e\n\u003cli\u003eBNC-to-BNC cable (UT-L45)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eInstrument dimensions 282 × 175 × 49 mm (W × H × D), 1.5 kg.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat is the difference between the four UTG900Plus models?\u003c\/h3\u003e\n\u003cp\u003eMaximum output frequency: the UTG920Plus (200 MHz), UTG916Plus (160 MHz), UTG912Plus (120 MHz) and UTG908Plus (80 MHz). Square and pulse reach 50, 40, 30 and 20 MHz respectively. All four share the 16-bit, 1.25 GSa\/s architecture, 128 Mpts per channel of arbitrary memory, 15 modulation types, the 600 MHz counter and the 7-inch touchscreen.\u003c\/p\u003e\n\u003ch3\u003eIs 1.25 GSa\/s the native sample rate?\u003c\/h3\u003e\n\u003cp\u003e1.25 GSa\/s is reached with 2× interpolation. Point-by-point arbitrary waveforms play at up to 625 MSa\/s.\u003c\/p\u003e\n\u003ch3\u003eCan it run without mains power?\u003c\/h3\u003e\n\u003cp\u003eYes. The generator is powered over USB Type-C, so besides the supplied adapter it runs from a PD power bank that provides 12 V at 3 A. A power bank is not included.\u003c\/p\u003e\n\u003ch3\u003eHow is the UTG900Plus different from the UTG2000X?\u003c\/h3\u003e\n\u003cp\u003eBoth are two-channel, 16-bit generators with 1.25 GSa\/s sampling using 2× interpolation and the same modulation set. The UTG900Plus reaches up to 200 MHz instead of 120 MHz, holds 128 Mpts per channel instead of 32 Mpts, and has a 7-inch 1024 × 600 touchscreen instead of 4.3 inches, in a 1.5 kg chassis with USB Type-C power.\u003c\/p\u003e\n\u003ch3\u003eWhat warranty applies?\u003c\/h3\u003e\n\u003cp\u003eThree years standard, plus two more years when you register the instrument for free.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"UNI-T","offers":[{"title":"Default Title","offer_id":54925302628636,"sku":"181300100167X","price":1199.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UNI-T_UTG900Plus_1_sq_046e5e26-00cd-45c1-9d74-9ff4a4801470.jpg?v=1794861548"},{"product_id":"utg916plus","title":"UTG916Plus 160 MHz 2Ch Function\/Arbitrary Waveform Generator","description":"\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eTwo equal-performance channels at 160 MHz sine and 40 MHz square: the UTG916Plus pairs a 16-bit DAC with 1.25 GSa\/s sampling (2× interpolation) and up to 128 Mpts of arbitrary memory per channel, all set up on a 7-inch 1024 × 600 touchscreen.\u003c\/p\u003e\n\u003cp\u003eEach channel produces sine to 160 MHz, square and pulse to 40 MHz and ramp to 5 MHz with 1 μHz resolution, and noise, harmonics (2nd to 16th), PRBS, DC, arbitrary, multi-pulse and expression waveforms. Output reaches 20 Vpp into high impedance at up to 40 MHz, typical phase noise is ≤-130 dBc\/Hz (10 MHz, 10 kHz offset) and THD is below 0.07% from DC to 20 kHz.\u003c\/p\u003e\n\u003cp\u003eFifteen modulation types, four sweep modes and three burst modes are built in, along with a 600 MHz hardware frequency counter, channel coupling and merging, 10 MHz reference in and out, LAN, USB host and device, HDMI and SCPI control. The 1.5 kg chassis is powered over USB Type-C, from the supplied adapter or a PD power bank. Backed by the 3+2 warranty: three years standard, plus two more years when you register the instrument for free.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cdiv class=\"product-key-features\"\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e160 MHz sine, 40 MHz square and pulse\u003c\/strong\u003e — two equal-performance, independent channels with 1 μHz frequency resolution.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e16-bit, 1.25 GSa\/s\u003c\/strong\u003e — 2× interpolation; point-by-point arbitrary output up to 625 MSa\/s.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUp to 128 Mpts arbitrary memory per channel\u003c\/strong\u003e — 256 Mpts per channel through the PC software; DDS mode at 8 kpts; over 200 built-in waveforms; 1 GB of file storage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow-distortion output\u003c\/strong\u003e — THD below 0.07% (DC to 20 kHz), phase noise ≤-130 dBc\/Hz typical at 10 MHz, 10 kHz offset.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUp to 20 Vpp\u003c\/strong\u003e into high impedance (≤40 MHz), 4 Vpp at 160 MHz; ±10 V DC offset into high impedance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFast pulse\u003c\/strong\u003e — edges adjustable from 5 ns, 8 ns minimum width with 100 ps steps, 150 ps jitter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e15 modulation types\u003c\/strong\u003e — AM, FM, PM, DSB-AM, ASK, FSK, PSK, 3FSK, 4FSK, BPSK, QPSK, OSK, SUM, QAM and PWM.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSweep, burst, PRBS, harmonics, multi-pulse and expressions\u003c\/strong\u003e — linear, logarithmic, step and list sweep; N-cycle, gated and infinite burst; PN3 to PN33 at up to 150 Mbps.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e600 MHz hardware frequency counter\u003c\/strong\u003e — 100 mHz to 600 MHz on a 14-digit display, AC or DC coupling, 50 Ω or 1 MΩ input.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e7-inch 1024 × 600 capacitive touchscreen\u003c\/strong\u003e with keypad, knob and dedicated waveform keys.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnectivity\u003c\/strong\u003e — USB host and device, LAN, HDMI, 10 MHz reference in and out, front Aux I\/O, SCPI, browser control and a PC arbitrary waveform editor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1.5 kg, USB Type-C power\u003c\/strong\u003e — supplied USB Type-C power adapter, or a PD power bank that delivers 12 V \/ 3 A; under 25 W.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eDetailed Features\u003c\/h2\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eTwo equal channels at 160 MHz\u003c\/h3\u003e\n\u003cp\u003eThe UTG916Plus delivers 160 MHz sine and 40 MHz square and pulse on both channels with the same amplitude range and resolution, so either channel can be the stimulus and the other the reference or a second test signal.\u003c\/p\u003e\n\u003cp\u003eFrequency, amplitude and phase can be coupled between the channels by ratio or offset, and the merge function combines both channels into one output for two-tone and signal-plus-interference tests.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-utg916plus-dual-channel\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UTG900Plus_body_dual-channel.jpg\" alt=\"UTG916Plus two-channel sine output on an oscilloscope\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eTwo synchronized channels on an oscilloscope.\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-utg916plus-dual-channel\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UTG900Plus_body_dual-channel.jpg\" alt=\"UTG916Plus two-channel sine output on an oscilloscope\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eTwo synchronized channels on an oscilloscope.\u003c\/span\u003e\n\u003c\/a\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-utg916plus-low-distortion\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UTG900Plus_body_low-distortion.jpg\" alt=\"UTG916Plus sine output spectrum showing low spurious content\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eSpectrum of the sine output.\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003ch3\u003eLow-distortion sine output\u003c\/h3\u003e\n\u003cp\u003eTHD stays below 0.07% from DC to 20 kHz, and harmonic distortion is specified at ≤-60 dBc to 1 MHz down to ≤-40 dBc at 160 MHz (0 dBm, typical). Typical phase noise is ≤-130 dBc\/Hz at 10 MHz with a 10 kHz offset.\u003c\/p\u003e\n\u003cp\u003eSmall signals can sit on a large DC offset with low added noise, which suits ripple injection and sensor-input tests where the stimulus has to be cleaner than the device under test.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-utg916plus-low-distortion\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UTG900Plus_body_low-distortion.jpg\" alt=\"UTG916Plus sine output spectrum showing low spurious content\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eSpectrum of the sine output.\u003c\/span\u003e\n\u003c\/a\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003ePulse and fast edges\u003c\/h3\u003e\n\u003cp\u003ePulse output runs to 40 MHz with a minimum width of 8 ns (typical), width adjustable in 100 ps steps and rise and fall times adjustable from 5 ns up to 1,000 s, so the generator can stand in for a dedicated pulse generator.\u003c\/p\u003e\n\u003cp\u003eSquare-wave edges are under 5 ns (typical) with less than 2% overshoot, and jitter is 200 ps above 5 MHz.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-utg916plus-pulse\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UTG900Plus_body_pulse.jpg\" alt=\"UTG916Plus pulse with adjustable edge time on an oscilloscope\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003ePulse edge measured on an oscilloscope.\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-utg916plus-pulse\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UTG900Plus_body_pulse.jpg\" alt=\"UTG916Plus pulse with adjustable edge time on an oscilloscope\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003ePulse edge measured on an oscilloscope.\u003c\/span\u003e\n\u003c\/a\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-utg916plus-prbs\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UTG900Plus_body_prbs.jpg\" alt=\"UTG916Plus PRBS settings screen\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003ePRBS bit rate, pattern and edge-time settings.\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003ch3\u003ePRBS patterns\u003c\/h3\u003e\n\u003cp\u003eFifteen pseudo-random binary sequences from PN3 to PN33 run at bit rates from 1 μbps to 150 Mbps, with edge times adjustable from 5 ns to 1 ks.\u003c\/p\u003e\n\u003cp\u003eThey provide repeatable digital stress patterns for receiver, data-path and line-coding tests, and the same sequences drive the BPSK, QPSK and QAM modulators.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-utg916plus-prbs\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UTG900Plus_body_prbs.jpg\" alt=\"UTG916Plus PRBS settings screen\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003ePRBS bit rate, pattern and edge-time settings.\u003c\/span\u003e\n\u003c\/a\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eNoise superposition and SNR control\u003c\/h3\u003e\n\u003cp\u003eNoise of up to 1 Vrms can be added to sine, square, pulse, ramp, arbitrary and PRBS outputs, and a one-touch SNR setting sets the signal-to-noise ratio directly.\u003c\/p\u003e\n\u003cp\u003eIt is a quick way to check how a receiver, filter or detector behaves as the signal degrades.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-utg916plus-noise\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UTG900Plus_body_noise.jpg\" alt=\"UTG916Plus noise superposition settings and resulting waveform\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eNoise added to a sine (left) and the resulting output (right).\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-utg916plus-noise\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UTG900Plus_body_noise.jpg\" alt=\"UTG916Plus noise superposition settings and resulting waveform\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eNoise added to a sine (left) and the resulting output (right).\u003c\/span\u003e\n\u003c\/a\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-utg916plus-noise-bandwidth\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UTG900Plus_body_noise-bandwidth.jpg\" alt=\"UTG916Plus noise filter settings\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eNoise filter type and cutoff frequency.\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003ch3\u003eAdjustable noise bandwidth\u003c\/h3\u003e\n\u003cp\u003eThe noise source is flat (typical, -3 dB) from 1 mHz to 160 MHz, and its bandwidth can be limited with low-pass, high-pass or band-pass filtering to model a specific noise environment.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-utg916plus-noise-bandwidth\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UTG900Plus_body_noise-bandwidth.jpg\" alt=\"UTG916Plus noise filter settings\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eNoise filter type and cutoff frequency.\u003c\/span\u003e\n\u003c\/a\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003e15 modulation types\u003c\/h3\u003e\n\u003cp\u003eAM, FM, PM, DSB-AM, ASK, FSK, PSK, 3FSK, 4FSK, BPSK, QPSK, OSK, SUM, QAM and PWM cover analog and digital modulation. QAM runs from QAM4 to QAM256, BPSK, QPSK and QAM use PN3 to PN33 symbols at up to 2 Mbps, and the internal modulating source reaches 2 MHz.\u003c\/p\u003e\n\u003cp\u003eAM, FM, PM, SUM and PWM can also take an external modulating signal through the front Aux I\/O connector, and each channel modulates independently.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-utg916plus-modulation\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UTG900Plus_body_modulation.jpg\" alt=\"UTG916Plus BPSK modulation settings\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eBPSK modulation settings.\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-utg916plus-modulation\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UTG900Plus_body_modulation.jpg\" alt=\"UTG916Plus BPSK modulation settings\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eBPSK modulation settings.\u003c\/span\u003e\n\u003c\/a\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-utg916plus-sweep\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UTG900Plus_body_sweep.jpg\" alt=\"UTG916Plus linear sweep settings\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eLinear sweep start, stop and time settings.\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003ch3\u003eFour sweep modes\u003c\/h3\u003e\n\u003cp\u003eLinear, logarithmic, step and list sweeps run from internal, external or manual triggers. Sweep and dwell times run from 1 ms to 500 s, step sweeps take 2 to 2,048 steps, and a list file holds up to 2,048 frequency points.\u003c\/p\u003e\n\u003cp\u003eA trigger output marks each sweep for an oscilloscope or analyzer, which makes frequency-response measurements straightforward.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-utg916plus-sweep\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UTG900Plus_body_sweep.jpg\" alt=\"UTG916Plus linear sweep settings\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eLinear sweep start, stop and time settings.\u003c\/span\u003e\n\u003c\/a\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eThree burst modes\u003c\/h3\u003e\n\u003cp\u003eN-cycle bursts of 1 to 4,294,967,295 cycles, gated bursts and infinite bursts run from internal, external or manual triggers, with start phase set from 0° to 360°.\u003c\/p\u003e\n\u003cp\u003eThe level between bursts can be the default, high, low or a custom value, so the idle state matches the circuit under test.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-utg916plus-burst\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UTG900Plus_body_burst.jpg\" alt=\"UTG916Plus N-cycle burst settings\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eN-cycle burst settings.\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-utg916plus-burst\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UTG900Plus_body_burst.jpg\" alt=\"UTG916Plus N-cycle burst settings\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eN-cycle burst settings.\u003c\/span\u003e\n\u003c\/a\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-utg916plus-expression\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UTG900Plus_body_expression.jpg\" alt=\"UTG916Plus expression waveform settings\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eA sin(x) expression waveform.\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003ch3\u003eHarmonics, multi-pulse and expressions\u003c\/h3\u003e\n\u003cp\u003eThe harmonic function builds a waveform from the 2nd to the 16th harmonic, odd, even, all or custom, with the amplitude and phase of each order set separately, at frequencies up to 80 MHz.\u003c\/p\u003e\n\u003cp\u003eMulti-pulse output generates 2 to 30 pulses with individual widths and gaps from 20 ns, and the expression editor defines a waveform from a formula using functions such as sin, cos, sinc, exp, ln and sqrt.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-utg916plus-expression\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UTG900Plus_body_expression.jpg\" alt=\"UTG916Plus expression waveform settings\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eA sin(x) expression waveform.\u003c\/span\u003e\n\u003c\/a\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eMulti-pulse output\u003c\/h3\u003e\n\u003cp\u003eEach pulse in a multi-pulse train has its own width, gap and edge times, with internal, external or manual triggering and a trigger delay of up to 1 ks.\u003c\/p\u003e\n\u003cp\u003ePulse sequences for double-pulse tests, timing checks and stepper or gate-drive stimulus can be built on the instrument without a separate pattern source.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-utg916plus-multi-pulse\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UTG900Plus_body_multi-pulse.jpg\" alt=\"UTG916Plus multi-pulse settings table\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eMulti-pulse width, gap and edge settings.\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-utg916plus-multi-pulse\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UTG900Plus_body_multi-pulse.jpg\" alt=\"UTG916Plus multi-pulse settings table\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eMulti-pulse width, gap and edge settings.\u003c\/span\u003e\n\u003c\/a\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-utg916plus-channel-merge\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UTG900Plus_body_channel-merge.jpg\" alt=\"UTG916Plus channel merge diagram\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eCH1 and CH2 combined on one output.\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003ch3\u003eChannel merge\u003c\/h3\u003e\n\u003cp\u003eChannel merge adds CH1 and CH2 on one output, for two-tone tests or a signal with an interfering tone. Merge, coupling and channel copy are set from the Utility menu.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-utg916plus-channel-merge\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UTG900Plus_body_channel-merge.jpg\" alt=\"UTG916Plus channel merge diagram\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eCH1 and CH2 combined on one output.\u003c\/span\u003e\n\u003c\/a\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003e600 MHz frequency counter\u003c\/h3\u003e\n\u003cp\u003eThe built-in hardware counter measures external signals from 100 mHz to 600 MHz on a 14-digit display, with AC or DC coupling and a 50 Ω or 1 MΩ input. It shows frequency, period, duty cycle and pulse widths with statistics.\u003c\/p\u003e\n\u003cp\u003eA source frequency can be checked without a separate counter on the bench.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-utg916plus-counter\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UTG900Plus_body_counter.jpg\" alt=\"UTG916Plus frequency counter readings with statistics\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eCounter readings with statistics.\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-utg916plus-counter\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UTG900Plus_body_counter.jpg\" alt=\"UTG916Plus frequency counter readings with statistics\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eCounter readings with statistics.\u003c\/span\u003e\n\u003c\/a\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-utg916plus-arb-editor\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UTG900Plus_body_arb-editor.jpg\" alt=\"UTG916Plus arbitrary waveform on the instrument and in the PC editor\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eArbitrary waveform on the instrument (left) and in the PC editor (right).\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003ch3\u003eArbitrary waveforms and editor\u003c\/h3\u003e\n\u003cp\u003ePoint-by-point arbitrary output plays from 8 points to 128 Mpts per channel, or 256 Mpts per channel loaded from the PC software, at up to 625 MSa\/s, with zero-order-hold or linear-interpolation filtering. DDS mode uses 8 kpts at up to 50 MHz.\u003c\/p\u003e\n\u003cp\u003eOver 200 built-in waveforms are stored in non-volatile memory, and up to 1 GB of .bsv or .csv files can be stored on the instrument or loaded from a USB flash drive. Waveforms can be drawn or edited on the touchscreen or in the PC editor, which connects over USB or LAN.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-utg916plus-arb-editor\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UTG900Plus_body_arb-editor.jpg\" alt=\"UTG916Plus arbitrary waveform on the instrument and in the PC editor\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eArbitrary waveform on the instrument (left) and in the PC editor (right).\u003c\/span\u003e\n\u003c\/a\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eRemote control\u003c\/h3\u003e\n\u003cp\u003eOver USB or LAN the generator takes SCPI commands, works with the UNI-T PC software for control, monitoring and automated tests, and can be operated from a web browser after login.\u003c\/p\u003e\n\u003cp\u003eIt is also compatible with the NeptuneLab laboratory management software.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-utg916plus-remote\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UTG900Plus_body_remote.jpg\" alt=\"UTG916Plus controlled from PC software on a laptop\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eControl from the PC software.\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-utg916plus-remote\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UTG900Plus_body_remote.jpg\" alt=\"UTG916Plus controlled from PC software on a laptop\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eControl from the PC software.\u003c\/span\u003e\n\u003c\/a\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-utg916plus-type-c\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UTG900Plus_body_type-c.jpg\" alt=\"UTG916Plus powered from a USB Type-C power bank\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eUSB Type-C PD power from a power bank (power bank not included).\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003ch3\u003ePortable with USB Type-C power\u003c\/h3\u003e\n\u003cp\u003eAt 282 × 175 × 49 mm and 1.5 kg, the generator moves easily between benches. It is powered over USB Type-C, from the supplied power adapter or from a PD power bank that delivers 12 V at 3 A (power bank not included), and draws less than 25 W.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-utg916plus-type-c\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UTG900Plus_body_type-c.jpg\" alt=\"UTG916Plus powered from a USB Type-C power bank\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eUSB Type-C PD power from a power bank (power bank not included).\u003c\/span\u003e\n\u003c\/a\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eRear-panel connections\u003c\/h3\u003e\n\u003cp\u003eThe rear panel has the LAN and USB Device ports, the USB Type-C power input, 10 MHz reference input and output and a security lock slot, and an HDMI output sits on the side panel. The front panel adds a USB host port for flash drives and the Aux I\/O connector for modulation input, trigger input and output, sync output and the counter input.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-utg916plus-rear-panel\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UTG900Plus_body_rear-panel.jpg\" alt=\"UTG916Plus rear panel connections\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eRear panel I\/O.\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-utg916plus-rear-panel\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UTG900Plus_body_rear-panel.jpg\" alt=\"UTG916Plus rear panel connections\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eRear panel I\/O.\u003c\/span\u003e\n\u003c\/a\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eApplications\u003c\/h2\u003e\n\u003ch3\u003eElectronics teaching labs\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOne instrument covers function, arbitrary, modulation, sweep and burst exercises, with a touchscreen students can follow.\u003c\/li\u003e\n\u003cli\u003eTwo equal channels support phase, Lissajous and differential exercises.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eEmbedded and digital design\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eGenerate clocks, PRBS patterns at up to 150 Mbps and multi-pulse trains with edges from 5 ns.\u003c\/li\u003e\n\u003cli\u003eUse the trigger output and burst modes to drive timing and reset tests.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCommunications and RF development\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eGenerate ASK, FSK, PSK, BPSK, QPSK and QAM signals for receiver and demodulator work.\u003c\/li\u003e\n\u003cli\u003eAdd noise with a set SNR to check sensitivity and error performance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAnalog, power and sensor testing\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eInject ripple or small signals on a DC offset and sweep frequency response with a marker output.\u003c\/li\u003e\n\u003cli\u003eRecreate captured sensor signals from arbitrary files of up to 128 Mpts per channel.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eIn the Box\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eUSB Type-C power adapter (12 V, 3 A)\u003c\/li\u003e\n\u003cli\u003eUSB data cable (UT-D14)\u003c\/li\u003e\n\u003cli\u003eBNC-to-BNC cable (UT-L45)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eInstrument dimensions 282 × 175 × 49 mm (W × H × D), 1.5 kg.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat is the difference between the four UTG900Plus models?\u003c\/h3\u003e\n\u003cp\u003eMaximum output frequency: the UTG920Plus (200 MHz), UTG916Plus (160 MHz), UTG912Plus (120 MHz) and UTG908Plus (80 MHz). Square and pulse reach 50, 40, 30 and 20 MHz respectively. All four share the 16-bit, 1.25 GSa\/s architecture, 128 Mpts per channel of arbitrary memory, 15 modulation types, the 600 MHz counter and the 7-inch touchscreen.\u003c\/p\u003e\n\u003ch3\u003eIs 1.25 GSa\/s the native sample rate?\u003c\/h3\u003e\n\u003cp\u003e1.25 GSa\/s is reached with 2× interpolation. Point-by-point arbitrary waveforms play at up to 625 MSa\/s.\u003c\/p\u003e\n\u003ch3\u003eCan it run without mains power?\u003c\/h3\u003e\n\u003cp\u003eYes. The generator is powered over USB Type-C, so besides the supplied adapter it runs from a PD power bank that provides 12 V at 3 A. A power bank is not included.\u003c\/p\u003e\n\u003ch3\u003eHow is the UTG900Plus different from the UTG2000X?\u003c\/h3\u003e\n\u003cp\u003eBoth are two-channel, 16-bit generators with 1.25 GSa\/s sampling using 2× interpolation and the same modulation set. The UTG900Plus reaches up to 200 MHz instead of 120 MHz, holds 128 Mpts per channel instead of 32 Mpts, and has a 7-inch 1024 × 600 touchscreen instead of 4.3 inches, in a 1.5 kg chassis with USB Type-C power.\u003c\/p\u003e\n\u003ch3\u003eWhat warranty applies?\u003c\/h3\u003e\n\u003cp\u003eThree years standard, plus two more years when you register the instrument for free.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"UNI-T","offers":[{"title":"Default Title","offer_id":54925302661404,"sku":"181300100166X","price":999.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UNI-T_UTG900Plus_1_sq_44b56118-57c3-4aef-b260-5fccfcaee7f9.jpg?v=1794861551"},{"product_id":"utg912plus","title":"UTG912Plus 120 MHz 2Ch Function\/Arbitrary Waveform Generator","description":"\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThe UTG912Plus puts 120 MHz sine and 30 MHz square output on two equal-performance channels, with 16-bit resolution, 1.25 GSa\/s sampling (2× interpolation), up to 128 Mpts of arbitrary memory per channel and a 7-inch 1024 × 600 touchscreen.\u003c\/p\u003e\n\u003cp\u003eEach channel produces sine to 120 MHz, square and pulse to 30 MHz and ramp to 5 MHz with 1 μHz resolution, and noise, harmonics (2nd to 16th), PRBS, DC, arbitrary, multi-pulse and expression waveforms. Output reaches 20 Vpp into high impedance at up to 40 MHz, typical phase noise is ≤-130 dBc\/Hz (10 MHz, 10 kHz offset) and THD is below 0.07% from DC to 20 kHz.\u003c\/p\u003e\n\u003cp\u003eFifteen modulation types, four sweep modes and three burst modes are built in, along with a 600 MHz hardware frequency counter, channel coupling and merging, 10 MHz reference in and out, LAN, USB host and device, HDMI and SCPI control. The 1.5 kg chassis is powered over USB Type-C, from the supplied adapter or a PD power bank. Backed by the 3+2 warranty: three years standard, plus two more years when you register the instrument for free.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cdiv class=\"product-key-features\"\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e120 MHz sine, 30 MHz square and pulse\u003c\/strong\u003e — two equal-performance, independent channels with 1 μHz frequency resolution.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e16-bit, 1.25 GSa\/s\u003c\/strong\u003e — 2× interpolation; point-by-point arbitrary output up to 625 MSa\/s.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUp to 128 Mpts arbitrary memory per channel\u003c\/strong\u003e — 256 Mpts per channel through the PC software; DDS mode at 8 kpts; over 200 built-in waveforms; 1 GB of file storage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow-distortion output\u003c\/strong\u003e — THD below 0.07% (DC to 20 kHz), phase noise ≤-130 dBc\/Hz typical at 10 MHz, 10 kHz offset.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUp to 20 Vpp\u003c\/strong\u003e into high impedance (≤40 MHz), 10 Vpp at 120 MHz; ±10 V DC offset into high impedance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFast pulse\u003c\/strong\u003e — edges adjustable from 5 ns, 8 ns minimum width with 100 ps steps, 150 ps jitter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e15 modulation types\u003c\/strong\u003e — AM, FM, PM, DSB-AM, ASK, FSK, PSK, 3FSK, 4FSK, BPSK, QPSK, OSK, SUM, QAM and PWM.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSweep, burst, PRBS, harmonics, multi-pulse and expressions\u003c\/strong\u003e — linear, logarithmic, step and list sweep; N-cycle, gated and infinite burst; PN3 to PN33 at up to 150 Mbps.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e600 MHz hardware frequency counter\u003c\/strong\u003e — 100 mHz to 600 MHz on a 14-digit display, AC or DC coupling, 50 Ω or 1 MΩ input.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e7-inch 1024 × 600 capacitive touchscreen\u003c\/strong\u003e with keypad, knob and dedicated waveform keys.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnectivity\u003c\/strong\u003e — USB host and device, LAN, HDMI, 10 MHz reference in and out, front Aux I\/O, SCPI, browser control and a PC arbitrary waveform editor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1.5 kg, USB Type-C power\u003c\/strong\u003e — supplied USB Type-C power adapter, or a PD power bank that delivers 12 V \/ 3 A; under 25 W.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eDetailed Features\u003c\/h2\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003e120 MHz, two independent channels\u003c\/h3\u003e\n\u003cp\u003eEach channel of the UTG912Plus runs its own waveform, modulation, sweep or burst at up to 120 MHz sine and 30 MHz square, so two separate tests can run at once or one channel can be the reference for the other.\u003c\/p\u003e\n\u003cp\u003eCoupling ties frequency, amplitude or phase between channels by ratio or offset, and channel merge adds the two signals on one output.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-utg912plus-dual-channel\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UTG900Plus_body_dual-channel.jpg\" alt=\"UTG912Plus two-channel sine output on an oscilloscope\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eTwo synchronized channels on an oscilloscope.\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-utg912plus-dual-channel\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UTG900Plus_body_dual-channel.jpg\" alt=\"UTG912Plus two-channel sine output on an oscilloscope\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eTwo synchronized channels on an oscilloscope.\u003c\/span\u003e\n\u003c\/a\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-utg912plus-low-distortion\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UTG900Plus_body_low-distortion.jpg\" alt=\"UTG912Plus sine output spectrum showing low spurious content\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eSpectrum of the sine output.\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003ch3\u003eLow-distortion sine output\u003c\/h3\u003e\n\u003cp\u003eTHD stays below 0.07% from DC to 20 kHz, and harmonic distortion is specified at ≤-60 dBc to 1 MHz down to ≤-40 dBc at 120 MHz (0 dBm, typical). Typical phase noise is ≤-130 dBc\/Hz at 10 MHz with a 10 kHz offset.\u003c\/p\u003e\n\u003cp\u003eSmall signals can sit on a large DC offset with low added noise, which suits ripple injection and sensor-input tests where the stimulus has to be cleaner than the device under test.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-utg912plus-low-distortion\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UTG900Plus_body_low-distortion.jpg\" alt=\"UTG912Plus sine output spectrum showing low spurious content\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eSpectrum of the sine output.\u003c\/span\u003e\n\u003c\/a\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003ePulse and fast edges\u003c\/h3\u003e\n\u003cp\u003ePulse output runs to 30 MHz with a minimum width of 8 ns (typical), width adjustable in 100 ps steps and rise and fall times adjustable from 5 ns up to 1,000 s, so the generator can stand in for a dedicated pulse generator.\u003c\/p\u003e\n\u003cp\u003eSquare-wave edges are under 5 ns (typical) with less than 2% overshoot, and jitter is 200 ps above 5 MHz.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-utg912plus-pulse\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UTG900Plus_body_pulse.jpg\" alt=\"UTG912Plus pulse with adjustable edge time on an oscilloscope\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003ePulse edge measured on an oscilloscope.\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-utg912plus-pulse\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UTG900Plus_body_pulse.jpg\" alt=\"UTG912Plus pulse with adjustable edge time on an oscilloscope\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003ePulse edge measured on an oscilloscope.\u003c\/span\u003e\n\u003c\/a\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-utg912plus-prbs\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UTG900Plus_body_prbs.jpg\" alt=\"UTG912Plus PRBS settings screen\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003ePRBS bit rate, pattern and edge-time settings.\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003ch3\u003ePRBS patterns\u003c\/h3\u003e\n\u003cp\u003eFifteen pseudo-random binary sequences from PN3 to PN33 run at bit rates from 1 μbps to 150 Mbps, with edge times adjustable from 5 ns to 1 ks.\u003c\/p\u003e\n\u003cp\u003eThey provide repeatable digital stress patterns for receiver, data-path and line-coding tests, and the same sequences drive the BPSK, QPSK and QAM modulators.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-utg912plus-prbs\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UTG900Plus_body_prbs.jpg\" alt=\"UTG912Plus PRBS settings screen\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003ePRBS bit rate, pattern and edge-time settings.\u003c\/span\u003e\n\u003c\/a\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eNoise superposition and SNR control\u003c\/h3\u003e\n\u003cp\u003eNoise of up to 1 Vrms can be added to sine, square, pulse, ramp, arbitrary and PRBS outputs, and a one-touch SNR setting sets the signal-to-noise ratio directly.\u003c\/p\u003e\n\u003cp\u003eIt is a quick way to check how a receiver, filter or detector behaves as the signal degrades.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-utg912plus-noise\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UTG900Plus_body_noise.jpg\" alt=\"UTG912Plus noise superposition settings and resulting waveform\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eNoise added to a sine (left) and the resulting output (right).\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-utg912plus-noise\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UTG900Plus_body_noise.jpg\" alt=\"UTG912Plus noise superposition settings and resulting waveform\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eNoise added to a sine (left) and the resulting output (right).\u003c\/span\u003e\n\u003c\/a\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-utg912plus-noise-bandwidth\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UTG900Plus_body_noise-bandwidth.jpg\" alt=\"UTG912Plus noise filter settings\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eNoise filter type and cutoff frequency.\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003ch3\u003eAdjustable noise bandwidth\u003c\/h3\u003e\n\u003cp\u003eThe noise source is flat (typical, -3 dB) from 1 mHz to 120 MHz, and its bandwidth can be limited with low-pass, high-pass or band-pass filtering to model a specific noise environment.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-utg912plus-noise-bandwidth\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UTG900Plus_body_noise-bandwidth.jpg\" alt=\"UTG912Plus noise filter settings\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eNoise filter type and cutoff frequency.\u003c\/span\u003e\n\u003c\/a\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003e15 modulation types\u003c\/h3\u003e\n\u003cp\u003eAM, FM, PM, DSB-AM, ASK, FSK, PSK, 3FSK, 4FSK, BPSK, QPSK, OSK, SUM, QAM and PWM cover analog and digital modulation. QAM runs from QAM4 to QAM256, BPSK, QPSK and QAM use PN3 to PN33 symbols at up to 2 Mbps, and the internal modulating source reaches 2 MHz.\u003c\/p\u003e\n\u003cp\u003eAM, FM, PM, SUM and PWM can also take an external modulating signal through the front Aux I\/O connector, and each channel modulates independently.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-utg912plus-modulation\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UTG900Plus_body_modulation.jpg\" alt=\"UTG912Plus BPSK modulation settings\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eBPSK modulation settings.\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-utg912plus-modulation\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UTG900Plus_body_modulation.jpg\" alt=\"UTG912Plus BPSK modulation settings\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eBPSK modulation settings.\u003c\/span\u003e\n\u003c\/a\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-utg912plus-sweep\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UTG900Plus_body_sweep.jpg\" alt=\"UTG912Plus linear sweep settings\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eLinear sweep start, stop and time settings.\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003ch3\u003eFour sweep modes\u003c\/h3\u003e\n\u003cp\u003eLinear, logarithmic, step and list sweeps run from internal, external or manual triggers. Sweep and dwell times run from 1 ms to 500 s, step sweeps take 2 to 2,048 steps, and a list file holds up to 2,048 frequency points.\u003c\/p\u003e\n\u003cp\u003eA trigger output marks each sweep for an oscilloscope or analyzer, which makes frequency-response measurements straightforward.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-utg912plus-sweep\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UTG900Plus_body_sweep.jpg\" alt=\"UTG912Plus linear sweep settings\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eLinear sweep start, stop and time settings.\u003c\/span\u003e\n\u003c\/a\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eThree burst modes\u003c\/h3\u003e\n\u003cp\u003eN-cycle bursts of 1 to 4,294,967,295 cycles, gated bursts and infinite bursts run from internal, external or manual triggers, with start phase set from 0° to 360°.\u003c\/p\u003e\n\u003cp\u003eThe level between bursts can be the default, high, low or a custom value, so the idle state matches the circuit under test.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-utg912plus-burst\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UTG900Plus_body_burst.jpg\" alt=\"UTG912Plus N-cycle burst settings\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eN-cycle burst settings.\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-utg912plus-burst\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UTG900Plus_body_burst.jpg\" alt=\"UTG912Plus N-cycle burst settings\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eN-cycle burst settings.\u003c\/span\u003e\n\u003c\/a\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-utg912plus-expression\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UTG900Plus_body_expression.jpg\" alt=\"UTG912Plus expression waveform settings\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eA sin(x) expression waveform.\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003ch3\u003eHarmonics, multi-pulse and expressions\u003c\/h3\u003e\n\u003cp\u003eThe harmonic function builds a waveform from the 2nd to the 16th harmonic, odd, even, all or custom, with the amplitude and phase of each order set separately, at frequencies up to 60 MHz.\u003c\/p\u003e\n\u003cp\u003eMulti-pulse output generates 2 to 30 pulses with individual widths and gaps from 20 ns, and the expression editor defines a waveform from a formula using functions such as sin, cos, sinc, exp, ln and sqrt.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-utg912plus-expression\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UTG900Plus_body_expression.jpg\" alt=\"UTG912Plus expression waveform settings\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eA sin(x) expression waveform.\u003c\/span\u003e\n\u003c\/a\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eMulti-pulse output\u003c\/h3\u003e\n\u003cp\u003eEach pulse in a multi-pulse train has its own width, gap and edge times, with internal, external or manual triggering and a trigger delay of up to 1 ks.\u003c\/p\u003e\n\u003cp\u003ePulse sequences for double-pulse tests, timing checks and stepper or gate-drive stimulus can be built on the instrument without a separate pattern source.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-utg912plus-multi-pulse\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UTG900Plus_body_multi-pulse.jpg\" alt=\"UTG912Plus multi-pulse settings table\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eMulti-pulse width, gap and edge settings.\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-utg912plus-multi-pulse\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UTG900Plus_body_multi-pulse.jpg\" alt=\"UTG912Plus multi-pulse settings table\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eMulti-pulse width, gap and edge settings.\u003c\/span\u003e\n\u003c\/a\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-utg912plus-channel-merge\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UTG900Plus_body_channel-merge.jpg\" alt=\"UTG912Plus channel merge diagram\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eCH1 and CH2 combined on one output.\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003ch3\u003eChannel merge\u003c\/h3\u003e\n\u003cp\u003eChannel merge adds CH1 and CH2 on one output, for two-tone tests or a signal with an interfering tone. Merge, coupling and channel copy are set from the Utility menu.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-utg912plus-channel-merge\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UTG900Plus_body_channel-merge.jpg\" alt=\"UTG912Plus channel merge diagram\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eCH1 and CH2 combined on one output.\u003c\/span\u003e\n\u003c\/a\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003e600 MHz frequency counter\u003c\/h3\u003e\n\u003cp\u003eThe built-in hardware counter measures external signals from 100 mHz to 600 MHz on a 14-digit display, with AC or DC coupling and a 50 Ω or 1 MΩ input. It shows frequency, period, duty cycle and pulse widths with statistics.\u003c\/p\u003e\n\u003cp\u003eA source frequency can be checked without a separate counter on the bench.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-utg912plus-counter\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UTG900Plus_body_counter.jpg\" alt=\"UTG912Plus frequency counter readings with statistics\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eCounter readings with statistics.\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-utg912plus-counter\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UTG900Plus_body_counter.jpg\" alt=\"UTG912Plus frequency counter readings with statistics\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eCounter readings with statistics.\u003c\/span\u003e\n\u003c\/a\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-utg912plus-arb-editor\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UTG900Plus_body_arb-editor.jpg\" alt=\"UTG912Plus arbitrary waveform on the instrument and in the PC editor\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eArbitrary waveform on the instrument (left) and in the PC editor (right).\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003ch3\u003eArbitrary waveforms and editor\u003c\/h3\u003e\n\u003cp\u003ePoint-by-point arbitrary output plays from 8 points to 128 Mpts per channel, or 256 Mpts per channel loaded from the PC software, at up to 625 MSa\/s, with zero-order-hold or linear-interpolation filtering. DDS mode uses 8 kpts at up to 50 MHz.\u003c\/p\u003e\n\u003cp\u003eOver 200 built-in waveforms are stored in non-volatile memory, and up to 1 GB of .bsv or .csv files can be stored on the instrument or loaded from a USB flash drive. Waveforms can be drawn or edited on the touchscreen or in the PC editor, which connects over USB or LAN.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-utg912plus-arb-editor\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UTG900Plus_body_arb-editor.jpg\" alt=\"UTG912Plus arbitrary waveform on the instrument and in the PC editor\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eArbitrary waveform on the instrument (left) and in the PC editor (right).\u003c\/span\u003e\n\u003c\/a\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eRemote control\u003c\/h3\u003e\n\u003cp\u003eOver USB or LAN the generator takes SCPI commands, works with the UNI-T PC software for control, monitoring and automated tests, and can be operated from a web browser after login.\u003c\/p\u003e\n\u003cp\u003eIt is also compatible with the NeptuneLab laboratory management software.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-utg912plus-remote\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UTG900Plus_body_remote.jpg\" alt=\"UTG912Plus controlled from PC software on a laptop\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eControl from the PC software.\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-utg912plus-remote\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UTG900Plus_body_remote.jpg\" alt=\"UTG912Plus controlled from PC software on a laptop\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eControl from the PC software.\u003c\/span\u003e\n\u003c\/a\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-utg912plus-type-c\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UTG900Plus_body_type-c.jpg\" alt=\"UTG912Plus powered from a USB Type-C power bank\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eUSB Type-C PD power from a power bank (power bank not included).\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003ch3\u003ePortable with USB Type-C power\u003c\/h3\u003e\n\u003cp\u003eAt 282 × 175 × 49 mm and 1.5 kg, the generator moves easily between benches. It is powered over USB Type-C, from the supplied power adapter or from a PD power bank that delivers 12 V at 3 A (power bank not included), and draws less than 25 W.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-utg912plus-type-c\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UTG900Plus_body_type-c.jpg\" alt=\"UTG912Plus powered from a USB Type-C power bank\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eUSB Type-C PD power from a power bank (power bank not included).\u003c\/span\u003e\n\u003c\/a\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eRear-panel connections\u003c\/h3\u003e\n\u003cp\u003eThe rear panel has the LAN and USB Device ports, the USB Type-C power input, 10 MHz reference input and output and a security lock slot, and an HDMI output sits on the side panel. The front panel adds a USB host port for flash drives and the Aux I\/O connector for modulation input, trigger input and output, sync output and the counter input.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-utg912plus-rear-panel\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UTG900Plus_body_rear-panel.jpg\" alt=\"UTG912Plus rear panel connections\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eRear panel I\/O.\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-utg912plus-rear-panel\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UTG900Plus_body_rear-panel.jpg\" alt=\"UTG912Plus rear panel connections\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eRear panel I\/O.\u003c\/span\u003e\n\u003c\/a\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eApplications\u003c\/h2\u003e\n\u003ch3\u003eElectronics teaching labs\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOne instrument covers function, arbitrary, modulation, sweep and burst exercises, with a touchscreen students can follow.\u003c\/li\u003e\n\u003cli\u003eTwo equal channels support phase, Lissajous and differential exercises.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eEmbedded and digital design\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eGenerate clocks, PRBS patterns at up to 150 Mbps and multi-pulse trains with edges from 5 ns.\u003c\/li\u003e\n\u003cli\u003eUse the trigger output and burst modes to drive timing and reset tests.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCommunications and RF development\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eGenerate ASK, FSK, PSK, BPSK, QPSK and QAM signals for receiver and demodulator work.\u003c\/li\u003e\n\u003cli\u003eAdd noise with a set SNR to check sensitivity and error performance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAnalog, power and sensor testing\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eInject ripple or small signals on a DC offset and sweep frequency response with a marker output.\u003c\/li\u003e\n\u003cli\u003eRecreate captured sensor signals from arbitrary files of up to 128 Mpts per channel.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eIn the Box\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eUSB Type-C power adapter (12 V, 3 A)\u003c\/li\u003e\n\u003cli\u003eUSB data cable (UT-D14)\u003c\/li\u003e\n\u003cli\u003eBNC-to-BNC cable (UT-L45)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eInstrument dimensions 282 × 175 × 49 mm (W × H × D), 1.5 kg.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat is the difference between the four UTG900Plus models?\u003c\/h3\u003e\n\u003cp\u003eMaximum output frequency: the UTG920Plus (200 MHz), UTG916Plus (160 MHz), UTG912Plus (120 MHz) and UTG908Plus (80 MHz). Square and pulse reach 50, 40, 30 and 20 MHz respectively. All four share the 16-bit, 1.25 GSa\/s architecture, 128 Mpts per channel of arbitrary memory, 15 modulation types, the 600 MHz counter and the 7-inch touchscreen.\u003c\/p\u003e\n\u003ch3\u003eIs 1.25 GSa\/s the native sample rate?\u003c\/h3\u003e\n\u003cp\u003e1.25 GSa\/s is reached with 2× interpolation. Point-by-point arbitrary waveforms play at up to 625 MSa\/s.\u003c\/p\u003e\n\u003ch3\u003eCan it run without mains power?\u003c\/h3\u003e\n\u003cp\u003eYes. The generator is powered over USB Type-C, so besides the supplied adapter it runs from a PD power bank that provides 12 V at 3 A. A power bank is not included.\u003c\/p\u003e\n\u003ch3\u003eHow is the UTG900Plus different from the UTG2000X?\u003c\/h3\u003e\n\u003cp\u003eBoth are two-channel, 16-bit generators with 1.25 GSa\/s sampling using 2× interpolation and the same modulation set. The UTG900Plus reaches up to 200 MHz instead of 120 MHz, holds 128 Mpts per channel instead of 32 Mpts, and has a 7-inch 1024 × 600 touchscreen instead of 4.3 inches, in a 1.5 kg chassis with USB Type-C power.\u003c\/p\u003e\n\u003ch3\u003eWhat warranty applies?\u003c\/h3\u003e\n\u003cp\u003eThree years standard, plus two more years when you register the instrument for free.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"UNI-T","offers":[{"title":"Default Title","offer_id":54925302825244,"sku":"181300100168X","price":799.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UNI-T_UTG900Plus_1_sq_259c72ac-df86-4bf0-abf0-e1876495d537.jpg?v=1794861555"},{"product_id":"utg908plus","title":"UTG908Plus 80 MHz 2Ch Function\/Arbitrary Waveform Generator","description":"\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eWith 80 MHz sine output, 20 MHz square and pulse and up to 20 Vpp into high impedance, the UTG908Plus is the entry model of the UTG900Plus Series: a two-channel, 16-bit function\/arbitrary waveform generator with 1.25 GSa\/s sampling (2× interpolation) and up to 128 Mpts of arbitrary memory per channel.\u003c\/p\u003e\n\u003cp\u003eEach channel produces sine to 80 MHz, square and pulse to 20 MHz and ramp to 5 MHz with 1 μHz resolution, and noise, harmonics (2nd to 16th), PRBS, DC, arbitrary, multi-pulse and expression waveforms. Output reaches 20 Vpp into high impedance at up to 40 MHz, typical phase noise is ≤-130 dBc\/Hz (10 MHz, 10 kHz offset) and THD is below 0.07% from DC to 20 kHz.\u003c\/p\u003e\n\u003cp\u003eFifteen modulation types, four sweep modes and three burst modes are built in, along with a 600 MHz hardware frequency counter, channel coupling and merging, 10 MHz reference in and out, LAN, USB host and device, HDMI and SCPI control. The 1.5 kg chassis is powered over USB Type-C, from the supplied adapter or a PD power bank. Backed by the 3+2 warranty: three years standard, plus two more years when you register the instrument for free.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cdiv class=\"product-key-features\"\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e80 MHz sine, 20 MHz square and pulse\u003c\/strong\u003e — two equal-performance, independent channels with 1 μHz frequency resolution.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e16-bit, 1.25 GSa\/s\u003c\/strong\u003e — 2× interpolation; point-by-point arbitrary output up to 625 MSa\/s.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUp to 128 Mpts arbitrary memory per channel\u003c\/strong\u003e — 256 Mpts per channel through the PC software; DDS mode at 8 kpts; over 200 built-in waveforms; 1 GB of file storage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow-distortion output\u003c\/strong\u003e — THD below 0.07% (DC to 20 kHz), phase noise ≤-130 dBc\/Hz typical at 10 MHz, 10 kHz offset.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUp to 20 Vpp\u003c\/strong\u003e into high impedance (≤40 MHz), 15 Vpp at 80 MHz; ±10 V DC offset into high impedance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFast pulse\u003c\/strong\u003e — edges adjustable from 5 ns, 8 ns minimum width with 100 ps steps, 150 ps jitter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e15 modulation types\u003c\/strong\u003e — AM, FM, PM, DSB-AM, ASK, FSK, PSK, 3FSK, 4FSK, BPSK, QPSK, OSK, SUM, QAM and PWM.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSweep, burst, PRBS, harmonics, multi-pulse and expressions\u003c\/strong\u003e — linear, logarithmic, step and list sweep; N-cycle, gated and infinite burst; PN3 to PN33 at up to 150 Mbps.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e600 MHz hardware frequency counter\u003c\/strong\u003e — 100 mHz to 600 MHz on a 14-digit display, AC or DC coupling, 50 Ω or 1 MΩ input.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e7-inch 1024 × 600 capacitive touchscreen\u003c\/strong\u003e with keypad, knob and dedicated waveform keys.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnectivity\u003c\/strong\u003e — USB host and device, LAN, HDMI, 10 MHz reference in and out, front Aux I\/O, SCPI, browser control and a PC arbitrary waveform editor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1.5 kg, USB Type-C power\u003c\/strong\u003e — supplied USB Type-C power adapter, or a PD power bank that delivers 12 V \/ 3 A; under 25 W.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eDetailed Features\u003c\/h2\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003e80 MHz with up to 15 Vpp\u003c\/h3\u003e\n\u003cp\u003eAt its 80 MHz top frequency the UTG908Plus still delivers up to 15 Vpp into high impedance, and up to 20 Vpp at 40 MHz and below, on both channels at the same specification.\u003c\/p\u003e\n\u003cp\u003eCoupling ties frequency, amplitude or phase between the channels by ratio or offset, and channel merge combines the two signals on one output.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-utg908plus-dual-channel\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UTG900Plus_body_dual-channel.jpg\" alt=\"UTG908Plus two-channel sine output on an oscilloscope\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eTwo synchronized channels on an oscilloscope.\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-utg908plus-dual-channel\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UTG900Plus_body_dual-channel.jpg\" alt=\"UTG908Plus two-channel sine output on an oscilloscope\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eTwo synchronized channels on an oscilloscope.\u003c\/span\u003e\n\u003c\/a\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-utg908plus-low-distortion\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UTG900Plus_body_low-distortion.jpg\" alt=\"UTG908Plus sine output spectrum showing low spurious content\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eSpectrum of the sine output.\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003ch3\u003eLow-distortion sine output\u003c\/h3\u003e\n\u003cp\u003eTHD stays below 0.07% from DC to 20 kHz, and harmonic distortion is specified at ≤-60 dBc to 1 MHz down to ≤-45 dBc at 80 MHz (0 dBm, typical). Typical phase noise is ≤-130 dBc\/Hz at 10 MHz with a 10 kHz offset.\u003c\/p\u003e\n\u003cp\u003eSmall signals can sit on a large DC offset with low added noise, which suits ripple injection and sensor-input tests where the stimulus has to be cleaner than the device under test.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-utg908plus-low-distortion\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UTG900Plus_body_low-distortion.jpg\" alt=\"UTG908Plus sine output spectrum showing low spurious content\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eSpectrum of the sine output.\u003c\/span\u003e\n\u003c\/a\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003ePulse and fast edges\u003c\/h3\u003e\n\u003cp\u003ePulse output runs to 20 MHz with a minimum width of 8 ns (typical), width adjustable in 100 ps steps and rise and fall times adjustable from 5 ns up to 1,000 s, so the generator can stand in for a dedicated pulse generator.\u003c\/p\u003e\n\u003cp\u003eSquare-wave edges are under 5 ns (typical) with less than 2% overshoot, and jitter is 200 ps above 5 MHz.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-utg908plus-pulse\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UTG900Plus_body_pulse.jpg\" alt=\"UTG908Plus pulse with adjustable edge time on an oscilloscope\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003ePulse edge measured on an oscilloscope.\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-utg908plus-pulse\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UTG900Plus_body_pulse.jpg\" alt=\"UTG908Plus pulse with adjustable edge time on an oscilloscope\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003ePulse edge measured on an oscilloscope.\u003c\/span\u003e\n\u003c\/a\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-utg908plus-prbs\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UTG900Plus_body_prbs.jpg\" alt=\"UTG908Plus PRBS settings screen\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003ePRBS bit rate, pattern and edge-time settings.\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003ch3\u003ePRBS patterns\u003c\/h3\u003e\n\u003cp\u003eFifteen pseudo-random binary sequences from PN3 to PN33 run at bit rates from 1 μbps to 150 Mbps, with edge times adjustable from 5 ns to 1 ks.\u003c\/p\u003e\n\u003cp\u003eThey provide repeatable digital stress patterns for receiver, data-path and line-coding tests, and the same sequences drive the BPSK, QPSK and QAM modulators.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-utg908plus-prbs\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UTG900Plus_body_prbs.jpg\" alt=\"UTG908Plus PRBS settings screen\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003ePRBS bit rate, pattern and edge-time settings.\u003c\/span\u003e\n\u003c\/a\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eNoise superposition and SNR control\u003c\/h3\u003e\n\u003cp\u003eNoise of up to 1 Vrms can be added to sine, square, pulse, ramp, arbitrary and PRBS outputs, and a one-touch SNR setting sets the signal-to-noise ratio directly.\u003c\/p\u003e\n\u003cp\u003eIt is a quick way to check how a receiver, filter or detector behaves as the signal degrades.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-utg908plus-noise\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UTG900Plus_body_noise.jpg\" alt=\"UTG908Plus noise superposition settings and resulting waveform\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eNoise added to a sine (left) and the resulting output (right).\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-utg908plus-noise\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UTG900Plus_body_noise.jpg\" alt=\"UTG908Plus noise superposition settings and resulting waveform\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eNoise added to a sine (left) and the resulting output (right).\u003c\/span\u003e\n\u003c\/a\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-utg908plus-noise-bandwidth\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UTG900Plus_body_noise-bandwidth.jpg\" alt=\"UTG908Plus noise filter settings\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eNoise filter type and cutoff frequency.\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003ch3\u003eAdjustable noise bandwidth\u003c\/h3\u003e\n\u003cp\u003eThe noise source is flat (typical, -3 dB) from 1 mHz to 80 MHz, and its bandwidth can be limited with low-pass, high-pass or band-pass filtering to model a specific noise environment.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-utg908plus-noise-bandwidth\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UTG900Plus_body_noise-bandwidth.jpg\" alt=\"UTG908Plus noise filter settings\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eNoise filter type and cutoff frequency.\u003c\/span\u003e\n\u003c\/a\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003e15 modulation types\u003c\/h3\u003e\n\u003cp\u003eAM, FM, PM, DSB-AM, ASK, FSK, PSK, 3FSK, 4FSK, BPSK, QPSK, OSK, SUM, QAM and PWM cover analog and digital modulation. QAM runs from QAM4 to QAM256, BPSK, QPSK and QAM use PN3 to PN33 symbols at up to 2 Mbps, and the internal modulating source reaches 2 MHz.\u003c\/p\u003e\n\u003cp\u003eAM, FM, PM, SUM and PWM can also take an external modulating signal through the front Aux I\/O connector, and each channel modulates independently.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-utg908plus-modulation\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UTG900Plus_body_modulation.jpg\" alt=\"UTG908Plus BPSK modulation settings\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eBPSK modulation settings.\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-utg908plus-modulation\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UTG900Plus_body_modulation.jpg\" alt=\"UTG908Plus BPSK modulation settings\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eBPSK modulation settings.\u003c\/span\u003e\n\u003c\/a\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-utg908plus-sweep\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UTG900Plus_body_sweep.jpg\" alt=\"UTG908Plus linear sweep settings\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eLinear sweep start, stop and time settings.\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003ch3\u003eFour sweep modes\u003c\/h3\u003e\n\u003cp\u003eLinear, logarithmic, step and list sweeps run from internal, external or manual triggers. Sweep and dwell times run from 1 ms to 500 s, step sweeps take 2 to 2,048 steps, and a list file holds up to 2,048 frequency points.\u003c\/p\u003e\n\u003cp\u003eA trigger output marks each sweep for an oscilloscope or analyzer, which makes frequency-response measurements straightforward.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-utg908plus-sweep\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UTG900Plus_body_sweep.jpg\" alt=\"UTG908Plus linear sweep settings\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eLinear sweep start, stop and time settings.\u003c\/span\u003e\n\u003c\/a\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eThree burst modes\u003c\/h3\u003e\n\u003cp\u003eN-cycle bursts of 1 to 4,294,967,295 cycles, gated bursts and infinite bursts run from internal, external or manual triggers, with start phase set from 0° to 360°.\u003c\/p\u003e\n\u003cp\u003eThe level between bursts can be the default, high, low or a custom value, so the idle state matches the circuit under test.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-utg908plus-burst\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UTG900Plus_body_burst.jpg\" alt=\"UTG908Plus N-cycle burst settings\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eN-cycle burst settings.\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-utg908plus-burst\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UTG900Plus_body_burst.jpg\" alt=\"UTG908Plus N-cycle burst settings\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eN-cycle burst settings.\u003c\/span\u003e\n\u003c\/a\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-utg908plus-expression\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UTG900Plus_body_expression.jpg\" alt=\"UTG908Plus expression waveform settings\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eA sin(x) expression waveform.\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003ch3\u003eHarmonics, multi-pulse and expressions\u003c\/h3\u003e\n\u003cp\u003eThe harmonic function builds a waveform from the 2nd to the 16th harmonic, odd, even, all or custom, with the amplitude and phase of each order set separately, at frequencies up to 40 MHz.\u003c\/p\u003e\n\u003cp\u003eMulti-pulse output generates 2 to 30 pulses with individual widths and gaps from 20 ns, and the expression editor defines a waveform from a formula using functions such as sin, cos, sinc, exp, ln and sqrt.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-utg908plus-expression\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UTG900Plus_body_expression.jpg\" alt=\"UTG908Plus expression waveform settings\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eA sin(x) expression waveform.\u003c\/span\u003e\n\u003c\/a\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eMulti-pulse output\u003c\/h3\u003e\n\u003cp\u003eEach pulse in a multi-pulse train has its own width, gap and edge times, with internal, external or manual triggering and a trigger delay of up to 1 ks.\u003c\/p\u003e\n\u003cp\u003ePulse sequences for double-pulse tests, timing checks and stepper or gate-drive stimulus can be built on the instrument without a separate pattern source.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-utg908plus-multi-pulse\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UTG900Plus_body_multi-pulse.jpg\" alt=\"UTG908Plus multi-pulse settings table\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eMulti-pulse width, gap and edge settings.\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-utg908plus-multi-pulse\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UTG900Plus_body_multi-pulse.jpg\" alt=\"UTG908Plus multi-pulse settings table\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eMulti-pulse width, gap and edge settings.\u003c\/span\u003e\n\u003c\/a\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-utg908plus-channel-merge\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UTG900Plus_body_channel-merge.jpg\" alt=\"UTG908Plus channel merge diagram\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eCH1 and CH2 combined on one output.\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003ch3\u003eChannel merge\u003c\/h3\u003e\n\u003cp\u003eChannel merge adds CH1 and CH2 on one output, for two-tone tests or a signal with an interfering tone. Merge, coupling and channel copy are set from the Utility menu.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-utg908plus-channel-merge\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UTG900Plus_body_channel-merge.jpg\" alt=\"UTG908Plus channel merge diagram\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eCH1 and CH2 combined on one output.\u003c\/span\u003e\n\u003c\/a\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003e600 MHz frequency counter\u003c\/h3\u003e\n\u003cp\u003eThe built-in hardware counter measures external signals from 100 mHz to 600 MHz on a 14-digit display, with AC or DC coupling and a 50 Ω or 1 MΩ input. It shows frequency, period, duty cycle and pulse widths with statistics.\u003c\/p\u003e\n\u003cp\u003eA source frequency can be checked without a separate counter on the bench.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-utg908plus-counter\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UTG900Plus_body_counter.jpg\" alt=\"UTG908Plus frequency counter readings with statistics\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eCounter readings with statistics.\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-utg908plus-counter\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UTG900Plus_body_counter.jpg\" alt=\"UTG908Plus frequency counter readings with statistics\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eCounter readings with statistics.\u003c\/span\u003e\n\u003c\/a\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-utg908plus-arb-editor\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UTG900Plus_body_arb-editor.jpg\" alt=\"UTG908Plus arbitrary waveform on the instrument and in the PC editor\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eArbitrary waveform on the instrument (left) and in the PC editor (right).\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003ch3\u003eArbitrary waveforms and editor\u003c\/h3\u003e\n\u003cp\u003ePoint-by-point arbitrary output plays from 8 points to 128 Mpts per channel, or 256 Mpts per channel loaded from the PC software, at up to 625 MSa\/s, with zero-order-hold or linear-interpolation filtering. DDS mode uses 8 kpts at up to 50 MHz.\u003c\/p\u003e\n\u003cp\u003eOver 200 built-in waveforms are stored in non-volatile memory, and up to 1 GB of .bsv or .csv files can be stored on the instrument or loaded from a USB flash drive. Waveforms can be drawn or edited on the touchscreen or in the PC editor, which connects over USB or LAN.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-utg908plus-arb-editor\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UTG900Plus_body_arb-editor.jpg\" alt=\"UTG908Plus arbitrary waveform on the instrument and in the PC editor\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eArbitrary waveform on the instrument (left) and in the PC editor (right).\u003c\/span\u003e\n\u003c\/a\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eRemote control\u003c\/h3\u003e\n\u003cp\u003eOver USB or LAN the generator takes SCPI commands, works with the UNI-T PC software for control, monitoring and automated tests, and can be operated from a web browser after login.\u003c\/p\u003e\n\u003cp\u003eIt is also compatible with the NeptuneLab laboratory management software.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-utg908plus-remote\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UTG900Plus_body_remote.jpg\" alt=\"UTG908Plus controlled from PC software on a laptop\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eControl from the PC software.\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-utg908plus-remote\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UTG900Plus_body_remote.jpg\" alt=\"UTG908Plus controlled from PC software on a laptop\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eControl from the PC software.\u003c\/span\u003e\n\u003c\/a\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-utg908plus-type-c\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UTG900Plus_body_type-c.jpg\" alt=\"UTG908Plus powered from a USB Type-C power bank\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eUSB Type-C PD power from a power bank (power bank not included).\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003ch3\u003ePortable with USB Type-C power\u003c\/h3\u003e\n\u003cp\u003eAt 282 × 175 × 49 mm and 1.5 kg, the generator moves easily between benches. It is powered over USB Type-C, from the supplied power adapter or from a PD power bank that delivers 12 V at 3 A (power bank not included), and draws less than 25 W.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-utg908plus-type-c\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UTG900Plus_body_type-c.jpg\" alt=\"UTG908Plus powered from a USB Type-C power bank\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eUSB Type-C PD power from a power bank (power bank not included).\u003c\/span\u003e\n\u003c\/a\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eRear-panel connections\u003c\/h3\u003e\n\u003cp\u003eThe rear panel has the LAN and USB Device ports, the USB Type-C power input, 10 MHz reference input and output and a security lock slot, and an HDMI output sits on the side panel. The front panel adds a USB host port for flash drives and the Aux I\/O connector for modulation input, trigger input and output, sync output and the counter input.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-utg908plus-rear-panel\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UTG900Plus_body_rear-panel.jpg\" alt=\"UTG908Plus rear panel connections\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eRear panel I\/O.\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-utg908plus-rear-panel\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UTG900Plus_body_rear-panel.jpg\" alt=\"UTG908Plus rear panel connections\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eRear panel I\/O.\u003c\/span\u003e\n\u003c\/a\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eApplications\u003c\/h2\u003e\n\u003ch3\u003eElectronics teaching labs\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOne instrument covers function, arbitrary, modulation, sweep and burst exercises, with a touchscreen students can follow.\u003c\/li\u003e\n\u003cli\u003eTwo equal channels support phase, Lissajous and differential exercises.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eEmbedded and digital design\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eGenerate clocks, PRBS patterns at up to 150 Mbps and multi-pulse trains with edges from 5 ns.\u003c\/li\u003e\n\u003cli\u003eUse the trigger output and burst modes to drive timing and reset tests.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCommunications and RF development\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eGenerate ASK, FSK, PSK, BPSK, QPSK and QAM signals for receiver and demodulator work.\u003c\/li\u003e\n\u003cli\u003eAdd noise with a set SNR to check sensitivity and error performance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAnalog, power and sensor testing\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eInject ripple or small signals on a DC offset and sweep frequency response with a marker output.\u003c\/li\u003e\n\u003cli\u003eRecreate captured sensor signals from arbitrary files of up to 128 Mpts per channel.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eIn the Box\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eUSB Type-C power adapter (12 V, 3 A)\u003c\/li\u003e\n\u003cli\u003eUSB data cable (UT-D14)\u003c\/li\u003e\n\u003cli\u003eBNC-to-BNC cable (UT-L45)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eInstrument dimensions 282 × 175 × 49 mm (W × H × D), 1.5 kg.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat is the difference between the four UTG900Plus models?\u003c\/h3\u003e\n\u003cp\u003eMaximum output frequency: the UTG920Plus (200 MHz), UTG916Plus (160 MHz), UTG912Plus (120 MHz) and UTG908Plus (80 MHz). Square and pulse reach 50, 40, 30 and 20 MHz respectively. All four share the 16-bit, 1.25 GSa\/s architecture, 128 Mpts per channel of arbitrary memory, 15 modulation types, the 600 MHz counter and the 7-inch touchscreen.\u003c\/p\u003e\n\u003ch3\u003eIs 1.25 GSa\/s the native sample rate?\u003c\/h3\u003e\n\u003cp\u003e1.25 GSa\/s is reached with 2× interpolation. Point-by-point arbitrary waveforms play at up to 625 MSa\/s.\u003c\/p\u003e\n\u003ch3\u003eCan it run without mains power?\u003c\/h3\u003e\n\u003cp\u003eYes. The generator is powered over USB Type-C, so besides the supplied adapter it runs from a PD power bank that provides 12 V at 3 A. A power bank is not included.\u003c\/p\u003e\n\u003ch3\u003eHow is the UTG900Plus different from the UTG2000X?\u003c\/h3\u003e\n\u003cp\u003eBoth are two-channel, 16-bit generators with 1.25 GSa\/s sampling using 2× interpolation and the same modulation set. The UTG900Plus reaches up to 200 MHz instead of 120 MHz, holds 128 Mpts per channel instead of 32 Mpts, and has a 7-inch 1024 × 600 touchscreen instead of 4.3 inches, in a 1.5 kg chassis with USB Type-C power.\u003c\/p\u003e\n\u003ch3\u003eWhat warranty applies?\u003c\/h3\u003e\n\u003cp\u003eThree years standard, plus two more years when you register the instrument for free.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"UNI-T","offers":[{"title":"Default Title","offer_id":54925302858012,"sku":"181300100169X","price":699.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UNI-T_UTG900Plus_1_sq_674412c3-a650-4a81-b9a8-9b5a37e58b81.jpg?v=1794861559"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/collections\/UNI-T_UTG900Plus_1_sq.jpg?v=1794863740","url":"https:\/\/uni-trendus.com\/collections\/utg900plus.oembed","provider":"Uni-Trend US","version":"1.0","type":"link"}