{"title":"UNI-T Clearance","description":"","products":[{"product_id":"mso3504e-s","title":"MSO3504E-S 500 MHz 4+16Ch Mixed Signal Oscilloscope with Signal Generator","description":"\u003ch1\u003eMSO3504E-S | 500 MHz 4+16Ch Mixed Signal Oscilloscope with Signal Generator\u003c\/h1\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThe MSO3504E is a 500 MHz mixed signal oscilloscope with 4 analog channels and 16 digital channels (logic analyzer included). It samples at 2.5 GSa\/s with 250 Mpts memory depth and captures waveforms at up to 200,000 wfms\/s on an 8-inch capacitive touchscreen. A built-in 50 MHz arbitrary waveform generator provides stimulus signals for closed-loop testing without external equipment. All MSO\/UPO3000E-series instruments share the same platform — the same sample rate, memory, and measurement engine — with differences only in bandwidth, channel count, and included accessories.\u003c\/p\u003e\n\u003cp\u003eThe oscilloscope provides 36 automated measurements with statistics, advanced triggering (edge, pulse width, slope, video, pattern, and area trigger), Bode plot analysis for power supply loop characterization, and web-based remote control via LAN. Serial bus protocol decoding for RS-232, UART, I²C, SPI, CAN, CAN-FD, LIN, and FlexRay is available as optional software licenses.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-mso3504e-cap\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO3000-Capture.png\" alt=\"MSO3000E high-speed waveform capture\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003e200,000 wfms\/s capture rate reveals infrequent anomalies\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-mso3504e-mem\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO3000-Capture.png\" alt=\"MSO3000E high-speed waveform capture\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003e200,000 wfms\/s capture rate reveals infrequent anomalies\u003c\/span\u003e\n\u003c\/a\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cdiv class=\"product-key-features\"\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e500 MHz Bandwidth, 4 Analog Channels\u003c\/strong\u003e — Four-channel capture at up to 500 MHz for mixed-signal debugging and signal analysis.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2.5 GSa\/s Sample Rate\u003c\/strong\u003e — Captures fast edges and high-frequency content with accurate timing resolution.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e250 Mpts Memory Depth\u003c\/strong\u003e — Deep memory for capturing long signal records without reducing sample rate.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e200,000 wfms\/s Capture Rate\u003c\/strong\u003e — Fast acquisition reveals infrequent glitches, runts, and timing violations that slower scopes miss.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e16 Digital Channels (Logic Analyzer Included)\u003c\/strong\u003e — Mixed-signal debugging with time-correlated analog and digital views. Logic probe pod included.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt-In 50 MHz Signal Generator\u003c\/strong\u003e — Arbitrary waveform generator output for stimulus-response testing without external equipment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e36 Automated Measurements\u003c\/strong\u003e — Time, voltage, frequency, and statistical measurements with min\/max\/average\/standard deviation tracking.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eArea Trigger\u003c\/strong\u003e — Draw a region on screen and trigger when a waveform enters or exits it — effective for isolating anomalies in complex signals.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBode Plot Analysis\u003c\/strong\u003e — Automated frequency response measurement for characterizing power supply control loops and filter circuits.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e8-Inch Capacitive Touchscreen\u003c\/strong\u003e — Pinch, zoom, drag, and gesture navigation for efficient waveform interaction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeb Remote Control\u003c\/strong\u003e — Access the oscilloscope interface from any browser on the LAN — no software installation required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnectivity\u003c\/strong\u003e — USB, LAN, VGA, EXT trigger, AUX output.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eDeep Memory for Complete Signal Capture\u003c\/h3\u003e\n\u003cp\u003eWith 250 Mpts of memory depth, the oscilloscope maintains its full 2.5 GSa\/s sample rate across wide time base settings. This means you can capture an entire communication sequence, a full power-on cycle, or a long servo motor control loop without aliasing or missing events. Zoom into any portion of the captured record to examine details at full resolution.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-mso3504e-cap\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO3000-Capture.png\" alt=\"MSO3000E high-speed waveform capture\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003e200,000 wfms\/s capture rate reveals infrequent anomalies\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-mso3504e-cap\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO3000-Capture.png\" alt=\"MSO3000E high-speed waveform capture\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003e200,000 wfms\/s capture rate reveals infrequent anomalies\u003c\/span\u003e\n\u003c\/a\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-mso3504e-awg\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO3000-AWG.png\" alt=\"MSO3000E built-in signal generator output\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eBuilt-in arbitrary waveform generator for stimulus-response testing\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003ch3\u003eBuilt-In Signal Generator\u003c\/h3\u003e\n\u003cp\u003eThe 50 MHz arbitrary waveform generator outputs sine, square, ramp, pulse, noise, and user-defined arbitrary waveforms directly from the oscilloscope. Use it to inject test signals into a circuit and capture the response on the scope channels simultaneously — ideal for characterizing filters, amplifiers, and feedback loops without a separate signal generator on the bench.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-mso3504e-awg\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO3000-AWG.png\" alt=\"MSO3000E built-in signal generator output\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eBuilt-in arbitrary waveform generator for stimulus-response testing\u003c\/span\u003e\n\u003c\/a\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eBode Plot for Loop Analysis\u003c\/h3\u003e\n\u003cp\u003eThe Bode plot function sweeps the built-in signal generator across a frequency range while measuring gain and phase on the oscilloscope input. The result is a frequency response plot displayed directly on screen — essential for characterizing power supply feedback loops, verifying filter rolloff, and measuring amplifier bandwidth. Requires the -S model or external signal source.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-mso3504e-bode\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO3000-Bode.png\" alt=\"MSO3000E Bode plot frequency response analysis\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eBode plot analysis for power supply loop characterization\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-mso3504e-bode\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO3000-Bode.png\" alt=\"MSO3000E Bode plot frequency response analysis\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eBode plot analysis for power supply loop characterization\u003c\/span\u003e\n\u003c\/a\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eMixed-Signal Debugging\u003c\/h3\u003e\n\u003cp\u003eThe 16 digital channels display alongside analog traces with full time correlation, letting you see bus activity and analog behavior on the same time axis. This is critical for debugging embedded systems where a software command on I²C triggers an analog response — you need to see both to understand the system. The logic probe pod is included with all MSO models.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-mso3504e-la\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO3000-LAScreen.png\" alt=\"MSO3000E logic analyzer display with 16 digital channels\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003e16-channel logic analyzer view correlated with analog traces\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-mso3504e-la\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO3000-LAScreen.png\" alt=\"MSO3000E logic analyzer display with 16 digital channels\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003e16-channel logic analyzer view correlated with analog traces\u003c\/span\u003e\n\u003c\/a\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-mso3504e-trig\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO3000-AreaTrigger.png\" alt=\"MSO3000E area trigger function\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eArea trigger for isolating anomalies in complex signals\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003ch3\u003eAdvanced Triggering and Area Trigger\u003c\/h3\u003e\n\u003cp\u003eBeyond standard edge triggering, the MSO\/UPO3000E supports pulse width, slope, video, pattern, and timeout triggers for isolating specific signal conditions. The area trigger lets you draw a box on screen and trigger when a waveform enters or exits it — particularly effective for catching anomalies in signals where you know what the waveform should look like but not exactly when the fault will occur.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-mso3504e-trig\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO3000-AreaTrigger.png\" alt=\"MSO3000E area trigger function\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eArea trigger for isolating anomalies in complex signals\u003c\/span\u003e\n\u003c\/a\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eWeb-Based Remote Control\u003c\/h3\u003e\n\u003cp\u003eConnect the oscilloscope to your LAN and access the full interface from any web browser — no dedicated software installation required. Adjust settings, view waveforms, capture screenshots, and transfer data remotely. This is useful for rack-mounted test setups, shared lab instruments, or situations where the oscilloscope is physically difficult to access.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-mso3504e-web\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO3000-webcontrol.png\" alt=\"MSO3000E web-based remote control interface\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eWeb-based remote control from any browser on the LAN\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-mso3504e-web\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO3000-webcontrol.png\" alt=\"MSO3000E web-based remote control interface\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eWeb-based remote control from any browser on the LAN\u003c\/span\u003e\n\u003c\/a\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eApplications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEmbedded Systems Development\u003c\/strong\u003e — Debug microcontroller firmware with time-correlated analog and digital views. Decode SPI, I²C, UART, and CAN bus traffic alongside power rails and clock signals.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Electronics\u003c\/strong\u003e — Capture switching waveforms with deep memory, characterize control loop stability with Bode plot analysis, and trigger on specific voltage or timing conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-Channel Signal Analysis\u003c\/strong\u003e — Four analog channels for simultaneous capture of input, output, reference, and feedback signals in complex circuits.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEducation and Training\u003c\/strong\u003e — The touchscreen interface and automated measurements lower the barrier for students learning oscilloscope operation, while the advanced features support upper-level lab coursework.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturing and Quality\u003c\/strong\u003e — Automated measurements with pass\/fail limits, web remote control for rack-mounted setups, and data export for test documentation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eAre serial bus protocol decodes included?\u003c\/p\u003e\n\u003cp\u003eNo. Protocol decoding for RS-232, UART, I²C, SPI, CAN, CAN-FD, LIN, and FlexRay is available as optional software licenses. See the \u003ca href=\"\/collections\/mso3000e\"\u003eMSO\/UPO3000E series page\u003c\/a\u003e for available decode options.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eWhat waveforms can the built-in signal generator produce?\u003c\/p\u003e\n\u003cp\u003eThe -S models include a 50 MHz arbitrary waveform generator that outputs sine, square, ramp, pulse, noise, DC, and user-defined arbitrary waveforms. It also enables the Bode plot function for automated frequency response measurement.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eWhat is the difference between MSO and UPO models?\u003c\/p\u003e\n\u003cp\u003eMSO models include the 16-channel logic probe pod in the box. UPO models are the same oscilloscope without the logic pod — you can add it later with the \u003ca href=\"\/products\/ut-m15\"\u003eUT-M15\u003c\/a\u003e and \u003ca href=\"\/products\/upo3000cs-la16\"\u003eLA16 software license\u003c\/a\u003e. All other specifications are identical between MSO and UPO models at the same bandwidth and channel count.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eCan I upgrade the bandwidth later?\u003c\/p\u003e\n\u003cp\u003eNo. The bandwidth is fixed at the factory. Choose the bandwidth you need at purchase — 500 MHz for this model. The 500 MHz and 350 MHz models share the same chassis and feature set.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003cp\u003ePart of the \u003ca href=\"\/collections\/mso3000e\"\u003eMSO\/UPO3000E oscilloscope series\u003c\/a\u003e. All models share the same 2.5 GSa\/s sample rate, 250 Mpts memory, and measurement engine. See the \u003ca href=\"\/collections\/mso3000e\"\u003eseries comparison table\u003c\/a\u003e to find the right combination of bandwidth, channels, and accessories for your application.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"UNI-T","offers":[{"title":"Default Title","offer_id":46997470282012,"sku":"181100300035X","price":2687.2,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/MSO3504E-S_Probes.jpg?v=1720807117"},{"product_id":"mso3354e-s","title":"MSO3354E-S 350 MHz 4+16Ch Mixed Signal Oscilloscope with Signal Generator","description":"\u003ch1\u003eMSO3354E-S | 350 MHz 4+16Ch Mixed Signal Oscilloscope with Signal Generator\u003c\/h1\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThe MSO3354E is a 350 MHz mixed signal oscilloscope with 4 analog channels and 16 digital channels (logic analyzer included). It samples at 2.5 GSa\/s with 250 Mpts memory depth and captures waveforms at up to 200,000 wfms\/s on an 8-inch capacitive touchscreen. A built-in 50 MHz arbitrary waveform generator provides stimulus signals for closed-loop testing without external equipment. All MSO\/UPO3000E-series instruments share the same platform — the same sample rate, memory, and measurement engine — with differences only in bandwidth, channel count, and included accessories.\u003c\/p\u003e\n\u003cp\u003eThe oscilloscope provides 36 automated measurements with statistics, advanced triggering (edge, pulse width, slope, video, pattern, and area trigger), Bode plot analysis for power supply loop characterization, and web-based remote control via LAN. Serial bus protocol decoding for RS-232, UART, I²C, SPI, CAN, CAN-FD, LIN, and FlexRay is available as optional software licenses.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-mso3354e-cap\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO3000-Capture.png\" alt=\"MSO3000E high-speed waveform capture\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003e200,000 wfms\/s capture rate reveals infrequent anomalies\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-mso3354e-mem\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO3000-Capture.png\" alt=\"MSO3000E high-speed waveform capture\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003e200,000 wfms\/s capture rate reveals infrequent anomalies\u003c\/span\u003e\n\u003c\/a\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cdiv class=\"product-key-features\"\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e350 MHz Bandwidth, 4 Analog Channels\u003c\/strong\u003e — Four-channel capture at up to 350 MHz for mixed-signal debugging and signal analysis.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2.5 GSa\/s Sample Rate\u003c\/strong\u003e — Captures fast edges and high-frequency content with accurate timing resolution.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e250 Mpts Memory Depth\u003c\/strong\u003e — Deep memory for capturing long signal records without reducing sample rate.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e200,000 wfms\/s Capture Rate\u003c\/strong\u003e — Fast acquisition reveals infrequent glitches, runts, and timing violations that slower scopes miss.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e16 Digital Channels (Logic Analyzer Included)\u003c\/strong\u003e — Mixed-signal debugging with time-correlated analog and digital views. Logic probe pod included.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt-In 50 MHz Signal Generator\u003c\/strong\u003e — Arbitrary waveform generator output for stimulus-response testing without external equipment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e36 Automated Measurements\u003c\/strong\u003e — Time, voltage, frequency, and statistical measurements with min\/max\/average\/standard deviation tracking.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eArea Trigger\u003c\/strong\u003e — Draw a region on screen and trigger when a waveform enters or exits it — effective for isolating anomalies in complex signals.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBode Plot Analysis\u003c\/strong\u003e — Automated frequency response measurement for characterizing power supply control loops and filter circuits.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e8-Inch Capacitive Touchscreen\u003c\/strong\u003e — Pinch, zoom, drag, and gesture navigation for efficient waveform interaction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeb Remote Control\u003c\/strong\u003e — Access the oscilloscope interface from any browser on the LAN — no software installation required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnectivity\u003c\/strong\u003e — USB, LAN, VGA, EXT trigger, AUX output.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eDeep Memory for Complete Signal Capture\u003c\/h3\u003e\n\u003cp\u003eWith 250 Mpts of memory depth, the oscilloscope maintains its full 2.5 GSa\/s sample rate across wide time base settings. This means you can capture an entire communication sequence, a full power-on cycle, or a long servo motor control loop without aliasing or missing events. Zoom into any portion of the captured record to examine details at full resolution.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-mso3354e-cap\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO3000-Capture.png\" alt=\"MSO3000E high-speed waveform capture\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003e200,000 wfms\/s capture rate reveals infrequent anomalies\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-mso3354e-cap\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO3000-Capture.png\" alt=\"MSO3000E high-speed waveform capture\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003e200,000 wfms\/s capture rate reveals infrequent anomalies\u003c\/span\u003e\n\u003c\/a\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-mso3354e-awg\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO3000-AWG.png\" alt=\"MSO3000E built-in signal generator output\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eBuilt-in arbitrary waveform generator for stimulus-response testing\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003ch3\u003eBuilt-In Signal Generator\u003c\/h3\u003e\n\u003cp\u003eThe 50 MHz arbitrary waveform generator outputs sine, square, ramp, pulse, noise, and user-defined arbitrary waveforms directly from the oscilloscope. Use it to inject test signals into a circuit and capture the response on the scope channels simultaneously — ideal for characterizing filters, amplifiers, and feedback loops without a separate signal generator on the bench.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-mso3354e-awg\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO3000-AWG.png\" alt=\"MSO3000E built-in signal generator output\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eBuilt-in arbitrary waveform generator for stimulus-response testing\u003c\/span\u003e\n\u003c\/a\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eBode Plot for Loop Analysis\u003c\/h3\u003e\n\u003cp\u003eThe Bode plot function sweeps the built-in signal generator across a frequency range while measuring gain and phase on the oscilloscope input. The result is a frequency response plot displayed directly on screen — essential for characterizing power supply feedback loops, verifying filter rolloff, and measuring amplifier bandwidth. Requires the -S model or external signal source.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-mso3354e-bode\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO3000-Bode.png\" alt=\"MSO3000E Bode plot frequency response analysis\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eBode plot analysis for power supply loop characterization\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-mso3354e-bode\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO3000-Bode.png\" alt=\"MSO3000E Bode plot frequency response analysis\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eBode plot analysis for power supply loop characterization\u003c\/span\u003e\n\u003c\/a\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eMixed-Signal Debugging\u003c\/h3\u003e\n\u003cp\u003eThe 16 digital channels display alongside analog traces with full time correlation, letting you see bus activity and analog behavior on the same time axis. This is critical for debugging embedded systems where a software command on I²C triggers an analog response — you need to see both to understand the system. The logic probe pod is included with all MSO models.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-mso3354e-la\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO3000-LAScreen.png\" alt=\"MSO3000E logic analyzer display with 16 digital channels\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003e16-channel logic analyzer view correlated with analog traces\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-mso3354e-la\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO3000-LAScreen.png\" alt=\"MSO3000E logic analyzer display with 16 digital channels\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003e16-channel logic analyzer view correlated with analog traces\u003c\/span\u003e\n\u003c\/a\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-mso3354e-trig\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO3000-AreaTrigger.png\" alt=\"MSO3000E area trigger function\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eArea trigger for isolating anomalies in complex signals\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003ch3\u003eAdvanced Triggering and Area Trigger\u003c\/h3\u003e\n\u003cp\u003eBeyond standard edge triggering, the MSO\/UPO3000E supports pulse width, slope, video, pattern, and timeout triggers for isolating specific signal conditions. The area trigger lets you draw a box on screen and trigger when a waveform enters or exits it — particularly effective for catching anomalies in signals where you know what the waveform should look like but not exactly when the fault will occur.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-mso3354e-trig\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO3000-AreaTrigger.png\" alt=\"MSO3000E area trigger function\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eArea trigger for isolating anomalies in complex signals\u003c\/span\u003e\n\u003c\/a\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eWeb-Based Remote Control\u003c\/h3\u003e\n\u003cp\u003eConnect the oscilloscope to your LAN and access the full interface from any web browser — no dedicated software installation required. Adjust settings, view waveforms, capture screenshots, and transfer data remotely. This is useful for rack-mounted test setups, shared lab instruments, or situations where the oscilloscope is physically difficult to access.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-mso3354e-web\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO3000-webcontrol.png\" alt=\"MSO3000E web-based remote control interface\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eWeb-based remote control from any browser on the LAN\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-mso3354e-web\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO3000-webcontrol.png\" alt=\"MSO3000E web-based remote control interface\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eWeb-based remote control from any browser on the LAN\u003c\/span\u003e\n\u003c\/a\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eApplications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEmbedded Systems Development\u003c\/strong\u003e — Debug microcontroller firmware with time-correlated analog and digital views. Decode SPI, I²C, UART, and CAN bus traffic alongside power rails and clock signals.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Electronics\u003c\/strong\u003e — Capture switching waveforms with deep memory, characterize control loop stability with Bode plot analysis, and trigger on specific voltage or timing conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-Channel Signal Analysis\u003c\/strong\u003e — Four analog channels for simultaneous capture of input, output, reference, and feedback signals in complex circuits.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEducation and Training\u003c\/strong\u003e — The touchscreen interface and automated measurements lower the barrier for students learning oscilloscope operation, while the advanced features support upper-level lab coursework.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturing and Quality\u003c\/strong\u003e — Automated measurements with pass\/fail limits, web remote control for rack-mounted setups, and data export for test documentation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eAre serial bus protocol decodes included?\u003c\/p\u003e\n\u003cp\u003eNo. Protocol decoding for RS-232, UART, I²C, SPI, CAN, CAN-FD, LIN, and FlexRay is available as optional software licenses. See the \u003ca href=\"\/collections\/mso3000e\"\u003eMSO\/UPO3000E series page\u003c\/a\u003e for available decode options.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eWhat waveforms can the built-in signal generator produce?\u003c\/p\u003e\n\u003cp\u003eThe -S models include a 50 MHz arbitrary waveform generator that outputs sine, square, ramp, pulse, noise, DC, and user-defined arbitrary waveforms. It also enables the Bode plot function for automated frequency response measurement.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eWhat is the difference between MSO and UPO models?\u003c\/p\u003e\n\u003cp\u003eMSO models include the 16-channel logic probe pod in the box. UPO models are the same oscilloscope without the logic pod — you can add it later with the \u003ca href=\"\/products\/ut-m15\"\u003eUT-M15\u003c\/a\u003e and \u003ca href=\"\/products\/upo3000cs-la16\"\u003eLA16 software license\u003c\/a\u003e. All other specifications are identical between MSO and UPO models at the same bandwidth and channel count.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eCan I upgrade the bandwidth later?\u003c\/p\u003e\n\u003cp\u003eNo. The bandwidth is fixed at the factory. Choose the bandwidth you need at purchase — 350 MHz for this model. The 500 MHz and 350 MHz models share the same chassis and feature set.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003cp\u003ePart of the \u003ca href=\"\/collections\/mso3000e\"\u003eMSO\/UPO3000E oscilloscope series\u003c\/a\u003e. All models share the same 2.5 GSa\/s sample rate, 250 Mpts memory, and measurement engine. See the \u003ca href=\"\/collections\/mso3000e\"\u003eseries comparison table\u003c\/a\u003e to find the right combination of bandwidth, channels, and accessories for your application.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"UNI-T","offers":[{"title":"Default Title","offer_id":46689498857756,"sku":"181100300031X","price":2399.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/MSO3354E-S_Probes.jpg?v=1720807127"},{"product_id":"mso3504e","title":"MSO3504E 500 MHz 4+16Ch Mixed Signal Oscilloscope","description":"\u003ch1\u003eMSO3504E | 500 MHz 4+16Ch Mixed Signal Oscilloscope\u003c\/h1\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThe MSO3504E is a 500 MHz mixed signal oscilloscope with 4 analog channels and 16 digital channels (logic analyzer included). It samples at 2.5 GSa\/s with 250 Mpts memory depth and captures waveforms at up to 200,000 wfms\/s on an 8-inch capacitive touchscreen. All MSO\/UPO3000E-series instruments share the same platform — the same sample rate, memory, and measurement engine — with differences only in bandwidth, channel count, and included accessories.\u003c\/p\u003e\n\u003cp\u003eThe oscilloscope provides 36 automated measurements with statistics, advanced triggering (edge, pulse width, slope, video, pattern, and area trigger), Bode plot analysis for power supply loop characterization, and web-based remote control via LAN. Serial bus protocol decoding for RS-232, UART, I²C, SPI, CAN, CAN-FD, LIN, and FlexRay is available as optional software licenses.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-mso3504e-cap\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO3000-Capture.png\" alt=\"MSO3000E high-speed waveform capture\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003e200,000 wfms\/s capture rate reveals infrequent anomalies\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-mso3504e-mem\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO3000-Capture.png\" alt=\"MSO3000E high-speed waveform capture\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003e200,000 wfms\/s capture rate reveals infrequent anomalies\u003c\/span\u003e\n\u003c\/a\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cdiv class=\"product-key-features\"\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e500 MHz Bandwidth, 4 Analog Channels\u003c\/strong\u003e — Four-channel capture at up to 500 MHz for mixed-signal debugging and signal analysis.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2.5 GSa\/s Sample Rate\u003c\/strong\u003e — Captures fast edges and high-frequency content with accurate timing resolution.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e250 Mpts Memory Depth\u003c\/strong\u003e — Deep memory for capturing long signal records without reducing sample rate.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e200,000 wfms\/s Capture Rate\u003c\/strong\u003e — Fast acquisition reveals infrequent glitches, runts, and timing violations that slower scopes miss.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e16 Digital Channels (Logic Analyzer Included)\u003c\/strong\u003e — Mixed-signal debugging with time-correlated analog and digital views. Logic probe pod included.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e36 Automated Measurements\u003c\/strong\u003e — Time, voltage, frequency, and statistical measurements with min\/max\/average\/standard deviation tracking.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eArea Trigger\u003c\/strong\u003e — Draw a region on screen and trigger when a waveform enters or exits it — effective for isolating anomalies in complex signals.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBode Plot Analysis\u003c\/strong\u003e — Automated frequency response measurement for characterizing power supply control loops and filter circuits.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e8-Inch Capacitive Touchscreen\u003c\/strong\u003e — Pinch, zoom, drag, and gesture navigation for efficient waveform interaction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeb Remote Control\u003c\/strong\u003e — Access the oscilloscope interface from any browser on the LAN — no software installation required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnectivity\u003c\/strong\u003e — USB, LAN, VGA, EXT trigger, AUX output.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eDeep Memory for Complete Signal Capture\u003c\/h3\u003e\n\u003cp\u003eWith 250 Mpts of memory depth, the oscilloscope maintains its full 2.5 GSa\/s sample rate across wide time base settings. This means you can capture an entire communication sequence, a full power-on cycle, or a long servo motor control loop without aliasing or missing events. Zoom into any portion of the captured record to examine details at full resolution.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-mso3504e-cap\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO3000-Capture.png\" alt=\"MSO3000E high-speed waveform capture\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003e200,000 wfms\/s capture rate reveals infrequent anomalies\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-mso3504e-cap\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO3000-Capture.png\" alt=\"MSO3000E high-speed waveform capture\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003e200,000 wfms\/s capture rate reveals infrequent anomalies\u003c\/span\u003e\n\u003c\/a\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eMixed-Signal Debugging\u003c\/h3\u003e\n\u003cp\u003eThe 16 digital channels display alongside analog traces with full time correlation, letting you see bus activity and analog behavior on the same time axis. This is critical for debugging embedded systems where a software command on I²C triggers an analog response — you need to see both to understand the system. The logic probe pod is included with all MSO models.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-mso3504e-la\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO3000-LAScreen.png\" alt=\"MSO3000E logic analyzer display with 16 digital channels\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003e16-channel logic analyzer view correlated with analog traces\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-mso3504e-la\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO3000-LAScreen.png\" alt=\"MSO3000E logic analyzer display with 16 digital channels\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003e16-channel logic analyzer view correlated with analog traces\u003c\/span\u003e\n\u003c\/a\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-mso3504e-trig\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO3000-AreaTrigger.png\" alt=\"MSO3000E area trigger function\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eArea trigger for isolating anomalies in complex signals\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003ch3\u003eAdvanced Triggering and Area Trigger\u003c\/h3\u003e\n\u003cp\u003eBeyond standard edge triggering, the MSO\/UPO3000E supports pulse width, slope, video, pattern, and timeout triggers for isolating specific signal conditions. The area trigger lets you draw a box on screen and trigger when a waveform enters or exits it — particularly effective for catching anomalies in signals where you know what the waveform should look like but not exactly when the fault will occur.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-mso3504e-trig\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO3000-AreaTrigger.png\" alt=\"MSO3000E area trigger function\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eArea trigger for isolating anomalies in complex signals\u003c\/span\u003e\n\u003c\/a\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eWeb-Based Remote Control\u003c\/h3\u003e\n\u003cp\u003eConnect the oscilloscope to your LAN and access the full interface from any web browser — no dedicated software installation required. Adjust settings, view waveforms, capture screenshots, and transfer data remotely. This is useful for rack-mounted test setups, shared lab instruments, or situations where the oscilloscope is physically difficult to access.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-mso3504e-web\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO3000-webcontrol.png\" alt=\"MSO3000E web-based remote control interface\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eWeb-based remote control from any browser on the LAN\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-mso3504e-web\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO3000-webcontrol.png\" alt=\"MSO3000E web-based remote control interface\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eWeb-based remote control from any browser on the LAN\u003c\/span\u003e\n\u003c\/a\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eApplications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEmbedded Systems Development\u003c\/strong\u003e — Debug microcontroller firmware with time-correlated analog and digital views. Decode SPI, I²C, UART, and CAN bus traffic alongside power rails and clock signals.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Electronics\u003c\/strong\u003e — Capture switching waveforms with deep memory, characterize control loop stability with Bode plot analysis, and trigger on specific voltage or timing conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-Channel Signal Analysis\u003c\/strong\u003e — Four analog channels for simultaneous capture of input, output, reference, and feedback signals in complex circuits.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEducation and Training\u003c\/strong\u003e — The touchscreen interface and automated measurements lower the barrier for students learning oscilloscope operation, while the advanced features support upper-level lab coursework.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturing and Quality\u003c\/strong\u003e — Automated measurements with pass\/fail limits, web remote control for rack-mounted setups, and data export for test documentation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eAre serial bus protocol decodes included?\u003c\/p\u003e\n\u003cp\u003eNo. Protocol decoding for RS-232, UART, I²C, SPI, CAN, CAN-FD, LIN, and FlexRay is available as optional software licenses. See the \u003ca href=\"\/collections\/mso3000e\"\u003eMSO\/UPO3000E series page\u003c\/a\u003e for available decode options.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eWhat is the difference between MSO and UPO models?\u003c\/p\u003e\n\u003cp\u003eMSO models include the 16-channel logic probe pod in the box. UPO models are the same oscilloscope without the logic pod — you can add it later with the \u003ca href=\"\/products\/ut-m15\"\u003eUT-M15\u003c\/a\u003e and \u003ca href=\"\/products\/upo3000cs-la16\"\u003eLA16 software license\u003c\/a\u003e. All other specifications are identical between MSO and UPO models at the same bandwidth and channel count.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eCan I upgrade the bandwidth later?\u003c\/p\u003e\n\u003cp\u003eNo. The bandwidth is fixed at the factory. Choose the bandwidth you need at purchase — 500 MHz for this model. The 500 MHz and 350 MHz models share the same chassis and feature set.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003cp\u003ePart of the \u003ca href=\"\/collections\/mso3000e\"\u003eMSO\/UPO3000E oscilloscope series\u003c\/a\u003e. All models share the same 2.5 GSa\/s sample rate, 250 Mpts memory, and measurement engine. See the \u003ca href=\"\/collections\/mso3000e\"\u003eseries comparison table\u003c\/a\u003e to find the right combination of bandwidth, channels, and accessories for your application.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"UNI-T","offers":[{"title":"Default Title","offer_id":46689514258716,"sku":"181100300028X","price":2511.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/MSO3504E_Probes.jpg?v=1720807136"},{"product_id":"mso3354e","title":"MSO3354E 350 MHz 4+16Ch Mixed Signal Oscilloscope","description":"\u003ch1\u003eMSO3354E | 350 MHz 4+16Ch Mixed Signal Oscilloscope\u003c\/h1\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThe MSO3354E is a 350 MHz mixed signal oscilloscope with 4 analog channels and 16 digital channels (logic analyzer included). It samples at 2.5 GSa\/s with 250 Mpts memory depth and captures waveforms at up to 200,000 wfms\/s on an 8-inch capacitive touchscreen. All MSO\/UPO3000E-series instruments share the same platform — the same sample rate, memory, and measurement engine — with differences only in bandwidth, channel count, and included accessories.\u003c\/p\u003e\n\u003cp\u003eThe oscilloscope provides 36 automated measurements with statistics, advanced triggering (edge, pulse width, slope, video, pattern, and area trigger), Bode plot analysis for power supply loop characterization, and web-based remote control via LAN. Serial bus protocol decoding for RS-232, UART, I²C, SPI, CAN, CAN-FD, LIN, and FlexRay is available as optional software licenses.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-mso3354e-cap\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO3000-Capture.png\" alt=\"MSO3000E high-speed waveform capture\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003e200,000 wfms\/s capture rate reveals infrequent anomalies\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-mso3354e-mem\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO3000-Capture.png\" alt=\"MSO3000E high-speed waveform capture\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003e200,000 wfms\/s capture rate reveals infrequent anomalies\u003c\/span\u003e\n\u003c\/a\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cdiv class=\"product-key-features\"\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e350 MHz Bandwidth, 4 Analog Channels\u003c\/strong\u003e — Four-channel capture at up to 350 MHz for mixed-signal debugging and signal analysis.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2.5 GSa\/s Sample Rate\u003c\/strong\u003e — Captures fast edges and high-frequency content with accurate timing resolution.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e250 Mpts Memory Depth\u003c\/strong\u003e — Deep memory for capturing long signal records without reducing sample rate.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e200,000 wfms\/s Capture Rate\u003c\/strong\u003e — Fast acquisition reveals infrequent glitches, runts, and timing violations that slower scopes miss.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e16 Digital Channels (Logic Analyzer Included)\u003c\/strong\u003e — Mixed-signal debugging with time-correlated analog and digital views. Logic probe pod included.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e36 Automated Measurements\u003c\/strong\u003e — Time, voltage, frequency, and statistical measurements with min\/max\/average\/standard deviation tracking.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eArea Trigger\u003c\/strong\u003e — Draw a region on screen and trigger when a waveform enters or exits it — effective for isolating anomalies in complex signals.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBode Plot Analysis\u003c\/strong\u003e — Automated frequency response measurement for characterizing power supply control loops and filter circuits.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e8-Inch Capacitive Touchscreen\u003c\/strong\u003e — Pinch, zoom, drag, and gesture navigation for efficient waveform interaction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeb Remote Control\u003c\/strong\u003e — Access the oscilloscope interface from any browser on the LAN — no software installation required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnectivity\u003c\/strong\u003e — USB, LAN, VGA, EXT trigger, AUX output.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eDeep Memory for Complete Signal Capture\u003c\/h3\u003e\n\u003cp\u003eWith 250 Mpts of memory depth, the oscilloscope maintains its full 2.5 GSa\/s sample rate across wide time base settings. This means you can capture an entire communication sequence, a full power-on cycle, or a long servo motor control loop without aliasing or missing events. Zoom into any portion of the captured record to examine details at full resolution.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-mso3354e-cap\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO3000-Capture.png\" alt=\"MSO3000E high-speed waveform capture\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003e200,000 wfms\/s capture rate reveals infrequent anomalies\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-mso3354e-cap\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO3000-Capture.png\" alt=\"MSO3000E high-speed waveform capture\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003e200,000 wfms\/s capture rate reveals infrequent anomalies\u003c\/span\u003e\n\u003c\/a\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eMixed-Signal Debugging\u003c\/h3\u003e\n\u003cp\u003eThe 16 digital channels display alongside analog traces with full time correlation, letting you see bus activity and analog behavior on the same time axis. This is critical for debugging embedded systems where a software command on I²C triggers an analog response — you need to see both to understand the system. The logic probe pod is included with all MSO models.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-mso3354e-la\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO3000-LAScreen.png\" alt=\"MSO3000E logic analyzer display with 16 digital channels\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003e16-channel logic analyzer view correlated with analog traces\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-mso3354e-la\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO3000-LAScreen.png\" alt=\"MSO3000E logic analyzer display with 16 digital channels\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003e16-channel logic analyzer view correlated with analog traces\u003c\/span\u003e\n\u003c\/a\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-mso3354e-trig\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO3000-AreaTrigger.png\" alt=\"MSO3000E area trigger function\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eArea trigger for isolating anomalies in complex signals\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003ch3\u003eAdvanced Triggering and Area Trigger\u003c\/h3\u003e\n\u003cp\u003eBeyond standard edge triggering, the MSO\/UPO3000E supports pulse width, slope, video, pattern, and timeout triggers for isolating specific signal conditions. The area trigger lets you draw a box on screen and trigger when a waveform enters or exits it — particularly effective for catching anomalies in signals where you know what the waveform should look like but not exactly when the fault will occur.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-mso3354e-trig\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO3000-AreaTrigger.png\" alt=\"MSO3000E area trigger function\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eArea trigger for isolating anomalies in complex signals\u003c\/span\u003e\n\u003c\/a\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eWeb-Based Remote Control\u003c\/h3\u003e\n\u003cp\u003eConnect the oscilloscope to your LAN and access the full interface from any web browser — no dedicated software installation required. Adjust settings, view waveforms, capture screenshots, and transfer data remotely. This is useful for rack-mounted test setups, shared lab instruments, or situations where the oscilloscope is physically difficult to access.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-mso3354e-web\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO3000-webcontrol.png\" alt=\"MSO3000E web-based remote control interface\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eWeb-based remote control from any browser on the LAN\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-mso3354e-web\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO3000-webcontrol.png\" alt=\"MSO3000E web-based remote control interface\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eWeb-based remote control from any browser on the LAN\u003c\/span\u003e\n\u003c\/a\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eApplications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEmbedded Systems Development\u003c\/strong\u003e — Debug microcontroller firmware with time-correlated analog and digital views. Decode SPI, I²C, UART, and CAN bus traffic alongside power rails and clock signals.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Electronics\u003c\/strong\u003e — Capture switching waveforms with deep memory, characterize control loop stability with Bode plot analysis, and trigger on specific voltage or timing conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-Channel Signal Analysis\u003c\/strong\u003e — Four analog channels for simultaneous capture of input, output, reference, and feedback signals in complex circuits.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEducation and Training\u003c\/strong\u003e — The touchscreen interface and automated measurements lower the barrier for students learning oscilloscope operation, while the advanced features support upper-level lab coursework.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturing and Quality\u003c\/strong\u003e — Automated measurements with pass\/fail limits, web remote control for rack-mounted setups, and data export for test documentation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eAre serial bus protocol decodes included?\u003c\/p\u003e\n\u003cp\u003eNo. Protocol decoding for RS-232, UART, I²C, SPI, CAN, CAN-FD, LIN, and FlexRay is available as optional software licenses. See the \u003ca href=\"\/collections\/mso3000e\"\u003eMSO\/UPO3000E series page\u003c\/a\u003e for available decode options.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eWhat is the difference between MSO and UPO models?\u003c\/p\u003e\n\u003cp\u003eMSO models include the 16-channel logic probe pod in the box. UPO models are the same oscilloscope without the logic pod — you can add it later with the \u003ca href=\"\/products\/ut-m15\"\u003eUT-M15\u003c\/a\u003e and \u003ca href=\"\/products\/upo3000cs-la16\"\u003eLA16 software license\u003c\/a\u003e. All other specifications are identical between MSO and UPO models at the same bandwidth and channel count.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eCan I upgrade the bandwidth later?\u003c\/p\u003e\n\u003cp\u003eNo. The bandwidth is fixed at the factory. Choose the bandwidth you need at purchase — 350 MHz for this model. The 500 MHz and 350 MHz models share the same chassis and feature set.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003cp\u003ePart of the \u003ca href=\"\/collections\/mso3000e\"\u003eMSO\/UPO3000E oscilloscope series\u003c\/a\u003e. All models share the same 2.5 GSa\/s sample rate, 250 Mpts memory, and measurement engine. See the \u003ca href=\"\/collections\/mso3000e\"\u003eseries comparison table\u003c\/a\u003e to find the right combination of bandwidth, channels, and accessories for your application.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"UNI-T","offers":[{"title":"Default Title","offer_id":46696288682268,"sku":"181100300037X","price":1887.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/MSO3354E_Probes.jpg?v=1720807145"},{"product_id":"mso3352e","title":"MSO3352E 350 MHz 2+16Ch Mixed Signal Oscilloscope","description":"\u003ch1\u003eMSO3352E | 350 MHz 2+16Ch Mixed Signal Oscilloscope\u003c\/h1\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThe MSO3352E is a 350 MHz mixed signal oscilloscope with 2 analog channels and 16 digital channels (logic analyzer included). It samples at 2.5 GSa\/s with 250 Mpts memory depth and captures waveforms at up to 200,000 wfms\/s on an 8-inch capacitive touchscreen. All MSO\/UPO3000E-series instruments share the same platform — the same sample rate, memory, and measurement engine — with differences only in bandwidth, channel count, and included accessories.\u003c\/p\u003e\n\u003cp\u003eThe oscilloscope provides 36 automated measurements with statistics, advanced triggering (edge, pulse width, slope, video, pattern, and area trigger), Bode plot analysis for power supply loop characterization, and web-based remote control via LAN. Serial bus protocol decoding for RS-232, UART, I²C, SPI, CAN, CAN-FD, LIN, and FlexRay is available as optional software licenses.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-mso3352e-cap\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO3000-Capture.png\" alt=\"MSO3000E high-speed waveform capture\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003e200,000 wfms\/s capture rate reveals infrequent anomalies\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-mso3352e-mem\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO3000-Capture.png\" alt=\"MSO3000E high-speed waveform capture\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003e200,000 wfms\/s capture rate reveals infrequent anomalies\u003c\/span\u003e\n\u003c\/a\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cdiv class=\"product-key-features\"\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e350 MHz Bandwidth, 2 Analog Channels\u003c\/strong\u003e — Two-channel capture at up to 350 MHz for mixed-signal debugging and signal analysis.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2.5 GSa\/s Sample Rate\u003c\/strong\u003e — Captures fast edges and high-frequency content with accurate timing resolution.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e250 Mpts Memory Depth\u003c\/strong\u003e — Deep memory for capturing long signal records without reducing sample rate.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e200,000 wfms\/s Capture Rate\u003c\/strong\u003e — Fast acquisition reveals infrequent glitches, runts, and timing violations that slower scopes miss.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e16 Digital Channels (Logic Analyzer Included)\u003c\/strong\u003e — Mixed-signal debugging with time-correlated analog and digital views. Logic probe pod included.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e36 Automated Measurements\u003c\/strong\u003e — Time, voltage, frequency, and statistical measurements with min\/max\/average\/standard deviation tracking.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eArea Trigger\u003c\/strong\u003e — Draw a region on screen and trigger when a waveform enters or exits it — effective for isolating anomalies in complex signals.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBode Plot Analysis\u003c\/strong\u003e — Automated frequency response measurement for characterizing power supply control loops and filter circuits.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e8-Inch Capacitive Touchscreen\u003c\/strong\u003e — Pinch, zoom, drag, and gesture navigation for efficient waveform interaction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeb Remote Control\u003c\/strong\u003e — Access the oscilloscope interface from any browser on the LAN — no software installation required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnectivity\u003c\/strong\u003e — USB, LAN, VGA, EXT trigger, AUX output.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eDeep Memory for Complete Signal Capture\u003c\/h3\u003e\n\u003cp\u003eWith 250 Mpts of memory depth, the oscilloscope maintains its full 2.5 GSa\/s sample rate across wide time base settings. This means you can capture an entire communication sequence, a full power-on cycle, or a long servo motor control loop without aliasing or missing events. Zoom into any portion of the captured record to examine details at full resolution.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-mso3352e-cap\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO3000-Capture.png\" alt=\"MSO3000E high-speed waveform capture\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003e200,000 wfms\/s capture rate reveals infrequent anomalies\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-mso3352e-cap\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO3000-Capture.png\" alt=\"MSO3000E high-speed waveform capture\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003e200,000 wfms\/s capture rate reveals infrequent anomalies\u003c\/span\u003e\n\u003c\/a\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eMixed-Signal Debugging\u003c\/h3\u003e\n\u003cp\u003eThe 16 digital channels display alongside analog traces with full time correlation, letting you see bus activity and analog behavior on the same time axis. This is critical for debugging embedded systems where a software command on I²C triggers an analog response — you need to see both to understand the system. The logic probe pod is included with all MSO models.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-mso3352e-la\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO3000-LAScreen.png\" alt=\"MSO3000E logic analyzer display with 16 digital channels\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003e16-channel logic analyzer view correlated with analog traces\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-mso3352e-la\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO3000-LAScreen.png\" alt=\"MSO3000E logic analyzer display with 16 digital channels\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003e16-channel logic analyzer view correlated with analog traces\u003c\/span\u003e\n\u003c\/a\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-mso3352e-trig\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO3000-AreaTrigger.png\" alt=\"MSO3000E area trigger function\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eArea trigger for isolating anomalies in complex signals\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003ch3\u003eAdvanced Triggering and Area Trigger\u003c\/h3\u003e\n\u003cp\u003eBeyond standard edge triggering, the MSO\/UPO3000E supports pulse width, slope, video, pattern, and timeout triggers for isolating specific signal conditions. The area trigger lets you draw a box on screen and trigger when a waveform enters or exits it — particularly effective for catching anomalies in signals where you know what the waveform should look like but not exactly when the fault will occur.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-mso3352e-trig\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO3000-AreaTrigger.png\" alt=\"MSO3000E area trigger function\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eArea trigger for isolating anomalies in complex signals\u003c\/span\u003e\n\u003c\/a\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eWeb-Based Remote Control\u003c\/h3\u003e\n\u003cp\u003eConnect the oscilloscope to your LAN and access the full interface from any web browser — no dedicated software installation required. Adjust settings, view waveforms, capture screenshots, and transfer data remotely. This is useful for rack-mounted test setups, shared lab instruments, or situations where the oscilloscope is physically difficult to access.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-mso3352e-web\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO3000-webcontrol.png\" alt=\"MSO3000E web-based remote control interface\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eWeb-based remote control from any browser on the LAN\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-mso3352e-web\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO3000-webcontrol.png\" alt=\"MSO3000E web-based remote control interface\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eWeb-based remote control from any browser on the LAN\u003c\/span\u003e\n\u003c\/a\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eApplications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEmbedded Systems Development\u003c\/strong\u003e — Debug microcontroller firmware with time-correlated analog and digital views. Decode SPI, I²C, UART, and CAN bus traffic alongside power rails and clock signals.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Electronics\u003c\/strong\u003e — Capture switching waveforms with deep memory, characterize control loop stability with Bode plot analysis, and trigger on specific voltage or timing conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEducation and Training\u003c\/strong\u003e — The touchscreen interface and automated measurements lower the barrier for students learning oscilloscope operation, while the advanced features support upper-level lab coursework.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturing and Quality\u003c\/strong\u003e — Automated measurements with pass\/fail limits, web remote control for rack-mounted setups, and data export for test documentation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eAre serial bus protocol decodes included?\u003c\/p\u003e\n\u003cp\u003eNo. Protocol decoding for RS-232, UART, I²C, SPI, CAN, CAN-FD, LIN, and FlexRay is available as optional software licenses. See the \u003ca href=\"\/collections\/mso3000e\"\u003eMSO\/UPO3000E series page\u003c\/a\u003e for available decode options.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eWhat is the difference between MSO and UPO models?\u003c\/p\u003e\n\u003cp\u003eMSO models include the 16-channel logic probe pod in the box. UPO models are the same oscilloscope without the logic pod — you can add it later with the \u003ca href=\"\/products\/ut-m15\"\u003eUT-M15\u003c\/a\u003e and \u003ca href=\"\/products\/upo3000cs-la16\"\u003eLA16 software license\u003c\/a\u003e. All other specifications are identical between MSO and UPO models at the same bandwidth and channel count.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eCan I upgrade the bandwidth later?\u003c\/p\u003e\n\u003cp\u003eNo. The bandwidth is fixed at the factory. Choose the bandwidth you need at purchase — 350 MHz for this model. The 500 MHz and 350 MHz models share the same chassis and feature set.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003cp\u003ePart of the \u003ca href=\"\/collections\/mso3000e\"\u003eMSO\/UPO3000E oscilloscope series\u003c\/a\u003e. All models share the same 2.5 GSa\/s sample rate, 250 Mpts memory, and measurement engine. See the \u003ca href=\"\/collections\/mso3000e\"\u003eseries comparison table\u003c\/a\u003e to find the right combination of bandwidth, channels, and accessories for your application.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"UNI-T","offers":[{"title":"Default Title","offer_id":46697991667996,"sku":"181100300036X","price":1615.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/MSO3352E_Probes.jpg?v=1720807153"},{"product_id":"upo3504e","title":"UPO3504E 500 MHz 4Ch Oscilloscope (Logic Pod Optional)","description":"\u003ch1\u003eUPO3504E | 500 MHz 4Ch Oscilloscope (Logic Pod Optional)\u003c\/h1\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThe UPO3504E is a 500 MHz mixed signal oscilloscope with 4 analog channels. Digital channels available via optional \u003ca href=\"\/products\/ut-m15\"\u003eUT-M15 logic probe pod\u003c\/a\u003e. It samples at 2.5 GSa\/s with 250 Mpts memory depth and captures waveforms at up to 200,000 wfms\/s on an 8-inch capacitive touchscreen. All MSO\/UPO3000E-series instruments share the same platform — the same sample rate, memory, and measurement engine — with differences only in bandwidth, channel count, and included accessories.\u003c\/p\u003e\n\u003cp\u003eThe oscilloscope provides 36 automated measurements with statistics, advanced triggering (edge, pulse width, slope, video, pattern, and area trigger), Bode plot analysis for power supply loop characterization, and web-based remote control via LAN. Serial bus protocol decoding for RS-232, UART, I²C, SPI, CAN, CAN-FD, LIN, and FlexRay is available as optional software licenses.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-upo3504e-cap\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO3000-Capture.png\" alt=\"MSO3000E high-speed waveform capture\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003e200,000 wfms\/s capture rate reveals infrequent anomalies\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-upo3504e-mem\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO3000-Capture.png\" alt=\"MSO3000E high-speed waveform capture\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003e200,000 wfms\/s capture rate reveals infrequent anomalies\u003c\/span\u003e\n\u003c\/a\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cdiv class=\"product-key-features\"\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e500 MHz Bandwidth, 4 Analog Channels\u003c\/strong\u003e — Four-channel capture at up to 500 MHz for mixed-signal debugging and signal analysis.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2.5 GSa\/s Sample Rate\u003c\/strong\u003e — Captures fast edges and high-frequency content with accurate timing resolution.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e250 Mpts Memory Depth\u003c\/strong\u003e — Deep memory for capturing long signal records without reducing sample rate.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e200,000 wfms\/s Capture Rate\u003c\/strong\u003e — Fast acquisition reveals infrequent glitches, runts, and timing violations that slower scopes miss.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e16 Digital Channels (Optional)\u003c\/strong\u003e — Add mixed-signal capability with the \u003ca href=\"\/products\/ut-m15\"\u003eUT-M15 logic probe pod\u003c\/a\u003e (sold separately).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e36 Automated Measurements\u003c\/strong\u003e — Time, voltage, frequency, and statistical measurements with min\/max\/average\/standard deviation tracking.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eArea Trigger\u003c\/strong\u003e — Draw a region on screen and trigger when a waveform enters or exits it — effective for isolating anomalies in complex signals.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBode Plot Analysis\u003c\/strong\u003e — Automated frequency response measurement for characterizing power supply control loops and filter circuits.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e8-Inch Capacitive Touchscreen\u003c\/strong\u003e — Pinch, zoom, drag, and gesture navigation for efficient waveform interaction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeb Remote Control\u003c\/strong\u003e — Access the oscilloscope interface from any browser on the LAN — no software installation required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnectivity\u003c\/strong\u003e — USB, LAN, VGA, EXT trigger, AUX output.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eDeep Memory for Complete Signal Capture\u003c\/h3\u003e\n\u003cp\u003eWith 250 Mpts of memory depth, the oscilloscope maintains its full 2.5 GSa\/s sample rate across wide time base settings. This means you can capture an entire communication sequence, a full power-on cycle, or a long servo motor control loop without aliasing or missing events. Zoom into any portion of the captured record to examine details at full resolution.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-upo3504e-cap\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO3000-Capture.png\" alt=\"MSO3000E high-speed waveform capture\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003e200,000 wfms\/s capture rate reveals infrequent anomalies\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-upo3504e-cap\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO3000-Capture.png\" alt=\"MSO3000E high-speed waveform capture\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003e200,000 wfms\/s capture rate reveals infrequent anomalies\u003c\/span\u003e\n\u003c\/a\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eOptional Mixed-Signal Capability\u003c\/h3\u003e\n\u003cp\u003eThe UPO3000E platform supports 16 digital channels via the optional \u003ca href=\"\/products\/ut-m15\"\u003eUT-M15 logic probe pod\u003c\/a\u003e. Once connected, digital channels display alongside analog traces with full time correlation — the same mixed-signal debugging capability as the MSO models, added when you need it. Start with analog-only and upgrade to mixed-signal later without replacing the oscilloscope.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-upo3504e-la\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO3000-LAProbe.png\" alt=\"MSO3000E logic analyzer probe connection\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eLogic analyzer probe pod for digital bus visibility\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-upo3504e-la\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO3000-LAProbe.png\" alt=\"MSO3000E logic analyzer probe connection\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eLogic analyzer probe pod for digital bus visibility\u003c\/span\u003e\n\u003c\/a\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-upo3504e-trig\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO3000-AreaTrigger.png\" alt=\"MSO3000E area trigger function\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eArea trigger for isolating anomalies in complex signals\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003ch3\u003eAdvanced Triggering and Area Trigger\u003c\/h3\u003e\n\u003cp\u003eBeyond standard edge triggering, the MSO\/UPO3000E supports pulse width, slope, video, pattern, and timeout triggers for isolating specific signal conditions. The area trigger lets you draw a box on screen and trigger when a waveform enters or exits it — particularly effective for catching anomalies in signals where you know what the waveform should look like but not exactly when the fault will occur.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-upo3504e-trig\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO3000-AreaTrigger.png\" alt=\"MSO3000E area trigger function\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eArea trigger for isolating anomalies in complex signals\u003c\/span\u003e\n\u003c\/a\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eWeb-Based Remote Control\u003c\/h3\u003e\n\u003cp\u003eConnect the oscilloscope to your LAN and access the full interface from any web browser — no dedicated software installation required. Adjust settings, view waveforms, capture screenshots, and transfer data remotely. This is useful for rack-mounted test setups, shared lab instruments, or situations where the oscilloscope is physically difficult to access.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-upo3504e-web\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO3000-webcontrol.png\" alt=\"MSO3000E web-based remote control interface\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eWeb-based remote control from any browser on the LAN\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-upo3504e-web\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO3000-webcontrol.png\" alt=\"MSO3000E web-based remote control interface\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eWeb-based remote control from any browser on the LAN\u003c\/span\u003e\n\u003c\/a\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eApplications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEmbedded Systems Development\u003c\/strong\u003e — Debug microcontroller firmware with time-correlated analog and digital views. Decode SPI, I²C, UART, and CAN bus traffic alongside power rails and clock signals.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Electronics\u003c\/strong\u003e — Capture switching waveforms with deep memory, characterize control loop stability with Bode plot analysis, and trigger on specific voltage or timing conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-Channel Signal Analysis\u003c\/strong\u003e — Four analog channels for simultaneous capture of input, output, reference, and feedback signals in complex circuits.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEducation and Training\u003c\/strong\u003e — The touchscreen interface and automated measurements lower the barrier for students learning oscilloscope operation, while the advanced features support upper-level lab coursework.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturing and Quality\u003c\/strong\u003e — Automated measurements with pass\/fail limits, web remote control for rack-mounted setups, and data export for test documentation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eCan I add digital channels to the UPO3504E later?\u003c\/p\u003e\n\u003cp\u003eYes. The \u003ca href=\"\/products\/ut-m15\"\u003eUT-M15 logic probe pod\u003c\/a\u003e adds 16 digital channels to any UPO3000E-series oscilloscope. It connects to the logic analyzer port on the rear panel. You also need the \u003ca href=\"\/products\/upo3000cs-la16\"\u003eUPO3000CS\/E-LA16 software license\u003c\/a\u003e to enable the logic analyzer function.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eAre serial bus protocol decodes included?\u003c\/p\u003e\n\u003cp\u003eNo. Protocol decoding for RS-232, UART, I²C, SPI, CAN, CAN-FD, LIN, and FlexRay is available as optional software licenses. See the \u003ca href=\"\/collections\/mso3000e\"\u003eMSO\/UPO3000E series page\u003c\/a\u003e for available decode options.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eWhat is the difference between MSO and UPO models?\u003c\/p\u003e\n\u003cp\u003eMSO models include the 16-channel logic probe pod in the box. UPO models are the same oscilloscope without the logic pod — you can add it later with the \u003ca href=\"\/products\/ut-m15\"\u003eUT-M15\u003c\/a\u003e and \u003ca href=\"\/products\/upo3000cs-la16\"\u003eLA16 software license\u003c\/a\u003e. All other specifications are identical between MSO and UPO models at the same bandwidth and channel count.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eCan I upgrade the bandwidth later?\u003c\/p\u003e\n\u003cp\u003eNo. The bandwidth is fixed at the factory. Choose the bandwidth you need at purchase — 500 MHz for this model. The 500 MHz and 350 MHz models share the same chassis and feature set.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003cp\u003ePart of the \u003ca href=\"\/collections\/mso3000e\"\u003eMSO\/UPO3000E oscilloscope series\u003c\/a\u003e. All models share the same 2.5 GSa\/s sample rate, 250 Mpts memory, and measurement engine. See the \u003ca href=\"\/collections\/mso3000e\"\u003eseries comparison table\u003c\/a\u003e to find the right combination of bandwidth, channels, and accessories for your application.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"UNI-T","offers":[{"title":"Default Title","offer_id":46698007822620,"sku":"181100200035X","price":2159.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UPO3504E_Probes_74c559af-261b-4e3e-ad7a-ae2b7c4fe942.jpg?v=1724188656"},{"product_id":"upo3502e","title":"UPO3502E 500 MHz 2Ch Oscilloscope (Logic Pod Optional)","description":"\u003ch1\u003eUPO3502E | 500 MHz 2Ch Oscilloscope (Logic Pod Optional)\u003c\/h1\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThe UPO3502E is a 500 MHz mixed signal oscilloscope with 2 analog channels. Digital channels available via optional \u003ca href=\"\/products\/ut-m15\"\u003eUT-M15 logic probe pod\u003c\/a\u003e. It samples at 2.5 GSa\/s with 250 Mpts memory depth and captures waveforms at up to 200,000 wfms\/s on an 8-inch capacitive touchscreen. All MSO\/UPO3000E-series instruments share the same platform — the same sample rate, memory, and measurement engine — with differences only in bandwidth, channel count, and included accessories.\u003c\/p\u003e\n\u003cp\u003eThe oscilloscope provides 36 automated measurements with statistics, advanced triggering (edge, pulse width, slope, video, pattern, and area trigger), Bode plot analysis for power supply loop characterization, and web-based remote control via LAN. Serial bus protocol decoding for RS-232, UART, I²C, SPI, CAN, CAN-FD, LIN, and FlexRay is available as optional software licenses.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-upo3502e-cap\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO3000-Capture.png\" alt=\"MSO3000E high-speed waveform capture\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003e200,000 wfms\/s capture rate reveals infrequent anomalies\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-upo3502e-mem\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO3000-Capture.png\" alt=\"MSO3000E high-speed waveform capture\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003e200,000 wfms\/s capture rate reveals infrequent anomalies\u003c\/span\u003e\n\u003c\/a\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cdiv class=\"product-key-features\"\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e500 MHz Bandwidth, 2 Analog Channels\u003c\/strong\u003e — Two-channel capture at up to 500 MHz for mixed-signal debugging and signal analysis.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2.5 GSa\/s Sample Rate\u003c\/strong\u003e — Captures fast edges and high-frequency content with accurate timing resolution.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e250 Mpts Memory Depth\u003c\/strong\u003e — Deep memory for capturing long signal records without reducing sample rate.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e200,000 wfms\/s Capture Rate\u003c\/strong\u003e — Fast acquisition reveals infrequent glitches, runts, and timing violations that slower scopes miss.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e16 Digital Channels (Optional)\u003c\/strong\u003e — Add mixed-signal capability with the \u003ca href=\"\/products\/ut-m15\"\u003eUT-M15 logic probe pod\u003c\/a\u003e (sold separately).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e36 Automated Measurements\u003c\/strong\u003e — Time, voltage, frequency, and statistical measurements with min\/max\/average\/standard deviation tracking.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eArea Trigger\u003c\/strong\u003e — Draw a region on screen and trigger when a waveform enters or exits it — effective for isolating anomalies in complex signals.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBode Plot Analysis\u003c\/strong\u003e — Automated frequency response measurement for characterizing power supply control loops and filter circuits.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e8-Inch Capacitive Touchscreen\u003c\/strong\u003e — Pinch, zoom, drag, and gesture navigation for efficient waveform interaction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeb Remote Control\u003c\/strong\u003e — Access the oscilloscope interface from any browser on the LAN — no software installation required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnectivity\u003c\/strong\u003e — USB, LAN, VGA, EXT trigger, AUX output.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eDeep Memory for Complete Signal Capture\u003c\/h3\u003e\n\u003cp\u003eWith 250 Mpts of memory depth, the oscilloscope maintains its full 2.5 GSa\/s sample rate across wide time base settings. This means you can capture an entire communication sequence, a full power-on cycle, or a long servo motor control loop without aliasing or missing events. Zoom into any portion of the captured record to examine details at full resolution.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-upo3502e-cap\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO3000-Capture.png\" alt=\"MSO3000E high-speed waveform capture\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003e200,000 wfms\/s capture rate reveals infrequent anomalies\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-upo3502e-cap\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO3000-Capture.png\" alt=\"MSO3000E high-speed waveform capture\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003e200,000 wfms\/s capture rate reveals infrequent anomalies\u003c\/span\u003e\n\u003c\/a\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eOptional Mixed-Signal Capability\u003c\/h3\u003e\n\u003cp\u003eThe UPO3000E platform supports 16 digital channels via the optional \u003ca href=\"\/products\/ut-m15\"\u003eUT-M15 logic probe pod\u003c\/a\u003e. Once connected, digital channels display alongside analog traces with full time correlation — the same mixed-signal debugging capability as the MSO models, added when you need it. Start with analog-only and upgrade to mixed-signal later without replacing the oscilloscope.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-upo3502e-la\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO3000-LAProbe.png\" alt=\"MSO3000E logic analyzer probe connection\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eLogic analyzer probe pod for digital bus visibility\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-upo3502e-la\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO3000-LAProbe.png\" alt=\"MSO3000E logic analyzer probe connection\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eLogic analyzer probe pod for digital bus visibility\u003c\/span\u003e\n\u003c\/a\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-upo3502e-trig\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO3000-AreaTrigger.png\" alt=\"MSO3000E area trigger function\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eArea trigger for isolating anomalies in complex signals\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003ch3\u003eAdvanced Triggering and Area Trigger\u003c\/h3\u003e\n\u003cp\u003eBeyond standard edge triggering, the MSO\/UPO3000E supports pulse width, slope, video, pattern, and timeout triggers for isolating specific signal conditions. The area trigger lets you draw a box on screen and trigger when a waveform enters or exits it — particularly effective for catching anomalies in signals where you know what the waveform should look like but not exactly when the fault will occur.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-upo3502e-trig\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO3000-AreaTrigger.png\" alt=\"MSO3000E area trigger function\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eArea trigger for isolating anomalies in complex signals\u003c\/span\u003e\n\u003c\/a\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eWeb-Based Remote Control\u003c\/h3\u003e\n\u003cp\u003eConnect the oscilloscope to your LAN and access the full interface from any web browser — no dedicated software installation required. Adjust settings, view waveforms, capture screenshots, and transfer data remotely. This is useful for rack-mounted test setups, shared lab instruments, or situations where the oscilloscope is physically difficult to access.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-upo3502e-web\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO3000-webcontrol.png\" alt=\"MSO3000E web-based remote control interface\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eWeb-based remote control from any browser on the LAN\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-upo3502e-web\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO3000-webcontrol.png\" alt=\"MSO3000E web-based remote control interface\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eWeb-based remote control from any browser on the LAN\u003c\/span\u003e\n\u003c\/a\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eApplications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEmbedded Systems Development\u003c\/strong\u003e — Debug microcontroller firmware with time-correlated analog and digital views. Decode SPI, I²C, UART, and CAN bus traffic alongside power rails and clock signals.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Electronics\u003c\/strong\u003e — Capture switching waveforms with deep memory, characterize control loop stability with Bode plot analysis, and trigger on specific voltage or timing conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEducation and Training\u003c\/strong\u003e — The touchscreen interface and automated measurements lower the barrier for students learning oscilloscope operation, while the advanced features support upper-level lab coursework.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturing and Quality\u003c\/strong\u003e — Automated measurements with pass\/fail limits, web remote control for rack-mounted setups, and data export for test documentation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eCan I add digital channels to the UPO3502E later?\u003c\/p\u003e\n\u003cp\u003eYes. The \u003ca href=\"\/products\/ut-m15\"\u003eUT-M15 logic probe pod\u003c\/a\u003e adds 16 digital channels to any UPO3000E-series oscilloscope. It connects to the logic analyzer port on the rear panel. You also need the \u003ca href=\"\/products\/upo3000cs-la16\"\u003eUPO3000CS\/E-LA16 software license\u003c\/a\u003e to enable the logic analyzer function.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eAre serial bus protocol decodes included?\u003c\/p\u003e\n\u003cp\u003eNo. Protocol decoding for RS-232, UART, I²C, SPI, CAN, CAN-FD, LIN, and FlexRay is available as optional software licenses. See the \u003ca href=\"\/collections\/mso3000e\"\u003eMSO\/UPO3000E series page\u003c\/a\u003e for available decode options.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eWhat is the difference between MSO and UPO models?\u003c\/p\u003e\n\u003cp\u003eMSO models include the 16-channel logic probe pod in the box. UPO models are the same oscilloscope without the logic pod — you can add it later with the \u003ca href=\"\/products\/ut-m15\"\u003eUT-M15\u003c\/a\u003e and \u003ca href=\"\/products\/upo3000cs-la16\"\u003eLA16 software license\u003c\/a\u003e. All other specifications are identical between MSO and UPO models at the same bandwidth and channel count.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eCan I upgrade the bandwidth later?\u003c\/p\u003e\n\u003cp\u003eNo. The bandwidth is fixed at the factory. Choose the bandwidth you need at purchase — 500 MHz for this model. The 500 MHz and 350 MHz models share the same chassis and feature set.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003cp\u003ePart of the \u003ca href=\"\/collections\/mso3000e\"\u003eMSO\/UPO3000E oscilloscope series\u003c\/a\u003e. All models share the same 2.5 GSa\/s sample rate, 250 Mpts memory, and measurement engine. See the \u003ca href=\"\/collections\/mso3000e\"\u003eseries comparison table\u003c\/a\u003e to find the right combination of bandwidth, channels, and accessories for your application.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"UNI-T","offers":[{"title":"Default Title","offer_id":46698028106012,"sku":"181100200041X","price":1863.2,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UPO3502E_Probes_8b4a3fbc-1882-490d-a7b6-8b43f6089586.jpg?v=1724188655"},{"product_id":"upo3354e","title":"UPO3354E 350 MHz 4Ch Oscilloscope (Logic Pod Optional)","description":"\u003ch1\u003eUPO3354E | 350 MHz 4Ch Oscilloscope (Logic Pod Optional)\u003c\/h1\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThe UPO3354E is a 350 MHz mixed signal oscilloscope with 4 analog channels. Digital channels available via optional \u003ca href=\"\/products\/ut-m15\"\u003eUT-M15 logic probe pod\u003c\/a\u003e. It samples at 2.5 GSa\/s with 250 Mpts memory depth and captures waveforms at up to 200,000 wfms\/s on an 8-inch capacitive touchscreen. All MSO\/UPO3000E-series instruments share the same platform — the same sample rate, memory, and measurement engine — with differences only in bandwidth, channel count, and included accessories.\u003c\/p\u003e\n\u003cp\u003eThe oscilloscope provides 36 automated measurements with statistics, advanced triggering (edge, pulse width, slope, video, pattern, and area trigger), Bode plot analysis for power supply loop characterization, and web-based remote control via LAN. Serial bus protocol decoding for RS-232, UART, I²C, SPI, CAN, CAN-FD, LIN, and FlexRay is available as optional software licenses.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-upo3354e-cap\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO3000-Capture.png\" alt=\"MSO3000E high-speed waveform capture\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003e200,000 wfms\/s capture rate reveals infrequent anomalies\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-upo3354e-mem\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO3000-Capture.png\" alt=\"MSO3000E high-speed waveform capture\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003e200,000 wfms\/s capture rate reveals infrequent anomalies\u003c\/span\u003e\n\u003c\/a\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cdiv class=\"product-key-features\"\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e350 MHz Bandwidth, 4 Analog Channels\u003c\/strong\u003e — Four-channel capture at up to 350 MHz for mixed-signal debugging and signal analysis.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2.5 GSa\/s Sample Rate\u003c\/strong\u003e — Captures fast edges and high-frequency content with accurate timing resolution.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e250 Mpts Memory Depth\u003c\/strong\u003e — Deep memory for capturing long signal records without reducing sample rate.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e200,000 wfms\/s Capture Rate\u003c\/strong\u003e — Fast acquisition reveals infrequent glitches, runts, and timing violations that slower scopes miss.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e16 Digital Channels (Optional)\u003c\/strong\u003e — Add mixed-signal capability with the \u003ca href=\"\/products\/ut-m15\"\u003eUT-M15 logic probe pod\u003c\/a\u003e (sold separately).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e36 Automated Measurements\u003c\/strong\u003e — Time, voltage, frequency, and statistical measurements with min\/max\/average\/standard deviation tracking.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eArea Trigger\u003c\/strong\u003e — Draw a region on screen and trigger when a waveform enters or exits it — effective for isolating anomalies in complex signals.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBode Plot Analysis\u003c\/strong\u003e — Automated frequency response measurement for characterizing power supply control loops and filter circuits.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e8-Inch Capacitive Touchscreen\u003c\/strong\u003e — Pinch, zoom, drag, and gesture navigation for efficient waveform interaction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeb Remote Control\u003c\/strong\u003e — Access the oscilloscope interface from any browser on the LAN — no software installation required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnectivity\u003c\/strong\u003e — USB, LAN, VGA, EXT trigger, AUX output.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eDeep Memory for Complete Signal Capture\u003c\/h3\u003e\n\u003cp\u003eWith 250 Mpts of memory depth, the oscilloscope maintains its full 2.5 GSa\/s sample rate across wide time base settings. This means you can capture an entire communication sequence, a full power-on cycle, or a long servo motor control loop without aliasing or missing events. Zoom into any portion of the captured record to examine details at full resolution.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-upo3354e-cap\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO3000-Capture.png\" alt=\"MSO3000E high-speed waveform capture\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003e200,000 wfms\/s capture rate reveals infrequent anomalies\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-upo3354e-cap\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO3000-Capture.png\" alt=\"MSO3000E high-speed waveform capture\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003e200,000 wfms\/s capture rate reveals infrequent anomalies\u003c\/span\u003e\n\u003c\/a\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eOptional Mixed-Signal Capability\u003c\/h3\u003e\n\u003cp\u003eThe UPO3000E platform supports 16 digital channels via the optional \u003ca href=\"\/products\/ut-m15\"\u003eUT-M15 logic probe pod\u003c\/a\u003e. Once connected, digital channels display alongside analog traces with full time correlation — the same mixed-signal debugging capability as the MSO models, added when you need it. Start with analog-only and upgrade to mixed-signal later without replacing the oscilloscope.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-upo3354e-la\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO3000-LAProbe.png\" alt=\"MSO3000E logic analyzer probe connection\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eLogic analyzer probe pod for digital bus visibility\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-upo3354e-la\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO3000-LAProbe.png\" alt=\"MSO3000E logic analyzer probe connection\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eLogic analyzer probe pod for digital bus visibility\u003c\/span\u003e\n\u003c\/a\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-upo3354e-trig\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO3000-AreaTrigger.png\" alt=\"MSO3000E area trigger function\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eArea trigger for isolating anomalies in complex signals\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003ch3\u003eAdvanced Triggering and Area Trigger\u003c\/h3\u003e\n\u003cp\u003eBeyond standard edge triggering, the MSO\/UPO3000E supports pulse width, slope, video, pattern, and timeout triggers for isolating specific signal conditions. The area trigger lets you draw a box on screen and trigger when a waveform enters or exits it — particularly effective for catching anomalies in signals where you know what the waveform should look like but not exactly when the fault will occur.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-upo3354e-trig\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO3000-AreaTrigger.png\" alt=\"MSO3000E area trigger function\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eArea trigger for isolating anomalies in complex signals\u003c\/span\u003e\n\u003c\/a\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eWeb-Based Remote Control\u003c\/h3\u003e\n\u003cp\u003eConnect the oscilloscope to your LAN and access the full interface from any web browser — no dedicated software installation required. Adjust settings, view waveforms, capture screenshots, and transfer data remotely. This is useful for rack-mounted test setups, shared lab instruments, or situations where the oscilloscope is physically difficult to access.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-upo3354e-web\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO3000-webcontrol.png\" alt=\"MSO3000E web-based remote control interface\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eWeb-based remote control from any browser on the LAN\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-upo3354e-web\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO3000-webcontrol.png\" alt=\"MSO3000E web-based remote control interface\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eWeb-based remote control from any browser on the LAN\u003c\/span\u003e\n\u003c\/a\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eApplications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEmbedded Systems Development\u003c\/strong\u003e — Debug microcontroller firmware with time-correlated analog and digital views. Decode SPI, I²C, UART, and CAN bus traffic alongside power rails and clock signals.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Electronics\u003c\/strong\u003e — Capture switching waveforms with deep memory, characterize control loop stability with Bode plot analysis, and trigger on specific voltage or timing conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-Channel Signal Analysis\u003c\/strong\u003e — Four analog channels for simultaneous capture of input, output, reference, and feedback signals in complex circuits.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEducation and Training\u003c\/strong\u003e — The touchscreen interface and automated measurements lower the barrier for students learning oscilloscope operation, while the advanced features support upper-level lab coursework.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturing and Quality\u003c\/strong\u003e — Automated measurements with pass\/fail limits, web remote control for rack-mounted setups, and data export for test documentation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eCan I add digital channels to the UPO3354E later?\u003c\/p\u003e\n\u003cp\u003eYes. The \u003ca href=\"\/products\/ut-m15\"\u003eUT-M15 logic probe pod\u003c\/a\u003e adds 16 digital channels to any UPO3000E-series oscilloscope. It connects to the logic analyzer port on the rear panel. You also need the \u003ca href=\"\/products\/upo3000cs-la16\"\u003eUPO3000CS\/E-LA16 software license\u003c\/a\u003e to enable the logic analyzer function.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eAre serial bus protocol decodes included?\u003c\/p\u003e\n\u003cp\u003eNo. Protocol decoding for RS-232, UART, I²C, SPI, CAN, CAN-FD, LIN, and FlexRay is available as optional software licenses. See the \u003ca href=\"\/collections\/mso3000e\"\u003eMSO\/UPO3000E series page\u003c\/a\u003e for available decode options.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eWhat is the difference between MSO and UPO models?\u003c\/p\u003e\n\u003cp\u003eMSO models include the 16-channel logic probe pod in the box. UPO models are the same oscilloscope without the logic pod — you can add it later with the \u003ca href=\"\/products\/ut-m15\"\u003eUT-M15\u003c\/a\u003e and \u003ca href=\"\/products\/upo3000cs-la16\"\u003eLA16 software license\u003c\/a\u003e. All other specifications are identical between MSO and UPO models at the same bandwidth and channel count.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eCan I upgrade the bandwidth later?\u003c\/p\u003e\n\u003cp\u003eNo. The bandwidth is fixed at the factory. Choose the bandwidth you need at purchase — 350 MHz for this model. The 500 MHz and 350 MHz models share the same chassis and feature set.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003cp\u003ePart of the \u003ca href=\"\/collections\/mso3000e\"\u003eMSO\/UPO3000E oscilloscope series\u003c\/a\u003e. All models share the same 2.5 GSa\/s sample rate, 250 Mpts memory, and measurement engine. See the \u003ca href=\"\/collections\/mso3000e\"\u003eseries comparison table\u003c\/a\u003e to find the right combination of bandwidth, channels, and accessories for your application.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"UNI-T","offers":[{"title":"Default Title","offer_id":46698033086748,"sku":"181100200037X","price":1439.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UPO3354E_Probes_59ecb31d-da4d-49cd-8f7b-25d803ce43e0.jpg?v=1724188655"},{"product_id":"upo3352e","title":"UPO3352E 350 MHz 2Ch Oscilloscope (Logic Pod Optional)","description":"\u003ch1\u003eUPO3352E | 350 MHz 2Ch Oscilloscope (Logic Pod Optional)\u003c\/h1\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThe UPO3352E is a 350 MHz mixed signal oscilloscope with 2 analog channels. Digital channels available via optional \u003ca href=\"\/products\/ut-m15\"\u003eUT-M15 logic probe pod\u003c\/a\u003e. It samples at 2.5 GSa\/s with 250 Mpts memory depth and captures waveforms at up to 200,000 wfms\/s on an 8-inch capacitive touchscreen. All MSO\/UPO3000E-series instruments share the same platform — the same sample rate, memory, and measurement engine — with differences only in bandwidth, channel count, and included accessories.\u003c\/p\u003e\n\u003cp\u003eThe oscilloscope provides 36 automated measurements with statistics, advanced triggering (edge, pulse width, slope, video, pattern, and area trigger), Bode plot analysis for power supply loop characterization, and web-based remote control via LAN. Serial bus protocol decoding for RS-232, UART, I²C, SPI, CAN, CAN-FD, LIN, and FlexRay is available as optional software licenses.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-upo3352e-cap\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO3000-Capture.png\" alt=\"MSO3000E high-speed waveform capture\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003e200,000 wfms\/s capture rate reveals infrequent anomalies\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-upo3352e-mem\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO3000-Capture.png\" alt=\"MSO3000E high-speed waveform capture\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003e200,000 wfms\/s capture rate reveals infrequent anomalies\u003c\/span\u003e\n\u003c\/a\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cdiv class=\"product-key-features\"\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e350 MHz Bandwidth, 2 Analog Channels\u003c\/strong\u003e — Two-channel capture at up to 350 MHz for mixed-signal debugging and signal analysis.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2.5 GSa\/s Sample Rate\u003c\/strong\u003e — Captures fast edges and high-frequency content with accurate timing resolution.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e250 Mpts Memory Depth\u003c\/strong\u003e — Deep memory for capturing long signal records without reducing sample rate.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e200,000 wfms\/s Capture Rate\u003c\/strong\u003e — Fast acquisition reveals infrequent glitches, runts, and timing violations that slower scopes miss.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e16 Digital Channels (Optional)\u003c\/strong\u003e — Add mixed-signal capability with the \u003ca href=\"\/products\/ut-m15\"\u003eUT-M15 logic probe pod\u003c\/a\u003e (sold separately).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e36 Automated Measurements\u003c\/strong\u003e — Time, voltage, frequency, and statistical measurements with min\/max\/average\/standard deviation tracking.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eArea Trigger\u003c\/strong\u003e — Draw a region on screen and trigger when a waveform enters or exits it — effective for isolating anomalies in complex signals.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBode Plot Analysis\u003c\/strong\u003e — Automated frequency response measurement for characterizing power supply control loops and filter circuits.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e8-Inch Capacitive Touchscreen\u003c\/strong\u003e — Pinch, zoom, drag, and gesture navigation for efficient waveform interaction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeb Remote Control\u003c\/strong\u003e — Access the oscilloscope interface from any browser on the LAN — no software installation required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnectivity\u003c\/strong\u003e — USB, LAN, VGA, EXT trigger, AUX output.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eDeep Memory for Complete Signal Capture\u003c\/h3\u003e\n\u003cp\u003eWith 250 Mpts of memory depth, the oscilloscope maintains its full 2.5 GSa\/s sample rate across wide time base settings. This means you can capture an entire communication sequence, a full power-on cycle, or a long servo motor control loop without aliasing or missing events. Zoom into any portion of the captured record to examine details at full resolution.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-upo3352e-cap\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO3000-Capture.png\" alt=\"MSO3000E high-speed waveform capture\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003e200,000 wfms\/s capture rate reveals infrequent anomalies\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-upo3352e-cap\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO3000-Capture.png\" alt=\"MSO3000E high-speed waveform capture\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003e200,000 wfms\/s capture rate reveals infrequent anomalies\u003c\/span\u003e\n\u003c\/a\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eOptional Mixed-Signal Capability\u003c\/h3\u003e\n\u003cp\u003eThe UPO3000E platform supports 16 digital channels via the optional \u003ca href=\"\/products\/ut-m15\"\u003eUT-M15 logic probe pod\u003c\/a\u003e. Once connected, digital channels display alongside analog traces with full time correlation — the same mixed-signal debugging capability as the MSO models, added when you need it. Start with analog-only and upgrade to mixed-signal later without replacing the oscilloscope.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-upo3352e-la\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO3000-LAProbe.png\" alt=\"MSO3000E logic analyzer probe connection\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eLogic analyzer probe pod for digital bus visibility\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-upo3352e-la\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO3000-LAProbe.png\" alt=\"MSO3000E logic analyzer probe connection\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eLogic analyzer probe pod for digital bus visibility\u003c\/span\u003e\n\u003c\/a\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-upo3352e-trig\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO3000-AreaTrigger.png\" alt=\"MSO3000E area trigger function\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eArea trigger for isolating anomalies in complex signals\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003ch3\u003eAdvanced Triggering and Area Trigger\u003c\/h3\u003e\n\u003cp\u003eBeyond standard edge triggering, the MSO\/UPO3000E supports pulse width, slope, video, pattern, and timeout triggers for isolating specific signal conditions. The area trigger lets you draw a box on screen and trigger when a waveform enters or exits it — particularly effective for catching anomalies in signals where you know what the waveform should look like but not exactly when the fault will occur.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-upo3352e-trig\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO3000-AreaTrigger.png\" alt=\"MSO3000E area trigger function\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eArea trigger for isolating anomalies in complex signals\u003c\/span\u003e\n\u003c\/a\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eWeb-Based Remote Control\u003c\/h3\u003e\n\u003cp\u003eConnect the oscilloscope to your LAN and access the full interface from any web browser — no dedicated software installation required. Adjust settings, view waveforms, capture screenshots, and transfer data remotely. This is useful for rack-mounted test setups, shared lab instruments, or situations where the oscilloscope is physically difficult to access.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-upo3352e-web\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO3000-webcontrol.png\" alt=\"MSO3000E web-based remote control interface\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eWeb-based remote control from any browser on the LAN\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-upo3352e-web\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO3000-webcontrol.png\" alt=\"MSO3000E web-based remote control interface\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eWeb-based remote control from any browser on the LAN\u003c\/span\u003e\n\u003c\/a\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eApplications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEmbedded Systems Development\u003c\/strong\u003e — Debug microcontroller firmware with time-correlated analog and digital views. Decode SPI, I²C, UART, and CAN bus traffic alongside power rails and clock signals.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Electronics\u003c\/strong\u003e — Capture switching waveforms with deep memory, characterize control loop stability with Bode plot analysis, and trigger on specific voltage or timing conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEducation and Training\u003c\/strong\u003e — The touchscreen interface and automated measurements lower the barrier for students learning oscilloscope operation, while the advanced features support upper-level lab coursework.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturing and Quality\u003c\/strong\u003e — Automated measurements with pass\/fail limits, web remote control for rack-mounted setups, and data export for test documentation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eCan I add digital channels to the UPO3352E later?\u003c\/p\u003e\n\u003cp\u003eYes. The \u003ca href=\"\/products\/ut-m15\"\u003eUT-M15 logic probe pod\u003c\/a\u003e adds 16 digital channels to any UPO3000E-series oscilloscope. It connects to the logic analyzer port on the rear panel. You also need the \u003ca href=\"\/products\/upo3000cs-la16\"\u003eUPO3000CS\/E-LA16 software license\u003c\/a\u003e to enable the logic analyzer function.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eAre serial bus protocol decodes included?\u003c\/p\u003e\n\u003cp\u003eNo. Protocol decoding for RS-232, UART, I²C, SPI, CAN, CAN-FD, LIN, and FlexRay is available as optional software licenses. See the \u003ca href=\"\/collections\/mso3000e\"\u003eMSO\/UPO3000E series page\u003c\/a\u003e for available decode options.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eWhat is the difference between MSO and UPO models?\u003c\/p\u003e\n\u003cp\u003eMSO models include the 16-channel logic probe pod in the box. UPO models are the same oscilloscope without the logic pod — you can add it later with the \u003ca href=\"\/products\/ut-m15\"\u003eUT-M15\u003c\/a\u003e and \u003ca href=\"\/products\/upo3000cs-la16\"\u003eLA16 software license\u003c\/a\u003e. All other specifications are identical between MSO and UPO models at the same bandwidth and channel count.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eCan I upgrade the bandwidth later?\u003c\/p\u003e\n\u003cp\u003eNo. The bandwidth is fixed at the factory. Choose the bandwidth you need at purchase — 350 MHz for this model. The 500 MHz and 350 MHz models share the same chassis and feature set.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003cp\u003ePart of the \u003ca href=\"\/collections\/mso3000e\"\u003eMSO\/UPO3000E oscilloscope series\u003c\/a\u003e. All models share the same 2.5 GSa\/s sample rate, 250 Mpts memory, and measurement engine. See the \u003ca href=\"\/collections\/mso3000e\"\u003eseries comparison table\u003c\/a\u003e to find the right combination of bandwidth, channels, and accessories for your application.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"UNI-T","offers":[{"title":"Default Title","offer_id":46698048684316,"sku":"181100200038X","price":1199.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UPO3352E_Probes_8ac1a3fc-67c1-4c18-8f78-7390d4ca047d.jpg?v=1724188593"},{"product_id":"mso2204-s","title":"MSO2204-S 200 MHz 4+16Ch Mixed Signal Oscilloscope with Signal Generator","description":"\u003ch1\u003eMSO2204-S | 200 MHz 4+16Ch Mixed Signal Oscilloscope with Signal Generator\u003c\/h1\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThe MSO2204 is a 200 MHz mixed signal oscilloscope with 4 analog channels and 16 digital channels (logic analyzer included). It samples at 2.0 GSa\/s with 56 Mpts memory depth and captures waveforms at up to 1,000,000 wfms\/s — one of the fastest capture rates in its class — on an 8-inch capacitive touchscreen. A built-in 50 MHz arbitrary waveform generator provides stimulus signals for closed-loop testing and enables Bode plot analysis.\u003c\/p\u003e\n\u003cp\u003eThe oscilloscope provides 36 automated measurements with statistics, advanced triggering (edge, pulse width, slope, video, pattern, and area trigger), FFT spectrum analysis, and web-based remote control via LAN. Serial bus protocol decoding for RS-232, UART, I²C, SPI, CAN, CAN-FD, LIN, and FlexRay is available as optional software licenses.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cdiv class=\"product-key-features\"\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e200 MHz Bandwidth, 4 Analog Channels\u003c\/strong\u003e — Four-channel capture at up to 200 MHz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2.0 GSa\/s Sample Rate\u003c\/strong\u003e — Captures fast edges and high-frequency content with accurate timing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e56 Mpts Memory Depth\u003c\/strong\u003e — Extended capture without reducing sample rate.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1,000,000 wfms\/s Capture Rate\u003c\/strong\u003e — High acquisition speed reveals rare glitches, runts, and timing violations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e16 Digital Channels Included\u003c\/strong\u003e — Mixed-signal debugging with time-correlated analog and digital views. Logic probe pod included.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt-In 50 MHz Signal Generator\u003c\/strong\u003e — Stimulus-response testing and Bode plot analysis without external equipment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e36 Automated Measurements\u003c\/strong\u003e — Time, voltage, frequency, and statistical measurements with real-time tracking.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eArea Trigger\u003c\/strong\u003e — Draw a region on screen to trigger on waveform anomalies.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFFT Spectrum Analysis\u003c\/strong\u003e — Frequency domain analysis for harmonics, EMI, and spectral characterization.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e8-Inch Capacitive Touchscreen\u003c\/strong\u003e — Pinch, zoom, and drag for efficient waveform navigation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeb Remote Control\u003c\/strong\u003e — Browser-based access from any device on the LAN.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnectivity\u003c\/strong\u003e — USB, LAN, VGA, EXT trigger, AUX output.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eBuilt-In Signal Generator\u003c\/h3\u003e\n\u003cp\u003eThe 50 MHz arbitrary waveform generator outputs sine, square, ramp, pulse, noise, and user-defined waveforms directly from the oscilloscope. Use it to inject test signals into a circuit and capture the response simultaneously — ideal for characterizing filters, amplifiers, and feedback loops without a separate signal source.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-mso2204s-awg\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO2000-AWG.png\" alt=\"MSO2000 built-in signal generator\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eBuilt-in 50 MHz arbitrary waveform generator\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-mso2204s-awg\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO2000-AWG.png\" alt=\"MSO2000 built-in signal generator\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eBuilt-in 50 MHz arbitrary waveform generator\u003c\/span\u003e\n\u003c\/a\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-mso2204s-bode\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO2000-Bode.png\" alt=\"MSO2000 Bode plot analysis\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eBode plot analysis for control loop characterization\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003ch3\u003eBode Plot for Loop Analysis\u003c\/h3\u003e\n\u003cp\u003eThe Bode plot function sweeps the built-in signal generator across a frequency range while measuring gain and phase. The result is a frequency response plot displayed directly on screen — essential for characterizing power supply feedback loops, verifying filter rolloff, and measuring amplifier bandwidth.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-mso2204s-bode\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO2000-Bode.png\" alt=\"MSO2000 Bode plot analysis\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eBode plot analysis for control loop characterization\u003c\/span\u003e\n\u003c\/a\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eMixed-Signal Debugging\u003c\/h3\u003e\n\u003cp\u003eThe 16 digital channels display alongside analog traces with full time correlation. See bus activity and analog behavior on the same time axis — critical for debugging embedded systems where a protocol command triggers an analog response. Logic probe pod included.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-mso2204s-la\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO2000-LAScreen.png\" alt=\"MSO2000 16-channel logic analyzer\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003e16-channel logic analyzer correlated with analog traces\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-mso2204s-la\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO2000-LAScreen.png\" alt=\"MSO2000 16-channel logic analyzer\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003e16-channel logic analyzer correlated with analog traces\u003c\/span\u003e\n\u003c\/a\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-mso2204s-fft\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO2000-FFT.png\" alt=\"MSO2000 FFT spectrum analysis\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eFFT analysis for frequency domain signal characterization\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003ch3\u003eFFT Spectrum Analysis\u003c\/h3\u003e\n\u003cp\u003eThe built-in FFT converts time-domain waveforms to the frequency domain for identifying harmonics, EMI, clock spurs, and other spectral components. Combined with the 1,000,000 wfms\/s capture rate, this helps characterize both time and frequency behavior of complex signals.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-mso2204s-fft\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO2000-FFT.png\" alt=\"MSO2000 FFT spectrum analysis\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eFFT analysis for frequency domain signal characterization\u003c\/span\u003e\n\u003c\/a\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eAdvanced Triggering\u003c\/h3\u003e\n\u003cp\u003eBeyond standard edge triggering, the MSO\/UPO2000 supports pulse width, slope, video, pattern, timeout, and area triggers. The area trigger lets you draw a region on screen and trigger when a waveform enters or exits it — effective for catching anomalies in signals where you know the expected shape.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-mso2204s-trig\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO2000-Triggers.png\" alt=\"MSO2000 advanced trigger types\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eAdvanced trigger types for isolating specific signal conditions\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-mso2204s-trig\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO2000-Triggers.png\" alt=\"MSO2000 advanced trigger types\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eAdvanced trigger types for isolating specific signal conditions\u003c\/span\u003e\n\u003c\/a\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eApplications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEmbedded Systems Development\u003c\/strong\u003e — Debug firmware with time-correlated analog and digital views. Decode SPI, I²C, UART, and CAN bus traffic alongside power rails and clock signals.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Electronics\u003c\/strong\u003e — Capture switching waveforms with deep memory, trigger on specific conditions, and use FFT to characterize switching noise and harmonics.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-Channel Signal Analysis\u003c\/strong\u003e — Four analog channels for simultaneous capture of input, output, reference, and feedback signals.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEducation and Training\u003c\/strong\u003e — Touchscreen interface and automated measurements for teaching labs, with advanced features for upper-level coursework.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturing and Quality\u003c\/strong\u003e — Fast capture rate catches intermittent failures that slower scopes miss. Web remote control for rack-mounted setups.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eAre serial bus protocol decodes included?\u003c\/p\u003e\n\u003cp\u003eNo. Protocol decoding for RS-232, UART, I²C, SPI, CAN, CAN-FD, LIN, and FlexRay is available as optional software licenses. See the \u003ca href=\"\/collections\/mso-upo2000e\"\u003eMSO\/UPO2000 series page\u003c\/a\u003e for available decode options.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eWhat waveforms can the built-in signal generator produce?\u003c\/p\u003e\n\u003cp\u003eThe -S models include a 50 MHz arbitrary waveform generator outputting sine, square, ramp, pulse, noise, DC, and user-defined waveforms. It also enables the Bode plot function for automated frequency response measurement.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eWhat is the difference between MSO and UPO models?\u003c\/p\u003e\n\u003cp\u003eMSO models include the 16-channel logic probe pod. UPO models are the same oscilloscope without the logic pod — add it later with the \u003ca href=\"\/products\/ut-m15\"\u003eUT-M15\u003c\/a\u003e and \u003ca href=\"\/products\/upo2000-la16\"\u003eLA16 software license\u003c\/a\u003e. All other specifications are identical.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eWhat makes the 1,000,000 wfms\/s capture rate significant?\u003c\/p\u003e\n\u003cp\u003eA faster capture rate means the oscilloscope acquires more waveforms per second, increasing the probability of catching rare events like glitches, runts, or timing violations. At 1,000,000 wfms\/s, the MSO\/UPO2000 captures anomalies that scopes with 10,000–100,000 wfms\/s would likely miss.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003cp\u003ePart of the \u003ca href=\"\/collections\/mso-upo2000e\"\u003eMSO\/UPO2000 oscilloscope series\u003c\/a\u003e. All models share the same 2.0 GSa\/s sample rate, 56 Mpts memory, and 1,000,000 wfms\/s capture engine. See the \u003ca href=\"\/collections\/mso-upo2000e\"\u003eseries comparison table\u003c\/a\u003e to find the right combination of bandwidth, channels, and accessories.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"UNI-T","offers":[{"title":"Default Title","offer_id":46698065789212,"sku":"181100300026X","price":1231.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/MSO2204-S_Probes.jpg?v=1720807195"},{"product_id":"mso2104-s","title":"MSO2104-S 100 MHz 4+16Ch Mixed Signal Oscilloscope with Signal Generator","description":"\u003ch1\u003eMSO2104-S | 100 MHz 4+16Ch Mixed Signal Oscilloscope with Signal Generator\u003c\/h1\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThe MSO2104 is a 100 MHz mixed signal oscilloscope with 4 analog channels and 16 digital channels (logic analyzer included). It samples at 2.0 GSa\/s with 56 Mpts memory depth and captures waveforms at up to 1,000,000 wfms\/s — one of the fastest capture rates in its class — on an 8-inch capacitive touchscreen. A built-in 50 MHz arbitrary waveform generator provides stimulus signals for closed-loop testing and enables Bode plot analysis.\u003c\/p\u003e\n\u003cp\u003eThe oscilloscope provides 36 automated measurements with statistics, advanced triggering (edge, pulse width, slope, video, pattern, and area trigger), FFT spectrum analysis, and web-based remote control via LAN. Serial bus protocol decoding for RS-232, UART, I²C, SPI, CAN, CAN-FD, LIN, and FlexRay is available as optional software licenses.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cdiv class=\"product-key-features\"\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e100 MHz Bandwidth, 4 Analog Channels\u003c\/strong\u003e — Four-channel capture at up to 100 MHz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2.0 GSa\/s Sample Rate\u003c\/strong\u003e — Captures fast edges and high-frequency content with accurate timing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e56 Mpts Memory Depth\u003c\/strong\u003e — Extended capture without reducing sample rate.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1,000,000 wfms\/s Capture Rate\u003c\/strong\u003e — High acquisition speed reveals rare glitches, runts, and timing violations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e16 Digital Channels Included\u003c\/strong\u003e — Mixed-signal debugging with time-correlated analog and digital views. Logic probe pod included.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt-In 50 MHz Signal Generator\u003c\/strong\u003e — Stimulus-response testing and Bode plot analysis without external equipment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e36 Automated Measurements\u003c\/strong\u003e — Time, voltage, frequency, and statistical measurements with real-time tracking.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eArea Trigger\u003c\/strong\u003e — Draw a region on screen to trigger on waveform anomalies.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFFT Spectrum Analysis\u003c\/strong\u003e — Frequency domain analysis for harmonics, EMI, and spectral characterization.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e8-Inch Capacitive Touchscreen\u003c\/strong\u003e — Pinch, zoom, and drag for efficient waveform navigation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeb Remote Control\u003c\/strong\u003e — Browser-based access from any device on the LAN.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnectivity\u003c\/strong\u003e — USB, LAN, VGA, EXT trigger, AUX output.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eBuilt-In Signal Generator\u003c\/h3\u003e\n\u003cp\u003eThe 50 MHz arbitrary waveform generator outputs sine, square, ramp, pulse, noise, and user-defined waveforms directly from the oscilloscope. Use it to inject test signals into a circuit and capture the response simultaneously — ideal for characterizing filters, amplifiers, and feedback loops without a separate signal source.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-mso2104s-awg\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO2000-AWG.png\" alt=\"MSO2000 built-in signal generator\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eBuilt-in 50 MHz arbitrary waveform generator\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-mso2104s-awg\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO2000-AWG.png\" alt=\"MSO2000 built-in signal generator\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eBuilt-in 50 MHz arbitrary waveform generator\u003c\/span\u003e\n\u003c\/a\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-mso2104s-bode\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO2000-Bode.png\" alt=\"MSO2000 Bode plot analysis\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eBode plot analysis for control loop characterization\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003ch3\u003eBode Plot for Loop Analysis\u003c\/h3\u003e\n\u003cp\u003eThe Bode plot function sweeps the built-in signal generator across a frequency range while measuring gain and phase. The result is a frequency response plot displayed directly on screen — essential for characterizing power supply feedback loops, verifying filter rolloff, and measuring amplifier bandwidth.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-mso2104s-bode\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO2000-Bode.png\" alt=\"MSO2000 Bode plot analysis\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eBode plot analysis for control loop characterization\u003c\/span\u003e\n\u003c\/a\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eMixed-Signal Debugging\u003c\/h3\u003e\n\u003cp\u003eThe 16 digital channels display alongside analog traces with full time correlation. See bus activity and analog behavior on the same time axis — critical for debugging embedded systems where a protocol command triggers an analog response. Logic probe pod included.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-mso2104s-la\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO2000-LAScreen.png\" alt=\"MSO2000 16-channel logic analyzer\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003e16-channel logic analyzer correlated with analog traces\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-mso2104s-la\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO2000-LAScreen.png\" alt=\"MSO2000 16-channel logic analyzer\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003e16-channel logic analyzer correlated with analog traces\u003c\/span\u003e\n\u003c\/a\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-mso2104s-fft\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO2000-FFT.png\" alt=\"MSO2000 FFT spectrum analysis\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eFFT analysis for frequency domain signal characterization\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003ch3\u003eFFT Spectrum Analysis\u003c\/h3\u003e\n\u003cp\u003eThe built-in FFT converts time-domain waveforms to the frequency domain for identifying harmonics, EMI, clock spurs, and other spectral components. Combined with the 1,000,000 wfms\/s capture rate, this helps characterize both time and frequency behavior of complex signals.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-mso2104s-fft\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO2000-FFT.png\" alt=\"MSO2000 FFT spectrum analysis\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eFFT analysis for frequency domain signal characterization\u003c\/span\u003e\n\u003c\/a\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eAdvanced Triggering\u003c\/h3\u003e\n\u003cp\u003eBeyond standard edge triggering, the MSO\/UPO2000 supports pulse width, slope, video, pattern, timeout, and area triggers. The area trigger lets you draw a region on screen and trigger when a waveform enters or exits it — effective for catching anomalies in signals where you know the expected shape.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-mso2104s-trig\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO2000-Triggers.png\" alt=\"MSO2000 advanced trigger types\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eAdvanced trigger types for isolating specific signal conditions\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-mso2104s-trig\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO2000-Triggers.png\" alt=\"MSO2000 advanced trigger types\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eAdvanced trigger types for isolating specific signal conditions\u003c\/span\u003e\n\u003c\/a\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eApplications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEmbedded Systems Development\u003c\/strong\u003e — Debug firmware with time-correlated analog and digital views. Decode SPI, I²C, UART, and CAN bus traffic alongside power rails and clock signals.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Electronics\u003c\/strong\u003e — Capture switching waveforms with deep memory, trigger on specific conditions, and use FFT to characterize switching noise and harmonics.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-Channel Signal Analysis\u003c\/strong\u003e — Four analog channels for simultaneous capture of input, output, reference, and feedback signals.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEducation and Training\u003c\/strong\u003e — Touchscreen interface and automated measurements for teaching labs, with advanced features for upper-level coursework.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturing and Quality\u003c\/strong\u003e — Fast capture rate catches intermittent failures that slower scopes miss. Web remote control for rack-mounted setups.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eAre serial bus protocol decodes included?\u003c\/p\u003e\n\u003cp\u003eNo. Protocol decoding for RS-232, UART, I²C, SPI, CAN, CAN-FD, LIN, and FlexRay is available as optional software licenses. See the \u003ca href=\"\/collections\/mso-upo2000e\"\u003eMSO\/UPO2000 series page\u003c\/a\u003e for available decode options.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eWhat waveforms can the built-in signal generator produce?\u003c\/p\u003e\n\u003cp\u003eThe -S models include a 50 MHz arbitrary waveform generator outputting sine, square, ramp, pulse, noise, DC, and user-defined waveforms. It also enables the Bode plot function for automated frequency response measurement.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eWhat is the difference between MSO and UPO models?\u003c\/p\u003e\n\u003cp\u003eMSO models include the 16-channel logic probe pod. UPO models are the same oscilloscope without the logic pod — add it later with the \u003ca href=\"\/products\/ut-m15\"\u003eUT-M15\u003c\/a\u003e and \u003ca href=\"\/products\/upo2000-la16\"\u003eLA16 software license\u003c\/a\u003e. All other specifications are identical.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eWhat makes the 1,000,000 wfms\/s capture rate significant?\u003c\/p\u003e\n\u003cp\u003eA faster capture rate means the oscilloscope acquires more waveforms per second, increasing the probability of catching rare events like glitches, runts, or timing violations. At 1,000,000 wfms\/s, the MSO\/UPO2000 captures anomalies that scopes with 10,000–100,000 wfms\/s would likely miss.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003cp\u003ePart of the \u003ca href=\"\/collections\/mso-upo2000e\"\u003eMSO\/UPO2000 oscilloscope series\u003c\/a\u003e. All models share the same 2.0 GSa\/s sample rate, 56 Mpts memory, and 1,000,000 wfms\/s capture engine. See the \u003ca href=\"\/collections\/mso-upo2000e\"\u003eseries comparison table\u003c\/a\u003e to find the right combination of bandwidth, channels, and accessories.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"UNI-T","offers":[{"title":"Default Title","offer_id":46698105209116,"sku":"181100300040X","price":1119.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/MSO2104-S_Probes.jpg?v=1720807204"},{"product_id":"mso2204","title":"MSO2204 200 MHz 4+16Ch Mixed Signal Oscilloscope","description":"\u003ch1\u003eMSO2204 | 200 MHz 4+16Ch Mixed Signal Oscilloscope\u003c\/h1\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThe MSO2204 is a 200 MHz mixed signal oscilloscope with 4 analog channels and 16 digital channels (logic analyzer included). It samples at 2.0 GSa\/s with 56 Mpts memory depth and captures waveforms at up to 1,000,000 wfms\/s — one of the fastest capture rates in its class — on an 8-inch capacitive touchscreen.\u003c\/p\u003e\n\u003cp\u003eThe oscilloscope provides 36 automated measurements with statistics, advanced triggering (edge, pulse width, slope, video, pattern, and area trigger), FFT spectrum analysis, and web-based remote control via LAN. Serial bus protocol decoding for RS-232, UART, I²C, SPI, CAN, CAN-FD, LIN, and FlexRay is available as optional software licenses.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cdiv class=\"product-key-features\"\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e200 MHz Bandwidth, 4 Analog Channels\u003c\/strong\u003e — Four-channel capture at up to 200 MHz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2.0 GSa\/s Sample Rate\u003c\/strong\u003e — Captures fast edges and high-frequency content with accurate timing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e56 Mpts Memory Depth\u003c\/strong\u003e — Extended capture without reducing sample rate.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1,000,000 wfms\/s Capture Rate\u003c\/strong\u003e — High acquisition speed reveals rare glitches, runts, and timing violations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e16 Digital Channels Included\u003c\/strong\u003e — Mixed-signal debugging with time-correlated analog and digital views. Logic probe pod included.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e36 Automated Measurements\u003c\/strong\u003e — Time, voltage, frequency, and statistical measurements with real-time tracking.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eArea Trigger\u003c\/strong\u003e — Draw a region on screen to trigger on waveform anomalies.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFFT Spectrum Analysis\u003c\/strong\u003e — Frequency domain analysis for harmonics, EMI, and spectral characterization.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e8-Inch Capacitive Touchscreen\u003c\/strong\u003e — Pinch, zoom, and drag for efficient waveform navigation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeb Remote Control\u003c\/strong\u003e — Browser-based access from any device on the LAN.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnectivity\u003c\/strong\u003e — USB, LAN, VGA, EXT trigger, AUX output.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eMixed-Signal Debugging\u003c\/h3\u003e\n\u003cp\u003eThe 16 digital channels display alongside analog traces with full time correlation. See bus activity and analog behavior on the same time axis — critical for debugging embedded systems where a protocol command triggers an analog response. Logic probe pod included.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-mso2204-la\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO2000-LAScreen.png\" alt=\"MSO2000 16-channel logic analyzer\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003e16-channel logic analyzer correlated with analog traces\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-mso2204-la\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO2000-LAScreen.png\" alt=\"MSO2000 16-channel logic analyzer\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003e16-channel logic analyzer correlated with analog traces\u003c\/span\u003e\n\u003c\/a\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-mso2204-fft\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO2000-FFT.png\" alt=\"MSO2000 FFT spectrum analysis\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eFFT analysis for frequency domain signal characterization\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003ch3\u003eFFT Spectrum Analysis\u003c\/h3\u003e\n\u003cp\u003eThe built-in FFT converts time-domain waveforms to the frequency domain for identifying harmonics, EMI, clock spurs, and other spectral components. Combined with the 1,000,000 wfms\/s capture rate, this helps characterize both time and frequency behavior of complex signals.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-mso2204-fft\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO2000-FFT.png\" alt=\"MSO2000 FFT spectrum analysis\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eFFT analysis for frequency domain signal characterization\u003c\/span\u003e\n\u003c\/a\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eAdvanced Triggering\u003c\/h3\u003e\n\u003cp\u003eBeyond standard edge triggering, the MSO\/UPO2000 supports pulse width, slope, video, pattern, timeout, and area triggers. The area trigger lets you draw a region on screen and trigger when a waveform enters or exits it — effective for catching anomalies in signals where you know the expected shape.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-mso2204-trig\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO2000-Triggers.png\" alt=\"MSO2000 advanced trigger types\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eAdvanced trigger types for isolating specific signal conditions\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-mso2204-trig\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO2000-Triggers.png\" alt=\"MSO2000 advanced trigger types\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eAdvanced trigger types for isolating specific signal conditions\u003c\/span\u003e\n\u003c\/a\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-mso2204-mem\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO2000-Mem.png\" alt=\"MSO2000 56 Mpts memory depth\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003e56 Mpts memory depth for extended signal capture\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003ch3\u003eDeep Memory Capture\u003c\/h3\u003e\n\u003cp\u003eWith 56 Mpts of memory, the oscilloscope maintains high sample rates across wide time base settings. Capture complete communication sequences, power-on cycles, or slow mechanical processes without aliasing. Zoom into any portion of the record to examine details at full resolution.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-mso2204-mem\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO2000-Mem.png\" alt=\"MSO2000 56 Mpts memory depth\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003e56 Mpts memory depth for extended signal capture\u003c\/span\u003e\n\u003c\/a\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eApplications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEmbedded Systems Development\u003c\/strong\u003e — Debug firmware with time-correlated analog and digital views. Decode SPI, I²C, UART, and CAN bus traffic alongside power rails and clock signals.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Electronics\u003c\/strong\u003e — Capture switching waveforms with deep memory, trigger on specific conditions, and use FFT to characterize switching noise and harmonics.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-Channel Signal Analysis\u003c\/strong\u003e — Four analog channels for simultaneous capture of input, output, reference, and feedback signals.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEducation and Training\u003c\/strong\u003e — Touchscreen interface and automated measurements for teaching labs, with advanced features for upper-level coursework.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturing and Quality\u003c\/strong\u003e — Fast capture rate catches intermittent failures that slower scopes miss. Web remote control for rack-mounted setups.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eAre serial bus protocol decodes included?\u003c\/p\u003e\n\u003cp\u003eNo. Protocol decoding for RS-232, UART, I²C, SPI, CAN, CAN-FD, LIN, and FlexRay is available as optional software licenses. See the \u003ca href=\"\/collections\/mso-upo2000e\"\u003eMSO\/UPO2000 series page\u003c\/a\u003e for available decode options.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eWhat is the difference between MSO and UPO models?\u003c\/p\u003e\n\u003cp\u003eMSO models include the 16-channel logic probe pod. UPO models are the same oscilloscope without the logic pod — add it later with the \u003ca href=\"\/products\/ut-m15\"\u003eUT-M15\u003c\/a\u003e and \u003ca href=\"\/products\/upo2000-la16\"\u003eLA16 software license\u003c\/a\u003e. All other specifications are identical.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eWhat makes the 1,000,000 wfms\/s capture rate significant?\u003c\/p\u003e\n\u003cp\u003eA faster capture rate means the oscilloscope acquires more waveforms per second, increasing the probability of catching rare events like glitches, runts, or timing violations. At 1,000,000 wfms\/s, the MSO\/UPO2000 captures anomalies that scopes with 10,000–100,000 wfms\/s would likely miss.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003cp\u003ePart of the \u003ca href=\"\/collections\/mso-upo2000e\"\u003eMSO\/UPO2000 oscilloscope series\u003c\/a\u003e. All models share the same 2.0 GSa\/s sample rate, 56 Mpts memory, and 1,000,000 wfms\/s capture engine. See the \u003ca href=\"\/collections\/mso-upo2000e\"\u003eseries comparison table\u003c\/a\u003e to find the right combination of bandwidth, channels, and accessories.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"UNI-T","offers":[{"title":"Default Title","offer_id":46698153967900,"sku":"181100300044X","price":1091.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/MSO2204_Probes.jpg?v=1720807213"},{"product_id":"mso2202-s","title":"MSO2202-S 200 MHz 2+16Ch Mixed Signal Oscilloscope with Signal Generator","description":"\u003ch1\u003eMSO2202-S | 200 MHz 2+16Ch Mixed Signal Oscilloscope with Signal Generator\u003c\/h1\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThe MSO2202 is a 200 MHz mixed signal oscilloscope with 2 analog channels and 16 digital channels (logic analyzer included). It samples at 2.0 GSa\/s with 56 Mpts memory depth and captures waveforms at up to 1,000,000 wfms\/s — one of the fastest capture rates in its class — on an 8-inch capacitive touchscreen. A built-in 50 MHz arbitrary waveform generator provides stimulus signals for closed-loop testing and enables Bode plot analysis.\u003c\/p\u003e\n\u003cp\u003eThe oscilloscope provides 36 automated measurements with statistics, advanced triggering (edge, pulse width, slope, video, pattern, and area trigger), FFT spectrum analysis, and web-based remote control via LAN. Serial bus protocol decoding for RS-232, UART, I²C, SPI, CAN, CAN-FD, LIN, and FlexRay is available as optional software licenses.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cdiv class=\"product-key-features\"\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e200 MHz Bandwidth, 2 Analog Channels\u003c\/strong\u003e — Two-channel capture at up to 200 MHz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2.0 GSa\/s Sample Rate\u003c\/strong\u003e — Captures fast edges and high-frequency content with accurate timing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e56 Mpts Memory Depth\u003c\/strong\u003e — Extended capture without reducing sample rate.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1,000,000 wfms\/s Capture Rate\u003c\/strong\u003e — High acquisition speed reveals rare glitches, runts, and timing violations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e16 Digital Channels Included\u003c\/strong\u003e — Mixed-signal debugging with time-correlated analog and digital views. Logic probe pod included.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt-In 50 MHz Signal Generator\u003c\/strong\u003e — Stimulus-response testing and Bode plot analysis without external equipment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e36 Automated Measurements\u003c\/strong\u003e — Time, voltage, frequency, and statistical measurements with real-time tracking.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eArea Trigger\u003c\/strong\u003e — Draw a region on screen to trigger on waveform anomalies.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFFT Spectrum Analysis\u003c\/strong\u003e — Frequency domain analysis for harmonics, EMI, and spectral characterization.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e8-Inch Capacitive Touchscreen\u003c\/strong\u003e — Pinch, zoom, and drag for efficient waveform navigation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeb Remote Control\u003c\/strong\u003e — Browser-based access from any device on the LAN.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnectivity\u003c\/strong\u003e — USB, LAN, VGA, EXT trigger, AUX output.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eBuilt-In Signal Generator\u003c\/h3\u003e\n\u003cp\u003eThe 50 MHz arbitrary waveform generator outputs sine, square, ramp, pulse, noise, and user-defined waveforms directly from the oscilloscope. Use it to inject test signals into a circuit and capture the response simultaneously — ideal for characterizing filters, amplifiers, and feedback loops without a separate signal source.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-mso2202s-awg\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO2000-AWG.png\" alt=\"MSO2000 built-in signal generator\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eBuilt-in 50 MHz arbitrary waveform generator\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-mso2202s-awg\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO2000-AWG.png\" alt=\"MSO2000 built-in signal generator\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eBuilt-in 50 MHz arbitrary waveform generator\u003c\/span\u003e\n\u003c\/a\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-mso2202s-bode\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO2000-Bode.png\" alt=\"MSO2000 Bode plot analysis\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eBode plot analysis for control loop characterization\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003ch3\u003eBode Plot for Loop Analysis\u003c\/h3\u003e\n\u003cp\u003eThe Bode plot function sweeps the built-in signal generator across a frequency range while measuring gain and phase. The result is a frequency response plot displayed directly on screen — essential for characterizing power supply feedback loops, verifying filter rolloff, and measuring amplifier bandwidth.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-mso2202s-bode\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO2000-Bode.png\" alt=\"MSO2000 Bode plot analysis\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eBode plot analysis for control loop characterization\u003c\/span\u003e\n\u003c\/a\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eMixed-Signal Debugging\u003c\/h3\u003e\n\u003cp\u003eThe 16 digital channels display alongside analog traces with full time correlation. See bus activity and analog behavior on the same time axis — critical for debugging embedded systems where a protocol command triggers an analog response. Logic probe pod included.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-mso2202s-la\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO2000-LAScreen.png\" alt=\"MSO2000 16-channel logic analyzer\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003e16-channel logic analyzer correlated with analog traces\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-mso2202s-la\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO2000-LAScreen.png\" alt=\"MSO2000 16-channel logic analyzer\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003e16-channel logic analyzer correlated with analog traces\u003c\/span\u003e\n\u003c\/a\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-mso2202s-fft\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO2000-FFT.png\" alt=\"MSO2000 FFT spectrum analysis\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eFFT analysis for frequency domain signal characterization\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003ch3\u003eFFT Spectrum Analysis\u003c\/h3\u003e\n\u003cp\u003eThe built-in FFT converts time-domain waveforms to the frequency domain for identifying harmonics, EMI, clock spurs, and other spectral components. Combined with the 1,000,000 wfms\/s capture rate, this helps characterize both time and frequency behavior of complex signals.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-mso2202s-fft\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO2000-FFT.png\" alt=\"MSO2000 FFT spectrum analysis\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eFFT analysis for frequency domain signal characterization\u003c\/span\u003e\n\u003c\/a\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eAdvanced Triggering\u003c\/h3\u003e\n\u003cp\u003eBeyond standard edge triggering, the MSO\/UPO2000 supports pulse width, slope, video, pattern, timeout, and area triggers. The area trigger lets you draw a region on screen and trigger when a waveform enters or exits it — effective for catching anomalies in signals where you know the expected shape.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-mso2202s-trig\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO2000-Triggers.png\" alt=\"MSO2000 advanced trigger types\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eAdvanced trigger types for isolating specific signal conditions\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-mso2202s-trig\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO2000-Triggers.png\" alt=\"MSO2000 advanced trigger types\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eAdvanced trigger types for isolating specific signal conditions\u003c\/span\u003e\n\u003c\/a\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eApplications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEmbedded Systems Development\u003c\/strong\u003e — Debug firmware with time-correlated analog and digital views. Decode SPI, I²C, UART, and CAN bus traffic alongside power rails and clock signals.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Electronics\u003c\/strong\u003e — Capture switching waveforms with deep memory, trigger on specific conditions, and use FFT to characterize switching noise and harmonics.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEducation and Training\u003c\/strong\u003e — Touchscreen interface and automated measurements for teaching labs, with advanced features for upper-level coursework.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturing and Quality\u003c\/strong\u003e — Fast capture rate catches intermittent failures that slower scopes miss. Web remote control for rack-mounted setups.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eAre serial bus protocol decodes included?\u003c\/p\u003e\n\u003cp\u003eNo. Protocol decoding for RS-232, UART, I²C, SPI, CAN, CAN-FD, LIN, and FlexRay is available as optional software licenses. See the \u003ca href=\"\/collections\/mso-upo2000e\"\u003eMSO\/UPO2000 series page\u003c\/a\u003e for available decode options.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eWhat waveforms can the built-in signal generator produce?\u003c\/p\u003e\n\u003cp\u003eThe -S models include a 50 MHz arbitrary waveform generator outputting sine, square, ramp, pulse, noise, DC, and user-defined waveforms. It also enables the Bode plot function for automated frequency response measurement.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eWhat is the difference between MSO and UPO models?\u003c\/p\u003e\n\u003cp\u003eMSO models include the 16-channel logic probe pod. UPO models are the same oscilloscope without the logic pod — add it later with the \u003ca href=\"\/products\/ut-m15\"\u003eUT-M15\u003c\/a\u003e and \u003ca href=\"\/products\/upo2000-la16\"\u003eLA16 software license\u003c\/a\u003e. All other specifications are identical.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eWhat makes the 1,000,000 wfms\/s capture rate significant?\u003c\/p\u003e\n\u003cp\u003eA faster capture rate means the oscilloscope acquires more waveforms per second, increasing the probability of catching rare events like glitches, runts, or timing violations. At 1,000,000 wfms\/s, the MSO\/UPO2000 captures anomalies that scopes with 10,000–100,000 wfms\/s would likely miss.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003cp\u003ePart of the \u003ca href=\"\/collections\/mso-upo2000e\"\u003eMSO\/UPO2000 oscilloscope series\u003c\/a\u003e. All models share the same 2.0 GSa\/s sample rate, 56 Mpts memory, and 1,000,000 wfms\/s capture engine. See the \u003ca href=\"\/collections\/mso-upo2000e\"\u003eseries comparison table\u003c\/a\u003e to find the right combination of bandwidth, channels, and accessories.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"UNI-T","offers":[{"title":"Default Title","offer_id":46698172547356,"sku":"181100300043X","price":1049.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/MSO2202-S_Probes.jpg?v=1742401602"},{"product_id":"mso2104","title":"MSO2104 100 MHz 4+16Ch Mixed Signal Oscilloscope","description":"\u003ch1\u003eMSO2104 | 100 MHz 4+16Ch Mixed Signal Oscilloscope\u003c\/h1\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThe MSO2104 is a 100 MHz mixed signal oscilloscope with 4 analog channels and 16 digital channels (logic analyzer included). It samples at 2.0 GSa\/s with 56 Mpts memory depth and captures waveforms at up to 1,000,000 wfms\/s — one of the fastest capture rates in its class — on an 8-inch capacitive touchscreen.\u003c\/p\u003e\n\u003cp\u003eThe oscilloscope provides 36 automated measurements with statistics, advanced triggering (edge, pulse width, slope, video, pattern, and area trigger), FFT spectrum analysis, and web-based remote control via LAN. Serial bus protocol decoding for RS-232, UART, I²C, SPI, CAN, CAN-FD, LIN, and FlexRay is available as optional software licenses.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cdiv class=\"product-key-features\"\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e100 MHz Bandwidth, 4 Analog Channels\u003c\/strong\u003e — Four-channel capture at up to 100 MHz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2.0 GSa\/s Sample Rate\u003c\/strong\u003e — Captures fast edges and high-frequency content with accurate timing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e56 Mpts Memory Depth\u003c\/strong\u003e — Extended capture without reducing sample rate.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1,000,000 wfms\/s Capture Rate\u003c\/strong\u003e — High acquisition speed reveals rare glitches, runts, and timing violations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e16 Digital Channels Included\u003c\/strong\u003e — Mixed-signal debugging with time-correlated analog and digital views. Logic probe pod included.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e36 Automated Measurements\u003c\/strong\u003e — Time, voltage, frequency, and statistical measurements with real-time tracking.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eArea Trigger\u003c\/strong\u003e — Draw a region on screen to trigger on waveform anomalies.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFFT Spectrum Analysis\u003c\/strong\u003e — Frequency domain analysis for harmonics, EMI, and spectral characterization.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e8-Inch Capacitive Touchscreen\u003c\/strong\u003e — Pinch, zoom, and drag for efficient waveform navigation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeb Remote Control\u003c\/strong\u003e — Browser-based access from any device on the LAN.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnectivity\u003c\/strong\u003e — USB, LAN, VGA, EXT trigger, AUX output.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eMixed-Signal Debugging\u003c\/h3\u003e\n\u003cp\u003eThe 16 digital channels display alongside analog traces with full time correlation. See bus activity and analog behavior on the same time axis — critical for debugging embedded systems where a protocol command triggers an analog response. Logic probe pod included.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-mso2104-la\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO2000-LAScreen.png\" alt=\"MSO2000 16-channel logic analyzer\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003e16-channel logic analyzer correlated with analog traces\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-mso2104-la\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO2000-LAScreen.png\" alt=\"MSO2000 16-channel logic analyzer\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003e16-channel logic analyzer correlated with analog traces\u003c\/span\u003e\n\u003c\/a\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-mso2104-fft\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO2000-FFT.png\" alt=\"MSO2000 FFT spectrum analysis\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eFFT analysis for frequency domain signal characterization\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003ch3\u003eFFT Spectrum Analysis\u003c\/h3\u003e\n\u003cp\u003eThe built-in FFT converts time-domain waveforms to the frequency domain for identifying harmonics, EMI, clock spurs, and other spectral components. Combined with the 1,000,000 wfms\/s capture rate, this helps characterize both time and frequency behavior of complex signals.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-mso2104-fft\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO2000-FFT.png\" alt=\"MSO2000 FFT spectrum analysis\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eFFT analysis for frequency domain signal characterization\u003c\/span\u003e\n\u003c\/a\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eAdvanced Triggering\u003c\/h3\u003e\n\u003cp\u003eBeyond standard edge triggering, the MSO\/UPO2000 supports pulse width, slope, video, pattern, timeout, and area triggers. The area trigger lets you draw a region on screen and trigger when a waveform enters or exits it — effective for catching anomalies in signals where you know the expected shape.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-mso2104-trig\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO2000-Triggers.png\" alt=\"MSO2000 advanced trigger types\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eAdvanced trigger types for isolating specific signal conditions\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-mso2104-trig\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO2000-Triggers.png\" alt=\"MSO2000 advanced trigger types\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eAdvanced trigger types for isolating specific signal conditions\u003c\/span\u003e\n\u003c\/a\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-mso2104-mem\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO2000-Mem.png\" alt=\"MSO2000 56 Mpts memory depth\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003e56 Mpts memory depth for extended signal capture\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003ch3\u003eDeep Memory Capture\u003c\/h3\u003e\n\u003cp\u003eWith 56 Mpts of memory, the oscilloscope maintains high sample rates across wide time base settings. Capture complete communication sequences, power-on cycles, or slow mechanical processes without aliasing. Zoom into any portion of the record to examine details at full resolution.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-mso2104-mem\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO2000-Mem.png\" alt=\"MSO2000 56 Mpts memory depth\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003e56 Mpts memory depth for extended signal capture\u003c\/span\u003e\n\u003c\/a\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eApplications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEmbedded Systems Development\u003c\/strong\u003e — Debug firmware with time-correlated analog and digital views. Decode SPI, I²C, UART, and CAN bus traffic alongside power rails and clock signals.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Electronics\u003c\/strong\u003e — Capture switching waveforms with deep memory, trigger on specific conditions, and use FFT to characterize switching noise and harmonics.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-Channel Signal Analysis\u003c\/strong\u003e — Four analog channels for simultaneous capture of input, output, reference, and feedback signals.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEducation and Training\u003c\/strong\u003e — Touchscreen interface and automated measurements for teaching labs, with advanced features for upper-level coursework.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturing and Quality\u003c\/strong\u003e — Fast capture rate catches intermittent failures that slower scopes miss. Web remote control for rack-mounted setups.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eAre serial bus protocol decodes included?\u003c\/p\u003e\n\u003cp\u003eNo. Protocol decoding for RS-232, UART, I²C, SPI, CAN, CAN-FD, LIN, and FlexRay is available as optional software licenses. See the \u003ca href=\"\/collections\/mso-upo2000e\"\u003eMSO\/UPO2000 series page\u003c\/a\u003e for available decode options.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eWhat is the difference between MSO and UPO models?\u003c\/p\u003e\n\u003cp\u003eMSO models include the 16-channel logic probe pod. UPO models are the same oscilloscope without the logic pod — add it later with the \u003ca href=\"\/products\/ut-m15\"\u003eUT-M15\u003c\/a\u003e and \u003ca href=\"\/products\/upo2000-la16\"\u003eLA16 software license\u003c\/a\u003e. All other specifications are identical.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eWhat makes the 1,000,000 wfms\/s capture rate significant?\u003c\/p\u003e\n\u003cp\u003eA faster capture rate means the oscilloscope acquires more waveforms per second, increasing the probability of catching rare events like glitches, runts, or timing violations. At 1,000,000 wfms\/s, the MSO\/UPO2000 captures anomalies that scopes with 10,000–100,000 wfms\/s would likely miss.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003cp\u003ePart of the \u003ca href=\"\/collections\/mso-upo2000e\"\u003eMSO\/UPO2000 oscilloscope series\u003c\/a\u003e. All models share the same 2.0 GSa\/s sample rate, 56 Mpts memory, and 1,000,000 wfms\/s capture engine. See the \u003ca href=\"\/collections\/mso-upo2000e\"\u003eseries comparison table\u003c\/a\u003e to find the right combination of bandwidth, channels, and accessories.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"UNI-T","offers":[{"title":"Default Title","offer_id":46698187456796,"sku":"181100300039X","price":979.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/MSO2104_Probes.jpg?v=1742401593"},{"product_id":"utg4162a","title":"UTG4162A 160MHz 2Ch Performance-Series Arbitrary Waveform Generator","description":"\u003ch1\u003eUNI-T UTG4162A 160 MHz 2-Channel Performance-Series Arbitrary Waveform Generator: 16-Bit DDS with 8-Inch Display\u003c\/h1\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eUNI-T UTG4162A\u003c\/strong\u003e is a 2-channel arbitrary waveform generator with a maximum sine output of 160 MHz, built on Direct Digital Synthesis with a 500 MSa\/s sample rate and 16-bit vertical resolution. An 8 pts to 32 Mpts arbitrary-waveform memory with 7 GB of non-volatile storage supports long-form custom stimulus, and an 8-inch TFT display with a structured key-and-knob interface keeps parameter entry direct.\u003c\/p\u003e\n\u003cp\u003e50 MHz square \/ pulse output, 1 µHz frequency resolution across the full 160 MHz range, and a built-in 100 mHz to 800 MHz hardware frequency counter. Twelve analog and digital modulation types — AM, FM, PM, ASK, FSK, PSK, BPSK, QPSK, OSK, PWM, SUM, QAM. Linear and logarithmic sweep. Three burst modes (N-cycle, gated, infinite). Customizable harmonic generation. 160 built-in arbitrary waveforms with SPI \/ I²C \/ UART digital-protocol output.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eChoosing Your Model — UTG4000A Performance-Series\u003c\/h2\u003e\n\u003cp\u003eFour 2-channel models share one chassis, the same 500 MSa\/s sample rate, 16-bit DDS engine, 32 Mpts arbitrary memory, full 12-type modulation set, and the same interface and 8-inch display. They differ in one axis only: maximum output frequency.\u003c\/p\u003e\n\u003ctable class=\"product-spec-table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eUTG4082A\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e80 MHz sine \/ 30 MHz square \u0026amp; pulse — general-purpose stimulus for embedded, instrumentation, and teaching-lab work.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eUTG4122A\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e120 MHz sine \/ 40 MHz square \u0026amp; pulse — added headroom for higher-frequency stimulus and modulation carriers.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eUTG4162A\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e160 MHz sine \/ 50 MHz square \u0026amp; pulse — wider output range for RF-adjacent and faster digital work.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eUTG4202A\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e200 MHz sine \/ 60 MHz square \u0026amp; pulse — the widest output envelope in the series.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003eThis page describes the \u003cstrong\u003eUTG4162A\u003c\/strong\u003e. Channel architecture, modulation, sweep, burst, harmonic generation, interfaces, and the arbitrary engine below apply to all four models; the Specifications table lists this model's frequency figures.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cdiv class=\"product-key-features\"\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e160 MHz sine \/ 50 MHz square \u0026amp; pulse\u003c\/strong\u003e — 2-channel output with 1 µHz frequency resolution.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard dual channels\u003c\/strong\u003e — independent or channel-coupling mode for phase-locked, dual-tone, and tracking signal pairs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e500 MSa\/s sample rate, 16-bit DDS\u003c\/strong\u003e — stable, precise, low-distortion signal generation across all standard waveforms.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e32 Mpts arbitrary memory, 7 GB storage\u003c\/strong\u003e — deep custom-waveform depth with a large non-volatile on-instrument library.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e12 modulation types\u003c\/strong\u003e — AM, FM, PM, ASK, FSK, PSK, BPSK, QPSK, OSK, PWM, SUM, QAM — analog and digital in one instrument.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLinear and logarithmic sweep\u003c\/strong\u003e — with internal, external, and manual trigger sources.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree burst modes\u003c\/strong\u003e — N-cycle, gated, infinite, with configurable cycle count and start phase.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCustomizable harmonic generation\u003c\/strong\u003e — user-defined order, amplitude, and phase per harmonic.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt-in 800 MHz frequency counter\u003c\/strong\u003e — 100 mHz to 800 MHz, combined source-and-measure on one bench instrument.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e8-inch TFT display\u003c\/strong\u003e — WVGA 800 × 480 with structured key-and-knob navigation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB Host\/Device, LAN\u003c\/strong\u003e — with 10 MHz reference in\/out and external trigger; SPI \/ I²C \/ UART digital-protocol output.\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eUNI-T UTG4162A Details\u003c\/h2\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eStandard Dual Channels with Channel Coupling\u003c\/h3\u003e\n\u003cp\u003eTwo independent channels operate stand-alone or in channel-coupling mode, where a parameter change on one channel is mirrored on the other by a defined frequency, amplitude, or phase relationship. This produces phase-locked pairs, dual-tone stimulus, and tracking signals from a single instrument without external synchronization.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-utg4162a-160mhz-2ch-peformance-series-arbitrary-waveform-generator-dualch\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTG4000A-Setting-Frequency.png\" alt=\"UTG4162A standard dual channels with channel coupling\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eTwo independent channels with channel-coupling output mode for phase-locked and tracking pairs.\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-utg4162a-160mhz-2ch-peformance-series-arbitrary-waveform-generator-arb\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTG4000A-Arb.png\" alt=\"UTG4162A 32 mpts arbitrary waveform depth, 7 gb non-volatile storage\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003e8 pts to 32 Mpts arbitrary depth, 16-bit resolution, 7 GB non-volatile waveform storage.\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003ch3\u003e32 Mpts Arbitrary Waveform Depth, 7 GB Non-Volatile Storage\u003c\/h3\u003e\n\u003cp\u003eDirect Digital Synthesis drives an 8 pts to 32 Mpts arbitrary-waveform memory at 16-bit vertical resolution, holding long-form custom stimulus, sensor-emulation traces, and complex composite waveforms. 7 GB of non-volatile storage retains a deep library of saved arbitrary waveforms on the instrument, with 160 standard waveforms built in.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eTwelve Modulation Types in One Instrument\u003c\/h3\u003e\n\u003cp\u003eTwelve analog and digital modulation schemes are built in: AM, FM, PM, ASK, FSK, PSK, BPSK, QPSK, OSK, PWM, SUM, and QAM. Internal or external modulation sources with configurable depth and rate cover communications-stimulus development, receiver characterization, and mixed-signal test from a single channel.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-utg4162a-160mhz-2ch-peformance-series-arbitrary-waveform-generator-mod\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTG4000A-Modulation.png\" alt=\"UTG4162A twelve modulation types in one instrument\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eTwelve modulation types spanning analog and digital schemes, internal or external source.\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-utg4162a-160mhz-2ch-peformance-series-arbitrary-waveform-generator-sweep\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTG4000A-Sweep.png\" alt=\"UTG4162A linear and logarithmic frequency sweep\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eLinear and logarithmic sweep with internal, external, and manual triggering.\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003ch3\u003eLinear and Logarithmic Frequency Sweep\u003c\/h3\u003e\n\u003cp\u003eLinear and logarithmic frequency sweep with internal, external, and manual trigger sources supports frequency-response characterization, filter and amplifier testing, and resonance searching. Start, stop, and sweep-time parameters are independently configurable.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eBurst Generation — N-Cycle, Gated, and Infinite\u003c\/h3\u003e\n\u003cp\u003eBurst output in N-cycle, gated, and infinite modes produces precisely counted tone bursts and gated stimulus for transient testing, trigger-chain validation, and timing characterization. Cycle count, start phase, and trigger source are user-configurable.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-utg4162a-160mhz-2ch-peformance-series-arbitrary-waveform-generator-burst\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTG4000A-Burst.png\" alt=\"UTG4162A burst generation — n-cycle, gated, and infinite\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eN-cycle, gated, and infinite burst with configurable cycle count and start phase.\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-utg4162a-160mhz-2ch-peformance-series-arbitrary-waveform-generator-harmonic\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTG4000A-Harmonic.png\" alt=\"UTG4162A customizable harmonic generation\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eUser-defined harmonic order, amplitude, and phase for controlled spectral stimulus.\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003ch3\u003eCustomizable Harmonic Generation\u003c\/h3\u003e\n\u003cp\u003eDedicated harmonic generation outputs user-defined harmonic content with independently adjustable order, amplitude, and phase per harmonic. This supports power-quality emulation, harmonic-distortion testing, and controlled spectral-content stimulus without building the waveform point-by-point.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eBuilt-In 800 MHz Frequency Counter\u003c\/h3\u003e\n\u003cp\u003eAn integrated hardware frequency counter measures 100 mHz to 800 MHz, turning the instrument into a combined source-and-measure tool for closed-loop frequency checks, reference verification, and quick bench measurements without a separate counter.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-utg4162a-160mhz-2ch-peformance-series-arbitrary-waveform-generator-counter\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTG4000A-Counter.png\" alt=\"UTG4162A built-in 800 mhz frequency counter\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eIntegrated 100 mHz to 800 MHz hardware frequency counter.\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-utg4162a-160mhz-2ch-peformance-series-arbitrary-waveform-generator-noise\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTG4000A-Noise.png\" alt=\"UTG4162A adjustable noise and low-distortion dds output\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eLow-distortion DDS output with adjustable noise for SNR and immunity testing.\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003ch3\u003eAdjustable Noise and Low-Distortion DDS Output\u003c\/h3\u003e\n\u003cp\u003eDirect Digital Synthesis delivers stable, precise, low-distortion signals across all standard waveforms. Adjustable noise output supports signal-plus-noise testing, SNR characterization, and noise-immunity validation of receivers and conditioning circuits.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eApplications\u003c\/h2\u003e\n\u003cp\u003eThe Performance-Series envelope — dual independent channels, 500 MSa\/s DDS, 32 Mpts arbitrary memory, 12-type modulation, sweep, burst, and harmonic generation — covers benchtop signal generation from near-DC through the instrument's maximum output frequency.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEmbedded and mixed-signal development\u003c\/strong\u003e — dual-channel clock, data, and stimulus generation with channel coupling for phase-locked pairs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommunications-stimulus work\u003c\/strong\u003e — ASK, FSK, PSK, BPSK, QPSK, OSK, QAM digital modulation; AM, FM, PM, DSB analog modulation with configurable rate and depth.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency-response characterization\u003c\/strong\u003e — linear and logarithmic sweep for filter, amplifier, and resonance testing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTransient and timing test\u003c\/strong\u003e — N-cycle and gated burst for trigger-chain validation and counted-tone stimulus.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower-quality and harmonic emulation\u003c\/strong\u003e — customizable harmonic generation with per-harmonic order, amplitude, and phase.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLong-form arbitrary playback\u003c\/strong\u003e — 32 Mpts depth with 7 GB storage for sensor-emulation traces and extended composite waveforms.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTeaching and instrumentation labs\u003c\/strong\u003e — combined source and 800 MHz counter on one 8-inch-display instrument.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eAccessories and Family Options\u003c\/h2\u003e\n\u003ch3\u003eIncluded with Every Unit\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePower cord conforming to destination country standard\u003c\/li\u003e\n\u003cli\u003eUSB interface cable (UT-D14)\u003c\/li\u003e\n\u003cli\u003eBNC cable pair (1 m)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eOptional Accessories\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUT-U02\u003c\/strong\u003e — digital interface cable for the optional special digital interface.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFamily Members\u003c\/h3\u003e\n\u003cp\u003eThe UTG4000A Performance-Series consists of four 2-channel SKUs sharing the same chassis, sample rate, DDS engine, modulation set, and arbitrary-waveform memory depth:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUTG4082A\u003c\/strong\u003e — 80 MHz sine \/ 30 MHz square\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUTG4122A\u003c\/strong\u003e — 120 MHz sine \/ 40 MHz square\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUTG4162A\u003c\/strong\u003e — 160 MHz sine \/ 50 MHz square (this product)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUTG4202A\u003c\/strong\u003e — 200 MHz sine \/ 60 MHz square\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eHow do the four UTG4000A models differ?\u003c\/p\u003e\n\u003cp\u003eAll four are the same 2-channel instrument with the same 500 MSa\/s sample rate, 16-bit DDS engine, 32 Mpts memory, 12-type modulation set, sweep, burst, harmonic generation, interfaces, and 8-inch display. They differ only in maximum output frequency: 80 MHz (UTG4082A), 120 MHz (UTG4122A), 160 MHz (UTG4162A), and 200 MHz (UTG4202A) sine, with correspondingly scaled square\/pulse, ramp, and harmonic ranges. Choose by the highest output frequency your work requires.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eCan both channels run independently at full performance?\u003c\/p\u003e\n\u003cp\u003eYes. The two channels are independent and can output different waveforms, frequencies, and amplitudes simultaneously, or be linked in channel-coupling mode where one channel tracks the other by a defined frequency, amplitude, or phase relationship.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eWhat is channel coupling used for?\u003c\/p\u003e\n\u003cp\u003eChannel coupling locks the two outputs by a configurable ratio or offset in frequency, amplitude, or phase — useful for generating phase-locked signal pairs, dual-tone stimulus, and tracking reference signals without external synchronization hardware.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eWhat modulation, sweep, and burst does it cover?\u003c\/p\u003e\n\u003cp\u003eModulation: 12 types — AM, FM, PM, ASK, FSK, PSK, BPSK, QPSK, OSK, PWM, SUM, QAM. Sweep: linear and logarithmic with internal, external, and manual triggers. Burst: N-cycle, gated, and infinite.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eDoes it have a built-in frequency counter?\u003c\/p\u003e\n\u003cp\u003eYes — an integrated hardware frequency counter measuring 100 mHz to 800 MHz, making the instrument a combined source-and-measure tool for closed-loop frequency checks and quick bench measurements.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003c\/div\u003e\u003ca id=\"lb-utg4162a-160mhz-2ch-peformance-series-arbitrary-waveform-generator-dualch\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTG4000A-Setting-Frequency.png\" alt=\"UTG4162A standard dual channels with channel coupling\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eStandard dual channels with frequency, amplitude, and phase coupling\u003c\/span\u003e\n\u003c\/a\u003e\n\u003ca id=\"lb-utg4162a-160mhz-2ch-peformance-series-arbitrary-waveform-generator-arb\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTG4000A-Arb.png\" alt=\"UTG4162A 32 mpts arbitrary waveform depth, 7 gb non-volatile storage\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eDeep arbitrary-waveform memory with 7 GB non-volatile storage\u003c\/span\u003e\n\u003c\/a\u003e\n\u003ca id=\"lb-utg4162a-160mhz-2ch-peformance-series-arbitrary-waveform-generator-mod\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTG4000A-Modulation.png\" alt=\"UTG4162A twelve modulation types in one instrument\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eTwelve modulation types — analog and digital — in one instrument\u003c\/span\u003e\n\u003c\/a\u003e\n\u003ca id=\"lb-utg4162a-160mhz-2ch-peformance-series-arbitrary-waveform-generator-sweep\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTG4000A-Sweep.png\" alt=\"UTG4162A linear and logarithmic frequency sweep\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eLinear and logarithmic frequency sweep for response characterization\u003c\/span\u003e\n\u003c\/a\u003e\n\u003ca id=\"lb-utg4162a-160mhz-2ch-peformance-series-arbitrary-waveform-generator-burst\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTG4000A-Burst.png\" alt=\"UTG4162A burst generation — n-cycle, gated, and infinite\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eBurst generation in N-cycle, gated, and infinite modes\u003c\/span\u003e\n\u003c\/a\u003e\n\u003ca id=\"lb-utg4162a-160mhz-2ch-peformance-series-arbitrary-waveform-generator-harmonic\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTG4000A-Harmonic.png\" alt=\"UTG4162A customizable harmonic generation\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eCustomizable harmonic generation with per-harmonic control\u003c\/span\u003e\n\u003c\/a\u003e\n\u003ca id=\"lb-utg4162a-160mhz-2ch-peformance-series-arbitrary-waveform-generator-counter\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTG4000A-Counter.png\" alt=\"UTG4162A built-in 800 mhz frequency counter\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eBuilt-in hardware frequency counter, 100 mHz to 800 MHz\u003c\/span\u003e\n\u003c\/a\u003e\n\u003ca id=\"lb-utg4162a-160mhz-2ch-peformance-series-arbitrary-waveform-generator-noise\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTG4000A-Noise.png\" alt=\"UTG4162A adjustable noise and low-distortion dds output\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eAdjustable noise output and low-distortion DDS signal generation\u003c\/span\u003e\n\u003c\/a\u003e","brand":"UNI-T","offers":[{"title":"181300100070X","offer_id":52964906467612,"sku":"181300100070X","price":1031.2,"currency_code":"USD","in_stock":true},{"title":"181340080005X","offer_id":52964906500380,"sku":"181340080005X","price":1031.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UTG4162A_Cables.jpg?v=1720807241"},{"product_id":"utg4122a","title":"UTG4122A 120MHz 2Ch Performance-Series Arbitrary Waveform Generator","description":"\u003ch1\u003eUNI-T UTG4122A 120 MHz 2-Channel Performance-Series Arbitrary Waveform Generator: 16-Bit DDS with 8-Inch Display\u003c\/h1\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eUNI-T UTG4122A\u003c\/strong\u003e is a 2-channel arbitrary waveform generator with a maximum sine output of 120 MHz, built on Direct Digital Synthesis with a 500 MSa\/s sample rate and 16-bit vertical resolution. An 8 pts to 32 Mpts arbitrary-waveform memory with 7 GB of non-volatile storage supports long-form custom stimulus, and an 8-inch TFT display with a structured key-and-knob interface keeps parameter entry direct.\u003c\/p\u003e\n\u003cp\u003e40 MHz square \/ pulse output, 1 µHz frequency resolution across the full 120 MHz range, and a built-in 100 mHz to 800 MHz hardware frequency counter. Twelve analog and digital modulation types — AM, FM, PM, ASK, FSK, PSK, BPSK, QPSK, OSK, PWM, SUM, QAM. Linear and logarithmic sweep. Three burst modes (N-cycle, gated, infinite). Customizable harmonic generation. 160 built-in arbitrary waveforms with SPI \/ I²C \/ UART digital-protocol output.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eChoosing Your Model — UTG4000A Performance-Series\u003c\/h2\u003e\n\u003cp\u003eFour 2-channel models share one chassis, the same 500 MSa\/s sample rate, 16-bit DDS engine, 32 Mpts arbitrary memory, full 12-type modulation set, and the same interface and 8-inch display. They differ in one axis only: maximum output frequency.\u003c\/p\u003e\n\u003ctable class=\"product-spec-table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eUTG4082A\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e80 MHz sine \/ 30 MHz square \u0026amp; pulse — general-purpose stimulus for embedded, instrumentation, and teaching-lab work.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eUTG4122A\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e120 MHz sine \/ 40 MHz square \u0026amp; pulse — added headroom for higher-frequency stimulus and modulation carriers.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eUTG4162A\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e160 MHz sine \/ 50 MHz square \u0026amp; pulse — wider output range for RF-adjacent and faster digital work.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eUTG4202A\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e200 MHz sine \/ 60 MHz square \u0026amp; pulse — the widest output envelope in the series.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003eThis page describes the \u003cstrong\u003eUTG4122A\u003c\/strong\u003e. Channel architecture, modulation, sweep, burst, harmonic generation, interfaces, and the arbitrary engine below apply to all four models; the Specifications table lists this model's frequency figures.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cdiv class=\"product-key-features\"\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e120 MHz sine \/ 40 MHz square \u0026amp; pulse\u003c\/strong\u003e — 2-channel output with 1 µHz frequency resolution.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard dual channels\u003c\/strong\u003e — independent or channel-coupling mode for phase-locked, dual-tone, and tracking signal pairs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e500 MSa\/s sample rate, 16-bit DDS\u003c\/strong\u003e — stable, precise, low-distortion signal generation across all standard waveforms.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e32 Mpts arbitrary memory, 7 GB storage\u003c\/strong\u003e — deep custom-waveform depth with a large non-volatile on-instrument library.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e12 modulation types\u003c\/strong\u003e — AM, FM, PM, ASK, FSK, PSK, BPSK, QPSK, OSK, PWM, SUM, QAM — analog and digital in one instrument.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLinear and logarithmic sweep\u003c\/strong\u003e — with internal, external, and manual trigger sources.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree burst modes\u003c\/strong\u003e — N-cycle, gated, infinite, with configurable cycle count and start phase.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCustomizable harmonic generation\u003c\/strong\u003e — user-defined order, amplitude, and phase per harmonic.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt-in 800 MHz frequency counter\u003c\/strong\u003e — 100 mHz to 800 MHz, combined source-and-measure on one bench instrument.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e8-inch TFT display\u003c\/strong\u003e — WVGA 800 × 480 with structured key-and-knob navigation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB Host\/Device, LAN\u003c\/strong\u003e — with 10 MHz reference in\/out and external trigger; SPI \/ I²C \/ UART digital-protocol output.\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eUNI-T UTG4122A Details\u003c\/h2\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eStandard Dual Channels with Channel Coupling\u003c\/h3\u003e\n\u003cp\u003eTwo independent channels operate stand-alone or in channel-coupling mode, where a parameter change on one channel is mirrored on the other by a defined frequency, amplitude, or phase relationship. This produces phase-locked pairs, dual-tone stimulus, and tracking signals from a single instrument without external synchronization.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-utg4122a-120mhz-2ch-peformance-series-arbitrary-waveform-generator-dualch\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTG4000A-Setting-Frequency.png\" alt=\"UTG4122A standard dual channels with channel coupling\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eTwo independent channels with channel-coupling output mode for phase-locked and tracking pairs.\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-utg4122a-120mhz-2ch-peformance-series-arbitrary-waveform-generator-arb\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTG4000A-Arb.png\" alt=\"UTG4122A 32 mpts arbitrary waveform depth, 7 gb non-volatile storage\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003e8 pts to 32 Mpts arbitrary depth, 16-bit resolution, 7 GB non-volatile waveform storage.\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003ch3\u003e32 Mpts Arbitrary Waveform Depth, 7 GB Non-Volatile Storage\u003c\/h3\u003e\n\u003cp\u003eDirect Digital Synthesis drives an 8 pts to 32 Mpts arbitrary-waveform memory at 16-bit vertical resolution, holding long-form custom stimulus, sensor-emulation traces, and complex composite waveforms. 7 GB of non-volatile storage retains a deep library of saved arbitrary waveforms on the instrument, with 160 standard waveforms built in.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eTwelve Modulation Types in One Instrument\u003c\/h3\u003e\n\u003cp\u003eTwelve analog and digital modulation schemes are built in: AM, FM, PM, ASK, FSK, PSK, BPSK, QPSK, OSK, PWM, SUM, and QAM. Internal or external modulation sources with configurable depth and rate cover communications-stimulus development, receiver characterization, and mixed-signal test from a single channel.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-utg4122a-120mhz-2ch-peformance-series-arbitrary-waveform-generator-mod\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTG4000A-Modulation.png\" alt=\"UTG4122A twelve modulation types in one instrument\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eTwelve modulation types spanning analog and digital schemes, internal or external source.\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-utg4122a-120mhz-2ch-peformance-series-arbitrary-waveform-generator-sweep\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTG4000A-Sweep.png\" alt=\"UTG4122A linear and logarithmic frequency sweep\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eLinear and logarithmic sweep with internal, external, and manual triggering.\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003ch3\u003eLinear and Logarithmic Frequency Sweep\u003c\/h3\u003e\n\u003cp\u003eLinear and logarithmic frequency sweep with internal, external, and manual trigger sources supports frequency-response characterization, filter and amplifier testing, and resonance searching. Start, stop, and sweep-time parameters are independently configurable.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eBurst Generation — N-Cycle, Gated, and Infinite\u003c\/h3\u003e\n\u003cp\u003eBurst output in N-cycle, gated, and infinite modes produces precisely counted tone bursts and gated stimulus for transient testing, trigger-chain validation, and timing characterization. Cycle count, start phase, and trigger source are user-configurable.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-utg4122a-120mhz-2ch-peformance-series-arbitrary-waveform-generator-burst\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTG4000A-Burst.png\" alt=\"UTG4122A burst generation — n-cycle, gated, and infinite\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eN-cycle, gated, and infinite burst with configurable cycle count and start phase.\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-utg4122a-120mhz-2ch-peformance-series-arbitrary-waveform-generator-harmonic\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTG4000A-Harmonic.png\" alt=\"UTG4122A customizable harmonic generation\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eUser-defined harmonic order, amplitude, and phase for controlled spectral stimulus.\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003ch3\u003eCustomizable Harmonic Generation\u003c\/h3\u003e\n\u003cp\u003eDedicated harmonic generation outputs user-defined harmonic content with independently adjustable order, amplitude, and phase per harmonic. This supports power-quality emulation, harmonic-distortion testing, and controlled spectral-content stimulus without building the waveform point-by-point.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eBuilt-In 800 MHz Frequency Counter\u003c\/h3\u003e\n\u003cp\u003eAn integrated hardware frequency counter measures 100 mHz to 800 MHz, turning the instrument into a combined source-and-measure tool for closed-loop frequency checks, reference verification, and quick bench measurements without a separate counter.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-utg4122a-120mhz-2ch-peformance-series-arbitrary-waveform-generator-counter\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTG4000A-Counter.png\" alt=\"UTG4122A built-in 800 mhz frequency counter\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eIntegrated 100 mHz to 800 MHz hardware frequency counter.\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-utg4122a-120mhz-2ch-peformance-series-arbitrary-waveform-generator-noise\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTG4000A-Noise.png\" alt=\"UTG4122A adjustable noise and low-distortion dds output\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eLow-distortion DDS output with adjustable noise for SNR and immunity testing.\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003ch3\u003eAdjustable Noise and Low-Distortion DDS Output\u003c\/h3\u003e\n\u003cp\u003eDirect Digital Synthesis delivers stable, precise, low-distortion signals across all standard waveforms. Adjustable noise output supports signal-plus-noise testing, SNR characterization, and noise-immunity validation of receivers and conditioning circuits.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eApplications\u003c\/h2\u003e\n\u003cp\u003eThe Performance-Series envelope — dual independent channels, 500 MSa\/s DDS, 32 Mpts arbitrary memory, 12-type modulation, sweep, burst, and harmonic generation — covers benchtop signal generation from near-DC through the instrument's maximum output frequency.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEmbedded and mixed-signal development\u003c\/strong\u003e — dual-channel clock, data, and stimulus generation with channel coupling for phase-locked pairs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommunications-stimulus work\u003c\/strong\u003e — ASK, FSK, PSK, BPSK, QPSK, OSK, QAM digital modulation; AM, FM, PM, DSB analog modulation with configurable rate and depth.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency-response characterization\u003c\/strong\u003e — linear and logarithmic sweep for filter, amplifier, and resonance testing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTransient and timing test\u003c\/strong\u003e — N-cycle and gated burst for trigger-chain validation and counted-tone stimulus.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower-quality and harmonic emulation\u003c\/strong\u003e — customizable harmonic generation with per-harmonic order, amplitude, and phase.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLong-form arbitrary playback\u003c\/strong\u003e — 32 Mpts depth with 7 GB storage for sensor-emulation traces and extended composite waveforms.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTeaching and instrumentation labs\u003c\/strong\u003e — combined source and 800 MHz counter on one 8-inch-display instrument.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eAccessories and Family Options\u003c\/h2\u003e\n\u003ch3\u003eIncluded with Every Unit\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePower cord conforming to destination country standard\u003c\/li\u003e\n\u003cli\u003eUSB interface cable (UT-D14)\u003c\/li\u003e\n\u003cli\u003eBNC cable pair (1 m)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eOptional Accessories\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUT-U02\u003c\/strong\u003e — digital interface cable for the optional special digital interface.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFamily Members\u003c\/h3\u003e\n\u003cp\u003eThe UTG4000A Performance-Series consists of four 2-channel SKUs sharing the same chassis, sample rate, DDS engine, modulation set, and arbitrary-waveform memory depth:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUTG4082A\u003c\/strong\u003e — 80 MHz sine \/ 30 MHz square\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUTG4122A\u003c\/strong\u003e — 120 MHz sine \/ 40 MHz square (this product)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUTG4162A\u003c\/strong\u003e — 160 MHz sine \/ 50 MHz square\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUTG4202A\u003c\/strong\u003e — 200 MHz sine \/ 60 MHz square\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eHow do the four UTG4000A models differ?\u003c\/p\u003e\n\u003cp\u003eAll four are the same 2-channel instrument with the same 500 MSa\/s sample rate, 16-bit DDS engine, 32 Mpts memory, 12-type modulation set, sweep, burst, harmonic generation, interfaces, and 8-inch display. They differ only in maximum output frequency: 80 MHz (UTG4082A), 120 MHz (UTG4122A), 160 MHz (UTG4162A), and 200 MHz (UTG4202A) sine, with correspondingly scaled square\/pulse, ramp, and harmonic ranges. Choose by the highest output frequency your work requires.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eCan both channels run independently at full performance?\u003c\/p\u003e\n\u003cp\u003eYes. The two channels are independent and can output different waveforms, frequencies, and amplitudes simultaneously, or be linked in channel-coupling mode where one channel tracks the other by a defined frequency, amplitude, or phase relationship.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eWhat is channel coupling used for?\u003c\/p\u003e\n\u003cp\u003eChannel coupling locks the two outputs by a configurable ratio or offset in frequency, amplitude, or phase — useful for generating phase-locked signal pairs, dual-tone stimulus, and tracking reference signals without external synchronization hardware.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eWhat modulation, sweep, and burst does it cover?\u003c\/p\u003e\n\u003cp\u003eModulation: 12 types — AM, FM, PM, ASK, FSK, PSK, BPSK, QPSK, OSK, PWM, SUM, QAM. Sweep: linear and logarithmic with internal, external, and manual triggers. Burst: N-cycle, gated, and infinite.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eDoes it have a built-in frequency counter?\u003c\/p\u003e\n\u003cp\u003eYes — an integrated hardware frequency counter measuring 100 mHz to 800 MHz, making the instrument a combined source-and-measure tool for closed-loop frequency checks and quick bench measurements.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003c\/div\u003e\u003ca id=\"lb-utg4122a-120mhz-2ch-peformance-series-arbitrary-waveform-generator-dualch\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTG4000A-Setting-Frequency.png\" alt=\"UTG4122A standard dual channels with channel coupling\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eStandard dual channels with frequency, amplitude, and phase coupling\u003c\/span\u003e\n\u003c\/a\u003e\n\u003ca id=\"lb-utg4122a-120mhz-2ch-peformance-series-arbitrary-waveform-generator-arb\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTG4000A-Arb.png\" alt=\"UTG4122A 32 mpts arbitrary waveform depth, 7 gb non-volatile storage\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eDeep arbitrary-waveform memory with 7 GB non-volatile storage\u003c\/span\u003e\n\u003c\/a\u003e\n\u003ca id=\"lb-utg4122a-120mhz-2ch-peformance-series-arbitrary-waveform-generator-mod\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTG4000A-Modulation.png\" alt=\"UTG4122A twelve modulation types in one instrument\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eTwelve modulation types — analog and digital — in one instrument\u003c\/span\u003e\n\u003c\/a\u003e\n\u003ca id=\"lb-utg4122a-120mhz-2ch-peformance-series-arbitrary-waveform-generator-sweep\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTG4000A-Sweep.png\" alt=\"UTG4122A linear and logarithmic frequency sweep\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eLinear and logarithmic frequency sweep for response characterization\u003c\/span\u003e\n\u003c\/a\u003e\n\u003ca id=\"lb-utg4122a-120mhz-2ch-peformance-series-arbitrary-waveform-generator-burst\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTG4000A-Burst.png\" alt=\"UTG4122A burst generation — n-cycle, gated, and infinite\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eBurst generation in N-cycle, gated, and infinite modes\u003c\/span\u003e\n\u003c\/a\u003e\n\u003ca id=\"lb-utg4122a-120mhz-2ch-peformance-series-arbitrary-waveform-generator-harmonic\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTG4000A-Harmonic.png\" alt=\"UTG4122A customizable harmonic generation\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eCustomizable harmonic generation with per-harmonic control\u003c\/span\u003e\n\u003c\/a\u003e\n\u003ca id=\"lb-utg4122a-120mhz-2ch-peformance-series-arbitrary-waveform-generator-counter\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTG4000A-Counter.png\" alt=\"UTG4122A built-in 800 mhz frequency counter\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eBuilt-in hardware frequency counter, 100 mHz to 800 MHz\u003c\/span\u003e\n\u003c\/a\u003e\n\u003ca id=\"lb-utg4122a-120mhz-2ch-peformance-series-arbitrary-waveform-generator-noise\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTG4000A-Noise.png\" alt=\"UTG4122A adjustable noise and low-distortion dds output\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eAdjustable noise output and low-distortion DDS signal generation\u003c\/span\u003e\n\u003c\/a\u003e","brand":"UNI-T","offers":[{"title":"181300100071X","offer_id":52964853154076,"sku":"181300100071X","price":919.2,"currency_code":"USD","in_stock":true},{"title":"181340080006X","offer_id":52964853186844,"sku":"181340080006X","price":919.2,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UTG4122A_Cables.jpg?v=1720807250"},{"product_id":"utg4082a","title":"UTG4082A 80MHz 2Ch Performance-Series Arbitrary Waveform Generator","description":"\u003ch1\u003eUNI-T UTG4082A 80 MHz 2-Channel Performance-Series Arbitrary Waveform Generator: 16-Bit DDS with 8-Inch Display\u003c\/h1\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eUNI-T UTG4082A\u003c\/strong\u003e is a 2-channel arbitrary waveform generator with a maximum sine output of 80 MHz, built on Direct Digital Synthesis with a 500 MSa\/s sample rate and 16-bit vertical resolution. An 8 pts to 32 Mpts arbitrary-waveform memory with 7 GB of non-volatile storage supports long-form custom stimulus, and an 8-inch TFT display with a structured key-and-knob interface keeps parameter entry direct.\u003c\/p\u003e\n\u003cp\u003e30 MHz square \/ pulse output, 1 µHz frequency resolution across the full 80 MHz range, and a built-in 100 mHz to 800 MHz hardware frequency counter. Twelve analog and digital modulation types — AM, FM, PM, ASK, FSK, PSK, BPSK, QPSK, OSK, PWM, SUM, QAM. Linear and logarithmic sweep. Three burst modes (N-cycle, gated, infinite). Customizable harmonic generation. 160 built-in arbitrary waveforms with SPI \/ I²C \/ UART digital-protocol output.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eChoosing Your Model — UTG4000A Performance-Series\u003c\/h2\u003e\n\u003cp\u003eFour 2-channel models share one chassis, the same 500 MSa\/s sample rate, 16-bit DDS engine, 32 Mpts arbitrary memory, full 12-type modulation set, and the same interface and 8-inch display. They differ in one axis only: maximum output frequency.\u003c\/p\u003e\n\u003ctable class=\"product-spec-table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eUTG4082A\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e80 MHz sine \/ 30 MHz square \u0026amp; pulse — general-purpose stimulus for embedded, instrumentation, and teaching-lab work.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eUTG4122A\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e120 MHz sine \/ 40 MHz square \u0026amp; pulse — added headroom for higher-frequency stimulus and modulation carriers.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eUTG4162A\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e160 MHz sine \/ 50 MHz square \u0026amp; pulse — wider output range for RF-adjacent and faster digital work.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eUTG4202A\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e200 MHz sine \/ 60 MHz square \u0026amp; pulse — the widest output envelope in the series.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003eThis page describes the \u003cstrong\u003eUTG4082A\u003c\/strong\u003e. Channel architecture, modulation, sweep, burst, harmonic generation, interfaces, and the arbitrary engine below apply to all four models; the Specifications table lists this model's frequency figures.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cdiv class=\"product-key-features\"\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e80 MHz sine \/ 30 MHz square \u0026amp; pulse\u003c\/strong\u003e — 2-channel output with 1 µHz frequency resolution.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard dual channels\u003c\/strong\u003e — independent or channel-coupling mode for phase-locked, dual-tone, and tracking signal pairs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e500 MSa\/s sample rate, 16-bit DDS\u003c\/strong\u003e — stable, precise, low-distortion signal generation across all standard waveforms.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e32 Mpts arbitrary memory, 7 GB storage\u003c\/strong\u003e — deep custom-waveform depth with a large non-volatile on-instrument library.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e12 modulation types\u003c\/strong\u003e — AM, FM, PM, ASK, FSK, PSK, BPSK, QPSK, OSK, PWM, SUM, QAM — analog and digital in one instrument.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLinear and logarithmic sweep\u003c\/strong\u003e — with internal, external, and manual trigger sources.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree burst modes\u003c\/strong\u003e — N-cycle, gated, infinite, with configurable cycle count and start phase.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCustomizable harmonic generation\u003c\/strong\u003e — user-defined order, amplitude, and phase per harmonic.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt-in 800 MHz frequency counter\u003c\/strong\u003e — 100 mHz to 800 MHz, combined source-and-measure on one bench instrument.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e8-inch TFT display\u003c\/strong\u003e — WVGA 800 × 480 with structured key-and-knob navigation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB Host\/Device, LAN\u003c\/strong\u003e — with 10 MHz reference in\/out and external trigger; SPI \/ I²C \/ UART digital-protocol output.\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eUNI-T UTG4082A Details\u003c\/h2\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eStandard Dual Channels with Channel Coupling\u003c\/h3\u003e\n\u003cp\u003eTwo independent channels operate stand-alone or in channel-coupling mode, where a parameter change on one channel is mirrored on the other by a defined frequency, amplitude, or phase relationship. This produces phase-locked pairs, dual-tone stimulus, and tracking signals from a single instrument without external synchronization.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-utg4082a-80mhz-2ch-peformance-series-arbitrary-waveform-generator-dualch\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTG4000A-Setting-Frequency.png\" alt=\"UTG4082A standard dual channels with channel coupling\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eTwo independent channels with channel-coupling output mode for phase-locked and tracking pairs.\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-utg4082a-80mhz-2ch-peformance-series-arbitrary-waveform-generator-arb\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTG4000A-Arb.png\" alt=\"UTG4082A 32 mpts arbitrary waveform depth, 7 gb non-volatile storage\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003e8 pts to 32 Mpts arbitrary depth, 16-bit resolution, 7 GB non-volatile waveform storage.\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003ch3\u003e32 Mpts Arbitrary Waveform Depth, 7 GB Non-Volatile Storage\u003c\/h3\u003e\n\u003cp\u003eDirect Digital Synthesis drives an 8 pts to 32 Mpts arbitrary-waveform memory at 16-bit vertical resolution, holding long-form custom stimulus, sensor-emulation traces, and complex composite waveforms. 7 GB of non-volatile storage retains a deep library of saved arbitrary waveforms on the instrument, with 160 standard waveforms built in.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eTwelve Modulation Types in One Instrument\u003c\/h3\u003e\n\u003cp\u003eTwelve analog and digital modulation schemes are built in: AM, FM, PM, ASK, FSK, PSK, BPSK, QPSK, OSK, PWM, SUM, and QAM. Internal or external modulation sources with configurable depth and rate cover communications-stimulus development, receiver characterization, and mixed-signal test from a single channel.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-utg4082a-80mhz-2ch-peformance-series-arbitrary-waveform-generator-mod\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTG4000A-Modulation.png\" alt=\"UTG4082A twelve modulation types in one instrument\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eTwelve modulation types spanning analog and digital schemes, internal or external source.\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-utg4082a-80mhz-2ch-peformance-series-arbitrary-waveform-generator-sweep\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTG4000A-Sweep.png\" alt=\"UTG4082A linear and logarithmic frequency sweep\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eLinear and logarithmic sweep with internal, external, and manual triggering.\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003ch3\u003eLinear and Logarithmic Frequency Sweep\u003c\/h3\u003e\n\u003cp\u003eLinear and logarithmic frequency sweep with internal, external, and manual trigger sources supports frequency-response characterization, filter and amplifier testing, and resonance searching. Start, stop, and sweep-time parameters are independently configurable.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eBurst Generation — N-Cycle, Gated, and Infinite\u003c\/h3\u003e\n\u003cp\u003eBurst output in N-cycle, gated, and infinite modes produces precisely counted tone bursts and gated stimulus for transient testing, trigger-chain validation, and timing characterization. Cycle count, start phase, and trigger source are user-configurable.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-utg4082a-80mhz-2ch-peformance-series-arbitrary-waveform-generator-burst\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTG4000A-Burst.png\" alt=\"UTG4082A burst generation — n-cycle, gated, and infinite\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eN-cycle, gated, and infinite burst with configurable cycle count and start phase.\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-utg4082a-80mhz-2ch-peformance-series-arbitrary-waveform-generator-harmonic\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTG4000A-Harmonic.png\" alt=\"UTG4082A customizable harmonic generation\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eUser-defined harmonic order, amplitude, and phase for controlled spectral stimulus.\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003ch3\u003eCustomizable Harmonic Generation\u003c\/h3\u003e\n\u003cp\u003eDedicated harmonic generation outputs user-defined harmonic content with independently adjustable order, amplitude, and phase per harmonic. This supports power-quality emulation, harmonic-distortion testing, and controlled spectral-content stimulus without building the waveform point-by-point.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eBuilt-In 800 MHz Frequency Counter\u003c\/h3\u003e\n\u003cp\u003eAn integrated hardware frequency counter measures 100 mHz to 800 MHz, turning the instrument into a combined source-and-measure tool for closed-loop frequency checks, reference verification, and quick bench measurements without a separate counter.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-utg4082a-80mhz-2ch-peformance-series-arbitrary-waveform-generator-counter\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTG4000A-Counter.png\" alt=\"UTG4082A built-in 800 mhz frequency counter\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eIntegrated 100 mHz to 800 MHz hardware frequency counter.\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-utg4082a-80mhz-2ch-peformance-series-arbitrary-waveform-generator-noise\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTG4000A-Noise.png\" alt=\"UTG4082A adjustable noise and low-distortion dds output\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eLow-distortion DDS output with adjustable noise for SNR and immunity testing.\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003ch3\u003eAdjustable Noise and Low-Distortion DDS Output\u003c\/h3\u003e\n\u003cp\u003eDirect Digital Synthesis delivers stable, precise, low-distortion signals across all standard waveforms. Adjustable noise output supports signal-plus-noise testing, SNR characterization, and noise-immunity validation of receivers and conditioning circuits.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eApplications\u003c\/h2\u003e\n\u003cp\u003eThe Performance-Series envelope — dual independent channels, 500 MSa\/s DDS, 32 Mpts arbitrary memory, 12-type modulation, sweep, burst, and harmonic generation — covers benchtop signal generation from near-DC through the instrument's maximum output frequency.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEmbedded and mixed-signal development\u003c\/strong\u003e — dual-channel clock, data, and stimulus generation with channel coupling for phase-locked pairs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommunications-stimulus work\u003c\/strong\u003e — ASK, FSK, PSK, BPSK, QPSK, OSK, QAM digital modulation; AM, FM, PM, DSB analog modulation with configurable rate and depth.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency-response characterization\u003c\/strong\u003e — linear and logarithmic sweep for filter, amplifier, and resonance testing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTransient and timing test\u003c\/strong\u003e — N-cycle and gated burst for trigger-chain validation and counted-tone stimulus.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower-quality and harmonic emulation\u003c\/strong\u003e — customizable harmonic generation with per-harmonic order, amplitude, and phase.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLong-form arbitrary playback\u003c\/strong\u003e — 32 Mpts depth with 7 GB storage for sensor-emulation traces and extended composite waveforms.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTeaching and instrumentation labs\u003c\/strong\u003e — combined source and 800 MHz counter on one 8-inch-display instrument.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eAccessories and Family Options\u003c\/h2\u003e\n\u003ch3\u003eIncluded with Every Unit\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePower cord conforming to destination country standard\u003c\/li\u003e\n\u003cli\u003eUSB interface cable (UT-D14)\u003c\/li\u003e\n\u003cli\u003eBNC cable pair (1 m)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eOptional Accessories\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUT-U02\u003c\/strong\u003e — digital interface cable for the optional special digital interface.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFamily Members\u003c\/h3\u003e\n\u003cp\u003eThe UTG4000A Performance-Series consists of four 2-channel SKUs sharing the same chassis, sample rate, DDS engine, modulation set, and arbitrary-waveform memory depth:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUTG4082A\u003c\/strong\u003e — 80 MHz sine \/ 30 MHz square (this product)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUTG4122A\u003c\/strong\u003e — 120 MHz sine \/ 40 MHz square\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUTG4162A\u003c\/strong\u003e — 160 MHz sine \/ 50 MHz square\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUTG4202A\u003c\/strong\u003e — 200 MHz sine \/ 60 MHz square\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eHow do the four UTG4000A models differ?\u003c\/p\u003e\n\u003cp\u003eAll four are the same 2-channel instrument with the same 500 MSa\/s sample rate, 16-bit DDS engine, 32 Mpts memory, 12-type modulation set, sweep, burst, harmonic generation, interfaces, and 8-inch display. They differ only in maximum output frequency: 80 MHz (UTG4082A), 120 MHz (UTG4122A), 160 MHz (UTG4162A), and 200 MHz (UTG4202A) sine, with correspondingly scaled square\/pulse, ramp, and harmonic ranges. Choose by the highest output frequency your work requires.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eCan both channels run independently at full performance?\u003c\/p\u003e\n\u003cp\u003eYes. The two channels are independent and can output different waveforms, frequencies, and amplitudes simultaneously, or be linked in channel-coupling mode where one channel tracks the other by a defined frequency, amplitude, or phase relationship.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eWhat is channel coupling used for?\u003c\/p\u003e\n\u003cp\u003eChannel coupling locks the two outputs by a configurable ratio or offset in frequency, amplitude, or phase — useful for generating phase-locked signal pairs, dual-tone stimulus, and tracking reference signals without external synchronization hardware.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eWhat modulation, sweep, and burst does it cover?\u003c\/p\u003e\n\u003cp\u003eModulation: 12 types — AM, FM, PM, ASK, FSK, PSK, BPSK, QPSK, OSK, PWM, SUM, QAM. Sweep: linear and logarithmic with internal, external, and manual triggers. Burst: N-cycle, gated, and infinite.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eDoes it have a built-in frequency counter?\u003c\/p\u003e\n\u003cp\u003eYes — an integrated hardware frequency counter measuring 100 mHz to 800 MHz, making the instrument a combined source-and-measure tool for closed-loop frequency checks and quick bench measurements.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003c\/div\u003e\u003ca id=\"lb-utg4082a-80mhz-2ch-peformance-series-arbitrary-waveform-generator-dualch\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTG4000A-Setting-Frequency.png\" alt=\"UTG4082A standard dual channels with channel coupling\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eStandard dual channels with frequency, amplitude, and phase coupling\u003c\/span\u003e\n\u003c\/a\u003e\n\u003ca id=\"lb-utg4082a-80mhz-2ch-peformance-series-arbitrary-waveform-generator-arb\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTG4000A-Arb.png\" alt=\"UTG4082A 32 mpts arbitrary waveform depth, 7 gb non-volatile storage\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eDeep arbitrary-waveform memory with 7 GB non-volatile storage\u003c\/span\u003e\n\u003c\/a\u003e\n\u003ca id=\"lb-utg4082a-80mhz-2ch-peformance-series-arbitrary-waveform-generator-mod\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTG4000A-Modulation.png\" alt=\"UTG4082A twelve modulation types in one instrument\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eTwelve modulation types — analog and digital — in one instrument\u003c\/span\u003e\n\u003c\/a\u003e\n\u003ca id=\"lb-utg4082a-80mhz-2ch-peformance-series-arbitrary-waveform-generator-sweep\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTG4000A-Sweep.png\" alt=\"UTG4082A linear and logarithmic frequency sweep\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eLinear and logarithmic frequency sweep for response characterization\u003c\/span\u003e\n\u003c\/a\u003e\n\u003ca id=\"lb-utg4082a-80mhz-2ch-peformance-series-arbitrary-waveform-generator-burst\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTG4000A-Burst.png\" alt=\"UTG4082A burst generation — n-cycle, gated, and infinite\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eBurst generation in N-cycle, gated, and infinite modes\u003c\/span\u003e\n\u003c\/a\u003e\n\u003ca id=\"lb-utg4082a-80mhz-2ch-peformance-series-arbitrary-waveform-generator-harmonic\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTG4000A-Harmonic.png\" alt=\"UTG4082A customizable harmonic generation\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eCustomizable harmonic generation with per-harmonic control\u003c\/span\u003e\n\u003c\/a\u003e\n\u003ca id=\"lb-utg4082a-80mhz-2ch-peformance-series-arbitrary-waveform-generator-counter\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTG4000A-Counter.png\" alt=\"UTG4082A built-in 800 mhz frequency counter\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eBuilt-in hardware frequency counter, 100 mHz to 800 MHz\u003c\/span\u003e\n\u003c\/a\u003e\n\u003ca id=\"lb-utg4082a-80mhz-2ch-peformance-series-arbitrary-waveform-generator-noise\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTG4000A-Noise.png\" alt=\"UTG4082A adjustable noise and low-distortion dds output\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eAdjustable noise output and low-distortion DDS signal generation\u003c\/span\u003e\n\u003c\/a\u003e","brand":"UNI-T","offers":[{"title":"181340080008X","offer_id":53049115640092,"sku":"181340080008X","price":719.2,"currency_code":"USD","in_stock":true},{"title":"181300100069X","offer_id":53049115672860,"sku":"181300100069X","price":719.2,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UTG4082A_Cables.jpg?v=1720807258"},{"product_id":"utg2122b","title":"UTG2122B 120MHz 2Ch Advanced-Series Arbitrary Waveform Generator","description":"\u003ch1\u003eUNI-T UTG2122B 120 MHz 2Ch Arbitrary Waveform Generator: 16-Bit Dual-Channel Bench Function Generator\u003c\/h1\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eUNI-T UTG2122B\u003c\/strong\u003e is a 120 MHz dual-channel arbitrary waveform generator built around a 16-bit DAC, 320 MSa\/s sample rate, and a 16 Mpts arbitrary-waveform memory depth. The Advanced-Series chassis adds LAN connectivity, a 10 MHz external reference clock input and output, and a wider modulation envelope — 13 analog and digital modulation types including QAM and the full BPSK \/ QPSK \/ OSK \/ DSB-AM set — on top of the Classic-Series feature set.\u003c\/p\u003e\n\u003cp\u003e30 MHz square \/ pulse output, 1 µHz frequency resolution across the full 120 MHz output range, harmonic distortion below 0.2%, a 6-bit hardware frequency counter (100 mHz to 200 MHz), and 160 built-in arbitrary waveforms. Sine, square, ramp, pulse, harmonic (up to 16th order), expression-defined, noise, DC, and arbitrary waveform shapes — with channel-coupling and channel-combination functions for dual-channel work that needs coordinated frequency, amplitude, or phase relationships.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cdiv class=\"product-key-features\"\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e120 MHz sine \/ 30 MHz square \u0026amp; pulse\u003c\/strong\u003e — dual-channel output with 1 µHz frequency resolution.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e16-bit vertical resolution, 320 MSa\/s sample rate\u003c\/strong\u003e — 65,536 amplitude levels; supports clean waveform reconstruction across the full output range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e16 Mpts arbitrary waveform memory\u003c\/strong\u003e — 4,000× the depth of typical 4 kpts entry-tier generators. Supports long-form arbitrary playback for protocol-stream emulation and complex stimulus.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e13 modulation types\u003c\/strong\u003e — AM, FM, PM, ASK, FSK, PSK, BPSK, QPSK, OSK, SUM, DSB-AM, QAM, PWM with internal and external source.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e160 built-in arbitrary waveforms\u003c\/strong\u003e — common shapes across measurement, communications, and physiological signal families. Custom waveforms editable in upper-computer software.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExpression output\u003c\/strong\u003e — mathematical expressions across 18 function types (trigonometric, exponential, logarithmic, polynomial, etc.) describe the output waveform directly without a precomputed sample buffer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChannel coupling and channel combination\u003c\/strong\u003e — frequency, amplitude, or phase changes on one channel auto-adjust the other; output of both channels can be summed for dual-tone and multi-frequency stimulus.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHarmonic output — built-in 16th-order generator\u003c\/strong\u003e — harmonic synthesis without external mixer. Useful for power-system harmonic stimulus.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLAN, USB-Device, USB-Host\u003c\/strong\u003e — SCPI control over LAN or USB, plus direct thumb-drive waveform upload via USB-Host.\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eUNI-T UTG2122B Details\u003c\/h2\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003e120 MHz Multi-Waveform Output\u003c\/h3\u003e\n\u003cp\u003eThe UTG2122B produces nine waveform shapes at up to 120 MHz top-end on both channels: sine, square, ramp, pulse, harmonic, noise, DC, expression-defined, and arbitrary. Square and pulse output extend to 30 MHz with adjustable rise \/ fall time (typical 11 ns at 1 Vpp, 50 Ω) and pulse-wave jitter below 150 ps. Output amplitude is 1 mVpp to 10 Vpp into 50 Ω (2 mVpp to 20 Vpp into high-Z) across the full output range.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-utg2122b-120mhz-2ch-advanced-series-arbitrary-waveform-generator-mwave\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTG2000B-120MHz.png\" alt=\"UTG2122B multi-waveform output up to 120 MHz\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eNine waveform shapes available on both channels with 120 MHz top-end sine and 30 MHz square \/ pulse output.\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-utg2122b-120mhz-2ch-advanced-series-arbitrary-waveform-generator-expr\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTG2000B-Expressions.png\" alt=\"UTG2122B expression-defined waveform output\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eMathematical expressions describe the output waveform directly — sine, exponential, logarithmic, polynomial, and 14 other function types can be combined.\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003ch3\u003eExpression Output\u003c\/h3\u003e\n\u003cp\u003eEighteen function types — trigonometric, exponential, logarithmic, polynomial, absolute-value, and others — can be combined in column-method expressions to define the output waveform directly, without precomputing a sample buffer. The expression engine renders the result at the generator's full sample-rate \/ vertical-resolution capability. Useful for academic and research work where the waveform definition is the experimental variable.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003e13 Modulation Types\u003c\/h3\u003e\n\u003cp\u003eAM, FM, PM, ASK, FSK, PSK, BPSK, QPSK, OSK, SUM, DSB-AM, QAM, and PWM with internal or external source. The full PSK \/ BPSK \/ QPSK \/ OSK set supports communications-class digital-modulation stimulus; SUM and DSB-AM extend into analog double-sideband work; QAM adds quadrature amplitude modulation across configurable constellation depths. Modulating source is internal (sine, square, ramp, noise, arbitrary) or external via the analog modulation input.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-utg2122b-120mhz-2ch-advanced-series-arbitrary-waveform-generator-mod\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTG2000B-Modulation.png\" alt=\"UTG2122B 13-type modulation menu\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eThirteen analog and digital modulation types, internal or external source.\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-utg2122b-120mhz-2ch-advanced-series-arbitrary-waveform-generator-arb\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTG2000B-Arb.png\" alt=\"UTG2122B 160 built-in arbitrary waveform library\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003e160 built-in waveforms covering measurement, communications, automotive, and physiological signal families.\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003ch3\u003e160 Built-in Arbitrary Waveforms\u003c\/h3\u003e\n\u003cp\u003eThe waveform library covers standard measurement shapes (Sinc, Gaussian, Lorentz, exponential rise \/ fall, etc.), communications stimulus (PRBS, multi-tone, ramp-modulated), automotive electrical waveforms (ignition, AC ripple, motor-back-EMF), and physiological signals (cardiac, respiratory). Up to 16 Mpts arbitrary-waveform memory per channel supports long-form custom stimulus uploaded via USB-Host or PC software.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eChannel Combination \u0026amp; Coupling\u003c\/h3\u003e\n\u003cp\u003eThe UTG2122B provides two channel-pairing modes. \u003cstrong\u003eChannel combination\u003c\/strong\u003e sums the two-channel outputs into a single output port for dual-tone, multi-frequency, or noise-plus-signal stimulus. \u003cstrong\u003eChannel coupling\u003c\/strong\u003e ties the channels parametrically — when frequency, amplitude, or phase is changed on one channel, the other auto-adjusts by the configured offset or ratio. Useful for differential signal generation and tracked sweep across a defined relationship.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-utg2122b-120mhz-2ch-advanced-series-arbitrary-waveform-generator-couple\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTG2000B-Coupling.png\" alt=\"UTG2122B channel combination and coupling\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eTwo channel-pairing modes: output summing (combination) and parametric tracking (coupling).\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-utg2122b-120mhz-2ch-advanced-series-arbitrary-waveform-generator-sweep\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTG2000B-Sweep.png\" alt=\"UTG2122B frequency sweep and harmonic output\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eLinear and logarithmic frequency sweep across the full 120 MHz output range plus 16th-order harmonic synthesis.\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003ch3\u003eFrequency Sweep \u0026amp; 16th-Order Harmonic Output\u003c\/h3\u003e\n\u003cp\u003eLinear and logarithmic frequency sweep modes cover the full 120 MHz output range with sweep time from 1 ms to 500 s. Internal, external, or manual trigger source. The built-in 16th-order harmonic generator synthesizes the fundamental plus harmonics 2 through 16 with adjustable amplitude and phase per order — useful for power-system harmonic stimulus, filter characterization, and academic harmonic-distortion teaching without an external mixer or summing amplifier.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eApplications\u003c\/h2\u003e\n\u003cp\u003eThe Advanced-Series envelope — 16 Mpts memory, LAN connectivity, 10 MHz reference In \/ Out, 13 modulation types, channel coupling — positions the UTG2000B family for benchtop work where the entry-tier doesn't reach but the elite-tier is over-specified.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommunications-stimulus development\u003c\/strong\u003e — BPSK, QPSK, OSK, QAM digital modulation; SUM and DSB-AM analog modulation. ASK \/ FSK \/ PSK with configurable hop rate and depth.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLong-form arbitrary playback\u003c\/strong\u003e — 16 Mpts memory holds extended protocol streams, sensor-emulation traces, and physiological waveforms that overflow a 4 kpts buffer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower-system harmonic testing\u003c\/strong\u003e — 16th-order harmonic generator drives filter, transformer, and meter harmonic-distortion characterization without external mixing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDifferential signal generation\u003c\/strong\u003e — channel coupling produces phase-tracked, amplitude-tracked, or frequency-tracked output pairs for differential-circuit stimulus.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomated test (ATE)\u003c\/strong\u003e — LAN-based SCPI control with 10 MHz reference clock In and Out for synchronized multi-instrument benches.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAcademic and research\u003c\/strong\u003e — expression-defined waveform output supports experimental designs where the waveform mathematics is the experimental variable.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eAccessories and Family Options\u003c\/h2\u003e\n\u003ch3\u003eIncluded with Every Unit\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePower cord conforming to destination country standard\u003c\/li\u003e\n\u003cli\u003eUSB cable (UT-D14)\u003c\/li\u003e\n\u003cli\u003eBNC-BNC cable (UT-L45)\u003c\/li\u003e\n\u003cli\u003eBNC-to-alligator clip cable (UT-L02)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFamily Members\u003c\/h3\u003e\n\u003cp\u003eThe UTG2000B Advanced-Series consists of three SKUs sharing the same chassis, sample rate, modulation set, burst modes, and 16-bit DAC:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUTG2062B\u003c\/strong\u003e — 60 MHz sine \/ 25 MHz square\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUTG2082B\u003c\/strong\u003e — 80 MHz sine \/ 25 MHz square\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUTG2122B\u003c\/strong\u003e — 120 MHz sine \/ 30 MHz square (this product)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eWhat waveform shapes are available, and how does the expression-output feature work?\u003c\/p\u003e\n\u003cp\u003eNine standard shapes: sine, square, ramp, pulse, harmonic, noise, DC, expression-defined, and arbitrary. Expression output describes the waveform mathematically — the user enters a function definition combining sine, exponential, logarithmic, polynomial, and other operations across 18 function types, and the UTG2122B renders the result at the full sample-rate \/ DAC resolution without a precomputed buffer. Useful when the waveform shape is the experimental variable rather than a fixed library entry.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eHow does channel combination differ from channel coupling?\u003c\/p\u003e\n\u003cp\u003eChannel combination sums the two-channel outputs into a single output port — useful for dual-tone, multi-frequency, or signal-plus-noise stimulus generated within a single waveform generator. Channel coupling ties the channels parametrically: when frequency, amplitude, or phase changes on one channel, the other auto-adjusts by the configured offset or ratio. Coupling preserves two independent output ports but synchronizes their parameters.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eWhat is the harmonic generator and when would I use it?\u003c\/p\u003e\n\u003cp\u003eThe harmonic generator synthesizes the fundamental output plus harmonics 2 through 16 (16th-order) with adjustable amplitude and phase per order. The output is a single composite waveform with the configured harmonic content — no external mixer or summing amplifier is needed. Common applications include power-system harmonic-distortion stimulus, filter characterization, and academic teaching of harmonic synthesis. The UTG2122B generates the fundamental anywhere within the 120 MHz output range, with harmonic content capped by the sample-rate and output-bandwidth limits.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eCan the UTG2000B series work in a multi-instrument synchronized bench?\u003c\/p\u003e\n\u003cp\u003eYes. The 10 MHz reference clock input accepts an external timebase from an oscilloscope, signal generator, or atomic clock; the 10 MHz reference clock output supplies the same to downstream instruments. LAN control via SCPI plus external trigger and modulation inputs round out the ATE integration story. All three SKUs in the series support the same connectivity envelope.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eHow much arbitrary-waveform memory does the UTG2000B have, and how is it loaded?\u003c\/p\u003e\n\u003cp\u003e16 Mpts per channel of arbitrary waveform memory. Custom waveforms are created in the upper-computer software (drawing tool, mathematical expression, or imported sample file) and uploaded to the instrument via LAN, USB-Device, or USB-Host. USB-Host accepts standard USB thumb drives directly — waveforms exported from the upper computer can be loaded into the instrument without a PC connection. 160 built-in waveforms cover the common measurement, communications, automotive, and physiological signal families.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\u003ca id=\"lb-utg2122b-120mhz-2ch-advanced-series-arbitrary-waveform-generator-mwave\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTG2000B-120MHz.png\" alt=\"UTG2122B multi-waveform output\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003e120 MHz top-end sine and 30 MHz square \/ pulse output across nine waveform shapes\u003c\/span\u003e\n\u003c\/a\u003e\n\u003ca id=\"lb-utg2122b-120mhz-2ch-advanced-series-arbitrary-waveform-generator-expr\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTG2000B-Expressions.png\" alt=\"UTG2122B expression output\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003e18 function types describe the output waveform mathematically — no precomputed sample buffer required\u003c\/span\u003e\n\u003c\/a\u003e\n\u003ca id=\"lb-utg2122b-120mhz-2ch-advanced-series-arbitrary-waveform-generator-mod\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTG2000B-Modulation.png\" alt=\"UTG2122B 13-type modulation\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eAM, FM, PM, ASK, FSK, PSK, BPSK, QPSK, OSK, SUM, DSB-AM, QAM, PWM — internal or external source\u003c\/span\u003e\n\u003c\/a\u003e\n\u003ca id=\"lb-utg2122b-120mhz-2ch-advanced-series-arbitrary-waveform-generator-arb\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTG2000B-Arb.png\" alt=\"UTG2122B 160 built-in arbitrary waveforms\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003e160 waveform library covering measurement, communications, automotive, and physiological signal families\u003c\/span\u003e\n\u003c\/a\u003e\n\u003ca id=\"lb-utg2122b-120mhz-2ch-advanced-series-arbitrary-waveform-generator-couple\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTG2000B-Coupling.png\" alt=\"UTG2122B channel combination and coupling\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eChannel combination sums outputs; channel coupling tracks frequency \/ amplitude \/ phase parametrically\u003c\/span\u003e\n\u003c\/a\u003e\n\u003ca id=\"lb-utg2122b-120mhz-2ch-advanced-series-arbitrary-waveform-generator-sweep\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTG2000B-Sweep.png\" alt=\"UTG2122B sweep and harmonic output\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eLinear and logarithmic sweep across 120 MHz plus 16th-order harmonic synthesis\u003c\/span\u003e\n\u003c\/a\u003e","brand":"UNI-T","offers":[{"title":"Default Title","offer_id":46698316103964,"sku":"181120080332X","price":551.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UTG2122B_Cables.jpg?v=1720807269"},{"product_id":"utg2082b","title":"UTG2082B 80MHz 2Ch Advanced-Series Arbitrary Waveform Generator","description":"\u003ch1\u003eUNI-T UTG2082B 80 MHz 2Ch Arbitrary Waveform Generator: 16-Bit Dual-Channel Bench Function Generator\u003c\/h1\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eUNI-T UTG2082B\u003c\/strong\u003e is a 80 MHz dual-channel arbitrary waveform generator built around a 16-bit DAC, 320 MSa\/s sample rate, and a 16 Mpts arbitrary-waveform memory depth. The Advanced-Series chassis adds LAN connectivity, a 10 MHz external reference clock input and output, and a wider modulation envelope — 13 analog and digital modulation types including QAM and the full BPSK \/ QPSK \/ OSK \/ DSB-AM set — on top of the Classic-Series feature set.\u003c\/p\u003e\n\u003cp\u003e25 MHz square \/ pulse output, 1 µHz frequency resolution across the full 80 MHz output range, harmonic distortion below 0.2%, a 6-bit hardware frequency counter (100 mHz to 200 MHz), and 160 built-in arbitrary waveforms. Sine, square, ramp, pulse, harmonic (up to 16th order), expression-defined, noise, DC, and arbitrary waveform shapes — with channel-coupling and channel-combination functions for dual-channel work that needs coordinated frequency, amplitude, or phase relationships.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cdiv class=\"product-key-features\"\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e80 MHz sine \/ 25 MHz square \u0026amp; pulse\u003c\/strong\u003e — dual-channel output with 1 µHz frequency resolution.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e16-bit vertical resolution, 320 MSa\/s sample rate\u003c\/strong\u003e — 65,536 amplitude levels; supports clean waveform reconstruction across the full output range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e16 Mpts arbitrary waveform memory\u003c\/strong\u003e — 4,000× the depth of typical 4 kpts entry-tier generators. Supports long-form arbitrary playback for protocol-stream emulation and complex stimulus.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e13 modulation types\u003c\/strong\u003e — AM, FM, PM, ASK, FSK, PSK, BPSK, QPSK, OSK, SUM, DSB-AM, QAM, PWM with internal and external source.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e160 built-in arbitrary waveforms\u003c\/strong\u003e — common shapes across measurement, communications, and physiological signal families. Custom waveforms editable in upper-computer software.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExpression output\u003c\/strong\u003e — mathematical expressions across 18 function types (trigonometric, exponential, logarithmic, polynomial, etc.) describe the output waveform directly without a precomputed sample buffer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChannel coupling and channel combination\u003c\/strong\u003e — frequency, amplitude, or phase changes on one channel auto-adjust the other; output of both channels can be summed for dual-tone and multi-frequency stimulus.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHarmonic output — built-in 16th-order generator\u003c\/strong\u003e — harmonic synthesis without external mixer. Useful for power-system harmonic stimulus.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLAN, USB-Device, USB-Host\u003c\/strong\u003e — SCPI control over LAN or USB, plus direct thumb-drive waveform upload via USB-Host.\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eUNI-T UTG2082B Details\u003c\/h2\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003e80 MHz Multi-Waveform Output\u003c\/h3\u003e\n\u003cp\u003eThe UTG2082B produces nine waveform shapes at up to 80 MHz top-end on both channels: sine, square, ramp, pulse, harmonic, noise, DC, expression-defined, and arbitrary. Square and pulse output extend to 25 MHz with adjustable rise \/ fall time (typical 12 ns at 1 Vpp, 50 Ω) and pulse-wave jitter below 150 ps. Output amplitude is 1 mVpp to 10 Vpp into 50 Ω (2 mVpp to 20 Vpp into high-Z) across the full output range.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-utg2082b-80mhz-2ch-advanced-series-arbitrary-waveform-generator-mwave\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTG2000B-120MHz.png\" alt=\"UTG2082B multi-waveform output up to 80 MHz\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eNine waveform shapes available on both channels with 80 MHz top-end sine and 25 MHz square \/ pulse output.\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-utg2082b-80mhz-2ch-advanced-series-arbitrary-waveform-generator-expr\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTG2000B-Expressions.png\" alt=\"UTG2082B expression-defined waveform output\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eMathematical expressions describe the output waveform directly — sine, exponential, logarithmic, polynomial, and 14 other function types can be combined.\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003ch3\u003eExpression Output\u003c\/h3\u003e\n\u003cp\u003eEighteen function types — trigonometric, exponential, logarithmic, polynomial, absolute-value, and others — can be combined in column-method expressions to define the output waveform directly, without precomputing a sample buffer. The expression engine renders the result at the generator's full sample-rate \/ vertical-resolution capability. Useful for academic and research work where the waveform definition is the experimental variable.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003e13 Modulation Types\u003c\/h3\u003e\n\u003cp\u003eAM, FM, PM, ASK, FSK, PSK, BPSK, QPSK, OSK, SUM, DSB-AM, QAM, and PWM with internal or external source. The full PSK \/ BPSK \/ QPSK \/ OSK set supports communications-class digital-modulation stimulus; SUM and DSB-AM extend into analog double-sideband work; QAM adds quadrature amplitude modulation across configurable constellation depths. Modulating source is internal (sine, square, ramp, noise, arbitrary) or external via the analog modulation input.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-utg2082b-80mhz-2ch-advanced-series-arbitrary-waveform-generator-mod\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTG2000B-Modulation.png\" alt=\"UTG2082B 13-type modulation menu\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eThirteen analog and digital modulation types, internal or external source.\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-utg2082b-80mhz-2ch-advanced-series-arbitrary-waveform-generator-arb\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTG2000B-Arb.png\" alt=\"UTG2082B 160 built-in arbitrary waveform library\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003e160 built-in waveforms covering measurement, communications, automotive, and physiological signal families.\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003ch3\u003e160 Built-in Arbitrary Waveforms\u003c\/h3\u003e\n\u003cp\u003eThe waveform library covers standard measurement shapes (Sinc, Gaussian, Lorentz, exponential rise \/ fall, etc.), communications stimulus (PRBS, multi-tone, ramp-modulated), automotive electrical waveforms (ignition, AC ripple, motor-back-EMF), and physiological signals (cardiac, respiratory). Up to 16 Mpts arbitrary-waveform memory per channel supports long-form custom stimulus uploaded via USB-Host or PC software.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eChannel Combination \u0026amp; Coupling\u003c\/h3\u003e\n\u003cp\u003eThe UTG2082B provides two channel-pairing modes. \u003cstrong\u003eChannel combination\u003c\/strong\u003e sums the two-channel outputs into a single output port for dual-tone, multi-frequency, or noise-plus-signal stimulus. \u003cstrong\u003eChannel coupling\u003c\/strong\u003e ties the channels parametrically — when frequency, amplitude, or phase is changed on one channel, the other auto-adjusts by the configured offset or ratio. Useful for differential signal generation and tracked sweep across a defined relationship.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-utg2082b-80mhz-2ch-advanced-series-arbitrary-waveform-generator-couple\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTG2000B-Coupling.png\" alt=\"UTG2082B channel combination and coupling\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eTwo channel-pairing modes: output summing (combination) and parametric tracking (coupling).\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-utg2082b-80mhz-2ch-advanced-series-arbitrary-waveform-generator-sweep\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTG2000B-Sweep.png\" alt=\"UTG2082B frequency sweep and harmonic output\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eLinear and logarithmic frequency sweep across the full 80 MHz output range plus 16th-order harmonic synthesis.\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003ch3\u003eFrequency Sweep \u0026amp; 16th-Order Harmonic Output\u003c\/h3\u003e\n\u003cp\u003eLinear and logarithmic frequency sweep modes cover the full 80 MHz output range with sweep time from 1 ms to 500 s. Internal, external, or manual trigger source. The built-in 16th-order harmonic generator synthesizes the fundamental plus harmonics 2 through 16 with adjustable amplitude and phase per order — useful for power-system harmonic stimulus, filter characterization, and academic harmonic-distortion teaching without an external mixer or summing amplifier.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eApplications\u003c\/h2\u003e\n\u003cp\u003eThe Advanced-Series envelope — 16 Mpts memory, LAN connectivity, 10 MHz reference In \/ Out, 13 modulation types, channel coupling — positions the UTG2000B family for benchtop work where the entry-tier doesn't reach but the elite-tier is over-specified.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommunications-stimulus development\u003c\/strong\u003e — BPSK, QPSK, OSK, QAM digital modulation; SUM and DSB-AM analog modulation. ASK \/ FSK \/ PSK with configurable hop rate and depth.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLong-form arbitrary playback\u003c\/strong\u003e — 16 Mpts memory holds extended protocol streams, sensor-emulation traces, and physiological waveforms that overflow a 4 kpts buffer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower-system harmonic testing\u003c\/strong\u003e — 16th-order harmonic generator drives filter, transformer, and meter harmonic-distortion characterization without external mixing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDifferential signal generation\u003c\/strong\u003e — channel coupling produces phase-tracked, amplitude-tracked, or frequency-tracked output pairs for differential-circuit stimulus.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomated test (ATE)\u003c\/strong\u003e — LAN-based SCPI control with 10 MHz reference clock In and Out for synchronized multi-instrument benches.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAcademic and research\u003c\/strong\u003e — expression-defined waveform output supports experimental designs where the waveform mathematics is the experimental variable.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eAccessories and Family Options\u003c\/h2\u003e\n\u003ch3\u003eIncluded with Every Unit\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePower cord conforming to destination country standard\u003c\/li\u003e\n\u003cli\u003eUSB cable (UT-D14)\u003c\/li\u003e\n\u003cli\u003eBNC-BNC cable (UT-L45)\u003c\/li\u003e\n\u003cli\u003eBNC-to-alligator clip cable (UT-L02)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFamily Members\u003c\/h3\u003e\n\u003cp\u003eThe UTG2000B Advanced-Series consists of three SKUs sharing the same chassis, sample rate, modulation set, burst modes, and 16-bit DAC:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUTG2062B\u003c\/strong\u003e — 60 MHz sine \/ 25 MHz square\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUTG2082B\u003c\/strong\u003e — 80 MHz sine \/ 25 MHz square (this product)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUTG2122B\u003c\/strong\u003e — 120 MHz sine \/ 30 MHz square\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eWhat waveform shapes are available, and how does the expression-output feature work?\u003c\/p\u003e\n\u003cp\u003eNine standard shapes: sine, square, ramp, pulse, harmonic, noise, DC, expression-defined, and arbitrary. Expression output describes the waveform mathematically — the user enters a function definition combining sine, exponential, logarithmic, polynomial, and other operations across 18 function types, and the UTG2082B renders the result at the full sample-rate \/ DAC resolution without a precomputed buffer. Useful when the waveform shape is the experimental variable rather than a fixed library entry.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eHow does channel combination differ from channel coupling?\u003c\/p\u003e\n\u003cp\u003eChannel combination sums the two-channel outputs into a single output port — useful for dual-tone, multi-frequency, or signal-plus-noise stimulus generated within a single waveform generator. Channel coupling ties the channels parametrically: when frequency, amplitude, or phase changes on one channel, the other auto-adjusts by the configured offset or ratio. Coupling preserves two independent output ports but synchronizes their parameters.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eWhat is the harmonic generator and when would I use it?\u003c\/p\u003e\n\u003cp\u003eThe harmonic generator synthesizes the fundamental output plus harmonics 2 through 16 (16th-order) with adjustable amplitude and phase per order. The output is a single composite waveform with the configured harmonic content — no external mixer or summing amplifier is needed. Common applications include power-system harmonic-distortion stimulus, filter characterization, and academic teaching of harmonic synthesis. The UTG2082B generates the fundamental anywhere within the 80 MHz output range, with harmonic content capped by the sample-rate and output-bandwidth limits.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eCan the UTG2000B series work in a multi-instrument synchronized bench?\u003c\/p\u003e\n\u003cp\u003eYes. The 10 MHz reference clock input accepts an external timebase from an oscilloscope, signal generator, or atomic clock; the 10 MHz reference clock output supplies the same to downstream instruments. LAN control via SCPI plus external trigger and modulation inputs round out the ATE integration story. All three SKUs in the series support the same connectivity envelope.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eHow much arbitrary-waveform memory does the UTG2000B have, and how is it loaded?\u003c\/p\u003e\n\u003cp\u003e16 Mpts per channel of arbitrary waveform memory. Custom waveforms are created in the upper-computer software (drawing tool, mathematical expression, or imported sample file) and uploaded to the instrument via LAN, USB-Device, or USB-Host. USB-Host accepts standard USB thumb drives directly — waveforms exported from the upper computer can be loaded into the instrument without a PC connection. 160 built-in waveforms cover the common measurement, communications, automotive, and physiological signal families.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\u003ca id=\"lb-utg2082b-80mhz-2ch-advanced-series-arbitrary-waveform-generator-mwave\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTG2000B-120MHz.png\" alt=\"UTG2082B multi-waveform output\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003e80 MHz top-end sine and 25 MHz square \/ pulse output across nine waveform shapes\u003c\/span\u003e\n\u003c\/a\u003e\n\u003ca id=\"lb-utg2082b-80mhz-2ch-advanced-series-arbitrary-waveform-generator-expr\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTG2000B-Expressions.png\" alt=\"UTG2082B expression output\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003e18 function types describe the output waveform mathematically — no precomputed sample buffer required\u003c\/span\u003e\n\u003c\/a\u003e\n\u003ca id=\"lb-utg2082b-80mhz-2ch-advanced-series-arbitrary-waveform-generator-mod\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTG2000B-Modulation.png\" alt=\"UTG2082B 13-type modulation\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eAM, FM, PM, ASK, FSK, PSK, BPSK, QPSK, OSK, SUM, DSB-AM, QAM, PWM — internal or external source\u003c\/span\u003e\n\u003c\/a\u003e\n\u003ca id=\"lb-utg2082b-80mhz-2ch-advanced-series-arbitrary-waveform-generator-arb\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTG2000B-Arb.png\" alt=\"UTG2082B 160 built-in arbitrary waveforms\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003e160 waveform library covering measurement, communications, automotive, and physiological signal families\u003c\/span\u003e\n\u003c\/a\u003e\n\u003ca id=\"lb-utg2082b-80mhz-2ch-advanced-series-arbitrary-waveform-generator-couple\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTG2000B-Coupling.png\" alt=\"UTG2082B channel combination and coupling\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eChannel combination sums outputs; channel coupling tracks frequency \/ amplitude \/ phase parametrically\u003c\/span\u003e\n\u003c\/a\u003e\n\u003ca id=\"lb-utg2082b-80mhz-2ch-advanced-series-arbitrary-waveform-generator-sweep\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTG2000B-Sweep.png\" alt=\"UTG2082B sweep and harmonic output\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eLinear and logarithmic sweep across 80 MHz plus 16th-order harmonic synthesis\u003c\/span\u003e\n\u003c\/a\u003e","brand":"UNI-T","offers":[{"title":"Default Title","offer_id":46698346709276,"sku":"181120080331X","price":495.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UTG2082B_Cables.jpg?v=1720807278"},{"product_id":"uts3036b","title":"UTS3036B 3.6GHz Performance-Series Spectrum Analyzer","description":"\u003ch1\u003eUNI-T UTS3036B 3.6GHz Performance-Series Spectrum Analyzer: 3.6 GHz Performance Analyzer (TG-Upgradeable)\u003c\/h1\u003e\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eUNI-T UTS3036B Performance-Series Spectrum Analyzer\u003c\/strong\u003e covers \u003cstrong\u003e9 kHz – 3.6 GHz\u003c\/strong\u003e with a 10.1-inch capacitive multi-touch display, a 1 Hz resolution-bandwidth floor, and up to 40,001 sweep points. It targets the sub-3.6 GHz bench measurement workload — communications module verification, IoT and wireless development, harmonic and spurious testing — with the option to add a tracking generator in the field when your work demands scalar transmission measurements.\u003c\/p\u003e\n\u003cp\u003eA typical displayed average noise level of \u003cstrong\u003e-161 dBm\/Hz\u003c\/strong\u003e (preamp on) and phase noise of \u003cstrong\u003e\u0026lt;-98 dBc\/Hz\u003c\/strong\u003e at a 10 kHz offset deliver the dynamic range needed for serious signal characterization in the sub-3.6 GHz band. Standard interfaces include HDMI 1.4 display output, USB-A 3.0 (Host), USB-B 2.0 (Device), and Gigabit LAN with full SCPI support — the UTS3036B drops into an automated test rack as easily as it sits on a development bench.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cdiv class=\"product-key-features\"\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e9 kHz – 3.6 GHz frequency coverage\u003c\/strong\u003e — sub-3.6 GHz for general RF dev, communications, harmonic surveys, and EMI pre-compliance work\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e-161 dBm\/Hz typical DANL\u003c\/strong\u003e (preamp on) — sensitive enough to resolve low-level signals, spurs, and harmonic energy near the noise floor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u0026lt;-98 dBc\/Hz phase noise @ 10 kHz offset\u003c\/strong\u003e (typical, 1 GHz carrier) — clean enough for close-in spectral measurements and modulated-signal analysis\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1 Hz – 3 MHz RBW\u003c\/strong\u003e in 1-3-10 steps — fine resolution control all the way down to a 1 Hz floor, with FFT mode for faster narrowband sweeps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e40,001 sweep points\u003c\/strong\u003e — deep trace detail (4× the count of UNI-T's entry tier) for catching signals that coarser analyzers miss\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e10.1-inch capacitive multi-touch display\u003c\/strong\u003e (1280 × 800) — pinch, drag, and tap to set markers, with full mouse\/keyboard support via USB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSix traces with five detector modes\u003c\/strong\u003e — Sample, Peak, Negative, Normal, Average; Clear\/Write, Average, Max Hold, Min Hold trace types\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eField-upgradeable tracking generator\u003c\/strong\u003e — add scalar network analysis later by ordering the \u003ca href=\"\/products\/uts3000b-tg\"\u003eUTS3000-TG\u003c\/a\u003e option (TG range matches analyzer frequency: 100 kHz – 3.6 GHz)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull SCPI remote control\u003c\/strong\u003e — over USB-Device (USB-B 2.0) and LAN VXI-11 (10\/100\/1000 Base) for automated test, production lines, and unattended data collection\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOption-extensible\u003c\/strong\u003e — add \u003ca href=\"\/products\/uts3000b-ama\"\u003eUTS3000-AMA\u003c\/a\u003e (analog demodulation), \u003ca href=\"\/products\/uts3000b-amk\"\u003eUTS3000-AMK\u003c\/a\u003e (advanced measurement kit), or \u003ca href=\"\/products\/uts3000b-emi\"\u003eUTS3000-EMI\u003c\/a\u003e (EMI pre-compliance) as your work scope grows\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt to last in working environments\u003c\/strong\u003e — forced-air cooling with a user-removable dust filter to keep the internals clean across years of bench use\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eUNI-T UTS3036B Details\u003c\/h2\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eFrequency Coverage (9 kHz – 3.6 GHz)\u003c\/h3\u003e\n\u003cp\u003eThe UTS3036B sweeps continuously from 9 kHz up to \u003cstrong\u003e3.6 GHz\u003c\/strong\u003e, with 1 Hz frequency resolution and marker counter accuracy on the same order. The 3.6 GHz ceiling covers all common consumer and IoT wireless bands — 2.4 GHz Wi-Fi\/Bluetooth\/ZigBee, 5 GHz lower-band edge cases, Sub-3.5 GHz cellular (including parts of n78\/n77), and a strong harmonic margin for sub-1.8 GHz transmitter work. A 1 Hz frequency reference calibration accuracy with \u0026lt;1 ppm temperature stability keeps measurements steady across the calibration cycle.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-uts3036b-3-6ghz-performance-series-spectrum-analyzer-sweep\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTS3000B-Sweep.png\" alt=\"UNI-T UTS3036B Sweep Display\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eUNI-T UTS3036B 40,001-Point Sweep\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eSensitivity (DANL as low as -161 dBm\/Hz)\u003c\/h3\u003e\n\u003cp\u003eWeak-signal testing depends on how quiet the analyzer itself is. With the preamp on, the UTS3036B reaches a typical displayed average noise level of \u003cstrong\u003e-161 dBm\/Hz\u003c\/strong\u003e in the 200 MHz – 1.5 GHz band — low enough to resolve faint emissions, identify harmonic energy well below the carrier, and characterize signals near the noise floor. Five detector modes (Sample, Peak, Negative, Normal, Average) and four trace types give you the flexibility to tune what the trace shows for any measurement context. A switchable 20 dB preamp adds gain when you need it, and the input attenuator adjusts in 1 dB steps from 0 to 51 dB.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-uts3036b-3-6ghz-performance-series-spectrum-analyzer-sensitivity\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTS3000B-Sensitivity.png\" alt=\"UNI-T UTS3036B Sensitivity\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eUNI-T UTS3036B -161 dBm\/Hz DANL\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch3\u003ePhase Noise (\u0026lt;-98 dBc\/Hz at 10 kHz offset)\u003c\/h3\u003e\n\u003cp\u003eClean local-oscillator performance matters when you're working close to a strong carrier — modulated signal analysis, narrowband interference identification, or oscillator-quality measurement. With \u003cstrong\u003etypical phase noise of \u0026lt;-98 dBc\/Hz at a 10 kHz offset\u003c\/strong\u003e from a 1 GHz carrier (measured with a 1 kHz RBW and 10 Hz VBW), the UTS3036B resolves close-in spectral content without the phase noise pedestal washing it out. Typical performance at a 1 MHz offset is in the -112 to -116 dBc\/Hz range — well-suited for general modulated-signal and oscillator work.\u003c\/p\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003e1 Hz – 3 MHz Resolution Bandwidth\u003c\/h3\u003e\n\u003cp\u003eResolution bandwidth in 1-3-10 steps, from 1 Hz all the way to \u003cstrong\u003e3 MHz\u003c\/strong\u003e, gives you the right sweep speed \/ selectivity trade-off for any measurement. Drop the RBW to 1 Hz to separate signals closer together in frequency than most mid-tier analyzers can manage; widen it for fast high-level surveys. Bandwidth accuracy holds within 5% nominal, and switching between resolution settings introduces only ±0.2 dB relative amplitude uncertainty. The shape factor (-60 dB \/ -3 dB ratio) is \u0026lt;4.8:1 nominal — tight skirts that help you separate close-in signals of unequal amplitude. FFT sweep mode is also available for faster narrowband measurements.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-uts3036b-3-6ghz-performance-series-spectrum-analyzer-selectivity\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTS3000B-Selectivity.png\" alt=\"UNI-T UTS3036B Selectivity\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eUNI-T UTS3036B RBW Selectivity\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch3\u003e40,001 Sweep Points\u003c\/h3\u003e\n\u003cp\u003eMore points across a trace means finer frequency resolution per pixel and a much better chance of catching signals that fall between coarser bins. The UTS3036B provides up to \u003cstrong\u003e40,001 sweep points per trace\u003c\/strong\u003e — four times the count of UNI-T's entry-tier UTS1000B series, and high enough to clearly distinguish closely-spaced signals, identify intermittent emissions, and read marker frequencies with confidence. Combined with six independent traces, you can simultaneously display raw, max-hold, min-hold, and averaged versions of the same span.\u003c\/p\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003e10.1-inch Multi-Touch Interface\u003c\/h3\u003e\n\u003cp\u003eThe UTS3036B uses a 10.1-inch capacitive multi-touch display (1280 × 800 HD resolution) for direct interaction with traces, markers, and menus. Pinch, drag, and zoom directly on the trace; set markers by tapping where you want them; navigate menus the way you'd expect on a modern tablet. For lab environments where a USB mouse or keyboard is more practical, the UTS3036B accepts those through the USB Host port. The touch UI cuts measurement setup time noticeably on day-to-day bench work — especially when you're repeatedly adjusting span, RBW, and marker positions across many sweeps.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-uts3036b-3-6ghz-performance-series-spectrum-analyzer-touch\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTS3000B-Touch.png\" alt=\"UNI-T UTS3036B Touch Interface\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eUNI-T UTS3036B 10.1-inch Multi-Touch UI\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch3\u003eMarker Suite (4 Markers, 5 Functions)\u003c\/h3\u003e\n\u003cp\u003eFour markers with three modes (Normal, Delta, Fixed) cover the basic measurement vocabulary — reading absolute level, computing delta between two points, locking a marker to a frequency for sweep-to-sweep comparison. Five built-in marker functions go further: \u003cstrong\u003eMarker Noise\u003c\/strong\u003e reads noise density in dBm\/Hz at the marker, \u003cstrong\u003eBand Power\u003c\/strong\u003e integrates total power over a user-defined band, \u003cstrong\u003eBand Density\u003c\/strong\u003e reports power per Hz across that band, \u003cstrong\u003eN dB\u003c\/strong\u003e auto-finds the points N dB down from a peak (useful for measuring -3 dB or -6 dB bandwidths), and \u003cstrong\u003eCounter\u003c\/strong\u003e reads frequency to 1 Hz resolution.\u003c\/p\u003e\n\u003ch3\u003eConnectivity (HDMI, USB, LAN, 10 MHz Ref)\u003c\/h3\u003e\n\u003cp\u003eA full set of standard rear-panel interfaces makes the UTS3036B easy to fit into any workflow:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRF Input:\u003c\/strong\u003e Type-N female, 50 Ω\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHDMI 1.4 display output\u003c\/strong\u003e — mirror the trace to an external monitor for shared review or training\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB-A 3.0 Host\u003c\/strong\u003e + \u003cstrong\u003eUSB-B 2.0 Device\u003c\/strong\u003e — thumb drive, mouse\/keyboard, and SCPI over USB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLAN VXI-11 (10\/100\/1000 Base, RJ-45)\u003c\/strong\u003e — networked remote control\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e10 MHz reference in\/out\u003c\/strong\u003e (BNC) — lock to an external timebase or share the internal reference\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExternal trigger input\u003c\/strong\u003e (TTL, BNC, rising\/falling edge)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSCPI Remote Control for Automated Test\u003c\/h3\u003e\n\u003cp\u003eThe UTS3036B responds to industry-standard SCPI commands over both USB-Device (USB-B 2.0) and LAN VXI-11 (RJ-45). That means it drops cleanly into pyvisa, LabVIEW, NI-MAX, or any other test framework that talks to standard instruments — no proprietary protocol layer to learn, no special drivers beyond a USB or LAN connection. Whether you're building a production test rig, automating a parametric sweep across DUTs, or running unattended overnight data collection, the interface scales the same way the rest of the bench does. The full SCPI command set is documented in the UTS3000B Programming Manual.\u003c\/p\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eTracking Generator Upgrade Path (UTS3000-TG Option)\u003c\/h3\u003e\n\u003cp\u003eThe UTS3036B chassis is provisioned for tracking generator hardware that you can add in the field by ordering the \u003ca href=\"\/products\/uts3000b-tg\"\u003e\u003cstrong\u003eUTS3000-TG\u003c\/strong\u003e\u003c\/a\u003e option. The TG range matches the analyzer's frequency: \u003cstrong\u003e100 kHz – 3.6 GHz\u003c\/strong\u003e. Output power is adjustable from -40 dBm to 0 dBm in 0.5 dB steps with ±3 dB flatness relative to 50 MHz. Once installed, the TG output appears on its own dedicated front-panel Type-N female 50 Ω connector.\u003c\/p\u003e\n\u003cp\u003eWhy this matters: a tracking generator turns the UTS3036B into a scalar network analyzer for transmission measurements. Sweep filters to read insertion loss and frequency response, characterize amplifier gain across a band, measure matching-network response, and check antenna return loss (with a directional coupler) — all without a separate signal generator. Many teams start with the UTS3036B for general spectrum work and add the TG option later when a project demands scalar transmission measurements.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-uts3036b-3-6ghz-performance-series-spectrum-analyzer-tg-upgrade\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTS3000B-Sweep-2.png\" alt=\"UNI-T UTS3036B Tracking Generator Output (with UTS3000-TG option)\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eUNI-T UTS3036B TG Output with UTS3000-TG Option\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eSoftware Options for Specialized Measurements\u003c\/h3\u003e\n\u003cp\u003eThe UTS3036B starts as a capable general-purpose spectrum analyzer and grows into specialized roles through software options — the instrument hardware is the same; the options unlock measurement modes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/products\/uts3000b-amk\"\u003eUTS3000-AMK\u003c\/a\u003e (Advanced Measurement Kit)\u003c\/strong\u003e — adds channel power, adjacent channel power (ACP), occupied bandwidth (OBW), time-domain power, carrier-to-noise ratio (CNR), third-order intercept (TOI), and harmonic measurements (up to the 10th harmonic), plus a spectrogram display for time-history visualization\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/products\/uts3000b-ama\"\u003eUTS3000-AMA\u003c\/a\u003e (Analog Demodulation)\u003c\/strong\u003e — AM and FM demodulation analysis with modulation rate, depth, and frequency offset measurements (20 Hz – 100 kHz modulation rate range)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/products\/uts3000b-emi\"\u003eUTS3000-EMI\u003c\/a\u003e (EMI Pre-Compliance)\u003c\/strong\u003e — CISPR-aligned QP\/AVG\/PEAK detectors, EMI band sweep, and limit-line analysis. Pairs with the optional \u003ca href=\"\/products\/uts-emi01-near-field-probe-kit\"\u003eUTS-EMI01 near-field probe kit\u003c\/a\u003e (3 mm to 10 cm probes, 30 MHz – 3 GHz) for board-level emission hunting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-uts3036b-3-6ghz-performance-series-spectrum-analyzer-options-emi\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTS3000B-EMI.png\" alt=\"UNI-T UTS3036B EMI Pre-Compliance with UTS-EMI01 Probes\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eUNI-T UTS3036B EMI Pre-Compliance Mode\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eBuilt for Working Lab Environments\u003c\/h3\u003e\n\u003cp\u003eA spectrum analyzer that lives next to soldering stations, drilling, and general bench work will breathe in dust over time. The UTS3036B addresses this with forced-air cooling and a \u003cstrong\u003euser-removable dust filter\u003c\/strong\u003e — pop it out, vacuum or blow it off, and slide it back. No tools, no service-center trip, no fan failures from dust accumulation. Operating range is 0 °C to +40 °C, storage to -20 °C \/ +70 °C, with full ±1 ppm timebase stability across the operational temperature range. The full IEC 61326 EMC compliance and EN 61010 safety qualification (with cETLus mark) round out a unit built to hold up across years of bench use.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-uts3036b-3-6ghz-performance-series-spectrum-analyzer-dust\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTS3000B-Dust.png\" alt=\"UNI-T UTS3036B Removable Dust Filter\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eUNI-T UTS3036B User-Removable Dust Filter\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ca id=\"lb-uts3036b-3-6ghz-performance-series-spectrum-analyzer-sweep\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTS3000B-Sweep.png\" alt=\"UNI-T UTS3036B Sweep Display\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eUNI-T UTS3036B 40,001-Point Sweep\u003c\/span\u003e\n\u003c\/a\u003e\n\u003ca id=\"lb-uts3036b-3-6ghz-performance-series-spectrum-analyzer-sensitivity\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTS3000B-Sensitivity.png\" alt=\"UNI-T UTS3036B Sensitivity\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eUNI-T UTS3036B -161 dBm\/Hz DANL\u003c\/span\u003e\n\u003c\/a\u003e\n\u003ca id=\"lb-uts3036b-3-6ghz-performance-series-spectrum-analyzer-selectivity\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTS3000B-Selectivity.png\" alt=\"UNI-T UTS3036B Selectivity\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eUNI-T UTS3036B RBW Selectivity\u003c\/span\u003e\n\u003c\/a\u003e\n\u003ca id=\"lb-uts3036b-3-6ghz-performance-series-spectrum-analyzer-touch\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTS3000B-Touch.png\" alt=\"UNI-T UTS3036B Touch Interface\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eUNI-T UTS3036B 10.1-inch Multi-Touch UI\u003c\/span\u003e\n\u003c\/a\u003e\n\u003ca id=\"lb-uts3036b-3-6ghz-performance-series-spectrum-analyzer-tg-upgrade\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTS3000B-Sweep-2.png\" alt=\"UNI-T UTS3036B Tracking Generator Output (with UTS3000-TG option)\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eUNI-T UTS3036B TG Output with UTS3000-TG Option\u003c\/span\u003e\n\u003c\/a\u003e\n\u003ca id=\"lb-uts3036b-3-6ghz-performance-series-spectrum-analyzer-options-emi\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTS3000B-EMI.png\" alt=\"UNI-T UTS3036B EMI Pre-Compliance with UTS-EMI01 Probes\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eUNI-T UTS3036B EMI Pre-Compliance Mode\u003c\/span\u003e\n\u003c\/a\u003e\n\u003ca id=\"lb-uts3036b-3-6ghz-performance-series-spectrum-analyzer-dust\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTS3000B-Dust.png\" alt=\"UNI-T UTS3036B Removable Dust Filter\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eUNI-T UTS3036B User-Removable Dust Filter\u003c\/span\u003e\n\u003c\/a\u003e\n\u003ch2\u003eApplications\u003c\/h2\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch3\u003eRF Design and Validation (sub-3.6 GHz)\u003c\/h3\u003e\n\u003cp\u003eCharacterize transmit spectrum, harmonics, spurious emissions, and channel power across the design workflow. The UTS3036B covers all the common 2.4 GHz workloads (Wi-Fi, BLE, ZigBee, Z-Wave, LoRa 2.4), 5 GHz Wi-Fi lower bands (Channel 36–48), sub-3.5 GHz cellular, and broad harmonic margin for transmitter work up through 1.8 GHz fundamentals. With the AMK option, ACP and OBW measurements add channel-respect verification for designs targeting tight regulatory band edges.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch3\u003eCommunications and IoT Module Verification\u003c\/h3\u003e\n\u003cp\u003eProduction engineering and incoming-inspection workflows for wireless modules — verify TX power, occupied bandwidth, harmonic emissions, and spurious responses against datasheet specs and regulatory limits. SCPI automation lets you build a repeatable production test station around the analyzer, with pass\/fail logging against limit lines.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch3\u003eEMI Pre-Compliance Investigation\u003c\/h3\u003e\n\u003cp\u003eCatch radiated and conducted emissions issues before sending boards to a full CISPR\/FCC compliance lab. With the \u003ca href=\"\/products\/uts3000b-emi\"\u003eUTS3000-EMI\u003c\/a\u003e option plus the \u003ca href=\"\/products\/uts-emi01-near-field-probe-kit\"\u003eUTS-EMI01 near-field probe kit\u003c\/a\u003e (3 mm to 10 cm probes, 30 MHz – 3 GHz), the UTS3036B becomes a board-level emission hunter — sweep with QP\/AVG\/PEAK detectors, overlay limit lines, and localize hot spots on the PCB before they cost you a failed compliance test.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch3\u003eFilter and Component Characterization\u003c\/h3\u003e\n\u003cp\u003eWith the \u003ca href=\"\/products\/uts3000b-tg\"\u003eUTS3000-TG\u003c\/a\u003e option installed, the UTS3036B adds scalar transmission measurements: insertion loss, gain, frequency response, and stopband rejection on filters, amplifiers, attenuators, and antennas. Sweep across \u003cstrong\u003e100 kHz – 3.6 GHz\u003c\/strong\u003e and read the response directly on the analyzer trace. Add a directional coupler for return-loss measurements on antennas and matching networks.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch3\u003eProduction Test and Quality Control\u003c\/h3\u003e\n\u003cp\u003eSCPI automation over USB or LAN (VXI-11) lets the UTS3036B drop into pyvisa, LabVIEW, or NI-TestStand workflows for repeatable production verification. Run end-of-line tests on transmitter modules, RF amplifier gain stages, oscillator output, or filter assemblies; log pass\/fail results against limit lines; and feed data into MES or QC databases. Six independent traces, max-hold detection, and 40,001-point sweeps give production-engineering teams the trace depth needed to catch intermittent issues that single-sweep tests miss.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch3\u003eRF Service, Repair, and Maintenance\u003c\/h3\u003e\n\u003cp\u003eA capable bench instrument for two-way radio shops, broadcast engineering, antenna service work, and field calibration support. Marker counter functions, harmonic measurements (with AMK), and the touch interface make routine service work quick. The 3.6 GHz ceiling covers commercial broadcast, public-safety and amateur radio, broadcast TV harmonics, and (on 3.6 GHz+ units) sub-6 GHz wireless infrastructure.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eAccessories and Family Options\u003c\/h2\u003e\n\u003ch3\u003eIncluded with Every Unit\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUTS3000B-series Spectrum Analyzer (UTS3036B)\u003c\/li\u003e\n\u003cli\u003ePower cord\u003c\/li\u003e\n\u003cli\u003eUSB cable (UT-D04)\u003c\/li\u003e\n\u003cli\u003eEnglish download guide\u003c\/li\u003e\n\u003cli\u003eMulti-language safety manual\u003c\/li\u003e\n\u003cli\u003eFactory calibration certificate\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eRecommended Software Options\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/uts3000b-tg\"\u003eUTS3000-TG\u003c\/a\u003e — Tracking Generator field-upgrade (100 kHz – 3.6 GHz) for scalar transmission measurements\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/uts3000b-amk\"\u003eUTS3000-AMK\u003c\/a\u003e — Advanced Measurement Kit (channel power, ACP, OBW, CNR, TOI, harmonics, spectrogram)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/uts3000b-ama\"\u003eUTS3000-AMA\u003c\/a\u003e — Analog Demodulation Analysis (AM and FM)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/uts3000b-emi\"\u003eUTS3000-EMI\u003c\/a\u003e — EMI Pre-Compliance (CISPR-aligned QP\/AVG\/PEAK detectors, limit-line analysis)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eRecommended Accessories\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/uts-emi01-near-field-probe-kit\"\u003eUTS-EMI01 Near-Field Probe Kit\u003c\/a\u003e — Four probes (30 MHz – 3 GHz, 3 mm to 10 cm resolution) for PCB-level emission hunting with the UTS3000-EMI option\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/ut-ck01-utility-kit\"\u003eUT-CK01 Utility Kit\u003c\/a\u003e — SMA\/N adapters, cables, and antennas for general RF setup\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/ut-w01-6ghz-n-n-rf-cable\"\u003eUT-W01-6GHz Cable\u003c\/a\u003e — N-to-N RF cable, 0.7 m, DC – 6 GHz\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/ut-w02-6ghz-n-sma-rf-cable\"\u003eUT-W02-6GHz Cable\u003c\/a\u003e — N-to-SMA RF cable, 0.7 m, DC – 6 GHz\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFamily Members\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/uts3021b-2-1ghz-performance-series-spectrum-analyzer\"\u003eUTS3021B\u003c\/a\u003e — 2.1 GHz, TG-upgradeable via UTS3000-TG option\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUTS3036B\u003c\/strong\u003e — 3.6 GHz, TG-upgradeable via UTS3000-TG option \u003cem\u003e(this product)\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/uts3084b-8-4ghz-performance-series-spectrum-analyzer\"\u003eUTS3084B\u003c\/a\u003e — 8.4 GHz, no TG\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/uts3084t-8-4ghz-performance-series-spectrum-analyzer-with-tracking-generator\"\u003eUTS3084T\u003c\/a\u003e — 8.4 GHz with integrated tracking generator\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eWhat's the DANL of the UTS3036B, and what does that mean for my measurements?\u003c\/p\u003e\n\u003cp\u003eThe UTS3036B reaches a typical displayed average noise level of \u003cstrong\u003e-161 dBm\/Hz\u003c\/strong\u003e with the preamp on in the 200 MHz – 1.5 GHz band. Practically: signals down around -120 dBm are visible above the noise floor with reasonable RBW settings (e.g., 1 kHz). For ultimate weak-signal work, narrow the RBW (each 10× reduction drops the noise floor by 10 dB) and enable averaging across multiple sweeps.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eCan I add a tracking generator to the UTS3036B later?\u003c\/p\u003e\n\u003cp\u003eYes. The UTS3036B chassis is provisioned for the \u003ca href=\"\/products\/uts3000b-tg\"\u003e\u003cstrong\u003eUTS3000-TG\u003c\/strong\u003e\u003c\/a\u003e option, a field-installable tracking generator covering \u003cstrong\u003e100 kHz – 3.6 GHz\u003c\/strong\u003e — the full analyzer range. Output is adjustable from -40 dBm to 0 dBm in 0.5 dB steps with ±3 dB flatness relative to 50 MHz. Once installed, the TG output appears on its own dedicated front-panel Type-N connector, and the UTS3036B becomes a scalar network analyzer for transmission measurements on filters, amplifiers, matching networks, and antennas. Many teams start with the UTS3036B for general spectrum work and add the TG later when a project demands scalar transmission measurements.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eHow does the UTS3036B compare to the UTS3000T+ Performance series?\u003c\/p\u003e\n\u003cp\u003eThe UTS3000B\/T family and the newer UTS3000T+ family share core architecture — the same 10.1-inch multi-touch UI, the same 40,001-point sweeps, -161 dBm DANL, and \u0026lt;-98 dBc\/Hz phase noise. The \u003cstrong\u003eUTS3000T+\u003c\/strong\u003e family steps up to typically -164 to -165 dBm DANL, adds features like a waterfall display, peak tables, and VSWR\/return-loss measurement modes, and bundles the tracking generator as standard across all SKUs. For production validation, RF service work, EMI pre-compliance, and IoT\/wireless module verification at the sub-3.6 GHz workload, the UTS3036B is well-matched at a lower price point. For new RF design work where the newer feature set and additional measurement margin matter, the UTS3000T+ family is the active upgrade path within UNI-T's spectrum analyzer lineup.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eWhat software options are available, and what do they add?\u003c\/p\u003e\n\u003cp\u003eThree software options expand the UTS3036B's measurement capabilities: \u003cstrong\u003e\u003ca href=\"\/products\/uts3000b-amk\"\u003eUTS3000-AMK\u003c\/a\u003e\u003c\/strong\u003e (Advanced Measurement Kit) adds channel power, ACP, OBW, time-domain power, CNR, TOI, and harmonic measurements with a spectrogram display. \u003cstrong\u003e\u003ca href=\"\/products\/uts3000b-ama\"\u003eUTS3000-AMA\u003c\/a\u003e\u003c\/strong\u003e adds AM\/FM analog demodulation analysis. \u003cstrong\u003e\u003ca href=\"\/products\/uts3000b-emi\"\u003eUTS3000-EMI\u003c\/a\u003e\u003c\/strong\u003e adds CISPR-aligned EMI pre-compliance with QP\/AVG\/PEAK detectors and limit-line support — it pairs with the optional \u003ca href=\"\/products\/uts-emi01-near-field-probe-kit\"\u003eUTS-EMI01 near-field probe kit\u003c\/a\u003e for PCB-level emission localization.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eIs the UTS3036B suitable for automated test (ATE)?\u003c\/p\u003e\n\u003cp\u003eYes. The UTS3036B accepts standard SCPI commands over USB-Device (USB-B 2.0) and LAN VXI-11 (RJ-45). It drops into pyvisa, LabVIEW, NI-MAX, or any framework that talks to standard test instruments — no proprietary driver layer required beyond a USB or LAN connection. The full SCPI command set is documented in the UTS3000B Programming Manual.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003c\/div\u003e","brand":"UNI-T","offers":[{"title":"Default Title","offer_id":46698376757532,"sku":"181200100005X","price":2159.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UTS3036B_Cables.jpg?v=1720807288"},{"product_id":"uts3021b","title":"UTS3021B 2.1GHz Performance-Series Spectrum Analyzer","description":"\u003ch1\u003eUNI-T UTS3021B 2.1GHz Performance-Series Spectrum Analyzer: 2.1 GHz Performance Analyzer (TG-Upgradeable)\u003c\/h1\u003e\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eUNI-T UTS3021B Performance-Series Spectrum Analyzer\u003c\/strong\u003e covers \u003cstrong\u003e9 kHz – 2.1 GHz\u003c\/strong\u003e with a 10.1-inch capacitive multi-touch display, a 1 Hz resolution-bandwidth floor, and up to 40,001 sweep points. It targets the sub-2.1 GHz bench measurement workload — communications module verification, IoT and wireless development, harmonic and spurious testing — with the option to add a tracking generator in the field when your work demands scalar transmission measurements.\u003c\/p\u003e\n\u003cp\u003eA typical displayed average noise level of \u003cstrong\u003e-161 dBm\/Hz\u003c\/strong\u003e (preamp on) and phase noise of \u003cstrong\u003e\u0026lt;-98 dBc\/Hz\u003c\/strong\u003e at a 10 kHz offset deliver the dynamic range needed for serious signal characterization in the sub-2.1 GHz band. Standard interfaces include HDMI 1.4 display output, USB-A 3.0 (Host), USB-B 2.0 (Device), and Gigabit LAN with full SCPI support — the UTS3021B drops into an automated test rack as easily as it sits on a development bench.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cdiv class=\"product-key-features\"\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e9 kHz – 2.1 GHz frequency coverage\u003c\/strong\u003e — sub-2.1 GHz for general RF dev, communications, harmonic surveys, and EMI pre-compliance work\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e-161 dBm\/Hz typical DANL\u003c\/strong\u003e (preamp on) — sensitive enough to resolve low-level signals, spurs, and harmonic energy near the noise floor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u0026lt;-98 dBc\/Hz phase noise @ 10 kHz offset\u003c\/strong\u003e (typical, 1 GHz carrier) — clean enough for close-in spectral measurements and modulated-signal analysis\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1 Hz – 3 MHz RBW\u003c\/strong\u003e in 1-3-10 steps — fine resolution control all the way down to a 1 Hz floor, with FFT mode for faster narrowband sweeps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e40,001 sweep points\u003c\/strong\u003e — deep trace detail (4× the count of UNI-T's entry tier) for catching signals that coarser analyzers miss\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e10.1-inch capacitive multi-touch display\u003c\/strong\u003e (1280 × 800) — pinch, drag, and tap to set markers, with full mouse\/keyboard support via USB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSix traces with five detector modes\u003c\/strong\u003e — Sample, Peak, Negative, Normal, Average; Clear\/Write, Average, Max Hold, Min Hold trace types\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eField-upgradeable tracking generator\u003c\/strong\u003e — add scalar network analysis later by ordering the \u003ca href=\"\/products\/uts3000b-tg\"\u003eUTS3000-TG\u003c\/a\u003e option (TG range matches analyzer frequency: 100 kHz – 2.1 GHz)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull SCPI remote control\u003c\/strong\u003e — over USB-Device (USB-B 2.0) and LAN VXI-11 (10\/100\/1000 Base) for automated test, production lines, and unattended data collection\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOption-extensible\u003c\/strong\u003e — add \u003ca href=\"\/products\/uts3000b-ama\"\u003eUTS3000-AMA\u003c\/a\u003e (analog demodulation), \u003ca href=\"\/products\/uts3000b-amk\"\u003eUTS3000-AMK\u003c\/a\u003e (advanced measurement kit), or \u003ca href=\"\/products\/uts3000b-emi\"\u003eUTS3000-EMI\u003c\/a\u003e (EMI pre-compliance) as your work scope grows\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt to last in working environments\u003c\/strong\u003e — forced-air cooling with a user-removable dust filter to keep the internals clean across years of bench use\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eUNI-T UTS3021B Details\u003c\/h2\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eFrequency Coverage (9 kHz – 2.1 GHz)\u003c\/h3\u003e\n\u003cp\u003eThe UTS3021B sweeps continuously from 9 kHz up to \u003cstrong\u003e2.1 GHz\u003c\/strong\u003e, with 1 Hz frequency resolution and marker counter accuracy on the same order. The 2.1 GHz ceiling covers the 2.4 GHz ISM band's lower edge (with appropriate care near the limit), all sub-GHz ISM bands (315\/433\/868\/915 MHz), common 1.8\/2.0 GHz cellular bands, and a comfortable harmonic margin for HF and VHF transmitter work. A 1 Hz frequency reference calibration accuracy with \u0026lt;1 ppm temperature stability keeps measurements steady across the calibration cycle.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-uts3021b-2-1ghz-performance-series-spectrum-analyzer-sweep\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTS3000B-Sweep.png\" alt=\"UNI-T UTS3021B Sweep Display\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eUNI-T UTS3021B 40,001-Point Sweep\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eSensitivity (DANL as low as -161 dBm\/Hz)\u003c\/h3\u003e\n\u003cp\u003eWeak-signal testing depends on how quiet the analyzer itself is. With the preamp on, the UTS3021B reaches a typical displayed average noise level of \u003cstrong\u003e-161 dBm\/Hz\u003c\/strong\u003e in the 200 MHz – 1.5 GHz band — low enough to resolve faint emissions, identify harmonic energy well below the carrier, and characterize signals near the noise floor. Five detector modes (Sample, Peak, Negative, Normal, Average) and four trace types give you the flexibility to tune what the trace shows for any measurement context. A switchable 20 dB preamp adds gain when you need it, and the input attenuator adjusts in 1 dB steps from 0 to 51 dB.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-uts3021b-2-1ghz-performance-series-spectrum-analyzer-sensitivity\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTS3000B-Sensitivity.png\" alt=\"UNI-T UTS3021B Sensitivity\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eUNI-T UTS3021B -161 dBm\/Hz DANL\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch3\u003ePhase Noise (\u0026lt;-98 dBc\/Hz at 10 kHz offset)\u003c\/h3\u003e\n\u003cp\u003eClean local-oscillator performance matters when you're working close to a strong carrier — modulated signal analysis, narrowband interference identification, or oscillator-quality measurement. With \u003cstrong\u003etypical phase noise of \u0026lt;-98 dBc\/Hz at a 10 kHz offset\u003c\/strong\u003e from a 1 GHz carrier (measured with a 1 kHz RBW and 10 Hz VBW), the UTS3021B resolves close-in spectral content without the phase noise pedestal washing it out. Typical performance at a 1 MHz offset is in the -112 to -116 dBc\/Hz range — well-suited for general modulated-signal and oscillator work.\u003c\/p\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003e1 Hz – 3 MHz Resolution Bandwidth\u003c\/h3\u003e\n\u003cp\u003eResolution bandwidth in 1-3-10 steps, from 1 Hz all the way to \u003cstrong\u003e3 MHz\u003c\/strong\u003e, gives you the right sweep speed \/ selectivity trade-off for any measurement. Drop the RBW to 1 Hz to separate signals closer together in frequency than most mid-tier analyzers can manage; widen it for fast high-level surveys. Bandwidth accuracy holds within 5% nominal, and switching between resolution settings introduces only ±0.2 dB relative amplitude uncertainty. The shape factor (-60 dB \/ -3 dB ratio) is \u0026lt;4.8:1 nominal — tight skirts that help you separate close-in signals of unequal amplitude. FFT sweep mode is also available for faster narrowband measurements.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-uts3021b-2-1ghz-performance-series-spectrum-analyzer-selectivity\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTS3000B-Selectivity.png\" alt=\"UNI-T UTS3021B Selectivity\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eUNI-T UTS3021B RBW Selectivity\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch3\u003e40,001 Sweep Points\u003c\/h3\u003e\n\u003cp\u003eMore points across a trace means finer frequency resolution per pixel and a much better chance of catching signals that fall between coarser bins. The UTS3021B provides up to \u003cstrong\u003e40,001 sweep points per trace\u003c\/strong\u003e — four times the count of UNI-T's entry-tier UTS1000B series, and high enough to clearly distinguish closely-spaced signals, identify intermittent emissions, and read marker frequencies with confidence. Combined with six independent traces, you can simultaneously display raw, max-hold, min-hold, and averaged versions of the same span.\u003c\/p\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003e10.1-inch Multi-Touch Interface\u003c\/h3\u003e\n\u003cp\u003eThe UTS3021B uses a 10.1-inch capacitive multi-touch display (1280 × 800 HD resolution) for direct interaction with traces, markers, and menus. Pinch, drag, and zoom directly on the trace; set markers by tapping where you want them; navigate menus the way you'd expect on a modern tablet. For lab environments where a USB mouse or keyboard is more practical, the UTS3021B accepts those through the USB Host port. The touch UI cuts measurement setup time noticeably on day-to-day bench work — especially when you're repeatedly adjusting span, RBW, and marker positions across many sweeps.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-uts3021b-2-1ghz-performance-series-spectrum-analyzer-touch\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTS3000B-Touch.png\" alt=\"UNI-T UTS3021B Touch Interface\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eUNI-T UTS3021B 10.1-inch Multi-Touch UI\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch3\u003eMarker Suite (4 Markers, 5 Functions)\u003c\/h3\u003e\n\u003cp\u003eFour markers with three modes (Normal, Delta, Fixed) cover the basic measurement vocabulary — reading absolute level, computing delta between two points, locking a marker to a frequency for sweep-to-sweep comparison. Five built-in marker functions go further: \u003cstrong\u003eMarker Noise\u003c\/strong\u003e reads noise density in dBm\/Hz at the marker, \u003cstrong\u003eBand Power\u003c\/strong\u003e integrates total power over a user-defined band, \u003cstrong\u003eBand Density\u003c\/strong\u003e reports power per Hz across that band, \u003cstrong\u003eN dB\u003c\/strong\u003e auto-finds the points N dB down from a peak (useful for measuring -3 dB or -6 dB bandwidths), and \u003cstrong\u003eCounter\u003c\/strong\u003e reads frequency to 1 Hz resolution.\u003c\/p\u003e\n\u003ch3\u003eConnectivity (HDMI, USB, LAN, 10 MHz Ref)\u003c\/h3\u003e\n\u003cp\u003eA full set of standard rear-panel interfaces makes the UTS3021B easy to fit into any workflow:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRF Input:\u003c\/strong\u003e Type-N female, 50 Ω\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHDMI 1.4 display output\u003c\/strong\u003e — mirror the trace to an external monitor for shared review or training\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB-A 3.0 Host\u003c\/strong\u003e + \u003cstrong\u003eUSB-B 2.0 Device\u003c\/strong\u003e — thumb drive, mouse\/keyboard, and SCPI over USB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLAN VXI-11 (10\/100\/1000 Base, RJ-45)\u003c\/strong\u003e — networked remote control\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e10 MHz reference in\/out\u003c\/strong\u003e (BNC) — lock to an external timebase or share the internal reference\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExternal trigger input\u003c\/strong\u003e (TTL, BNC, rising\/falling edge)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSCPI Remote Control for Automated Test\u003c\/h3\u003e\n\u003cp\u003eThe UTS3021B responds to industry-standard SCPI commands over both USB-Device (USB-B 2.0) and LAN VXI-11 (RJ-45). That means it drops cleanly into pyvisa, LabVIEW, NI-MAX, or any other test framework that talks to standard instruments — no proprietary protocol layer to learn, no special drivers beyond a USB or LAN connection. Whether you're building a production test rig, automating a parametric sweep across DUTs, or running unattended overnight data collection, the interface scales the same way the rest of the bench does. The full SCPI command set is documented in the UTS3000B Programming Manual.\u003c\/p\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eTracking Generator Upgrade Path (UTS3000-TG Option)\u003c\/h3\u003e\n\u003cp\u003eThe UTS3021B chassis is provisioned for tracking generator hardware that you can add in the field by ordering the \u003ca href=\"\/products\/uts3000b-tg\"\u003e\u003cstrong\u003eUTS3000-TG\u003c\/strong\u003e\u003c\/a\u003e option. The TG range matches the analyzer's frequency: \u003cstrong\u003e100 kHz – 2.1 GHz\u003c\/strong\u003e. Output power is adjustable from -40 dBm to 0 dBm in 0.5 dB steps with ±3 dB flatness relative to 50 MHz. Once installed, the TG output appears on its own dedicated front-panel Type-N female 50 Ω connector.\u003c\/p\u003e\n\u003cp\u003eWhy this matters: a tracking generator turns the UTS3021B into a scalar network analyzer for transmission measurements. Sweep filters to read insertion loss and frequency response, characterize amplifier gain across a band, measure matching-network response, and check antenna return loss (with a directional coupler) — all without a separate signal generator. Many teams start with the UTS3021B for general spectrum work and add the TG option later when a project demands scalar transmission measurements.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-uts3021b-2-1ghz-performance-series-spectrum-analyzer-tg-upgrade\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTS3000B-Sweep-2.png\" alt=\"UNI-T UTS3021B Tracking Generator Output (with UTS3000-TG option)\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eUNI-T UTS3021B TG Output with UTS3000-TG Option\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eSoftware Options for Specialized Measurements\u003c\/h3\u003e\n\u003cp\u003eThe UTS3021B starts as a capable general-purpose spectrum analyzer and grows into specialized roles through software options — the instrument hardware is the same; the options unlock measurement modes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/products\/uts3000b-amk\"\u003eUTS3000-AMK\u003c\/a\u003e (Advanced Measurement Kit)\u003c\/strong\u003e — adds channel power, adjacent channel power (ACP), occupied bandwidth (OBW), time-domain power, carrier-to-noise ratio (CNR), third-order intercept (TOI), and harmonic measurements (up to the 10th harmonic), plus a spectrogram display for time-history visualization\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/products\/uts3000b-ama\"\u003eUTS3000-AMA\u003c\/a\u003e (Analog Demodulation)\u003c\/strong\u003e — AM and FM demodulation analysis with modulation rate, depth, and frequency offset measurements (20 Hz – 100 kHz modulation rate range)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/products\/uts3000b-emi\"\u003eUTS3000-EMI\u003c\/a\u003e (EMI Pre-Compliance)\u003c\/strong\u003e — CISPR-aligned QP\/AVG\/PEAK detectors, EMI band sweep, and limit-line analysis. Pairs with the optional \u003ca href=\"\/products\/uts-emi01-near-field-probe-kit\"\u003eUTS-EMI01 near-field probe kit\u003c\/a\u003e (3 mm to 10 cm probes, 30 MHz – 3 GHz) for board-level emission hunting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-uts3021b-2-1ghz-performance-series-spectrum-analyzer-options-emi\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTS3000B-EMI.png\" alt=\"UNI-T UTS3021B EMI Pre-Compliance with UTS-EMI01 Probes\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eUNI-T UTS3021B EMI Pre-Compliance Mode\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eBuilt for Working Lab Environments\u003c\/h3\u003e\n\u003cp\u003eA spectrum analyzer that lives next to soldering stations, drilling, and general bench work will breathe in dust over time. The UTS3021B addresses this with forced-air cooling and a \u003cstrong\u003euser-removable dust filter\u003c\/strong\u003e — pop it out, vacuum or blow it off, and slide it back. No tools, no service-center trip, no fan failures from dust accumulation. Operating range is 0 °C to +40 °C, storage to -20 °C \/ +70 °C, with full ±1 ppm timebase stability across the operational temperature range. The full IEC 61326 EMC compliance and EN 61010 safety qualification (with cETLus mark) round out a unit built to hold up across years of bench use.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-uts3021b-2-1ghz-performance-series-spectrum-analyzer-dust\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTS3000B-Dust.png\" alt=\"UNI-T UTS3021B Removable Dust Filter\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eUNI-T UTS3021B User-Removable Dust Filter\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ca id=\"lb-uts3021b-2-1ghz-performance-series-spectrum-analyzer-sweep\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTS3000B-Sweep.png\" alt=\"UNI-T UTS3021B Sweep Display\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eUNI-T UTS3021B 40,001-Point Sweep\u003c\/span\u003e\n\u003c\/a\u003e\n\u003ca id=\"lb-uts3021b-2-1ghz-performance-series-spectrum-analyzer-sensitivity\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTS3000B-Sensitivity.png\" alt=\"UNI-T UTS3021B Sensitivity\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eUNI-T UTS3021B -161 dBm\/Hz DANL\u003c\/span\u003e\n\u003c\/a\u003e\n\u003ca id=\"lb-uts3021b-2-1ghz-performance-series-spectrum-analyzer-selectivity\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTS3000B-Selectivity.png\" alt=\"UNI-T UTS3021B Selectivity\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eUNI-T UTS3021B RBW Selectivity\u003c\/span\u003e\n\u003c\/a\u003e\n\u003ca id=\"lb-uts3021b-2-1ghz-performance-series-spectrum-analyzer-touch\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTS3000B-Touch.png\" alt=\"UNI-T UTS3021B Touch Interface\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eUNI-T UTS3021B 10.1-inch Multi-Touch UI\u003c\/span\u003e\n\u003c\/a\u003e\n\u003ca id=\"lb-uts3021b-2-1ghz-performance-series-spectrum-analyzer-tg-upgrade\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTS3000B-Sweep-2.png\" alt=\"UNI-T UTS3021B Tracking Generator Output (with UTS3000-TG option)\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eUNI-T UTS3021B TG Output with UTS3000-TG Option\u003c\/span\u003e\n\u003c\/a\u003e\n\u003ca id=\"lb-uts3021b-2-1ghz-performance-series-spectrum-analyzer-options-emi\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTS3000B-EMI.png\" alt=\"UNI-T UTS3021B EMI Pre-Compliance with UTS-EMI01 Probes\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eUNI-T UTS3021B EMI Pre-Compliance Mode\u003c\/span\u003e\n\u003c\/a\u003e\n\u003ca id=\"lb-uts3021b-2-1ghz-performance-series-spectrum-analyzer-dust\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTS3000B-Dust.png\" alt=\"UNI-T UTS3021B Removable Dust Filter\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eUNI-T UTS3021B User-Removable Dust Filter\u003c\/span\u003e\n\u003c\/a\u003e\n\u003ch2\u003eApplications\u003c\/h2\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch3\u003eRF Design and Validation (sub-2.1 GHz)\u003c\/h3\u003e\n\u003cp\u003eCharacterize transmit spectrum, harmonics, spurious emissions, and channel power for sub-2.1 GHz designs. The UTS3021B covers all the major sub-GHz ISM bands (315\/433\/868\/915 MHz, LoRa sub-GHz), common 1.8\/2.0 GHz cellular bands, and broad harmonic margin for HF\/VHF transmitter work. With the AMK option, ACP and OBW measurements add channel-respect verification for designs targeting tight regulatory band edges.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch3\u003eCommunications and IoT Module Verification\u003c\/h3\u003e\n\u003cp\u003eProduction engineering and incoming-inspection workflows for wireless modules — verify TX power, occupied bandwidth, harmonic emissions, and spurious responses against datasheet specs and regulatory limits. SCPI automation lets you build a repeatable production test station around the analyzer, with pass\/fail logging against limit lines.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch3\u003eEMI Pre-Compliance Investigation\u003c\/h3\u003e\n\u003cp\u003eCatch radiated and conducted emissions issues before sending boards to a full CISPR\/FCC compliance lab. With the \u003ca href=\"\/products\/uts3000b-emi\"\u003eUTS3000-EMI\u003c\/a\u003e option plus the \u003ca href=\"\/products\/uts-emi01-near-field-probe-kit\"\u003eUTS-EMI01 near-field probe kit\u003c\/a\u003e (3 mm to 10 cm probes, 30 MHz – 3 GHz), the UTS3021B becomes a board-level emission hunter — sweep with QP\/AVG\/PEAK detectors, overlay limit lines, and localize hot spots on the PCB before they cost you a failed compliance test.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch3\u003eFilter and Component Characterization\u003c\/h3\u003e\n\u003cp\u003eWith the \u003ca href=\"\/products\/uts3000b-tg\"\u003eUTS3000-TG\u003c\/a\u003e option installed, the UTS3021B adds scalar transmission measurements: insertion loss, gain, frequency response, and stopband rejection on filters, amplifiers, attenuators, and antennas. Sweep across \u003cstrong\u003e100 kHz – 2.1 GHz\u003c\/strong\u003e and read the response directly on the analyzer trace. Add a directional coupler for return-loss measurements on antennas and matching networks.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch3\u003eProduction Test and Quality Control\u003c\/h3\u003e\n\u003cp\u003eSCPI automation over USB or LAN (VXI-11) lets the UTS3021B drop into pyvisa, LabVIEW, or NI-TestStand workflows for repeatable production verification. Run end-of-line tests on transmitter modules, RF amplifier gain stages, oscillator output, or filter assemblies; log pass\/fail results against limit lines; and feed data into MES or QC databases. Six independent traces, max-hold detection, and 40,001-point sweeps give production-engineering teams the trace depth needed to catch intermittent issues that single-sweep tests miss.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch3\u003eRF Service, Repair, and Maintenance\u003c\/h3\u003e\n\u003cp\u003eA capable bench instrument for two-way radio shops, broadcast engineering, antenna service work, and field calibration support. Marker counter functions, harmonic measurements (with AMK), and the touch interface make routine service work quick. The 2.1 GHz ceiling covers commercial broadcast, public-safety and amateur radio, broadcast TV harmonics, and (on 3.6 GHz+ units) sub-6 GHz wireless infrastructure.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eAccessories and Family Options\u003c\/h2\u003e\n\u003ch3\u003eIncluded with Every Unit\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUTS3000B-series Spectrum Analyzer (UTS3021B)\u003c\/li\u003e\n\u003cli\u003ePower cord\u003c\/li\u003e\n\u003cli\u003eUSB cable (UT-D04)\u003c\/li\u003e\n\u003cli\u003eEnglish download guide\u003c\/li\u003e\n\u003cli\u003eMulti-language safety manual\u003c\/li\u003e\n\u003cli\u003eFactory calibration certificate\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eRecommended Software Options\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/uts3000b-tg\"\u003eUTS3000-TG\u003c\/a\u003e — Tracking Generator field-upgrade (100 kHz – 2.1 GHz) for scalar transmission measurements\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/uts3000b-amk\"\u003eUTS3000-AMK\u003c\/a\u003e — Advanced Measurement Kit (channel power, ACP, OBW, CNR, TOI, harmonics, spectrogram)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/uts3000b-ama\"\u003eUTS3000-AMA\u003c\/a\u003e — Analog Demodulation Analysis (AM and FM)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/uts3000b-emi\"\u003eUTS3000-EMI\u003c\/a\u003e — EMI Pre-Compliance (CISPR-aligned QP\/AVG\/PEAK detectors, limit-line analysis)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eRecommended Accessories\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/uts-emi01-near-field-probe-kit\"\u003eUTS-EMI01 Near-Field Probe Kit\u003c\/a\u003e — Four probes (30 MHz – 3 GHz, 3 mm to 10 cm resolution) for PCB-level emission hunting with the UTS3000-EMI option\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/ut-ck01-utility-kit\"\u003eUT-CK01 Utility Kit\u003c\/a\u003e — SMA\/N adapters, cables, and antennas for general RF setup\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/ut-w01-6ghz-n-n-rf-cable\"\u003eUT-W01-6GHz Cable\u003c\/a\u003e — N-to-N RF cable, 0.7 m, DC – 6 GHz\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/ut-w02-6ghz-n-sma-rf-cable\"\u003eUT-W02-6GHz Cable\u003c\/a\u003e — N-to-SMA RF cable, 0.7 m, DC – 6 GHz\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFamily Members\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUTS3021B\u003c\/strong\u003e — 2.1 GHz, TG-upgradeable via UTS3000-TG option \u003cem\u003e(this product)\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/uts3036b-3-6ghz-performance-series-spectrum-analyzer\"\u003eUTS3036B\u003c\/a\u003e — 3.6 GHz, TG-upgradeable via UTS3000-TG option\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/uts3084b-8-4ghz-performance-series-spectrum-analyzer\"\u003eUTS3084B\u003c\/a\u003e — 8.4 GHz, no TG\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/uts3084t-8-4ghz-performance-series-spectrum-analyzer-with-tracking-generator\"\u003eUTS3084T\u003c\/a\u003e — 8.4 GHz with integrated tracking generator\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eWhat's the DANL of the UTS3021B, and what does that mean for my measurements?\u003c\/p\u003e\n\u003cp\u003eThe UTS3021B reaches a typical displayed average noise level of \u003cstrong\u003e-161 dBm\/Hz\u003c\/strong\u003e with the preamp on in the 200 MHz – 1.5 GHz band. Practically: signals down around -120 dBm are visible above the noise floor with reasonable RBW settings (e.g., 1 kHz). For ultimate weak-signal work, narrow the RBW (each 10× reduction drops the noise floor by 10 dB) and enable averaging across multiple sweeps.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eCan I add a tracking generator to the UTS3021B later?\u003c\/p\u003e\n\u003cp\u003eYes. The UTS3021B chassis is provisioned for the \u003ca href=\"\/products\/uts3000b-tg\"\u003e\u003cstrong\u003eUTS3000-TG\u003c\/strong\u003e\u003c\/a\u003e option, a field-installable tracking generator covering \u003cstrong\u003e100 kHz – 2.1 GHz\u003c\/strong\u003e — the full analyzer range. Output is adjustable from -40 dBm to 0 dBm in 0.5 dB steps with ±3 dB flatness relative to 50 MHz. Once installed, the TG output appears on its own dedicated front-panel Type-N connector, and the UTS3021B becomes a scalar network analyzer for transmission measurements on filters, amplifiers, matching networks, and antennas. Many teams start with the UTS3021B for general spectrum work and add the TG later when a project demands scalar transmission measurements.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eHow does the UTS3021B compare to the UTS3000T+ Performance series?\u003c\/p\u003e\n\u003cp\u003eThe UTS3000B\/T family and the newer UTS3000T+ family share core architecture — the same 10.1-inch multi-touch UI, the same 40,001-point sweeps, -161 dBm DANL, and \u0026lt;-98 dBc\/Hz phase noise. The \u003cstrong\u003eUTS3000T+\u003c\/strong\u003e family steps up to typically -164 to -165 dBm DANL, adds features like a waterfall display, peak tables, and VSWR\/return-loss measurement modes, and bundles the tracking generator as standard across all SKUs. For production validation, RF service work, EMI pre-compliance, and IoT\/wireless module verification at the sub-2.1 GHz workload, the UTS3021B is well-matched at a lower price point. For new RF design work where the newer feature set and additional measurement margin matter, the UTS3000T+ family is the active upgrade path within UNI-T's spectrum analyzer lineup.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eWhat software options are available, and what do they add?\u003c\/p\u003e\n\u003cp\u003eThree software options expand the UTS3021B's measurement capabilities: \u003cstrong\u003e\u003ca href=\"\/products\/uts3000b-amk\"\u003eUTS3000-AMK\u003c\/a\u003e\u003c\/strong\u003e (Advanced Measurement Kit) adds channel power, ACP, OBW, time-domain power, CNR, TOI, and harmonic measurements with a spectrogram display. \u003cstrong\u003e\u003ca href=\"\/products\/uts3000b-ama\"\u003eUTS3000-AMA\u003c\/a\u003e\u003c\/strong\u003e adds AM\/FM analog demodulation analysis. \u003cstrong\u003e\u003ca href=\"\/products\/uts3000b-emi\"\u003eUTS3000-EMI\u003c\/a\u003e\u003c\/strong\u003e adds CISPR-aligned EMI pre-compliance with QP\/AVG\/PEAK detectors and limit-line support — it pairs with the optional \u003ca href=\"\/products\/uts-emi01-near-field-probe-kit\"\u003eUTS-EMI01 near-field probe kit\u003c\/a\u003e for PCB-level emission localization.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eIs the UTS3021B suitable for automated test (ATE)?\u003c\/p\u003e\n\u003cp\u003eYes. The UTS3021B accepts standard SCPI commands over USB-Device (USB-B 2.0) and LAN VXI-11 (RJ-45). It drops into pyvisa, LabVIEW, NI-MAX, or any framework that talks to standard test instruments — no proprietary driver layer required beyond a USB or LAN connection. The full SCPI command set is documented in the UTS3000B Programming Manual.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003c\/div\u003e","brand":"UNI-T","offers":[{"title":"Default Title","offer_id":46698389766428,"sku":"181200100004X","price":1599.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UTS3021B_Cables.jpg?v=1720807297"},{"product_id":"uts1032t","title":"UTS1032T 3.2 GHz Spectrum Analyzer with Tracking Generator","description":"\u003ch1\u003eUNI-T UTS1032T Advanced-Series 3.2GHz Spectrum Analyzer with Tracking Generator: Capable Entry-Level RF Analysis\u003c\/h1\u003e\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eUNI-T UTS1032T Advanced-Series Spectrum Analyzer\u003c\/strong\u003e brings full-featured RF analysis into reach for educators, hobbyists, and engineers who need a capable instrument without the price tag of a high-end performance analyzer. Covering \u003cstrong\u003e9 kHz – 3.2 GHz\u003c\/strong\u003e with an integrated tracking generator, the UTS1032T pairs a 10.1-inch capacitive multi-touch display with a 1 Hz resolution bandwidth floor and up to 10,001 sweep points — the kind of detail that lets you see what you actually need to see, whether you're chasing a stray spur or building familiarity with RF.\u003c\/p\u003e\n\u003cp\u003eA typical displayed average noise level of \u003cstrong\u003e-161 dBm\/Hz\u003c\/strong\u003e (preamp on) and phase noise of \u003cstrong\u003e\u0026lt;-98 dBc\/Hz\u003c\/strong\u003e at a 10 kHz offset deliver the dynamic range needed for everyday signal characterization in the sub-3.2GHz band. Standard interfaces include HDMI 1.4 display output, USB-A 3.0 (Host), USB-B 2.0 (Device), and Gigabit LAN with full SCPI support — the UTS1032T fits as easily on a benchtop next to a soldering iron as it does in a remotely-driven automated test rack.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cdiv class=\"product-key-features\"\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e9 kHz – 3.2 GHz frequency coverage\u003c\/strong\u003e — spans the bands used in Wi-Fi, BLE, ZigBee, LoRa, sub-GHz ISM, and general wireless development\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e-161 dBm\/Hz typical DANL\u003c\/strong\u003e — with preamp on, sensitive enough to resolve low-level signals and harmonics\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u0026lt;-98 dBc\/Hz phase noise @ 10 kHz offset\u003c\/strong\u003e — clean enough to evaluate nearby carriers and modulated signals\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1 Hz – 1 MHz RBW\u003c\/strong\u003e in 1-3-10 steps — gives you fine selectivity control all the way down to a 1 Hz resolution floor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e10,001 sweep points\u003c\/strong\u003e — deep trace detail for finding the signals that lower-resolution analyzers miss\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e10.1-inch capacitive multi-touch display\u003c\/strong\u003e (1280 × 800) — same modern UI style as the higher-end performance series, with gesture-based zoom and pan\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated tracking generator\u003c\/strong\u003e (100 kHz – 3.2 GHz) — built-in scalar network analysis for filters, amplifiers, and antennas\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull remote control\u003c\/strong\u003e — SCPI over USB-Device and LAN (VXI-11) for automated test setups and remote bench access\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOption-extensible\u003c\/strong\u003e — add UTS1000-AMA (analog demodulation), UTS1000-AMK (advanced measurement kit), or UTS1000-EMI (EMI pre-compliance) as your needs grow\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt to last in working environments\u003c\/strong\u003e — forced-air cooling with a user-removable dust filter to keep the internals clean\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eUNI-T UTS1032T Details\u003c\/h2\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eFrequency Coverage (9 kHz – 3.2 GHz)\u003c\/h3\u003e\n\u003cp\u003eThe UTS1032T sweeps continuously from 9 kHz up to 3.2 GHz, with a 1 Hz frequency resolution and marker counter accuracy on the same order. Coverage spans well into the 2.4 GHz ISM band, comfortably reaching the Wi-Fi 2.4 GHz spectrum, BLE, ZigBee, and other common short-range wireless. The 3.2 GHz ceiling covers most consumer and IoT radio development without stepping into the cost class of a microwave analyzer. A 1 Hz frequency reference calibration accuracy with \u0026lt;1 ppm temperature stability keeps the measurement steady across the calibration cycle.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-uts1032t-3-2ghz-advanced-series-spectrum-analyzer-with-tracking-generator-selectivity\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTS1000B-Selectivity.png\" alt=\"UNI-T UTS1032T Selectivity\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eUNI-T UTS1032T Selectivity\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch3\u003eSensitivity (DANL as low as -161 dBm\/Hz)\u003c\/h3\u003e\n\u003cp\u003eWeak-signal testing depends on how quiet the analyzer itself is. With the preamp on, the UTS1032T reaches a typical displayed average noise level of \u003cstrong\u003e-161 dBm\/Hz\u003c\/strong\u003e in the 200 MHz – 1.5 GHz band — low enough to resolve faint emissions, identify harmonic energy well below the carrier, and characterize signals near the noise floor. Five detector modes (Sample, Peak, Negative, Normal, Average) and four trace types (Clear\/Write, Average, Max Hold, Min Hold) give you the flexibility to optimize what the trace shows for any measurement context.\u003c\/p\u003e\n\u003ch3\u003ePhase Noise (\u0026lt;-98 dBc\/Hz at 10 kHz offset)\u003c\/h3\u003e\n\u003cp\u003eClean local oscillator performance matters when you're looking at signals close to a strong carrier — modulated signals, narrowband interference, or oscillator quality measurements. With \u003cstrong\u003etypical phase noise of \u0026lt;-98 dBc\/Hz at a 10 kHz offset\u003c\/strong\u003e from a 1 GHz carrier (with a 1 kHz RBW and 10 Hz VBW), the UTS1032T resolves close-in spectral content without the phase noise pedestal washing it out.\u003c\/p\u003e\n\u003ch3\u003e1 Hz – 1 MHz Resolution Bandwidth\u003c\/h3\u003e\n\u003cp\u003eResolution bandwidth in 1-3-10 steps, from 1 Hz all the way to 1 MHz, gives you the right sweep speed\/selectivity tradeoff for any measurement. Drop the RBW to 1 Hz to separate signals closer together in frequency than most entry-level analyzers can manage; widen it for fast high-level surveys. Bandwidth accuracy holds to within 5% nominal, and switching between resolution settings introduces only ±0.2 dB relative amplitude uncertainty. The UTS1032T also offers FFT sweep mode (1 Hz – 30 kHz RBW range) when you need faster measurement times in narrowband settings.\u003c\/p\u003e\n\u003ch3\u003e10,001 Sweep Points\u003c\/h3\u003e\n\u003cp\u003eMore points across a trace means finer frequency resolution per pixel and a much better chance of catching signals that fall between coarser bins. The UTS1032T provides up to \u003cstrong\u003e10,001 sweep points per trace\u003c\/strong\u003e — enough resolution to clearly distinguish closely-spaced signals, identify intermittent emissions, and read marker frequencies with confidence. Combined with four independent traces, you can simultaneously display raw, max-hold, min-hold, and averaged versions of the same span.\u003c\/p\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003e10.1-inch Multi-Touch Interface\u003c\/h3\u003e\n\u003cp\u003eThe UTS1032T uses the same 10.1-inch capacitive multi-touch display (1280 × 800 HD resolution) found on UNI-T's higher-end performance series — a feature you don't usually find at this price tier. Pinch, drag, and zoom directly on the trace, set markers by tapping where you want them, and navigate menus the way you'd expect on a modern tablet. For lab environments where a USB mouse or keyboard is more practical, the UTS1032T accepts those through the USB Host port.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-uts1032t-3-2ghz-advanced-series-spectrum-analyzer-with-tracking-generator-touch\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTS1000B-Touch.png\" alt=\"UNI-T UTS1032T Touch Interface\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eUNI-T UTS1032T Touch Interface\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch3\u003eMarker Suite (4 Markers with 5 Functions)\u003c\/h3\u003e\n\u003cp\u003eFour markers with three modes (Normal, Delta, Fixed) cover the basic measurement vocabulary — reading absolute level, computing delta between two points, locking a marker to a frequency for sweep-to-sweep comparison. Five built-in marker functions go further: \u003cstrong\u003eMarker Noise\u003c\/strong\u003e reads noise density in dBm\/Hz at the marker, \u003cstrong\u003eBand Power\u003c\/strong\u003e integrates total power over a user-defined band, \u003cstrong\u003eBand Density\u003c\/strong\u003e reports power per Hz across that band, \u003cstrong\u003eN dB\u003c\/strong\u003e auto-finds the points N dB down from a peak (useful for measuring -3 dB or -6 dB bandwidths), and \u003cstrong\u003eCounter\u003c\/strong\u003e reads frequency to 1 Hz resolution.\u003c\/p\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eConnectivity (HDMI, USB, LAN)\u003c\/h3\u003e\n\u003cp\u003eA full set of standard rear-panel interfaces makes the UTS1032T easy to fit into any workflow:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRF Input:\u003c\/strong\u003e Type-N female, 50 Ω — the rugged industry-standard RF connector\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHDMI 1.4 display output\u003c\/strong\u003e — mirror the trace to an external monitor or projector for class demos or shared review\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB-A 3.0 Host\u003c\/strong\u003e — thumb drive for screenshots and data export, plus mouse\/keyboard if you prefer them\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB-B 2.0 Device\u003c\/strong\u003e — SCPI communication with a PC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLAN VXI-11 (10\/100\/1000 Base, RJ-45)\u003c\/strong\u003e — networked remote control\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e10 MHz reference in\/out\u003c\/strong\u003e (BNC) — lock to an external timebase or share the internal reference with other instruments\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExternal trigger input\u003c\/strong\u003e (TTL, BNC, rising\/falling edge)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-uts1032t-3-2ghz-advanced-series-spectrum-analyzer-with-tracking-generator-detector\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTS1000B-Detector.png\" alt=\"UNI-T UTS1032T Detector Modes\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eUNI-T UTS1032T Detector Modes\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch3\u003eSCPI Remote Control for Automated Test\u003c\/h3\u003e\n\u003cp\u003eThe UTS1032T responds to industry-standard SCPI commands over both USB-Device (USB-B 2.0) and LAN VXI-11 (RJ-45). That means it drops cleanly into pyvisa, LabVIEW, NI-MAX, or any other test framework that talks to standard instruments — no proprietary protocol layer to learn, no special drivers beyond a USB or LAN connection. Whether you're building a production test rig, automating a parametric sweep, or running unattended overnight data collection, the interface scales the same way the rest of the bench does.\u003c\/p\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eIntegrated Tracking Generator (100 kHz – 3.2 GHz)\u003c\/h3\u003e\n\u003cp\u003eThe UTS1032T includes a built-in tracking generator that produces a synchronized swept output matched to the analyzer's receive frequency — effectively turning the instrument into a scalar network analyzer for transmission measurements. Sweep filters, amplifiers, and matching networks directly, with output power adjustable from -40 dBm to 0 dBm in 0.5 dB steps and ±3 dB (relative to 50 MHz) flatness relative to 50 MHz. The TG output uses a separate front-panel Type-N female 50 Ω connector, so you can keep your measurement setup wired and just route the source where you need it.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-uts1032t-3-2ghz-advanced-series-spectrum-analyzer-with-tracking-generator-tg-scan\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTS1000B-Scan.png\" alt=\"UNI-T UTS1032T Scan with Tracking Generator\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eUNI-T UTS1032T Scan with Tracking Generator\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eSoftware Options for Specialized Measurements\u003c\/h3\u003e\n\u003cp\u003eThe UTS1032T starts as a capable general-purpose spectrum analyzer and grows into specialized roles through software options — the instrument hardware is the same; the options unlock measurement modes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUTS1000-AMK (Advanced Measurement Kit)\u003c\/strong\u003e — adds channel power, adjacent channel power (ACP), occupied bandwidth (OBW), time-domain power, carrier-to-noise ratio (CNR), third-order intercept (TOI), and harmonic measurements (up to the 10th harmonic), plus a spectrogram display for time-history visualization\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUTS1000-AMA (Analog Demodulation)\u003c\/strong\u003e — AM and FM demodulation analysis with modulation rate, depth, and frequency offset measurements (20 Hz – 100 kHz modulation rate range)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUTS1000-VSA (Digital Demodulation)\u003c\/strong\u003e — ASK, FSK (2\/4\/8\/16-level), MSK\/GMSK, PSK (BPSK, QPSK, OQPSK, 8PSK), DPSK, and QAM (16\/32\/64\/128\/256) demodulation analysis with constellation, eye diagram, and EVM measurements\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUTS1000-EMI (EMI Pre-Compliance)\u003c\/strong\u003e — CISPR-aligned QP\/AVG\/PEAK detectors, EMI band sweep, and limit-line analysis. Pairs with the optional UTS-EMI01 near-field probe kit (3 mm to 10 cm probes) for board-level emission hunting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-uts1032t-3-2ghz-advanced-series-spectrum-analyzer-with-tracking-generator-options-emi\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTS1000B-EMI.png\" alt=\"UNI-T UTS1032T EMI Pre-Compliance with UTS-EMI01 Probes\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eUNI-T UTS1032T EMI Pre-Compliance with UTS-EMI01 Probes\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch3\u003eBuilt for Working Lab Environments\u003c\/h3\u003e\n\u003cp\u003eA spectrum analyzer that lives next to soldering stations, drilling, and general bench work will breathe in dust over time. The UTS1032T addresses this with forced-air cooling and a \u003cstrong\u003euser-removable dust filter\u003c\/strong\u003e — pop it out, vacuum or blow it off, and slide it back. No tools, no service-center trip, no fan failures from dust accumulation. Operating range is 0 °C to +40 °C, storage to -20 °C \/ +70 °C, with full ±1 ppm timebase stability across the operational temperature range.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ca id=\"lb-uts1032t-3-2ghz-advanced-series-spectrum-analyzer-with-tracking-generator-selectivity\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTS1000B-Selectivity.png\" alt=\"UNI-T UTS1032T Selectivity\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eUNI-T UTS1032T Selectivity\u003c\/span\u003e\n\u003c\/a\u003e\n\u003ca id=\"lb-uts1032t-3-2ghz-advanced-series-spectrum-analyzer-with-tracking-generator-touch\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTS1000B-Touch.png\" alt=\"UNI-T UTS1032T Touch Interface\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eUNI-T UTS1032T Touch Interface\u003c\/span\u003e\n\u003c\/a\u003e\n\u003ca id=\"lb-uts1032t-3-2ghz-advanced-series-spectrum-analyzer-with-tracking-generator-detector\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTS1000B-Detector.png\" alt=\"UNI-T UTS1032T Detector Modes\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eUNI-T UTS1032T Detector Modes\u003c\/span\u003e\n\u003c\/a\u003e\n\u003ca id=\"lb-uts1032t-3-2ghz-advanced-series-spectrum-analyzer-with-tracking-generator-tg-scan\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTS1000B-Scan.png\" alt=\"UNI-T UTS1032T Scan with Tracking Generator\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eUNI-T UTS1032T Scan with Tracking Generator\u003c\/span\u003e\n\u003c\/a\u003e\n\u003ca id=\"lb-uts1032t-3-2ghz-advanced-series-spectrum-analyzer-with-tracking-generator-options-emi\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTS1000B-EMI.png\" alt=\"UNI-T UTS1032T EMI Pre-Compliance with UTS-EMI01 Probes\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eUNI-T UTS1032T EMI Pre-Compliance with UTS-EMI01 Probes\u003c\/span\u003e\n\u003c\/a\u003e\n\u003ch2\u003eApplications\u003c\/h2\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch3\u003eEducational and Training Labs\u003c\/h3\u003e\n\u003cp\u003eThe 10.1-inch multi-touch interface makes the UTS1032T unusually approachable for students learning RF for the first time. Cost-conscious purchasing for university and technical college labs gets a fully-featured spectrum analyzer with the same UI patterns students will encounter on more expensive instruments later. Curriculum fit: communications systems, radio engineering, electronics fundamentals, antenna theory, EMC introduction.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch3\u003eWireless Device Development (sub-3.2 GHz)\u003c\/h3\u003e\n\u003cp\u003eCover 2.4 GHz Wi-Fi, Bluetooth (Classic and Low Energy), ZigBee, Z-Wave, sub-GHz ISM radios (315\/433\/868\/915 MHz), and LoRa — the radio standards that dominate IoT and consumer wireless. Characterize transmit spectrum, harmonics, spurious emissions, and channel power (with the AMK option) during product development and pre-production testing.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch3\u003eEMI Pre-Compliance Investigation\u003c\/h3\u003e\n\u003cp\u003eCatch radiated and conducted emissions issues before sending boards to a full CISPR\/FCC compliance lab. With the UTS1000-EMI option plus the UTS-EMI01 near-field probe kit (3 mm to 10 cm probes, 30 MHz – 3 GHz), the UTS1032T becomes a board-level emission hunter — sweep with QP\/AVG\/PEAK detectors, overlay limit lines, and localize hot spots on the PCB before they cost you a failed compliance test.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch3\u003eRF Service, Repair, and Maintenance\u003c\/h3\u003e\n\u003cp\u003eA capable bench instrument for two-way radio shops, broadcast engineering, antenna service work, and field calibration support. Marker counter functions, harmonic measurements (with AMK), and the touch interface make routine service work quick — the same RF diagnostic toolkit a more expensive analyzer offers, in a more accessible package.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch3\u003eFilter and Component Characterization\u003c\/h3\u003e\n\u003cp\u003eThe integrated tracking generator opens up scalar transmission measurements: insertion loss, gain, frequency response, and stopband rejection on filters, amplifiers, attenuators, and antennas. Sweep across 100 kHz – 3.2 GHz and read the response directly on the analyzer trace — no separate signal generator needed.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eAccessories and Family Options\u003c\/h2\u003e\n\u003ch3\u003eIncluded with Every Unit\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUTS1000B-series Spectrum Analyzer (instrument)\u003c\/li\u003e\n\u003cli\u003ePower cord\u003c\/li\u003e\n\u003cli\u003eUSB cable (UT-D04)\u003c\/li\u003e\n\u003cli\u003eEnglish download guide\u003c\/li\u003e\n\u003cli\u003eMulti-language safety manual\u003c\/li\u003e\n\u003cli\u003eFactory calibration certificate\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eRecommended Software Options\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/uts1000b-amk\"\u003eUTS1000-AMK\u003c\/a\u003e — Advanced Measurement Kit (channel power, ACP, OBW, TOI, harmonics, spectrogram)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/uts1000b-ama\"\u003eUTS1000-AMA\u003c\/a\u003e — Analog Demodulation (AM and FM)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/uts1000b-emi\"\u003eUTS1000-EMI\u003c\/a\u003e — EMI Pre-Compliance Software\u003c\/li\u003e\n\u003cli\u003eUTS1000-VSA — Digital Demodulation (ASK, FSK, MSK, PSK, DPSK, QAM)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eRecommended Accessories\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUTS-EMI01 near-field probe kit — four probes (30 MHz – 3 GHz, 3 mm to 10 cm resolution) for PCB-level emission hunting with the UTS1000-EMI option\u003c\/li\u003e\n\u003cli\u003eUT-CK01 accessories kit — SMA\/N adapters, cables, and antennas (824–960 MHz, 1710–1990 MHz, 2400–2500 MHz) for general RF setup\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/bag-b3-carry-bag\"\u003eBAG-B3 Carry Bag\u003c\/a\u003e — protective transport case sized for the UTS1000 series\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFamily Members\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/uts1015b-1-5ghz-advanced-series-spectrum-analyzer\"\u003eUTS1015B\u003c\/a\u003e — 1.5 GHz, no tracking generator — lowest entry point\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/uts1015t-1-5ghz-advanced-series-spectrum-analyzer-with-tracking-generator\"\u003eUTS1015T\u003c\/a\u003e — 1.5 GHz with tracking generator\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/uts1032b-3-2ghz-advanced-series-spectrum-analyzer\"\u003eUTS1032B\u003c\/a\u003e — 3.2 GHz, no tracking generator\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUTS1032T\u003c\/strong\u003e — 3.2 GHz with tracking generator \u003cem\u003e(this product)\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eWhat's the DANL of the UTS1032T, and what does that mean for my measurements?\u003c\/p\u003e\n\u003cp\u003eThe UTS1032T reaches a typical displayed average noise level of \u003cstrong\u003e-161 dBm\/Hz\u003c\/strong\u003e with the preamp on in the 200 MHz – 1.5 GHz band, slightly higher (less sensitive) at the lowest and highest frequencies of its range. Practically: signals down around -120 dBm are visible above the noise floor with reasonable RBW settings (e.g., 1 kHz). For ultimate weak-signal work, narrow the RBW (each 10× reduction drops the noise floor by 10 dB) and enable averaging.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eWhat can I measure with the tracking generator?\u003c\/p\u003e\n\u003cp\u003eThe TG generates a swept output that follows the analyzer's receive frequency from 100 kHz – 3.2 GHz, with output power adjustable from -40 dBm to 0 dBm in 0.5 dB steps. You can sweep filters (insertion loss, frequency response, bandwidth), amplifiers (gain, frequency response), passive networks (return loss with a directional coupler), and antennas (basic return-loss sweeps with a directional coupler or bridge). The TG output uses a separate front-panel Type-N connector so it can stay cabled to your DUT input.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eHow does the UTS1032T compare to the higher-end UTS3000T+ series?\u003c\/p\u003e\n\u003cp\u003eThe UTS1000B series is the entry tier — same modern touch UI and the same standard SCPI\/LAN interfaces, with -161 dBm DANL and \u0026lt;-98 dBc\/Hz phase noise. The UTS3000T+ Performance series steps up to -164 to -165 dBm DANL, adds features like a waterfall display, peak table, VSWR\/return loss measurements, and reflection analysis, and ships with the tracking generator integrated as standard. For an educational lab, RF hobbyist work, IoT\/wireless development, or EMI pre-compliance investigation, the UTS1000B series is well-matched at a much lower price point. For professional RF design work where measurement margin matters, look at the UTS3015T+ or UTS3032T+.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eWhat software options are available, and what do they add?\u003c\/p\u003e\n\u003cp\u003eFour software options expand the UTS1032T's measurement capabilities: \u003cstrong\u003eUTS1000-AMK\u003c\/strong\u003e (Advanced Measurement Kit) adds channel power, ACP, OBW, time-domain power, CNR, TOI, and harmonic measurements with a spectrogram display. \u003cstrong\u003eUTS1000-AMA\u003c\/strong\u003e adds AM\/FM analog demodulation analysis. \u003cstrong\u003eUTS1000-VSA\u003c\/strong\u003e adds digital demodulation for ASK, FSK, MSK, PSK, DPSK, and QAM signals up to 256-QAM. \u003cstrong\u003eUTS1000-EMI\u003c\/strong\u003e adds CISPR-aligned EMI pre-compliance with QP\/AVG\/PEAK detectors and limit-line support — it pairs with the optional UTS-EMI01 near-field probe kit for PCB-level emission localization.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eIs the UTS1032T suitable for automated test (ATE)?\u003c\/p\u003e\n\u003cp\u003eYes. The UTS1032T accepts standard SCPI commands over USB-Device (USB-B 2.0) and LAN VXI-11 (RJ-45). It drops into pyvisa, LabVIEW, NI-MAX, or any framework that talks to standard test instruments — no proprietary driver layer required beyond a USB or LAN connection. The full SCPI command set is documented in the UTS1000B Programming Manual.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003c\/div\u003e","brand":"UNI-T","offers":[{"title":"Default Title","offer_id":46699225252124,"sku":"181200100014X","price":1938.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UTS1032T_Cables.jpg?v=1720807306"},{"product_id":"uts1032b","title":"UTS1032B 3.2GHz Advanced-Series Spectrum Analyzer","description":"\u003ch1\u003eUNI-T UTS1032B Advanced-Series 3.2GHz Spectrum Analyzer: Capable Entry-Level RF Analysis\u003c\/h1\u003e\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eUNI-T UTS1032B Advanced-Series Spectrum Analyzer\u003c\/strong\u003e brings full-featured RF analysis into reach for educators, hobbyists, and engineers who need a capable instrument without the price tag of a high-end performance analyzer. Covering \u003cstrong\u003e9 kHz – 3.2 GHz\u003c\/strong\u003e, the UTS1032B pairs a 10.1-inch capacitive multi-touch display with a 1 Hz resolution bandwidth floor and up to 10,001 sweep points — the kind of detail that lets you see what you actually need to see, whether you're chasing a stray spur or building familiarity with RF.\u003c\/p\u003e\n\u003cp\u003eA typical displayed average noise level of \u003cstrong\u003e-161 dBm\/Hz\u003c\/strong\u003e (preamp on) and phase noise of \u003cstrong\u003e\u0026lt;-98 dBc\/Hz\u003c\/strong\u003e at a 10 kHz offset deliver the dynamic range needed for everyday signal characterization in the sub-3.2GHz band. Standard interfaces include HDMI 1.4 display output, USB-A 3.0 (Host), USB-B 2.0 (Device), and Gigabit LAN with full SCPI support — the UTS1032B fits as easily on a benchtop next to a soldering iron as it does in a remotely-driven automated test rack.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cdiv class=\"product-key-features\"\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e9 kHz – 3.2 GHz frequency coverage\u003c\/strong\u003e — spans the bands used in Wi-Fi, BLE, ZigBee, LoRa, sub-GHz ISM, and general wireless development\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e-161 dBm\/Hz typical DANL\u003c\/strong\u003e — with preamp on, sensitive enough to resolve low-level signals and harmonics\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u0026lt;-98 dBc\/Hz phase noise @ 10 kHz offset\u003c\/strong\u003e — clean enough to evaluate nearby carriers and modulated signals\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1 Hz – 1 MHz RBW\u003c\/strong\u003e in 1-3-10 steps — gives you fine selectivity control all the way down to a 1 Hz resolution floor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e10,001 sweep points\u003c\/strong\u003e — deep trace detail for finding the signals that lower-resolution analyzers miss\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e10.1-inch capacitive multi-touch display\u003c\/strong\u003e (1280 × 800) — same modern UI style as the higher-end performance series, with gesture-based zoom and pan\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull remote control\u003c\/strong\u003e — SCPI over USB-Device and LAN (VXI-11) for automated test setups and remote bench access\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOption-extensible\u003c\/strong\u003e — add UTS1000-AMA (analog demodulation), UTS1000-AMK (advanced measurement kit), or UTS1000-EMI (EMI pre-compliance) as your needs grow\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt to last in working environments\u003c\/strong\u003e — forced-air cooling with a user-removable dust filter to keep the internals clean\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eUNI-T UTS1032B Details\u003c\/h2\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eFrequency Coverage (9 kHz – 3.2 GHz)\u003c\/h3\u003e\n\u003cp\u003eThe UTS1032B sweeps continuously from 9 kHz up to 3.2 GHz, with a 1 Hz frequency resolution and marker counter accuracy on the same order. Coverage spans well into the 2.4 GHz ISM band, comfortably reaching the Wi-Fi 2.4 GHz spectrum, BLE, ZigBee, and other common short-range wireless. The 3.2 GHz ceiling covers most consumer and IoT radio development without stepping into the cost class of a microwave analyzer. A 1 Hz frequency reference calibration accuracy with \u0026lt;1 ppm temperature stability keeps the measurement steady across the calibration cycle.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-uts1032b-3-2ghz-advanced-series-spectrum-analyzer-selectivity\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTS1000B-Selectivity.png\" alt=\"UNI-T UTS1032B Selectivity\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eUNI-T UTS1032B Selectivity\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch3\u003eSensitivity (DANL as low as -161 dBm\/Hz)\u003c\/h3\u003e\n\u003cp\u003eWeak-signal testing depends on how quiet the analyzer itself is. With the preamp on, the UTS1032B reaches a typical displayed average noise level of \u003cstrong\u003e-161 dBm\/Hz\u003c\/strong\u003e in the 200 MHz – 1.5 GHz band — low enough to resolve faint emissions, identify harmonic energy well below the carrier, and characterize signals near the noise floor. Five detector modes (Sample, Peak, Negative, Normal, Average) and four trace types (Clear\/Write, Average, Max Hold, Min Hold) give you the flexibility to optimize what the trace shows for any measurement context.\u003c\/p\u003e\n\u003ch3\u003ePhase Noise (\u0026lt;-98 dBc\/Hz at 10 kHz offset)\u003c\/h3\u003e\n\u003cp\u003eClean local oscillator performance matters when you're looking at signals close to a strong carrier — modulated signals, narrowband interference, or oscillator quality measurements. With \u003cstrong\u003etypical phase noise of \u0026lt;-98 dBc\/Hz at a 10 kHz offset\u003c\/strong\u003e from a 1 GHz carrier (with a 1 kHz RBW and 10 Hz VBW), the UTS1032B resolves close-in spectral content without the phase noise pedestal washing it out.\u003c\/p\u003e\n\u003ch3\u003e1 Hz – 1 MHz Resolution Bandwidth\u003c\/h3\u003e\n\u003cp\u003eResolution bandwidth in 1-3-10 steps, from 1 Hz all the way to 1 MHz, gives you the right sweep speed\/selectivity tradeoff for any measurement. Drop the RBW to 1 Hz to separate signals closer together in frequency than most entry-level analyzers can manage; widen it for fast high-level surveys. Bandwidth accuracy holds to within 5% nominal, and switching between resolution settings introduces only ±0.2 dB relative amplitude uncertainty. The UTS1032B also offers FFT sweep mode (1 Hz – 30 kHz RBW range) when you need faster measurement times in narrowband settings.\u003c\/p\u003e\n\u003ch3\u003e10,001 Sweep Points\u003c\/h3\u003e\n\u003cp\u003eMore points across a trace means finer frequency resolution per pixel and a much better chance of catching signals that fall between coarser bins. The UTS1032B provides up to \u003cstrong\u003e10,001 sweep points per trace\u003c\/strong\u003e — enough resolution to clearly distinguish closely-spaced signals, identify intermittent emissions, and read marker frequencies with confidence. Combined with four independent traces, you can simultaneously display raw, max-hold, min-hold, and averaged versions of the same span.\u003c\/p\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003e10.1-inch Multi-Touch Interface\u003c\/h3\u003e\n\u003cp\u003eThe UTS1032B uses the same 10.1-inch capacitive multi-touch display (1280 × 800 HD resolution) found on UNI-T's higher-end performance series — a feature you don't usually find at this price tier. Pinch, drag, and zoom directly on the trace, set markers by tapping where you want them, and navigate menus the way you'd expect on a modern tablet. For lab environments where a USB mouse or keyboard is more practical, the UTS1032B accepts those through the USB Host port.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-uts1032b-3-2ghz-advanced-series-spectrum-analyzer-touch\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTS1000B-Touch.png\" alt=\"UNI-T UTS1032B Touch Interface\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eUNI-T UTS1032B Touch Interface\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch3\u003eMarker Suite (4 Markers with 5 Functions)\u003c\/h3\u003e\n\u003cp\u003eFour markers with three modes (Normal, Delta, Fixed) cover the basic measurement vocabulary — reading absolute level, computing delta between two points, locking a marker to a frequency for sweep-to-sweep comparison. Five built-in marker functions go further: \u003cstrong\u003eMarker Noise\u003c\/strong\u003e reads noise density in dBm\/Hz at the marker, \u003cstrong\u003eBand Power\u003c\/strong\u003e integrates total power over a user-defined band, \u003cstrong\u003eBand Density\u003c\/strong\u003e reports power per Hz across that band, \u003cstrong\u003eN dB\u003c\/strong\u003e auto-finds the points N dB down from a peak (useful for measuring -3 dB or -6 dB bandwidths), and \u003cstrong\u003eCounter\u003c\/strong\u003e reads frequency to 1 Hz resolution.\u003c\/p\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eConnectivity (HDMI, USB, LAN)\u003c\/h3\u003e\n\u003cp\u003eA full set of standard rear-panel interfaces makes the UTS1032B easy to fit into any workflow:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRF Input:\u003c\/strong\u003e Type-N female, 50 Ω — the rugged industry-standard RF connector\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHDMI 1.4 display output\u003c\/strong\u003e — mirror the trace to an external monitor or projector for class demos or shared review\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB-A 3.0 Host\u003c\/strong\u003e — thumb drive for screenshots and data export, plus mouse\/keyboard if you prefer them\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB-B 2.0 Device\u003c\/strong\u003e — SCPI communication with a PC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLAN VXI-11 (10\/100\/1000 Base, RJ-45)\u003c\/strong\u003e — networked remote control\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e10 MHz reference in\/out\u003c\/strong\u003e (BNC) — lock to an external timebase or share the internal reference with other instruments\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExternal trigger input\u003c\/strong\u003e (TTL, BNC, rising\/falling edge)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-uts1032b-3-2ghz-advanced-series-spectrum-analyzer-detector\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTS1000B-Detector.png\" alt=\"UNI-T UTS1032B Detector Modes\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eUNI-T UTS1032B Detector Modes\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch3\u003eSCPI Remote Control for Automated Test\u003c\/h3\u003e\n\u003cp\u003eThe UTS1032B responds to industry-standard SCPI commands over both USB-Device (USB-B 2.0) and LAN VXI-11 (RJ-45). That means it drops cleanly into pyvisa, LabVIEW, NI-MAX, or any other test framework that talks to standard instruments — no proprietary protocol layer to learn, no special drivers beyond a USB or LAN connection. Whether you're building a production test rig, automating a parametric sweep, or running unattended overnight data collection, the interface scales the same way the rest of the bench does.\u003c\/p\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eSoftware Options for Specialized Measurements\u003c\/h3\u003e\n\u003cp\u003eThe UTS1032B starts as a capable general-purpose spectrum analyzer and grows into specialized roles through software options — the instrument hardware is the same; the options unlock measurement modes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUTS1000-AMK (Advanced Measurement Kit)\u003c\/strong\u003e — adds channel power, adjacent channel power (ACP), occupied bandwidth (OBW), time-domain power, carrier-to-noise ratio (CNR), third-order intercept (TOI), and harmonic measurements (up to the 10th harmonic), plus a spectrogram display for time-history visualization\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUTS1000-AMA (Analog Demodulation)\u003c\/strong\u003e — AM and FM demodulation analysis with modulation rate, depth, and frequency offset measurements (20 Hz – 100 kHz modulation rate range)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUTS1000-VSA (Digital Demodulation)\u003c\/strong\u003e — ASK, FSK (2\/4\/8\/16-level), MSK\/GMSK, PSK (BPSK, QPSK, OQPSK, 8PSK), DPSK, and QAM (16\/32\/64\/128\/256) demodulation analysis with constellation, eye diagram, and EVM measurements\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUTS1000-EMI (EMI Pre-Compliance)\u003c\/strong\u003e — CISPR-aligned QP\/AVG\/PEAK detectors, EMI band sweep, and limit-line analysis. Pairs with the optional UTS-EMI01 near-field probe kit (3 mm to 10 cm probes) for board-level emission hunting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-uts1032b-3-2ghz-advanced-series-spectrum-analyzer-options-emi\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTS1000B-EMI.png\" alt=\"UNI-T UTS1032B EMI Pre-Compliance with UTS-EMI01 Probes\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eUNI-T UTS1032B EMI Pre-Compliance with UTS-EMI01 Probes\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch3\u003eBuilt for Working Lab Environments\u003c\/h3\u003e\n\u003cp\u003eA spectrum analyzer that lives next to soldering stations, drilling, and general bench work will breathe in dust over time. The UTS1032B addresses this with forced-air cooling and a \u003cstrong\u003euser-removable dust filter\u003c\/strong\u003e — pop it out, vacuum or blow it off, and slide it back. No tools, no service-center trip, no fan failures from dust accumulation. Operating range is 0 °C to +40 °C, storage to -20 °C \/ +70 °C, with full ±1 ppm timebase stability across the operational temperature range.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ca id=\"lb-uts1032b-3-2ghz-advanced-series-spectrum-analyzer-selectivity\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTS1000B-Selectivity.png\" alt=\"UNI-T UTS1032B Selectivity\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eUNI-T UTS1032B Selectivity\u003c\/span\u003e\n\u003c\/a\u003e\n\u003ca id=\"lb-uts1032b-3-2ghz-advanced-series-spectrum-analyzer-touch\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTS1000B-Touch.png\" alt=\"UNI-T UTS1032B Touch Interface\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eUNI-T UTS1032B Touch Interface\u003c\/span\u003e\n\u003c\/a\u003e\n\u003ca id=\"lb-uts1032b-3-2ghz-advanced-series-spectrum-analyzer-detector\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTS1000B-Detector.png\" alt=\"UNI-T UTS1032B Detector Modes\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eUNI-T UTS1032B Detector Modes\u003c\/span\u003e\n\u003c\/a\u003e\n\u003ca id=\"lb-uts1032b-3-2ghz-advanced-series-spectrum-analyzer-options-emi\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTS1000B-EMI.png\" alt=\"UNI-T UTS1032B EMI Pre-Compliance with UTS-EMI01 Probes\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eUNI-T UTS1032B EMI Pre-Compliance with UTS-EMI01 Probes\u003c\/span\u003e\n\u003c\/a\u003e\n\u003ch2\u003eApplications\u003c\/h2\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch3\u003eEducational and Training Labs\u003c\/h3\u003e\n\u003cp\u003eThe 10.1-inch multi-touch interface makes the UTS1032B unusually approachable for students learning RF for the first time. Cost-conscious purchasing for university and technical college labs gets a fully-featured spectrum analyzer with the same UI patterns students will encounter on more expensive instruments later. Curriculum fit: communications systems, radio engineering, electronics fundamentals, antenna theory, EMC introduction.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch3\u003eWireless Device Development (sub-3.2 GHz)\u003c\/h3\u003e\n\u003cp\u003eCover 2.4 GHz Wi-Fi, Bluetooth (Classic and Low Energy), ZigBee, Z-Wave, sub-GHz ISM radios (315\/433\/868\/915 MHz), and LoRa — the radio standards that dominate IoT and consumer wireless. Characterize transmit spectrum, harmonics, spurious emissions, and channel power (with the AMK option) during product development and pre-production testing.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch3\u003eEMI Pre-Compliance Investigation\u003c\/h3\u003e\n\u003cp\u003eCatch radiated and conducted emissions issues before sending boards to a full CISPR\/FCC compliance lab. With the UTS1000-EMI option plus the UTS-EMI01 near-field probe kit (3 mm to 10 cm probes, 30 MHz – 3 GHz), the UTS1032B becomes a board-level emission hunter — sweep with QP\/AVG\/PEAK detectors, overlay limit lines, and localize hot spots on the PCB before they cost you a failed compliance test.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch3\u003eRF Service, Repair, and Maintenance\u003c\/h3\u003e\n\u003cp\u003eA capable bench instrument for two-way radio shops, broadcast engineering, antenna service work, and field calibration support. Marker counter functions, harmonic measurements (with AMK), and the touch interface make routine service work quick — the same RF diagnostic toolkit a more expensive analyzer offers, in a more accessible package.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eAccessories and Family Options\u003c\/h2\u003e\n\u003ch3\u003eIncluded with Every Unit\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUTS1000B-series Spectrum Analyzer (instrument)\u003c\/li\u003e\n\u003cli\u003ePower cord\u003c\/li\u003e\n\u003cli\u003eUSB cable (UT-D04)\u003c\/li\u003e\n\u003cli\u003eEnglish download guide\u003c\/li\u003e\n\u003cli\u003eMulti-language safety manual\u003c\/li\u003e\n\u003cli\u003eFactory calibration certificate\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eRecommended Software Options\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/uts1000b-amk\"\u003eUTS1000-AMK\u003c\/a\u003e — Advanced Measurement Kit (channel power, ACP, OBW, TOI, harmonics, spectrogram)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/uts1000b-ama\"\u003eUTS1000-AMA\u003c\/a\u003e — Analog Demodulation (AM and FM)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/uts1000b-emi\"\u003eUTS1000-EMI\u003c\/a\u003e — EMI Pre-Compliance Software\u003c\/li\u003e\n\u003cli\u003eUTS1000-VSA — Digital Demodulation (ASK, FSK, MSK, PSK, DPSK, QAM)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eRecommended Accessories\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUTS-EMI01 near-field probe kit — four probes (30 MHz – 3 GHz, 3 mm to 10 cm resolution) for PCB-level emission hunting with the UTS1000-EMI option\u003c\/li\u003e\n\u003cli\u003eUT-CK01 accessories kit — SMA\/N adapters, cables, and antennas (824–960 MHz, 1710–1990 MHz, 2400–2500 MHz) for general RF setup\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/bag-b3-carry-bag\"\u003eBAG-B3 Carry Bag\u003c\/a\u003e — protective transport case sized for the UTS1000 series\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFamily Members\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/uts1015b-1-5ghz-advanced-series-spectrum-analyzer\"\u003eUTS1015B\u003c\/a\u003e — 1.5 GHz, no tracking generator — lowest entry point\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/uts1015t-1-5ghz-advanced-series-spectrum-analyzer-with-tracking-generator\"\u003eUTS1015T\u003c\/a\u003e — 1.5 GHz with tracking generator\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUTS1032B\u003c\/strong\u003e — 3.2 GHz, no tracking generator \u003cem\u003e(this product)\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/uts1032t-3-2ghz-advanced-series-spectrum-analyzer-with-tracking-generator\"\u003eUTS1032T\u003c\/a\u003e — 3.2 GHz with tracking generator\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eWhat's the DANL of the UTS1032B, and what does that mean for my measurements?\u003c\/p\u003e\n\u003cp\u003eThe UTS1032B reaches a typical displayed average noise level of \u003cstrong\u003e-161 dBm\/Hz\u003c\/strong\u003e with the preamp on in the 200 MHz – 1.5 GHz band, slightly higher (less sensitive) at the lowest and highest frequencies of its range. Practically: signals down around -120 dBm are visible above the noise floor with reasonable RBW settings (e.g., 1 kHz). For ultimate weak-signal work, narrow the RBW (each 10× reduction drops the noise floor by 10 dB) and enable averaging.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eCan I add a tracking generator to the UTS1032B later?\u003c\/p\u003e\n\u003cp\u003eNo — the tracking generator is integrated hardware on the T-variants (UTS1032T). If you anticipate needing scalar network measurements (filter sweeps, amplifier response, return loss), consider the UTS1032T instead. The B-model is the right choice when you're primarily doing spectrum analysis and don't need a tracking source.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eHow does the UTS1032B compare to the higher-end UTS3000T+ series?\u003c\/p\u003e\n\u003cp\u003eThe UTS1000B series is the entry tier — same modern touch UI and the same standard SCPI\/LAN interfaces, with -161 dBm DANL and \u0026lt;-98 dBc\/Hz phase noise. The UTS3000T+ Performance series steps up to -164 to -165 dBm DANL, adds features like a waterfall display, peak table, VSWR\/return loss measurements, and reflection analysis, and ships with the tracking generator integrated as standard. For an educational lab, RF hobbyist work, IoT\/wireless development, or EMI pre-compliance investigation, the UTS1000B series is well-matched at a much lower price point. For professional RF design work where measurement margin matters, look at the UTS3015T+ or UTS3032T+.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eWhat software options are available, and what do they add?\u003c\/p\u003e\n\u003cp\u003eFour software options expand the UTS1032B's measurement capabilities: \u003cstrong\u003eUTS1000-AMK\u003c\/strong\u003e (Advanced Measurement Kit) adds channel power, ACP, OBW, time-domain power, CNR, TOI, and harmonic measurements with a spectrogram display. \u003cstrong\u003eUTS1000-AMA\u003c\/strong\u003e adds AM\/FM analog demodulation analysis. \u003cstrong\u003eUTS1000-VSA\u003c\/strong\u003e adds digital demodulation for ASK, FSK, MSK, PSK, DPSK, and QAM signals up to 256-QAM. \u003cstrong\u003eUTS1000-EMI\u003c\/strong\u003e adds CISPR-aligned EMI pre-compliance with QP\/AVG\/PEAK detectors and limit-line support — it pairs with the optional UTS-EMI01 near-field probe kit for PCB-level emission localization.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eIs the UTS1032B suitable for automated test (ATE)?\u003c\/p\u003e\n\u003cp\u003eYes. The UTS1032B accepts standard SCPI commands over USB-Device (USB-B 2.0) and LAN VXI-11 (RJ-45). It drops into pyvisa, LabVIEW, NI-MAX, or any framework that talks to standard test instruments — no proprietary driver layer required beyond a USB or LAN connection. The full SCPI command set is documented in the UTS1000B Programming Manual.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003c\/div\u003e","brand":"UNI-T","offers":[{"title":"Default Title","offer_id":46699410981148,"sku":"181200100012X","price":1679.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UTS1032B_Cables.jpg?v=1720807372"},{"product_id":"uts1015t","title":"UTS1015T 1.5 GHz Spectrum Analyzer with Tracking Generator","description":"\u003ch1\u003eUNI-T UTS1015T Advanced-Series 1.5GHz Spectrum Analyzer with Tracking Generator: Capable Entry-Level RF Analysis\u003c\/h1\u003e\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eUNI-T UTS1015T Advanced-Series Spectrum Analyzer\u003c\/strong\u003e brings full-featured RF analysis into reach for educators, hobbyists, and engineers who need a capable instrument without the price tag of a high-end performance analyzer. Covering \u003cstrong\u003e9 kHz – 1.5 GHz\u003c\/strong\u003e with an integrated tracking generator, the UTS1015T pairs a 10.1-inch capacitive multi-touch display with a 1 Hz resolution bandwidth floor and up to 10,001 sweep points — the kind of detail that lets you see what you actually need to see, whether you're chasing a stray spur or building familiarity with RF.\u003c\/p\u003e\n\u003cp\u003eA typical displayed average noise level of \u003cstrong\u003e-161 dBm\/Hz\u003c\/strong\u003e (preamp on) and phase noise of \u003cstrong\u003e\u0026lt;-98 dBc\/Hz\u003c\/strong\u003e at a 10 kHz offset deliver the dynamic range needed for everyday signal characterization in the sub-1.5GHz band. Standard interfaces include HDMI 1.4 display output, USB-A 3.0 (Host), USB-B 2.0 (Device), and Gigabit LAN with full SCPI support — the UTS1015T fits as easily on a benchtop next to a soldering iron as it does in a remotely-driven automated test rack.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cdiv class=\"product-key-features\"\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e9 kHz – 1.5 GHz frequency coverage\u003c\/strong\u003e — spans the bands used in Wi-Fi, BLE, ZigBee, LoRa, sub-GHz ISM, and general wireless development\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e-161 dBm\/Hz typical DANL\u003c\/strong\u003e — with preamp on, sensitive enough to resolve low-level signals and harmonics\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u0026lt;-98 dBc\/Hz phase noise @ 10 kHz offset\u003c\/strong\u003e — clean enough to evaluate nearby carriers and modulated signals\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1 Hz – 1 MHz RBW\u003c\/strong\u003e in 1-3-10 steps — gives you fine selectivity control all the way down to a 1 Hz resolution floor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e10,001 sweep points\u003c\/strong\u003e — deep trace detail for finding the signals that lower-resolution analyzers miss\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e10.1-inch capacitive multi-touch display\u003c\/strong\u003e (1280 × 800) — same modern UI style as the higher-end performance series, with gesture-based zoom and pan\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated tracking generator\u003c\/strong\u003e (100 kHz – 1.5 GHz) — built-in scalar network analysis for filters, amplifiers, and antennas\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull remote control\u003c\/strong\u003e — SCPI over USB-Device and LAN (VXI-11) for automated test setups and remote bench access\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOption-extensible\u003c\/strong\u003e — add UTS1000-AMA (analog demodulation), UTS1000-AMK (advanced measurement kit), or UTS1000-EMI (EMI pre-compliance) as your needs grow\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt to last in working environments\u003c\/strong\u003e — forced-air cooling with a user-removable dust filter to keep the internals clean\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eUNI-T UTS1015T Details\u003c\/h2\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eFrequency Coverage (9 kHz – 1.5 GHz)\u003c\/h3\u003e\n\u003cp\u003eThe UTS1015T sweeps continuously from 9 kHz up to 1.5 GHz, with a 1 Hz frequency resolution and marker counter accuracy on the same order. Coverage runs from VLF on up through VHF and UHF, with one notable ceiling: the 2.4 GHz ISM band sits just above the UTS1015T's 1.5 GHz range. That makes the UTS1015T a strong fit for sub-GHz ISM radios, FM broadcast and aviation bands, and lower-frequency wireless device development — but if your work involves 2.4 GHz Wi-Fi, Bluetooth, or Zigbee, look at the UTS1032 variants (3.2 GHz) or the UTS3032T+ Performance-series instead. A 1 Hz frequency reference calibration accuracy with \u0026lt;1 ppm temperature stability keeps the measurement steady across the calibration cycle.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-uts1015t-1-5ghz-advanced-series-spectrum-analyzer-with-tracking-generator-selectivity\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTS1000B-Selectivity.png\" alt=\"UNI-T UTS1015T Selectivity\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eUNI-T UTS1015T Selectivity\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch3\u003eSensitivity (DANL as low as -161 dBm\/Hz)\u003c\/h3\u003e\n\u003cp\u003eWeak-signal testing depends on how quiet the analyzer itself is. With the preamp on, the UTS1015T reaches a typical displayed average noise level of \u003cstrong\u003e-161 dBm\/Hz\u003c\/strong\u003e in the 200 MHz – 1.5 GHz band — low enough to resolve faint emissions, identify harmonic energy well below the carrier, and characterize signals near the noise floor. Five detector modes (Sample, Peak, Negative, Normal, Average) and four trace types (Clear\/Write, Average, Max Hold, Min Hold) give you the flexibility to optimize what the trace shows for any measurement context.\u003c\/p\u003e\n\u003ch3\u003ePhase Noise (\u0026lt;-98 dBc\/Hz at 10 kHz offset)\u003c\/h3\u003e\n\u003cp\u003eClean local oscillator performance matters when you're looking at signals close to a strong carrier — modulated signals, narrowband interference, or oscillator quality measurements. With \u003cstrong\u003etypical phase noise of \u0026lt;-98 dBc\/Hz at a 10 kHz offset\u003c\/strong\u003e from a 1 GHz carrier (with a 1 kHz RBW and 10 Hz VBW), the UTS1015T resolves close-in spectral content without the phase noise pedestal washing it out.\u003c\/p\u003e\n\u003ch3\u003e1 Hz – 1 MHz Resolution Bandwidth\u003c\/h3\u003e\n\u003cp\u003eResolution bandwidth in 1-3-10 steps, from 1 Hz all the way to 1 MHz, gives you the right sweep speed\/selectivity tradeoff for any measurement. Drop the RBW to 1 Hz to separate signals closer together in frequency than most entry-level analyzers can manage; widen it for fast high-level surveys. Bandwidth accuracy holds to within 5% nominal, and switching between resolution settings introduces only ±0.2 dB relative amplitude uncertainty. The UTS1015T also offers FFT sweep mode (1 Hz – 30 kHz RBW range) when you need faster measurement times in narrowband settings.\u003c\/p\u003e\n\u003ch3\u003e10,001 Sweep Points\u003c\/h3\u003e\n\u003cp\u003eMore points across a trace means finer frequency resolution per pixel and a much better chance of catching signals that fall between coarser bins. The UTS1015T provides up to \u003cstrong\u003e10,001 sweep points per trace\u003c\/strong\u003e — enough resolution to clearly distinguish closely-spaced signals, identify intermittent emissions, and read marker frequencies with confidence. Combined with four independent traces, you can simultaneously display raw, max-hold, min-hold, and averaged versions of the same span.\u003c\/p\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003e10.1-inch Multi-Touch Interface\u003c\/h3\u003e\n\u003cp\u003eThe UTS1015T uses the same 10.1-inch capacitive multi-touch display (1280 × 800 HD resolution) found on UNI-T's higher-end performance series — a feature you don't usually find at this price tier. Pinch, drag, and zoom directly on the trace, set markers by tapping where you want them, and navigate menus the way you'd expect on a modern tablet. For lab environments where a USB mouse or keyboard is more practical, the UTS1015T accepts those through the USB Host port.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-uts1015t-1-5ghz-advanced-series-spectrum-analyzer-with-tracking-generator-touch\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTS1000B-Touch.png\" alt=\"UNI-T UTS1015T Touch Interface\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eUNI-T UTS1015T Touch Interface\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch3\u003eMarker Suite (4 Markers with 5 Functions)\u003c\/h3\u003e\n\u003cp\u003eFour markers with three modes (Normal, Delta, Fixed) cover the basic measurement vocabulary — reading absolute level, computing delta between two points, locking a marker to a frequency for sweep-to-sweep comparison. Five built-in marker functions go further: \u003cstrong\u003eMarker Noise\u003c\/strong\u003e reads noise density in dBm\/Hz at the marker, \u003cstrong\u003eBand Power\u003c\/strong\u003e integrates total power over a user-defined band, \u003cstrong\u003eBand Density\u003c\/strong\u003e reports power per Hz across that band, \u003cstrong\u003eN dB\u003c\/strong\u003e auto-finds the points N dB down from a peak (useful for measuring -3 dB or -6 dB bandwidths), and \u003cstrong\u003eCounter\u003c\/strong\u003e reads frequency to 1 Hz resolution.\u003c\/p\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eConnectivity (HDMI, USB, LAN)\u003c\/h3\u003e\n\u003cp\u003eA full set of standard rear-panel interfaces makes the UTS1015T easy to fit into any workflow:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRF Input:\u003c\/strong\u003e Type-N female, 50 Ω — the rugged industry-standard RF connector\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHDMI 1.4 display output\u003c\/strong\u003e — mirror the trace to an external monitor or projector for class demos or shared review\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB-A 3.0 Host\u003c\/strong\u003e — thumb drive for screenshots and data export, plus mouse\/keyboard if you prefer them\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB-B 2.0 Device\u003c\/strong\u003e — SCPI communication with a PC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLAN VXI-11 (10\/100\/1000 Base, RJ-45)\u003c\/strong\u003e — networked remote control\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e10 MHz reference in\/out\u003c\/strong\u003e (BNC) — lock to an external timebase or share the internal reference with other instruments\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExternal trigger input\u003c\/strong\u003e (TTL, BNC, rising\/falling edge)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-uts1015t-1-5ghz-advanced-series-spectrum-analyzer-with-tracking-generator-detector\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTS1000B-Detector.png\" alt=\"UNI-T UTS1015T Detector Modes\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eUNI-T UTS1015T Detector Modes\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch3\u003eSCPI Remote Control for Automated Test\u003c\/h3\u003e\n\u003cp\u003eThe UTS1015T responds to industry-standard SCPI commands over both USB-Device (USB-B 2.0) and LAN VXI-11 (RJ-45). That means it drops cleanly into pyvisa, LabVIEW, NI-MAX, or any other test framework that talks to standard instruments — no proprietary protocol layer to learn, no special drivers beyond a USB or LAN connection. Whether you're building a production test rig, automating a parametric sweep, or running unattended overnight data collection, the interface scales the same way the rest of the bench does.\u003c\/p\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eIntegrated Tracking Generator (100 kHz – 1.5 GHz)\u003c\/h3\u003e\n\u003cp\u003eThe UTS1015T includes a built-in tracking generator that produces a synchronized swept output matched to the analyzer's receive frequency — effectively turning the instrument into a scalar network analyzer for transmission measurements. Sweep filters, amplifiers, and matching networks directly, with output power adjustable from -40 dBm to 0 dBm in 0.5 dB steps and ±3 dB (relative to 50 MHz) flatness relative to 50 MHz. The TG output uses a separate front-panel Type-N female 50 Ω connector, so you can keep your measurement setup wired and just route the source where you need it.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-uts1015t-1-5ghz-advanced-series-spectrum-analyzer-with-tracking-generator-tg-scan\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTS1000B-Scan.png\" alt=\"UNI-T UTS1015T Scan with Tracking Generator\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eUNI-T UTS1015T Scan with Tracking Generator\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eSoftware Options for Specialized Measurements\u003c\/h3\u003e\n\u003cp\u003eThe UTS1015T starts as a capable general-purpose spectrum analyzer and grows into specialized roles through software options — the instrument hardware is the same; the options unlock measurement modes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUTS1000-AMK (Advanced Measurement Kit)\u003c\/strong\u003e — adds channel power, adjacent channel power (ACP), occupied bandwidth (OBW), time-domain power, carrier-to-noise ratio (CNR), third-order intercept (TOI), and harmonic measurements (up to the 10th harmonic), plus a spectrogram display for time-history visualization\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUTS1000-AMA (Analog Demodulation)\u003c\/strong\u003e — AM and FM demodulation analysis with modulation rate, depth, and frequency offset measurements (20 Hz – 100 kHz modulation rate range)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUTS1000-VSA (Digital Demodulation)\u003c\/strong\u003e — ASK, FSK (2\/4\/8\/16-level), MSK\/GMSK, PSK (BPSK, QPSK, OQPSK, 8PSK), DPSK, and QAM (16\/32\/64\/128\/256) demodulation analysis with constellation, eye diagram, and EVM measurements\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUTS1000-EMI (EMI Pre-Compliance)\u003c\/strong\u003e — CISPR-aligned QP\/AVG\/PEAK detectors, EMI band sweep, and limit-line analysis. Pairs with the optional UTS-EMI01 near-field probe kit (3 mm to 10 cm probes) for board-level emission hunting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-uts1015t-1-5ghz-advanced-series-spectrum-analyzer-with-tracking-generator-options-emi\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTS1000B-EMI.png\" alt=\"UNI-T UTS1015T EMI Pre-Compliance with UTS-EMI01 Probes\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eUNI-T UTS1015T EMI Pre-Compliance with UTS-EMI01 Probes\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch3\u003eBuilt for Working Lab Environments\u003c\/h3\u003e\n\u003cp\u003eA spectrum analyzer that lives next to soldering stations, drilling, and general bench work will breathe in dust over time. The UTS1015T addresses this with forced-air cooling and a \u003cstrong\u003euser-removable dust filter\u003c\/strong\u003e — pop it out, vacuum or blow it off, and slide it back. No tools, no service-center trip, no fan failures from dust accumulation. Operating range is 0 °C to +40 °C, storage to -20 °C \/ +70 °C, with full ±1 ppm timebase stability across the operational temperature range.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ca id=\"lb-uts1015t-1-5ghz-advanced-series-spectrum-analyzer-with-tracking-generator-selectivity\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTS1000B-Selectivity.png\" alt=\"UNI-T UTS1015T Selectivity\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eUNI-T UTS1015T Selectivity\u003c\/span\u003e\n\u003c\/a\u003e\n\u003ca id=\"lb-uts1015t-1-5ghz-advanced-series-spectrum-analyzer-with-tracking-generator-touch\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTS1000B-Touch.png\" alt=\"UNI-T UTS1015T Touch Interface\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eUNI-T UTS1015T Touch Interface\u003c\/span\u003e\n\u003c\/a\u003e\n\u003ca id=\"lb-uts1015t-1-5ghz-advanced-series-spectrum-analyzer-with-tracking-generator-detector\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTS1000B-Detector.png\" alt=\"UNI-T UTS1015T Detector Modes\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eUNI-T UTS1015T Detector Modes\u003c\/span\u003e\n\u003c\/a\u003e\n\u003ca id=\"lb-uts1015t-1-5ghz-advanced-series-spectrum-analyzer-with-tracking-generator-tg-scan\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTS1000B-Scan.png\" alt=\"UNI-T UTS1015T Scan with Tracking Generator\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eUNI-T UTS1015T Scan with Tracking Generator\u003c\/span\u003e\n\u003c\/a\u003e\n\u003ca id=\"lb-uts1015t-1-5ghz-advanced-series-spectrum-analyzer-with-tracking-generator-options-emi\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTS1000B-EMI.png\" alt=\"UNI-T UTS1015T EMI Pre-Compliance with UTS-EMI01 Probes\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eUNI-T UTS1015T EMI Pre-Compliance with UTS-EMI01 Probes\u003c\/span\u003e\n\u003c\/a\u003e\n\u003ch2\u003eApplications\u003c\/h2\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch3\u003eEducational and Training Labs\u003c\/h3\u003e\n\u003cp\u003eThe 10.1-inch multi-touch interface makes the UTS1015T unusually approachable for students learning RF for the first time. Cost-conscious purchasing for university and technical college labs gets a fully-featured spectrum analyzer with the same UI patterns students will encounter on more expensive instruments later. Curriculum fit: communications systems, radio engineering, electronics fundamentals, antenna theory, EMC introduction.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch3\u003eSub-GHz and FM Band Work\u003c\/h3\u003e\n\u003cp\u003eAt 1.5 GHz, the UTS1015T covers VHF\/UHF service bands, FM broadcast, aviation\/marine, sub-GHz ISM (315\/433\/868\/915 MHz), LoRa, Z-Wave, and 433\/915 MHz LPWAN. A natural fit for radio hobbyists, amateur (ham) radio operators, RF telemetry projects, and sub-GHz IoT device development. Step up to the UTS1032 variant if 2.4 GHz Wi-Fi or Bluetooth coverage matters.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch3\u003eEMI Pre-Compliance Investigation\u003c\/h3\u003e\n\u003cp\u003eCatch radiated and conducted emissions issues before sending boards to a full CISPR\/FCC compliance lab. With the UTS1000-EMI option plus the UTS-EMI01 near-field probe kit (3 mm to 10 cm probes, 30 MHz – 3 GHz), the UTS1015T becomes a board-level emission hunter — sweep with QP\/AVG\/PEAK detectors, overlay limit lines, and localize hot spots on the PCB before they cost you a failed compliance test.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch3\u003eRF Service, Repair, and Maintenance\u003c\/h3\u003e\n\u003cp\u003eA capable bench instrument for two-way radio shops, broadcast engineering, antenna service work, and field calibration support. Marker counter functions, harmonic measurements (with AMK), and the touch interface make routine service work quick — the same RF diagnostic toolkit a more expensive analyzer offers, in a more accessible package.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch3\u003eFilter and Component Characterization\u003c\/h3\u003e\n\u003cp\u003eThe integrated tracking generator opens up scalar transmission measurements: insertion loss, gain, frequency response, and stopband rejection on filters, amplifiers, attenuators, and antennas. Sweep across 100 kHz – 1.5 GHz and read the response directly on the analyzer trace — no separate signal generator needed.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eAccessories and Family Options\u003c\/h2\u003e\n\u003ch3\u003eIncluded with Every Unit\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUTS1000B-series Spectrum Analyzer (instrument)\u003c\/li\u003e\n\u003cli\u003ePower cord\u003c\/li\u003e\n\u003cli\u003eUSB cable (UT-D04)\u003c\/li\u003e\n\u003cli\u003eEnglish download guide\u003c\/li\u003e\n\u003cli\u003eMulti-language safety manual\u003c\/li\u003e\n\u003cli\u003eFactory calibration certificate\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eRecommended Software Options\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/uts1000b-amk\"\u003eUTS1000-AMK\u003c\/a\u003e — Advanced Measurement Kit (channel power, ACP, OBW, TOI, harmonics, spectrogram)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/uts1000b-ama\"\u003eUTS1000-AMA\u003c\/a\u003e — Analog Demodulation (AM and FM)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/uts1000b-emi\"\u003eUTS1000-EMI\u003c\/a\u003e — EMI Pre-Compliance Software\u003c\/li\u003e\n\u003cli\u003eUTS1000-VSA — Digital Demodulation (ASK, FSK, MSK, PSK, DPSK, QAM)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eRecommended Accessories\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUTS-EMI01 near-field probe kit — four probes (30 MHz – 3 GHz, 3 mm to 10 cm resolution) for PCB-level emission hunting with the UTS1000-EMI option\u003c\/li\u003e\n\u003cli\u003eUT-CK01 accessories kit — SMA\/N adapters, cables, and antennas (824–960 MHz, 1710–1990 MHz, 2400–2500 MHz) for general RF setup\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/bag-b3-carry-bag\"\u003eBAG-B3 Carry Bag\u003c\/a\u003e — protective transport case sized for the UTS1000 series\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFamily Members\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/uts1015b-1-5ghz-advanced-series-spectrum-analyzer\"\u003eUTS1015B\u003c\/a\u003e — 1.5 GHz, no tracking generator — lowest entry point\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUTS1015T\u003c\/strong\u003e — 1.5 GHz with tracking generator \u003cem\u003e(this product)\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/uts1032b-3-2ghz-advanced-series-spectrum-analyzer\"\u003eUTS1032B\u003c\/a\u003e — 3.2 GHz, no tracking generator\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/uts1032t-3-2ghz-advanced-series-spectrum-analyzer-with-tracking-generator\"\u003eUTS1032T\u003c\/a\u003e — 3.2 GHz with tracking generator\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eWhat's the DANL of the UTS1015T, and what does that mean for my measurements?\u003c\/p\u003e\n\u003cp\u003eThe UTS1015T reaches a typical displayed average noise level of \u003cstrong\u003e-161 dBm\/Hz\u003c\/strong\u003e with the preamp on in the 200 MHz – 1.5 GHz band, slightly higher (less sensitive) at the lowest and highest frequencies of its range. Practically: signals down around -120 dBm are visible above the noise floor with reasonable RBW settings (e.g., 1 kHz). For ultimate weak-signal work, narrow the RBW (each 10× reduction drops the noise floor by 10 dB) and enable averaging.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eWhat can I measure with the tracking generator?\u003c\/p\u003e\n\u003cp\u003eThe TG generates a swept output that follows the analyzer's receive frequency from 100 kHz – 1.5 GHz, with output power adjustable from -40 dBm to 0 dBm in 0.5 dB steps. You can sweep filters (insertion loss, frequency response, bandwidth), amplifiers (gain, frequency response), passive networks (return loss with a directional coupler), and antennas (basic return-loss sweeps with a directional coupler or bridge). The TG output uses a separate front-panel Type-N connector so it can stay cabled to your DUT input.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eHow does the UTS1015T compare to the higher-end UTS3000T+ series?\u003c\/p\u003e\n\u003cp\u003eThe UTS1000B series is the entry tier — same modern touch UI and the same standard SCPI\/LAN interfaces, with -161 dBm DANL and \u0026lt;-98 dBc\/Hz phase noise. The UTS3000T+ Performance series steps up to -164 to -165 dBm DANL, adds features like a waterfall display, peak table, VSWR\/return loss measurements, and reflection analysis, and ships with the tracking generator integrated as standard. For an educational lab, RF hobbyist work, IoT\/wireless development, or EMI pre-compliance investigation, the UTS1000B series is well-matched at a much lower price point. For professional RF design work where measurement margin matters, look at the UTS3015T+ or UTS3032T+.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eWhat software options are available, and what do they add?\u003c\/p\u003e\n\u003cp\u003eFour software options expand the UTS1015T's measurement capabilities: \u003cstrong\u003eUTS1000-AMK\u003c\/strong\u003e (Advanced Measurement Kit) adds channel power, ACP, OBW, time-domain power, CNR, TOI, and harmonic measurements with a spectrogram display. \u003cstrong\u003eUTS1000-AMA\u003c\/strong\u003e adds AM\/FM analog demodulation analysis. \u003cstrong\u003eUTS1000-VSA\u003c\/strong\u003e adds digital demodulation for ASK, FSK, MSK, PSK, DPSK, and QAM signals up to 256-QAM. \u003cstrong\u003eUTS1000-EMI\u003c\/strong\u003e adds CISPR-aligned EMI pre-compliance with QP\/AVG\/PEAK detectors and limit-line support — it pairs with the optional UTS-EMI01 near-field probe kit for PCB-level emission localization.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eIs the UTS1015T suitable for automated test (ATE)?\u003c\/p\u003e\n\u003cp\u003eYes. The UTS1015T accepts standard SCPI commands over USB-Device (USB-B 2.0) and LAN VXI-11 (RJ-45). It drops into pyvisa, LabVIEW, NI-MAX, or any framework that talks to standard test instruments — no proprietary driver layer required beyond a USB or LAN connection. The full SCPI command set is documented in the UTS1000B Programming Manual.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003c\/div\u003e","brand":"UNI-T","offers":[{"title":"Default Title","offer_id":46699505221916,"sku":"181200100013X","price":979.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UTS1015T_Cables.jpg?v=1720807381"},{"product_id":"uts1015b","title":"UTS1015B 1.5GHz Advanced-Series Spectrum Analyzer","description":"\u003ch1\u003eUNI-T UTS1015B Advanced-Series 1.5GHz Spectrum Analyzer: Capable Entry-Level RF Analysis\u003c\/h1\u003e\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eUNI-T UTS1015B Advanced-Series Spectrum Analyzer\u003c\/strong\u003e brings full-featured RF analysis into reach for educators, hobbyists, and engineers who need a capable instrument without the price tag of a high-end performance analyzer. Covering \u003cstrong\u003e9 kHz – 1.5 GHz\u003c\/strong\u003e, the UTS1015B pairs a 10.1-inch capacitive multi-touch display with a 1 Hz resolution bandwidth floor and up to 10,001 sweep points — the kind of detail that lets you see what you actually need to see, whether you're chasing a stray spur or building familiarity with RF.\u003c\/p\u003e\n\u003cp\u003eA typical displayed average noise level of \u003cstrong\u003e-161 dBm\/Hz\u003c\/strong\u003e (preamp on) and phase noise of \u003cstrong\u003e\u0026lt;-98 dBc\/Hz\u003c\/strong\u003e at a 10 kHz offset deliver the dynamic range needed for everyday signal characterization in the sub-1.5GHz band. Standard interfaces include HDMI 1.4 display output, USB-A 3.0 (Host), USB-B 2.0 (Device), and Gigabit LAN with full SCPI support — the UTS1015B fits as easily on a benchtop next to a soldering iron as it does in a remotely-driven automated test rack.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cdiv class=\"product-key-features\"\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e9 kHz – 1.5 GHz frequency coverage\u003c\/strong\u003e — spans the bands used in Wi-Fi, BLE, ZigBee, LoRa, sub-GHz ISM, and general wireless development\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e-161 dBm\/Hz typical DANL\u003c\/strong\u003e — with preamp on, sensitive enough to resolve low-level signals and harmonics\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u0026lt;-98 dBc\/Hz phase noise @ 10 kHz offset\u003c\/strong\u003e — clean enough to evaluate nearby carriers and modulated signals\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1 Hz – 1 MHz RBW\u003c\/strong\u003e in 1-3-10 steps — gives you fine selectivity control all the way down to a 1 Hz resolution floor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e10,001 sweep points\u003c\/strong\u003e — deep trace detail for finding the signals that lower-resolution analyzers miss\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e10.1-inch capacitive multi-touch display\u003c\/strong\u003e (1280 × 800) — same modern UI style as the higher-end performance series, with gesture-based zoom and pan\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull remote control\u003c\/strong\u003e — SCPI over USB-Device and LAN (VXI-11) for automated test setups and remote bench access\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOption-extensible\u003c\/strong\u003e — add UTS1000-AMA (analog demodulation), UTS1000-AMK (advanced measurement kit), or UTS1000-EMI (EMI pre-compliance) as your needs grow\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt to last in working environments\u003c\/strong\u003e — forced-air cooling with a user-removable dust filter to keep the internals clean\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eUNI-T UTS1015B Details\u003c\/h2\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eFrequency Coverage (9 kHz – 1.5 GHz)\u003c\/h3\u003e\n\u003cp\u003eThe UTS1015B sweeps continuously from 9 kHz up to 1.5 GHz, with a 1 Hz frequency resolution and marker counter accuracy on the same order. Coverage runs from VLF on up through VHF and UHF, with one notable ceiling: the 2.4 GHz ISM band sits just above the UTS1015B's 1.5 GHz range. That makes the UTS1015B a strong fit for sub-GHz ISM radios, FM broadcast and aviation bands, and lower-frequency wireless device development — but if your work involves 2.4 GHz Wi-Fi, Bluetooth, or Zigbee, look at the UTS1032 variants (3.2 GHz) or the UTS3032T+ Performance-series instead. A 1 Hz frequency reference calibration accuracy with \u0026lt;1 ppm temperature stability keeps the measurement steady across the calibration cycle.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-uts1015b-1-5ghz-advanced-series-spectrum-analyzer-selectivity\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTS1000B-Selectivity.png\" alt=\"UNI-T UTS1015B Selectivity\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eUNI-T UTS1015B Selectivity\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch3\u003eSensitivity (DANL as low as -161 dBm\/Hz)\u003c\/h3\u003e\n\u003cp\u003eWeak-signal testing depends on how quiet the analyzer itself is. With the preamp on, the UTS1015B reaches a typical displayed average noise level of \u003cstrong\u003e-161 dBm\/Hz\u003c\/strong\u003e in the 200 MHz – 1.5 GHz band — low enough to resolve faint emissions, identify harmonic energy well below the carrier, and characterize signals near the noise floor. Five detector modes (Sample, Peak, Negative, Normal, Average) and four trace types (Clear\/Write, Average, Max Hold, Min Hold) give you the flexibility to optimize what the trace shows for any measurement context.\u003c\/p\u003e\n\u003ch3\u003ePhase Noise (\u0026lt;-98 dBc\/Hz at 10 kHz offset)\u003c\/h3\u003e\n\u003cp\u003eClean local oscillator performance matters when you're looking at signals close to a strong carrier — modulated signals, narrowband interference, or oscillator quality measurements. With \u003cstrong\u003etypical phase noise of \u0026lt;-98 dBc\/Hz at a 10 kHz offset\u003c\/strong\u003e from a 1 GHz carrier (with a 1 kHz RBW and 10 Hz VBW), the UTS1015B resolves close-in spectral content without the phase noise pedestal washing it out.\u003c\/p\u003e\n\u003ch3\u003e1 Hz – 1 MHz Resolution Bandwidth\u003c\/h3\u003e\n\u003cp\u003eResolution bandwidth in 1-3-10 steps, from 1 Hz all the way to 1 MHz, gives you the right sweep speed\/selectivity tradeoff for any measurement. Drop the RBW to 1 Hz to separate signals closer together in frequency than most entry-level analyzers can manage; widen it for fast high-level surveys. Bandwidth accuracy holds to within 5% nominal, and switching between resolution settings introduces only ±0.2 dB relative amplitude uncertainty. The UTS1015B also offers FFT sweep mode (1 Hz – 30 kHz RBW range) when you need faster measurement times in narrowband settings.\u003c\/p\u003e\n\u003ch3\u003e10,001 Sweep Points\u003c\/h3\u003e\n\u003cp\u003eMore points across a trace means finer frequency resolution per pixel and a much better chance of catching signals that fall between coarser bins. The UTS1015B provides up to \u003cstrong\u003e10,001 sweep points per trace\u003c\/strong\u003e — enough resolution to clearly distinguish closely-spaced signals, identify intermittent emissions, and read marker frequencies with confidence. Combined with four independent traces, you can simultaneously display raw, max-hold, min-hold, and averaged versions of the same span.\u003c\/p\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003e10.1-inch Multi-Touch Interface\u003c\/h3\u003e\n\u003cp\u003eThe UTS1015B uses the same 10.1-inch capacitive multi-touch display (1280 × 800 HD resolution) found on UNI-T's higher-end performance series — a feature you don't usually find at this price tier. Pinch, drag, and zoom directly on the trace, set markers by tapping where you want them, and navigate menus the way you'd expect on a modern tablet. For lab environments where a USB mouse or keyboard is more practical, the UTS1015B accepts those through the USB Host port.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-uts1015b-1-5ghz-advanced-series-spectrum-analyzer-touch\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTS1000B-Touch.png\" alt=\"UNI-T UTS1015B Touch Interface\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eUNI-T UTS1015B Touch Interface\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch3\u003eMarker Suite (4 Markers with 5 Functions)\u003c\/h3\u003e\n\u003cp\u003eFour markers with three modes (Normal, Delta, Fixed) cover the basic measurement vocabulary — reading absolute level, computing delta between two points, locking a marker to a frequency for sweep-to-sweep comparison. Five built-in marker functions go further: \u003cstrong\u003eMarker Noise\u003c\/strong\u003e reads noise density in dBm\/Hz at the marker, \u003cstrong\u003eBand Power\u003c\/strong\u003e integrates total power over a user-defined band, \u003cstrong\u003eBand Density\u003c\/strong\u003e reports power per Hz across that band, \u003cstrong\u003eN dB\u003c\/strong\u003e auto-finds the points N dB down from a peak (useful for measuring -3 dB or -6 dB bandwidths), and \u003cstrong\u003eCounter\u003c\/strong\u003e reads frequency to 1 Hz resolution.\u003c\/p\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eConnectivity (HDMI, USB, LAN)\u003c\/h3\u003e\n\u003cp\u003eA full set of standard rear-panel interfaces makes the UTS1015B easy to fit into any workflow:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRF Input:\u003c\/strong\u003e Type-N female, 50 Ω — the rugged industry-standard RF connector\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHDMI 1.4 display output\u003c\/strong\u003e — mirror the trace to an external monitor or projector for class demos or shared review\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB-A 3.0 Host\u003c\/strong\u003e — thumb drive for screenshots and data export, plus mouse\/keyboard if you prefer them\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB-B 2.0 Device\u003c\/strong\u003e — SCPI communication with a PC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLAN VXI-11 (10\/100\/1000 Base, RJ-45)\u003c\/strong\u003e — networked remote control\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e10 MHz reference in\/out\u003c\/strong\u003e (BNC) — lock to an external timebase or share the internal reference with other instruments\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExternal trigger input\u003c\/strong\u003e (TTL, BNC, rising\/falling edge)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-uts1015b-1-5ghz-advanced-series-spectrum-analyzer-detector\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTS1000B-Detector.png\" alt=\"UNI-T UTS1015B Detector Modes\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eUNI-T UTS1015B Detector Modes\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch3\u003eSCPI Remote Control for Automated Test\u003c\/h3\u003e\n\u003cp\u003eThe UTS1015B responds to industry-standard SCPI commands over both USB-Device (USB-B 2.0) and LAN VXI-11 (RJ-45). That means it drops cleanly into pyvisa, LabVIEW, NI-MAX, or any other test framework that talks to standard instruments — no proprietary protocol layer to learn, no special drivers beyond a USB or LAN connection. Whether you're building a production test rig, automating a parametric sweep, or running unattended overnight data collection, the interface scales the same way the rest of the bench does.\u003c\/p\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eSoftware Options for Specialized Measurements\u003c\/h3\u003e\n\u003cp\u003eThe UTS1015B starts as a capable general-purpose spectrum analyzer and grows into specialized roles through software options — the instrument hardware is the same; the options unlock measurement modes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUTS1000-AMK (Advanced Measurement Kit)\u003c\/strong\u003e — adds channel power, adjacent channel power (ACP), occupied bandwidth (OBW), time-domain power, carrier-to-noise ratio (CNR), third-order intercept (TOI), and harmonic measurements (up to the 10th harmonic), plus a spectrogram display for time-history visualization\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUTS1000-AMA (Analog Demodulation)\u003c\/strong\u003e — AM and FM demodulation analysis with modulation rate, depth, and frequency offset measurements (20 Hz – 100 kHz modulation rate range)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUTS1000-VSA (Digital Demodulation)\u003c\/strong\u003e — ASK, FSK (2\/4\/8\/16-level), MSK\/GMSK, PSK (BPSK, QPSK, OQPSK, 8PSK), DPSK, and QAM (16\/32\/64\/128\/256) demodulation analysis with constellation, eye diagram, and EVM measurements\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUTS1000-EMI (EMI Pre-Compliance)\u003c\/strong\u003e — CISPR-aligned QP\/AVG\/PEAK detectors, EMI band sweep, and limit-line analysis. Pairs with the optional UTS-EMI01 near-field probe kit (3 mm to 10 cm probes) for board-level emission hunting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-uts1015b-1-5ghz-advanced-series-spectrum-analyzer-options-emi\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTS1000B-EMI.png\" alt=\"UNI-T UTS1015B EMI Pre-Compliance with UTS-EMI01 Probes\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eUNI-T UTS1015B EMI Pre-Compliance with UTS-EMI01 Probes\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch3\u003eBuilt for Working Lab Environments\u003c\/h3\u003e\n\u003cp\u003eA spectrum analyzer that lives next to soldering stations, drilling, and general bench work will breathe in dust over time. The UTS1015B addresses this with forced-air cooling and a \u003cstrong\u003euser-removable dust filter\u003c\/strong\u003e — pop it out, vacuum or blow it off, and slide it back. No tools, no service-center trip, no fan failures from dust accumulation. Operating range is 0 °C to +40 °C, storage to -20 °C \/ +70 °C, with full ±1 ppm timebase stability across the operational temperature range.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ca id=\"lb-uts1015b-1-5ghz-advanced-series-spectrum-analyzer-selectivity\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTS1000B-Selectivity.png\" alt=\"UNI-T UTS1015B Selectivity\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eUNI-T UTS1015B Selectivity\u003c\/span\u003e\n\u003c\/a\u003e\n\u003ca id=\"lb-uts1015b-1-5ghz-advanced-series-spectrum-analyzer-touch\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTS1000B-Touch.png\" alt=\"UNI-T UTS1015B Touch Interface\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eUNI-T UTS1015B Touch Interface\u003c\/span\u003e\n\u003c\/a\u003e\n\u003ca id=\"lb-uts1015b-1-5ghz-advanced-series-spectrum-analyzer-detector\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTS1000B-Detector.png\" alt=\"UNI-T UTS1015B Detector Modes\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eUNI-T UTS1015B Detector Modes\u003c\/span\u003e\n\u003c\/a\u003e\n\u003ca id=\"lb-uts1015b-1-5ghz-advanced-series-spectrum-analyzer-options-emi\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTS1000B-EMI.png\" alt=\"UNI-T UTS1015B EMI Pre-Compliance with UTS-EMI01 Probes\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eUNI-T UTS1015B EMI Pre-Compliance with UTS-EMI01 Probes\u003c\/span\u003e\n\u003c\/a\u003e\n\u003ch2\u003eApplications\u003c\/h2\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch3\u003eEducational and Training Labs\u003c\/h3\u003e\n\u003cp\u003eThe 10.1-inch multi-touch interface makes the UTS1015B unusually approachable for students learning RF for the first time. Cost-conscious purchasing for university and technical college labs gets a fully-featured spectrum analyzer with the same UI patterns students will encounter on more expensive instruments later. Curriculum fit: communications systems, radio engineering, electronics fundamentals, antenna theory, EMC introduction.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch3\u003eSub-GHz and FM Band Work\u003c\/h3\u003e\n\u003cp\u003eAt 1.5 GHz, the UTS1015B covers VHF\/UHF service bands, FM broadcast, aviation\/marine, sub-GHz ISM (315\/433\/868\/915 MHz), LoRa, Z-Wave, and 433\/915 MHz LPWAN. A natural fit for radio hobbyists, amateur (ham) radio operators, RF telemetry projects, and sub-GHz IoT device development. Step up to the UTS1032 variant if 2.4 GHz Wi-Fi or Bluetooth coverage matters.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch3\u003eEMI Pre-Compliance Investigation\u003c\/h3\u003e\n\u003cp\u003eCatch radiated and conducted emissions issues before sending boards to a full CISPR\/FCC compliance lab. With the UTS1000-EMI option plus the UTS-EMI01 near-field probe kit (3 mm to 10 cm probes, 30 MHz – 3 GHz), the UTS1015B becomes a board-level emission hunter — sweep with QP\/AVG\/PEAK detectors, overlay limit lines, and localize hot spots on the PCB before they cost you a failed compliance test.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch3\u003eRF Service, Repair, and Maintenance\u003c\/h3\u003e\n\u003cp\u003eA capable bench instrument for two-way radio shops, broadcast engineering, antenna service work, and field calibration support. Marker counter functions, harmonic measurements (with AMK), and the touch interface make routine service work quick — the same RF diagnostic toolkit a more expensive analyzer offers, in a more accessible package.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eAccessories and Family Options\u003c\/h2\u003e\n\u003ch3\u003eIncluded with Every Unit\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUTS1000B-series Spectrum Analyzer (instrument)\u003c\/li\u003e\n\u003cli\u003ePower cord\u003c\/li\u003e\n\u003cli\u003eUSB cable (UT-D04)\u003c\/li\u003e\n\u003cli\u003eEnglish download guide\u003c\/li\u003e\n\u003cli\u003eMulti-language safety manual\u003c\/li\u003e\n\u003cli\u003eFactory calibration certificate\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eRecommended Software Options\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/uts1000b-amk\"\u003eUTS1000-AMK\u003c\/a\u003e — Advanced Measurement Kit (channel power, ACP, OBW, TOI, harmonics, spectrogram)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/uts1000b-ama\"\u003eUTS1000-AMA\u003c\/a\u003e — Analog Demodulation (AM and FM)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/uts1000b-emi\"\u003eUTS1000-EMI\u003c\/a\u003e — EMI Pre-Compliance Software\u003c\/li\u003e\n\u003cli\u003eUTS1000-VSA — Digital Demodulation (ASK, FSK, MSK, PSK, DPSK, QAM)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eRecommended Accessories\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUTS-EMI01 near-field probe kit — four probes (30 MHz – 3 GHz, 3 mm to 10 cm resolution) for PCB-level emission hunting with the UTS1000-EMI option\u003c\/li\u003e\n\u003cli\u003eUT-CK01 accessories kit — SMA\/N adapters, cables, and antennas (824–960 MHz, 1710–1990 MHz, 2400–2500 MHz) for general RF setup\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/bag-b3-carry-bag\"\u003eBAG-B3 Carry Bag\u003c\/a\u003e — protective transport case sized for the UTS1000 series\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFamily Members\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUTS1015B\u003c\/strong\u003e — 1.5 GHz, no tracking generator — lowest entry point \u003cem\u003e(this product)\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/uts1015t-1-5ghz-advanced-series-spectrum-analyzer-with-tracking-generator\"\u003eUTS1015T\u003c\/a\u003e — 1.5 GHz with tracking generator\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/uts1032b-3-2ghz-advanced-series-spectrum-analyzer\"\u003eUTS1032B\u003c\/a\u003e — 3.2 GHz, no tracking generator\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/uts1032t-3-2ghz-advanced-series-spectrum-analyzer-with-tracking-generator\"\u003eUTS1032T\u003c\/a\u003e — 3.2 GHz with tracking generator\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eWhat's the DANL of the UTS1015B, and what does that mean for my measurements?\u003c\/p\u003e\n\u003cp\u003eThe UTS1015B reaches a typical displayed average noise level of \u003cstrong\u003e-161 dBm\/Hz\u003c\/strong\u003e with the preamp on in the 200 MHz – 1.5 GHz band, slightly higher (less sensitive) at the lowest and highest frequencies of its range. Practically: signals down around -120 dBm are visible above the noise floor with reasonable RBW settings (e.g., 1 kHz). For ultimate weak-signal work, narrow the RBW (each 10× reduction drops the noise floor by 10 dB) and enable averaging.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eCan I add a tracking generator to the UTS1015B later?\u003c\/p\u003e\n\u003cp\u003eNo — the tracking generator is integrated hardware on the T-variants (UTS1015T). If you anticipate needing scalar network measurements (filter sweeps, amplifier response, return loss), consider the UTS1015T instead. The B-model is the right choice when you're primarily doing spectrum analysis and don't need a tracking source.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eHow does the UTS1015B compare to the higher-end UTS3000T+ series?\u003c\/p\u003e\n\u003cp\u003eThe UTS1000B series is the entry tier — same modern touch UI and the same standard SCPI\/LAN interfaces, with -161 dBm DANL and \u0026lt;-98 dBc\/Hz phase noise. The UTS3000T+ Performance series steps up to -164 to -165 dBm DANL, adds features like a waterfall display, peak table, VSWR\/return loss measurements, and reflection analysis, and ships with the tracking generator integrated as standard. For an educational lab, RF hobbyist work, IoT\/wireless development, or EMI pre-compliance investigation, the UTS1000B series is well-matched at a much lower price point. For professional RF design work where measurement margin matters, look at the UTS3015T+ or UTS3032T+.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eWhat software options are available, and what do they add?\u003c\/p\u003e\n\u003cp\u003eFour software options expand the UTS1015B's measurement capabilities: \u003cstrong\u003eUTS1000-AMK\u003c\/strong\u003e (Advanced Measurement Kit) adds channel power, ACP, OBW, time-domain power, CNR, TOI, and harmonic measurements with a spectrogram display. \u003cstrong\u003eUTS1000-AMA\u003c\/strong\u003e adds AM\/FM analog demodulation analysis. \u003cstrong\u003eUTS1000-VSA\u003c\/strong\u003e adds digital demodulation for ASK, FSK, MSK, PSK, DPSK, and QAM signals up to 256-QAM. \u003cstrong\u003eUTS1000-EMI\u003c\/strong\u003e adds CISPR-aligned EMI pre-compliance with QP\/AVG\/PEAK detectors and limit-line support — it pairs with the optional UTS-EMI01 near-field probe kit for PCB-level emission localization.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eIs the UTS1015B suitable for automated test (ATE)?\u003c\/p\u003e\n\u003cp\u003eYes. The UTS1015B accepts standard SCPI commands over USB-Device (USB-B 2.0) and LAN VXI-11 (RJ-45). It drops into pyvisa, LabVIEW, NI-MAX, or any framework that talks to standard test instruments — no proprietary driver layer required beyond a USB or LAN connection. The full SCPI command set is documented in the UTS1000B Programming Manual.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003c\/div\u003e","brand":"UNI-T","offers":[{"title":"Default Title","offer_id":46699523309852,"sku":"181200100011X","price":888.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UTS1015B_Cables.jpg?v=1720807391"},{"product_id":"utg2062b","title":"UTG2062B 60MHz 2Ch Advanced-Series Arbitrary Waveform Generator","description":"\u003ch1\u003eUNI-T UTG2062B 60 MHz 2Ch Arbitrary Waveform Generator: 16-Bit Dual-Channel Bench Function Generator\u003c\/h1\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eUNI-T UTG2062B\u003c\/strong\u003e is a 60 MHz dual-channel arbitrary waveform generator built around a 16-bit DAC, 320 MSa\/s sample rate, and a 16 Mpts arbitrary-waveform memory depth. The Advanced-Series chassis adds LAN connectivity, a 10 MHz external reference clock input and output, and a wider modulation envelope — 13 analog and digital modulation types including QAM and the full BPSK \/ QPSK \/ OSK \/ DSB-AM set — on top of the Classic-Series feature set.\u003c\/p\u003e\n\u003cp\u003e25 MHz square \/ pulse output, 1 µHz frequency resolution across the full 60 MHz output range, harmonic distortion below 0.2%, a 6-bit hardware frequency counter (100 mHz to 200 MHz), and 160 built-in arbitrary waveforms. Sine, square, ramp, pulse, harmonic (up to 16th order), expression-defined, noise, DC, and arbitrary waveform shapes — with channel-coupling and channel-combination functions for dual-channel work that needs coordinated frequency, amplitude, or phase relationships.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cdiv class=\"product-key-features\"\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e60 MHz sine \/ 25 MHz square \u0026amp; pulse\u003c\/strong\u003e — dual-channel output with 1 µHz frequency resolution.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e16-bit vertical resolution, 320 MSa\/s sample rate\u003c\/strong\u003e — 65,536 amplitude levels; supports clean waveform reconstruction across the full output range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e16 Mpts arbitrary waveform memory\u003c\/strong\u003e — 4,000× the depth of typical 4 kpts entry-tier generators. Supports long-form arbitrary playback for protocol-stream emulation and complex stimulus.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e13 modulation types\u003c\/strong\u003e — AM, FM, PM, ASK, FSK, PSK, BPSK, QPSK, OSK, SUM, DSB-AM, QAM, PWM with internal and external source.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e160 built-in arbitrary waveforms\u003c\/strong\u003e — common shapes across measurement, communications, and physiological signal families. Custom waveforms editable in upper-computer software.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExpression output\u003c\/strong\u003e — mathematical expressions across 18 function types (trigonometric, exponential, logarithmic, polynomial, etc.) describe the output waveform directly without a precomputed sample buffer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChannel coupling and channel combination\u003c\/strong\u003e — frequency, amplitude, or phase changes on one channel auto-adjust the other; output of both channels can be summed for dual-tone and multi-frequency stimulus.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHarmonic output — built-in 16th-order generator\u003c\/strong\u003e — harmonic synthesis without external mixer. Useful for power-system harmonic stimulus.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLAN, USB-Device, USB-Host\u003c\/strong\u003e — SCPI control over LAN or USB, plus direct thumb-drive waveform upload via USB-Host.\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eUNI-T UTG2062B Details\u003c\/h2\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003e60 MHz Multi-Waveform Output\u003c\/h3\u003e\n\u003cp\u003eThe UTG2062B produces nine waveform shapes at up to 60 MHz top-end on both channels: sine, square, ramp, pulse, harmonic, noise, DC, expression-defined, and arbitrary. Square and pulse output extend to 25 MHz with adjustable rise \/ fall time (typical 13 ns at 1 Vpp, 50 Ω) and pulse-wave jitter below 150 ps. Output amplitude is 1 mVpp to 10 Vpp into 50 Ω (2 mVpp to 20 Vpp into high-Z) across the full output range.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-utg2062b-60mhz-2ch-advanced-series-arbitrary-waveform-generator-mwave\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTG2000B-120MHz.png\" alt=\"UTG2062B multi-waveform output up to 60 MHz\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eNine waveform shapes available on both channels with 60 MHz top-end sine and 25 MHz square \/ pulse output.\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-utg2062b-60mhz-2ch-advanced-series-arbitrary-waveform-generator-expr\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTG2000B-Expressions.png\" alt=\"UTG2062B expression-defined waveform output\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eMathematical expressions describe the output waveform directly — sine, exponential, logarithmic, polynomial, and 14 other function types can be combined.\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003ch3\u003eExpression Output\u003c\/h3\u003e\n\u003cp\u003eEighteen function types — trigonometric, exponential, logarithmic, polynomial, absolute-value, and others — can be combined in column-method expressions to define the output waveform directly, without precomputing a sample buffer. The expression engine renders the result at the generator's full sample-rate \/ vertical-resolution capability. Useful for academic and research work where the waveform definition is the experimental variable.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003e13 Modulation Types\u003c\/h3\u003e\n\u003cp\u003eAM, FM, PM, ASK, FSK, PSK, BPSK, QPSK, OSK, SUM, DSB-AM, QAM, and PWM with internal or external source. The full PSK \/ BPSK \/ QPSK \/ OSK set supports communications-class digital-modulation stimulus; SUM and DSB-AM extend into analog double-sideband work; QAM adds quadrature amplitude modulation across configurable constellation depths. Modulating source is internal (sine, square, ramp, noise, arbitrary) or external via the analog modulation input.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-utg2062b-60mhz-2ch-advanced-series-arbitrary-waveform-generator-mod\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTG2000B-Modulation.png\" alt=\"UTG2062B 13-type modulation menu\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eThirteen analog and digital modulation types, internal or external source.\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-utg2062b-60mhz-2ch-advanced-series-arbitrary-waveform-generator-arb\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTG2000B-Arb.png\" alt=\"UTG2062B 160 built-in arbitrary waveform library\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003e160 built-in waveforms covering measurement, communications, automotive, and physiological signal families.\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003ch3\u003e160 Built-in Arbitrary Waveforms\u003c\/h3\u003e\n\u003cp\u003eThe waveform library covers standard measurement shapes (Sinc, Gaussian, Lorentz, exponential rise \/ fall, etc.), communications stimulus (PRBS, multi-tone, ramp-modulated), automotive electrical waveforms (ignition, AC ripple, motor-back-EMF), and physiological signals (cardiac, respiratory). Up to 16 Mpts arbitrary-waveform memory per channel supports long-form custom stimulus uploaded via USB-Host or PC software.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eChannel Combination \u0026amp; Coupling\u003c\/h3\u003e\n\u003cp\u003eThe UTG2062B provides two channel-pairing modes. \u003cstrong\u003eChannel combination\u003c\/strong\u003e sums the two-channel outputs into a single output port for dual-tone, multi-frequency, or noise-plus-signal stimulus. \u003cstrong\u003eChannel coupling\u003c\/strong\u003e ties the channels parametrically — when frequency, amplitude, or phase is changed on one channel, the other auto-adjusts by the configured offset or ratio. Useful for differential signal generation and tracked sweep across a defined relationship.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-utg2062b-60mhz-2ch-advanced-series-arbitrary-waveform-generator-couple\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTG2000B-Coupling.png\" alt=\"UTG2062B channel combination and coupling\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eTwo channel-pairing modes: output summing (combination) and parametric tracking (coupling).\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-utg2062b-60mhz-2ch-advanced-series-arbitrary-waveform-generator-sweep\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTG2000B-Sweep.png\" alt=\"UTG2062B frequency sweep and harmonic output\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eLinear and logarithmic frequency sweep across the full 60 MHz output range plus 16th-order harmonic synthesis.\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003ch3\u003eFrequency Sweep \u0026amp; 16th-Order Harmonic Output\u003c\/h3\u003e\n\u003cp\u003eLinear and logarithmic frequency sweep modes cover the full 60 MHz output range with sweep time from 1 ms to 500 s. Internal, external, or manual trigger source. The built-in 16th-order harmonic generator synthesizes the fundamental plus harmonics 2 through 16 with adjustable amplitude and phase per order — useful for power-system harmonic stimulus, filter characterization, and academic harmonic-distortion teaching without an external mixer or summing amplifier.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eApplications\u003c\/h2\u003e\n\u003cp\u003eThe Advanced-Series envelope — 16 Mpts memory, LAN connectivity, 10 MHz reference In \/ Out, 13 modulation types, channel coupling — positions the UTG2000B family for benchtop work where the entry-tier doesn't reach but the elite-tier is over-specified.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommunications-stimulus development\u003c\/strong\u003e — BPSK, QPSK, OSK, QAM digital modulation; SUM and DSB-AM analog modulation. ASK \/ FSK \/ PSK with configurable hop rate and depth.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLong-form arbitrary playback\u003c\/strong\u003e — 16 Mpts memory holds extended protocol streams, sensor-emulation traces, and physiological waveforms that overflow a 4 kpts buffer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower-system harmonic testing\u003c\/strong\u003e — 16th-order harmonic generator drives filter, transformer, and meter harmonic-distortion characterization without external mixing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDifferential signal generation\u003c\/strong\u003e — channel coupling produces phase-tracked, amplitude-tracked, or frequency-tracked output pairs for differential-circuit stimulus.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomated test (ATE)\u003c\/strong\u003e — LAN-based SCPI control with 10 MHz reference clock In and Out for synchronized multi-instrument benches.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAcademic and research\u003c\/strong\u003e — expression-defined waveform output supports experimental designs where the waveform mathematics is the experimental variable.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eAccessories and Family Options\u003c\/h2\u003e\n\u003ch3\u003eIncluded with Every Unit\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePower cord conforming to destination country standard\u003c\/li\u003e\n\u003cli\u003eUSB cable (UT-D14)\u003c\/li\u003e\n\u003cli\u003eBNC-BNC cable (UT-L45)\u003c\/li\u003e\n\u003cli\u003eBNC-to-alligator clip cable (UT-L02)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFamily Members\u003c\/h3\u003e\n\u003cp\u003eThe UTG2000B Advanced-Series consists of three SKUs sharing the same chassis, sample rate, modulation set, burst modes, and 16-bit DAC:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUTG2062B\u003c\/strong\u003e — 60 MHz sine \/ 25 MHz square (this product)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUTG2082B\u003c\/strong\u003e — 80 MHz sine \/ 25 MHz square\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUTG2122B\u003c\/strong\u003e — 120 MHz sine \/ 30 MHz square\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eWhat waveform shapes are available, and how does the expression-output feature work?\u003c\/p\u003e\n\u003cp\u003eNine standard shapes: sine, square, ramp, pulse, harmonic, noise, DC, expression-defined, and arbitrary. Expression output describes the waveform mathematically — the user enters a function definition combining sine, exponential, logarithmic, polynomial, and other operations across 18 function types, and the UTG2062B renders the result at the full sample-rate \/ DAC resolution without a precomputed buffer. Useful when the waveform shape is the experimental variable rather than a fixed library entry.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eHow does channel combination differ from channel coupling?\u003c\/p\u003e\n\u003cp\u003eChannel combination sums the two-channel outputs into a single output port — useful for dual-tone, multi-frequency, or signal-plus-noise stimulus generated within a single waveform generator. Channel coupling ties the channels parametrically: when frequency, amplitude, or phase changes on one channel, the other auto-adjusts by the configured offset or ratio. Coupling preserves two independent output ports but synchronizes their parameters.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eWhat is the harmonic generator and when would I use it?\u003c\/p\u003e\n\u003cp\u003eThe harmonic generator synthesizes the fundamental output plus harmonics 2 through 16 (16th-order) with adjustable amplitude and phase per order. The output is a single composite waveform with the configured harmonic content — no external mixer or summing amplifier is needed. Common applications include power-system harmonic-distortion stimulus, filter characterization, and academic teaching of harmonic synthesis. The UTG2062B generates the fundamental anywhere within the 60 MHz output range, with harmonic content capped by the sample-rate and output-bandwidth limits.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eCan the UTG2000B series work in a multi-instrument synchronized bench?\u003c\/p\u003e\n\u003cp\u003eYes. The 10 MHz reference clock input accepts an external timebase from an oscilloscope, signal generator, or atomic clock; the 10 MHz reference clock output supplies the same to downstream instruments. LAN control via SCPI plus external trigger and modulation inputs round out the ATE integration story. All three SKUs in the series support the same connectivity envelope.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eHow much arbitrary-waveform memory does the UTG2000B have, and how is it loaded?\u003c\/p\u003e\n\u003cp\u003e16 Mpts per channel of arbitrary waveform memory. Custom waveforms are created in the upper-computer software (drawing tool, mathematical expression, or imported sample file) and uploaded to the instrument via LAN, USB-Device, or USB-Host. USB-Host accepts standard USB thumb drives directly — waveforms exported from the upper computer can be loaded into the instrument without a PC connection. 160 built-in waveforms cover the common measurement, communications, automotive, and physiological signal families.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\u003ca id=\"lb-utg2062b-60mhz-2ch-advanced-series-arbitrary-waveform-generator-mwave\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTG2000B-120MHz.png\" alt=\"UTG2062B multi-waveform output\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003e60 MHz top-end sine and 25 MHz square \/ pulse output across nine waveform shapes\u003c\/span\u003e\n\u003c\/a\u003e\n\u003ca id=\"lb-utg2062b-60mhz-2ch-advanced-series-arbitrary-waveform-generator-expr\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTG2000B-Expressions.png\" alt=\"UTG2062B expression output\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003e18 function types describe the output waveform mathematically — no precomputed sample buffer required\u003c\/span\u003e\n\u003c\/a\u003e\n\u003ca id=\"lb-utg2062b-60mhz-2ch-advanced-series-arbitrary-waveform-generator-mod\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTG2000B-Modulation.png\" alt=\"UTG2062B 13-type modulation\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eAM, FM, PM, ASK, FSK, PSK, BPSK, QPSK, OSK, SUM, DSB-AM, QAM, PWM — internal or external source\u003c\/span\u003e\n\u003c\/a\u003e\n\u003ca id=\"lb-utg2062b-60mhz-2ch-advanced-series-arbitrary-waveform-generator-arb\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTG2000B-Arb.png\" alt=\"UTG2062B 160 built-in arbitrary waveforms\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003e160 waveform library covering measurement, communications, automotive, and physiological signal families\u003c\/span\u003e\n\u003c\/a\u003e\n\u003ca id=\"lb-utg2062b-60mhz-2ch-advanced-series-arbitrary-waveform-generator-couple\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTG2000B-Coupling.png\" alt=\"UTG2062B channel combination and coupling\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eChannel combination sums outputs; channel coupling tracks frequency \/ amplitude \/ phase parametrically\u003c\/span\u003e\n\u003c\/a\u003e\n\u003ca id=\"lb-utg2062b-60mhz-2ch-advanced-series-arbitrary-waveform-generator-sweep\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTG2000B-Sweep.png\" alt=\"UTG2062B sweep and harmonic output\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eLinear and logarithmic sweep across 60 MHz plus 16th-order harmonic synthesis\u003c\/span\u003e\n\u003c\/a\u003e","brand":"UNI-T","offers":[{"title":"Default Title","offer_id":46699539497244,"sku":"181120080330X","price":415.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UTG2062B_Cables.jpg?v=1720807399"},{"product_id":"mso2202","title":"MSO2202 200 MHz 2+16Ch Mixed Signal Oscilloscope","description":"\u003ch1\u003eMSO2202 | 200 MHz 2+16Ch Mixed Signal Oscilloscope\u003c\/h1\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThe MSO2202 is a 200 MHz mixed signal oscilloscope with 2 analog channels and 16 digital channels (logic analyzer included). It samples at 2.0 GSa\/s with 56 Mpts memory depth and captures waveforms at up to 1,000,000 wfms\/s — one of the fastest capture rates in its class — on an 8-inch capacitive touchscreen.\u003c\/p\u003e\n\u003cp\u003eThe oscilloscope provides 36 automated measurements with statistics, advanced triggering (edge, pulse width, slope, video, pattern, and area trigger), FFT spectrum analysis, and web-based remote control via LAN. Serial bus protocol decoding for RS-232, UART, I²C, SPI, CAN, CAN-FD, LIN, and FlexRay is available as optional software licenses.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cdiv class=\"product-key-features\"\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e200 MHz Bandwidth, 2 Analog Channels\u003c\/strong\u003e — Two-channel capture at up to 200 MHz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2.0 GSa\/s Sample Rate\u003c\/strong\u003e — Captures fast edges and high-frequency content with accurate timing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e56 Mpts Memory Depth\u003c\/strong\u003e — Extended capture without reducing sample rate.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1,000,000 wfms\/s Capture Rate\u003c\/strong\u003e — High acquisition speed reveals rare glitches, runts, and timing violations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e16 Digital Channels Included\u003c\/strong\u003e — Mixed-signal debugging with time-correlated analog and digital views. Logic probe pod included.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e36 Automated Measurements\u003c\/strong\u003e — Time, voltage, frequency, and statistical measurements with real-time tracking.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eArea Trigger\u003c\/strong\u003e — Draw a region on screen to trigger on waveform anomalies.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFFT Spectrum Analysis\u003c\/strong\u003e — Frequency domain analysis for harmonics, EMI, and spectral characterization.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e8-Inch Capacitive Touchscreen\u003c\/strong\u003e — Pinch, zoom, and drag for efficient waveform navigation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeb Remote Control\u003c\/strong\u003e — Browser-based access from any device on the LAN.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnectivity\u003c\/strong\u003e — USB, LAN, VGA, EXT trigger, AUX output.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eMixed-Signal Debugging\u003c\/h3\u003e\n\u003cp\u003eThe 16 digital channels display alongside analog traces with full time correlation. See bus activity and analog behavior on the same time axis — critical for debugging embedded systems where a protocol command triggers an analog response. Logic probe pod included.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-mso2202-la\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO2000-LAScreen.png\" alt=\"MSO2000 16-channel logic analyzer\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003e16-channel logic analyzer correlated with analog traces\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-mso2202-la\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO2000-LAScreen.png\" alt=\"MSO2000 16-channel logic analyzer\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003e16-channel logic analyzer correlated with analog traces\u003c\/span\u003e\n\u003c\/a\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-mso2202-fft\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO2000-FFT.png\" alt=\"MSO2000 FFT spectrum analysis\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eFFT analysis for frequency domain signal characterization\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003ch3\u003eFFT Spectrum Analysis\u003c\/h3\u003e\n\u003cp\u003eThe built-in FFT converts time-domain waveforms to the frequency domain for identifying harmonics, EMI, clock spurs, and other spectral components. Combined with the 1,000,000 wfms\/s capture rate, this helps characterize both time and frequency behavior of complex signals.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-mso2202-fft\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO2000-FFT.png\" alt=\"MSO2000 FFT spectrum analysis\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eFFT analysis for frequency domain signal characterization\u003c\/span\u003e\n\u003c\/a\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eAdvanced Triggering\u003c\/h3\u003e\n\u003cp\u003eBeyond standard edge triggering, the MSO\/UPO2000 supports pulse width, slope, video, pattern, timeout, and area triggers. The area trigger lets you draw a region on screen and trigger when a waveform enters or exits it — effective for catching anomalies in signals where you know the expected shape.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-mso2202-trig\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO2000-Triggers.png\" alt=\"MSO2000 advanced trigger types\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eAdvanced trigger types for isolating specific signal conditions\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-mso2202-trig\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO2000-Triggers.png\" alt=\"MSO2000 advanced trigger types\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eAdvanced trigger types for isolating specific signal conditions\u003c\/span\u003e\n\u003c\/a\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-mso2202-mem\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO2000-Mem.png\" alt=\"MSO2000 56 Mpts memory depth\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003e56 Mpts memory depth for extended signal capture\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003ch3\u003eDeep Memory Capture\u003c\/h3\u003e\n\u003cp\u003eWith 56 Mpts of memory, the oscilloscope maintains high sample rates across wide time base settings. Capture complete communication sequences, power-on cycles, or slow mechanical processes without aliasing. Zoom into any portion of the record to examine details at full resolution.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-mso2202-mem\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO2000-Mem.png\" alt=\"MSO2000 56 Mpts memory depth\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003e56 Mpts memory depth for extended signal capture\u003c\/span\u003e\n\u003c\/a\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eApplications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEmbedded Systems Development\u003c\/strong\u003e — Debug firmware with time-correlated analog and digital views. Decode SPI, I²C, UART, and CAN bus traffic alongside power rails and clock signals.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Electronics\u003c\/strong\u003e — Capture switching waveforms with deep memory, trigger on specific conditions, and use FFT to characterize switching noise and harmonics.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEducation and Training\u003c\/strong\u003e — Touchscreen interface and automated measurements for teaching labs, with advanced features for upper-level coursework.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturing and Quality\u003c\/strong\u003e — Fast capture rate catches intermittent failures that slower scopes miss. Web remote control for rack-mounted setups.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eAre serial bus protocol decodes included?\u003c\/p\u003e\n\u003cp\u003eNo. Protocol decoding for RS-232, UART, I²C, SPI, CAN, CAN-FD, LIN, and FlexRay is available as optional software licenses. See the \u003ca href=\"\/collections\/mso-upo2000e\"\u003eMSO\/UPO2000 series page\u003c\/a\u003e for available decode options.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eWhat is the difference between MSO and UPO models?\u003c\/p\u003e\n\u003cp\u003eMSO models include the 16-channel logic probe pod. UPO models are the same oscilloscope without the logic pod — add it later with the \u003ca href=\"\/products\/ut-m15\"\u003eUT-M15\u003c\/a\u003e and \u003ca href=\"\/products\/upo2000-la16\"\u003eLA16 software license\u003c\/a\u003e. All other specifications are identical.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eWhat makes the 1,000,000 wfms\/s capture rate significant?\u003c\/p\u003e\n\u003cp\u003eA faster capture rate means the oscilloscope acquires more waveforms per second, increasing the probability of catching rare events like glitches, runts, or timing violations. At 1,000,000 wfms\/s, the MSO\/UPO2000 captures anomalies that scopes with 10,000–100,000 wfms\/s would likely miss.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003cp\u003ePart of the \u003ca href=\"\/collections\/mso-upo2000e\"\u003eMSO\/UPO2000 oscilloscope series\u003c\/a\u003e. All models share the same 2.0 GSa\/s sample rate, 56 Mpts memory, and 1,000,000 wfms\/s capture engine. See the \u003ca href=\"\/collections\/mso-upo2000e\"\u003eseries comparison table\u003c\/a\u003e to find the right combination of bandwidth, channels, and accessories.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"UNI-T","offers":[{"title":"Default Title","offer_id":46699593728284,"sku":"181100300038X","price":909.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/MSO2202_Probes.jpg?v=1742401597"},{"product_id":"mso2102-s","title":"MSO2102-S 100 MHz 2+16Ch Mixed Signal Oscilloscope with Signal Generator","description":"\u003ch1\u003eMSO2102-S | 100 MHz 2+16Ch Mixed Signal Oscilloscope with Signal Generator\u003c\/h1\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThe MSO2102 is a 100 MHz mixed signal oscilloscope with 2 analog channels and 16 digital channels (logic analyzer included). It samples at 2.0 GSa\/s with 56 Mpts memory depth and captures waveforms at up to 1,000,000 wfms\/s — one of the fastest capture rates in its class — on an 8-inch capacitive touchscreen. A built-in 50 MHz arbitrary waveform generator provides stimulus signals for closed-loop testing and enables Bode plot analysis.\u003c\/p\u003e\n\u003cp\u003eThe oscilloscope provides 36 automated measurements with statistics, advanced triggering (edge, pulse width, slope, video, pattern, and area trigger), FFT spectrum analysis, and web-based remote control via LAN. Serial bus protocol decoding for RS-232, UART, I²C, SPI, CAN, CAN-FD, LIN, and FlexRay is available as optional software licenses.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cdiv class=\"product-key-features\"\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e100 MHz Bandwidth, 2 Analog Channels\u003c\/strong\u003e — Two-channel capture at up to 100 MHz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2.0 GSa\/s Sample Rate\u003c\/strong\u003e — Captures fast edges and high-frequency content with accurate timing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e56 Mpts Memory Depth\u003c\/strong\u003e — Extended capture without reducing sample rate.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1,000,000 wfms\/s Capture Rate\u003c\/strong\u003e — High acquisition speed reveals rare glitches, runts, and timing violations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e16 Digital Channels Included\u003c\/strong\u003e — Mixed-signal debugging with time-correlated analog and digital views. Logic probe pod included.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt-In 50 MHz Signal Generator\u003c\/strong\u003e — Stimulus-response testing and Bode plot analysis without external equipment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e36 Automated Measurements\u003c\/strong\u003e — Time, voltage, frequency, and statistical measurements with real-time tracking.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eArea Trigger\u003c\/strong\u003e — Draw a region on screen to trigger on waveform anomalies.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFFT Spectrum Analysis\u003c\/strong\u003e — Frequency domain analysis for harmonics, EMI, and spectral characterization.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e8-Inch Capacitive Touchscreen\u003c\/strong\u003e — Pinch, zoom, and drag for efficient waveform navigation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeb Remote Control\u003c\/strong\u003e — Browser-based access from any device on the LAN.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnectivity\u003c\/strong\u003e — USB, LAN, VGA, EXT trigger, AUX output.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eBuilt-In Signal Generator\u003c\/h3\u003e\n\u003cp\u003eThe 50 MHz arbitrary waveform generator outputs sine, square, ramp, pulse, noise, and user-defined waveforms directly from the oscilloscope. Use it to inject test signals into a circuit and capture the response simultaneously — ideal for characterizing filters, amplifiers, and feedback loops without a separate signal source.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-mso2102s-awg\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO2000-AWG.png\" alt=\"MSO2000 built-in signal generator\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eBuilt-in 50 MHz arbitrary waveform generator\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-mso2102s-awg\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO2000-AWG.png\" alt=\"MSO2000 built-in signal generator\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eBuilt-in 50 MHz arbitrary waveform generator\u003c\/span\u003e\n\u003c\/a\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-mso2102s-bode\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO2000-Bode.png\" alt=\"MSO2000 Bode plot analysis\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eBode plot analysis for control loop characterization\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003ch3\u003eBode Plot for Loop Analysis\u003c\/h3\u003e\n\u003cp\u003eThe Bode plot function sweeps the built-in signal generator across a frequency range while measuring gain and phase. The result is a frequency response plot displayed directly on screen — essential for characterizing power supply feedback loops, verifying filter rolloff, and measuring amplifier bandwidth.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-mso2102s-bode\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO2000-Bode.png\" alt=\"MSO2000 Bode plot analysis\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eBode plot analysis for control loop characterization\u003c\/span\u003e\n\u003c\/a\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eMixed-Signal Debugging\u003c\/h3\u003e\n\u003cp\u003eThe 16 digital channels display alongside analog traces with full time correlation. See bus activity and analog behavior on the same time axis — critical for debugging embedded systems where a protocol command triggers an analog response. Logic probe pod included.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-mso2102s-la\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO2000-LAScreen.png\" alt=\"MSO2000 16-channel logic analyzer\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003e16-channel logic analyzer correlated with analog traces\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-mso2102s-la\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO2000-LAScreen.png\" alt=\"MSO2000 16-channel logic analyzer\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003e16-channel logic analyzer correlated with analog traces\u003c\/span\u003e\n\u003c\/a\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-mso2102s-fft\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO2000-FFT.png\" alt=\"MSO2000 FFT spectrum analysis\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eFFT analysis for frequency domain signal characterization\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003ch3\u003eFFT Spectrum Analysis\u003c\/h3\u003e\n\u003cp\u003eThe built-in FFT converts time-domain waveforms to the frequency domain for identifying harmonics, EMI, clock spurs, and other spectral components. Combined with the 1,000,000 wfms\/s capture rate, this helps characterize both time and frequency behavior of complex signals.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-mso2102s-fft\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO2000-FFT.png\" alt=\"MSO2000 FFT spectrum analysis\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eFFT analysis for frequency domain signal characterization\u003c\/span\u003e\n\u003c\/a\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eAdvanced Triggering\u003c\/h3\u003e\n\u003cp\u003eBeyond standard edge triggering, the MSO\/UPO2000 supports pulse width, slope, video, pattern, timeout, and area triggers. The area trigger lets you draw a region on screen and trigger when a waveform enters or exits it — effective for catching anomalies in signals where you know the expected shape.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-mso2102s-trig\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO2000-Triggers.png\" alt=\"MSO2000 advanced trigger types\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eAdvanced trigger types for isolating specific signal conditions\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-mso2102s-trig\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO2000-Triggers.png\" alt=\"MSO2000 advanced trigger types\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eAdvanced trigger types for isolating specific signal conditions\u003c\/span\u003e\n\u003c\/a\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eApplications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEmbedded Systems Development\u003c\/strong\u003e — Debug firmware with time-correlated analog and digital views. Decode SPI, I²C, UART, and CAN bus traffic alongside power rails and clock signals.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Electronics\u003c\/strong\u003e — Capture switching waveforms with deep memory, trigger on specific conditions, and use FFT to characterize switching noise and harmonics.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEducation and Training\u003c\/strong\u003e — Touchscreen interface and automated measurements for teaching labs, with advanced features for upper-level coursework.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturing and Quality\u003c\/strong\u003e — Fast capture rate catches intermittent failures that slower scopes miss. Web remote control for rack-mounted setups.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eAre serial bus protocol decodes included?\u003c\/p\u003e\n\u003cp\u003eNo. Protocol decoding for RS-232, UART, I²C, SPI, CAN, CAN-FD, LIN, and FlexRay is available as optional software licenses. See the \u003ca href=\"\/collections\/mso-upo2000e\"\u003eMSO\/UPO2000 series page\u003c\/a\u003e for available decode options.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eWhat waveforms can the built-in signal generator produce?\u003c\/p\u003e\n\u003cp\u003eThe -S models include a 50 MHz arbitrary waveform generator outputting sine, square, ramp, pulse, noise, DC, and user-defined waveforms. It also enables the Bode plot function for automated frequency response measurement.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eWhat is the difference between MSO and UPO models?\u003c\/p\u003e\n\u003cp\u003eMSO models include the 16-channel logic probe pod. UPO models are the same oscilloscope without the logic pod — add it later with the \u003ca href=\"\/products\/ut-m15\"\u003eUT-M15\u003c\/a\u003e and \u003ca href=\"\/products\/upo2000-la16\"\u003eLA16 software license\u003c\/a\u003e. All other specifications are identical.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eWhat makes the 1,000,000 wfms\/s capture rate significant?\u003c\/p\u003e\n\u003cp\u003eA faster capture rate means the oscilloscope acquires more waveforms per second, increasing the probability of catching rare events like glitches, runts, or timing violations. At 1,000,000 wfms\/s, the MSO\/UPO2000 captures anomalies that scopes with 10,000–100,000 wfms\/s would likely miss.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003cp\u003ePart of the \u003ca href=\"\/collections\/mso-upo2000e\"\u003eMSO\/UPO2000 oscilloscope series\u003c\/a\u003e. All models share the same 2.0 GSa\/s sample rate, 56 Mpts memory, and 1,000,000 wfms\/s capture engine. See the \u003ca href=\"\/collections\/mso-upo2000e\"\u003eseries comparison table\u003c\/a\u003e to find the right combination of bandwidth, channels, and accessories.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"UNI-T","offers":[{"title":"Default Title","offer_id":46699598053660,"sku":"181100300041X","price":881.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/MSO2102-S_Probes.jpg?v=1742401588"},{"product_id":"mso2102","title":"MSO2102 100 MHz 2+16Ch Mixed Signal Oscilloscope","description":"\u003ch1\u003eMSO2102 | 100 MHz 2+16Ch Mixed Signal Oscilloscope\u003c\/h1\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThe MSO2102 is a 100 MHz mixed signal oscilloscope with 2 analog channels and 16 digital channels (logic analyzer included). It samples at 2.0 GSa\/s with 56 Mpts memory depth and captures waveforms at up to 1,000,000 wfms\/s — one of the fastest capture rates in its class — on an 8-inch capacitive touchscreen.\u003c\/p\u003e\n\u003cp\u003eThe oscilloscope provides 36 automated measurements with statistics, advanced triggering (edge, pulse width, slope, video, pattern, and area trigger), FFT spectrum analysis, and web-based remote control via LAN. Serial bus protocol decoding for RS-232, UART, I²C, SPI, CAN, CAN-FD, LIN, and FlexRay is available as optional software licenses.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cdiv class=\"product-key-features\"\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e100 MHz Bandwidth, 2 Analog Channels\u003c\/strong\u003e — Two-channel capture at up to 100 MHz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2.0 GSa\/s Sample Rate\u003c\/strong\u003e — Captures fast edges and high-frequency content with accurate timing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e56 Mpts Memory Depth\u003c\/strong\u003e — Extended capture without reducing sample rate.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1,000,000 wfms\/s Capture Rate\u003c\/strong\u003e — High acquisition speed reveals rare glitches, runts, and timing violations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e16 Digital Channels Included\u003c\/strong\u003e — Mixed-signal debugging with time-correlated analog and digital views. Logic probe pod included.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e36 Automated Measurements\u003c\/strong\u003e — Time, voltage, frequency, and statistical measurements with real-time tracking.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eArea Trigger\u003c\/strong\u003e — Draw a region on screen to trigger on waveform anomalies.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFFT Spectrum Analysis\u003c\/strong\u003e — Frequency domain analysis for harmonics, EMI, and spectral characterization.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e8-Inch Capacitive Touchscreen\u003c\/strong\u003e — Pinch, zoom, and drag for efficient waveform navigation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeb Remote Control\u003c\/strong\u003e — Browser-based access from any device on the LAN.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnectivity\u003c\/strong\u003e — USB, LAN, VGA, EXT trigger, AUX output.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eMixed-Signal Debugging\u003c\/h3\u003e\n\u003cp\u003eThe 16 digital channels display alongside analog traces with full time correlation. See bus activity and analog behavior on the same time axis — critical for debugging embedded systems where a protocol command triggers an analog response. Logic probe pod included.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-mso2102-la\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO2000-LAScreen.png\" alt=\"MSO2000 16-channel logic analyzer\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003e16-channel logic analyzer correlated with analog traces\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-mso2102-la\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO2000-LAScreen.png\" alt=\"MSO2000 16-channel logic analyzer\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003e16-channel logic analyzer correlated with analog traces\u003c\/span\u003e\n\u003c\/a\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-mso2102-fft\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO2000-FFT.png\" alt=\"MSO2000 FFT spectrum analysis\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eFFT analysis for frequency domain signal characterization\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003ch3\u003eFFT Spectrum Analysis\u003c\/h3\u003e\n\u003cp\u003eThe built-in FFT converts time-domain waveforms to the frequency domain for identifying harmonics, EMI, clock spurs, and other spectral components. Combined with the 1,000,000 wfms\/s capture rate, this helps characterize both time and frequency behavior of complex signals.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-mso2102-fft\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO2000-FFT.png\" alt=\"MSO2000 FFT spectrum analysis\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eFFT analysis for frequency domain signal characterization\u003c\/span\u003e\n\u003c\/a\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eAdvanced Triggering\u003c\/h3\u003e\n\u003cp\u003eBeyond standard edge triggering, the MSO\/UPO2000 supports pulse width, slope, video, pattern, timeout, and area triggers. The area trigger lets you draw a region on screen and trigger when a waveform enters or exits it — effective for catching anomalies in signals where you know the expected shape.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-mso2102-trig\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO2000-Triggers.png\" alt=\"MSO2000 advanced trigger types\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eAdvanced trigger types for isolating specific signal conditions\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-mso2102-trig\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO2000-Triggers.png\" alt=\"MSO2000 advanced trigger types\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eAdvanced trigger types for isolating specific signal conditions\u003c\/span\u003e\n\u003c\/a\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-mso2102-mem\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO2000-Mem.png\" alt=\"MSO2000 56 Mpts memory depth\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003e56 Mpts memory depth for extended signal capture\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003ch3\u003eDeep Memory Capture\u003c\/h3\u003e\n\u003cp\u003eWith 56 Mpts of memory, the oscilloscope maintains high sample rates across wide time base settings. Capture complete communication sequences, power-on cycles, or slow mechanical processes without aliasing. Zoom into any portion of the record to examine details at full resolution.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-mso2102-mem\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO2000-Mem.png\" alt=\"MSO2000 56 Mpts memory depth\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003e56 Mpts memory depth for extended signal capture\u003c\/span\u003e\n\u003c\/a\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eApplications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEmbedded Systems Development\u003c\/strong\u003e — Debug firmware with time-correlated analog and digital views. Decode SPI, I²C, UART, and CAN bus traffic alongside power rails and clock signals.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Electronics\u003c\/strong\u003e — Capture switching waveforms with deep memory, trigger on specific conditions, and use FFT to characterize switching noise and harmonics.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEducation and Training\u003c\/strong\u003e — Touchscreen interface and automated measurements for teaching labs, with advanced features for upper-level coursework.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturing and Quality\u003c\/strong\u003e — Fast capture rate catches intermittent failures that slower scopes miss. Web remote control for rack-mounted setups.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eAre serial bus protocol decodes included?\u003c\/p\u003e\n\u003cp\u003eNo. Protocol decoding for RS-232, UART, I²C, SPI, CAN, CAN-FD, LIN, and FlexRay is available as optional software licenses. See the \u003ca href=\"\/collections\/mso-upo2000e\"\u003eMSO\/UPO2000 series page\u003c\/a\u003e for available decode options.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eWhat is the difference between MSO and UPO models?\u003c\/p\u003e\n\u003cp\u003eMSO models include the 16-channel logic probe pod. UPO models are the same oscilloscope without the logic pod — add it later with the \u003ca href=\"\/products\/ut-m15\"\u003eUT-M15\u003c\/a\u003e and \u003ca href=\"\/products\/upo2000-la16\"\u003eLA16 software license\u003c\/a\u003e. All other specifications are identical.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eWhat makes the 1,000,000 wfms\/s capture rate significant?\u003c\/p\u003e\n\u003cp\u003eA faster capture rate means the oscilloscope acquires more waveforms per second, increasing the probability of catching rare events like glitches, runts, or timing violations. At 1,000,000 wfms\/s, the MSO\/UPO2000 captures anomalies that scopes with 10,000–100,000 wfms\/s would likely miss.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003cp\u003ePart of the \u003ca href=\"\/collections\/mso-upo2000e\"\u003eMSO\/UPO2000 oscilloscope series\u003c\/a\u003e. All models share the same 2.0 GSa\/s sample rate, 56 Mpts memory, and 1,000,000 wfms\/s capture engine. See the \u003ca href=\"\/collections\/mso-upo2000e\"\u003eseries comparison table\u003c\/a\u003e to find the right combination of bandwidth, channels, and accessories.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"UNI-T","offers":[{"title":"Default Title","offer_id":46699600773404,"sku":"181100300042X","price":699.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/MSO2102_Probes.jpg?v=1744740909"},{"product_id":"upo2204","title":"UPO2204 200 MHz 4Ch Oscilloscope (Logic Pod Optional)","description":"\u003ch1\u003eUPO2204 | 200 MHz 4Ch Oscilloscope (Logic Pod Optional)\u003c\/h1\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThe UPO2204 is a 200 MHz mixed signal oscilloscope with 4 analog channels. Digital channels available via optional \u003ca href=\"\/products\/ut-m15\"\u003eUT-M15 logic probe pod\u003c\/a\u003e. It samples at 2.0 GSa\/s with 56 Mpts memory depth and captures waveforms at up to 1,000,000 wfms\/s — one of the fastest capture rates in its class — on an 8-inch capacitive touchscreen.\u003c\/p\u003e\n\u003cp\u003eThe oscilloscope provides 36 automated measurements with statistics, advanced triggering (edge, pulse width, slope, video, pattern, and area trigger), FFT spectrum analysis, and web-based remote control via LAN. Serial bus protocol decoding for RS-232, UART, I²C, SPI, CAN, CAN-FD, LIN, and FlexRay is available as optional software licenses.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cdiv class=\"product-key-features\"\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e200 MHz Bandwidth, 4 Analog Channels\u003c\/strong\u003e — Four-channel capture at up to 200 MHz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2.0 GSa\/s Sample Rate\u003c\/strong\u003e — Captures fast edges and high-frequency content with accurate timing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e56 Mpts Memory Depth\u003c\/strong\u003e — Extended capture without reducing sample rate.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1,000,000 wfms\/s Capture Rate\u003c\/strong\u003e — High acquisition speed reveals rare glitches, runts, and timing violations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e16 Digital Channels (Optional)\u003c\/strong\u003e — Add mixed-signal capability with the \u003ca href=\"\/products\/ut-m15\"\u003eUT-M15 logic probe pod\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e36 Automated Measurements\u003c\/strong\u003e — Time, voltage, frequency, and statistical measurements with real-time tracking.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eArea Trigger\u003c\/strong\u003e — Draw a region on screen to trigger on waveform anomalies.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFFT Spectrum Analysis\u003c\/strong\u003e — Frequency domain analysis for harmonics, EMI, and spectral characterization.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e8-Inch Capacitive Touchscreen\u003c\/strong\u003e — Pinch, zoom, and drag for efficient waveform navigation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeb Remote Control\u003c\/strong\u003e — Browser-based access from any device on the LAN.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnectivity\u003c\/strong\u003e — USB, LAN, VGA, EXT trigger, AUX output.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eDeep Memory for Extended Capture\u003c\/h3\u003e\n\u003cp\u003eWith 56 Mpts of memory, the oscilloscope maintains high sample rates across wide time base settings. Capture complete communication sequences, power-on cycles, or slow mechanical processes without aliasing. Zoom into any portion of the record at full resolution.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-upo2204-mem\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/UPO2000E-Memory.png\" alt=\"UPO2000E memory depth\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003e56 Mpts deep memory for extended signal capture\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-upo2204-mem\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/UPO2000E-Memory.png\" alt=\"UPO2000E memory depth\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003e56 Mpts deep memory for extended signal capture\u003c\/span\u003e\n\u003c\/a\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-upo2204-meas\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/UPO2000E-Measures.png\" alt=\"UPO2000E measurement functions\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eComprehensive measurement and analysis functions\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003ch3\u003eComprehensive Measurement and Analysis\u003c\/h3\u003e\n\u003cp\u003eThe oscilloscope provides 36 automated measurements covering time, voltage, frequency, and statistical parameters. Min\/max\/average\/standard deviation tracking runs in real time. The built-in FFT provides frequency domain analysis for identifying harmonics, EMI, and spectral components.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-upo2204-meas\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/UPO2000E-Measures.png\" alt=\"UPO2000E measurement functions\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eComprehensive measurement and analysis functions\u003c\/span\u003e\n\u003c\/a\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eOptional Mixed-Signal Capability\u003c\/h3\u003e\n\u003cp\u003eThe UPO2000 platform supports 16 digital channels via the optional \u003ca href=\"\/products\/ut-m15\"\u003eUT-M15 logic probe pod\u003c\/a\u003e. Once connected, digital channels display alongside analog traces with full time correlation — the same mixed-signal capability as the MSO models, added when you need it.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-upo2204-disp\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/UPO2000E-Display.png\" alt=\"UPO2000E display and interface\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eClear display with intuitive front-panel controls\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-upo2204-disp\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/UPO2000E-Display.png\" alt=\"UPO2000E display and interface\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eClear display with intuitive front-panel controls\u003c\/span\u003e\n\u003c\/a\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-upo2204-trig\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO2000-Triggers.png\" alt=\"MSO2000 advanced trigger types\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eAdvanced trigger types for isolating specific signal conditions\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003ch3\u003eAdvanced Triggering\u003c\/h3\u003e\n\u003cp\u003eBeyond standard edge triggering, the MSO\/UPO2000 supports pulse width, slope, video, pattern, timeout, and area triggers. The area trigger lets you draw a region on screen and trigger when a waveform enters or exits it — effective for catching anomalies where you know the expected signal shape.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-upo2204-trig\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO2000-Triggers.png\" alt=\"MSO2000 advanced trigger types\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eAdvanced trigger types for isolating specific signal conditions\u003c\/span\u003e\n\u003c\/a\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eApplications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEmbedded Systems Development\u003c\/strong\u003e — Debug firmware with time-correlated analog and digital views. Decode SPI, I²C, UART, and CAN bus traffic alongside power rails and clock signals.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Electronics\u003c\/strong\u003e — Capture switching waveforms with deep memory, trigger on specific conditions, and use FFT to characterize switching noise and harmonics.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-Channel Signal Analysis\u003c\/strong\u003e — Four analog channels for simultaneous capture of input, output, reference, and feedback signals.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEducation and Training\u003c\/strong\u003e — Touchscreen interface and automated measurements for teaching labs, with advanced features for upper-level coursework.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturing and Quality\u003c\/strong\u003e — Fast capture rate catches intermittent failures that slower scopes miss. Web remote control for rack-mounted setups.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eCan I add digital channels later?\u003c\/p\u003e\n\u003cp\u003eYes. The \u003ca href=\"\/products\/ut-m15\"\u003eUT-M15 logic probe pod\u003c\/a\u003e adds 16 digital channels. You also need the \u003ca href=\"\/products\/upo2000-la16\"\u003eUPO2000-LA16 software license\u003c\/a\u003e to enable the logic analyzer function.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eAre serial bus protocol decodes included?\u003c\/p\u003e\n\u003cp\u003eNo. Protocol decoding for RS-232, UART, I²C, SPI, CAN, CAN-FD, LIN, and FlexRay is available as optional software licenses. See the \u003ca href=\"\/collections\/mso-upo2000e\"\u003eMSO\/UPO2000 series page\u003c\/a\u003e for available decode options.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eWhat is the difference between MSO and UPO models?\u003c\/p\u003e\n\u003cp\u003eMSO models include the 16-channel logic probe pod. UPO models are the same oscilloscope without the logic pod — add it later with the \u003ca href=\"\/products\/ut-m15\"\u003eUT-M15\u003c\/a\u003e and \u003ca href=\"\/products\/upo2000-la16\"\u003eLA16 software license\u003c\/a\u003e. All other specifications are identical.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eWhat makes the 1,000,000 wfms\/s capture rate significant?\u003c\/p\u003e\n\u003cp\u003eA faster capture rate means the oscilloscope acquires more waveforms per second, increasing the probability of catching rare events like glitches, runts, or timing violations. At 1,000,000 wfms\/s, the MSO\/UPO2000 captures anomalies that scopes with 10,000–100,000 wfms\/s would likely miss.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003cp\u003ePart of the \u003ca href=\"\/collections\/mso-upo2000e\"\u003eMSO\/UPO2000 oscilloscope series\u003c\/a\u003e. All models share the same 2.0 GSa\/s sample rate, 56 Mpts memory, and 1,000,000 wfms\/s capture engine. See the \u003ca href=\"\/collections\/mso-upo2000e\"\u003eseries comparison table\u003c\/a\u003e to find the right combination of bandwidth, channels, and accessories.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"UNI-T","offers":[{"title":"Default Title","offer_id":46699608408348,"sku":"181100200044X","price":752.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UPO2204_Probes.jpg?v=1720807445"},{"product_id":"upo2202","title":"UPO2202 200 MHz 2Ch Oscilloscope (Logic Pod Optional)","description":"\u003ch1\u003eUPO2202 | 200 MHz 2Ch Oscilloscope (Logic Pod Optional)\u003c\/h1\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThe UPO2202 is a 200 MHz mixed signal oscilloscope with 2 analog channels. Digital channels available via optional \u003ca href=\"\/products\/ut-m15\"\u003eUT-M15 logic probe pod\u003c\/a\u003e. It samples at 2.0 GSa\/s with 56 Mpts memory depth and captures waveforms at up to 1,000,000 wfms\/s — one of the fastest capture rates in its class — on an 8-inch capacitive touchscreen.\u003c\/p\u003e\n\u003cp\u003eThe oscilloscope provides 36 automated measurements with statistics, advanced triggering (edge, pulse width, slope, video, pattern, and area trigger), FFT spectrum analysis, and web-based remote control via LAN. Serial bus protocol decoding for RS-232, UART, I²C, SPI, CAN, CAN-FD, LIN, and FlexRay is available as optional software licenses.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cdiv class=\"product-key-features\"\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e200 MHz Bandwidth, 2 Analog Channels\u003c\/strong\u003e — Two-channel capture at up to 200 MHz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2.0 GSa\/s Sample Rate\u003c\/strong\u003e — Captures fast edges and high-frequency content with accurate timing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e56 Mpts Memory Depth\u003c\/strong\u003e — Extended capture without reducing sample rate.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1,000,000 wfms\/s Capture Rate\u003c\/strong\u003e — High acquisition speed reveals rare glitches, runts, and timing violations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e16 Digital Channels (Optional)\u003c\/strong\u003e — Add mixed-signal capability with the \u003ca href=\"\/products\/ut-m15\"\u003eUT-M15 logic probe pod\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e36 Automated Measurements\u003c\/strong\u003e — Time, voltage, frequency, and statistical measurements with real-time tracking.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eArea Trigger\u003c\/strong\u003e — Draw a region on screen to trigger on waveform anomalies.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFFT Spectrum Analysis\u003c\/strong\u003e — Frequency domain analysis for harmonics, EMI, and spectral characterization.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e8-Inch Capacitive Touchscreen\u003c\/strong\u003e — Pinch, zoom, and drag for efficient waveform navigation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeb Remote Control\u003c\/strong\u003e — Browser-based access from any device on the LAN.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnectivity\u003c\/strong\u003e — USB, LAN, VGA, EXT trigger, AUX output.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eDeep Memory for Extended Capture\u003c\/h3\u003e\n\u003cp\u003eWith 56 Mpts of memory, the oscilloscope maintains high sample rates across wide time base settings. Capture complete communication sequences, power-on cycles, or slow mechanical processes without aliasing. Zoom into any portion of the record at full resolution.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-upo2202-mem\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/UPO2000E-Memory.png\" alt=\"UPO2000E memory depth\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003e56 Mpts deep memory for extended signal capture\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-upo2202-mem\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/UPO2000E-Memory.png\" alt=\"UPO2000E memory depth\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003e56 Mpts deep memory for extended signal capture\u003c\/span\u003e\n\u003c\/a\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-upo2202-meas\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/UPO2000E-Measures.png\" alt=\"UPO2000E measurement functions\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eComprehensive measurement and analysis functions\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003ch3\u003eComprehensive Measurement and Analysis\u003c\/h3\u003e\n\u003cp\u003eThe oscilloscope provides 36 automated measurements covering time, voltage, frequency, and statistical parameters. Min\/max\/average\/standard deviation tracking runs in real time. The built-in FFT provides frequency domain analysis for identifying harmonics, EMI, and spectral components.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-upo2202-meas\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/UPO2000E-Measures.png\" alt=\"UPO2000E measurement functions\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eComprehensive measurement and analysis functions\u003c\/span\u003e\n\u003c\/a\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eOptional Mixed-Signal Capability\u003c\/h3\u003e\n\u003cp\u003eThe UPO2000 platform supports 16 digital channels via the optional \u003ca href=\"\/products\/ut-m15\"\u003eUT-M15 logic probe pod\u003c\/a\u003e. Once connected, digital channels display alongside analog traces with full time correlation — the same mixed-signal capability as the MSO models, added when you need it.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-upo2202-disp\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/UPO2000E-Display.png\" alt=\"UPO2000E display and interface\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eClear display with intuitive front-panel controls\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-upo2202-disp\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/UPO2000E-Display.png\" alt=\"UPO2000E display and interface\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eClear display with intuitive front-panel controls\u003c\/span\u003e\n\u003c\/a\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-upo2202-trig\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO2000-Triggers.png\" alt=\"MSO2000 advanced trigger types\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eAdvanced trigger types for isolating specific signal conditions\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003ch3\u003eAdvanced Triggering\u003c\/h3\u003e\n\u003cp\u003eBeyond standard edge triggering, the MSO\/UPO2000 supports pulse width, slope, video, pattern, timeout, and area triggers. The area trigger lets you draw a region on screen and trigger when a waveform enters or exits it — effective for catching anomalies where you know the expected signal shape.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-upo2202-trig\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO2000-Triggers.png\" alt=\"MSO2000 advanced trigger types\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eAdvanced trigger types for isolating specific signal conditions\u003c\/span\u003e\n\u003c\/a\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eApplications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEmbedded Systems Development\u003c\/strong\u003e — Debug firmware with time-correlated analog and digital views. Decode SPI, I²C, UART, and CAN bus traffic alongside power rails and clock signals.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Electronics\u003c\/strong\u003e — Capture switching waveforms with deep memory, trigger on specific conditions, and use FFT to characterize switching noise and harmonics.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEducation and Training\u003c\/strong\u003e — Touchscreen interface and automated measurements for teaching labs, with advanced features for upper-level coursework.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturing and Quality\u003c\/strong\u003e — Fast capture rate catches intermittent failures that slower scopes miss. Web remote control for rack-mounted setups.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eCan I add digital channels later?\u003c\/p\u003e\n\u003cp\u003eYes. The \u003ca href=\"\/products\/ut-m15\"\u003eUT-M15 logic probe pod\u003c\/a\u003e adds 16 digital channels. You also need the \u003ca href=\"\/products\/upo2000-la16\"\u003eUPO2000-LA16 software license\u003c\/a\u003e to enable the logic analyzer function.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eAre serial bus protocol decodes included?\u003c\/p\u003e\n\u003cp\u003eNo. Protocol decoding for RS-232, UART, I²C, SPI, CAN, CAN-FD, LIN, and FlexRay is available as optional software licenses. See the \u003ca href=\"\/collections\/mso-upo2000e\"\u003eMSO\/UPO2000 series page\u003c\/a\u003e for available decode options.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eWhat is the difference between MSO and UPO models?\u003c\/p\u003e\n\u003cp\u003eMSO models include the 16-channel logic probe pod. UPO models are the same oscilloscope without the logic pod — add it later with the \u003ca href=\"\/products\/ut-m15\"\u003eUT-M15\u003c\/a\u003e and \u003ca href=\"\/products\/upo2000-la16\"\u003eLA16 software license\u003c\/a\u003e. All other specifications are identical.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eWhat makes the 1,000,000 wfms\/s capture rate significant?\u003c\/p\u003e\n\u003cp\u003eA faster capture rate means the oscilloscope acquires more waveforms per second, increasing the probability of catching rare events like glitches, runts, or timing violations. At 1,000,000 wfms\/s, the MSO\/UPO2000 captures anomalies that scopes with 10,000–100,000 wfms\/s would likely miss.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003cp\u003ePart of the \u003ca href=\"\/collections\/mso-upo2000e\"\u003eMSO\/UPO2000 oscilloscope series\u003c\/a\u003e. All models share the same 2.0 GSa\/s sample rate, 56 Mpts memory, and 1,000,000 wfms\/s capture engine. See the \u003ca href=\"\/collections\/mso-upo2000e\"\u003eseries comparison table\u003c\/a\u003e to find the right combination of bandwidth, channels, and accessories.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"UNI-T","offers":[{"title":"Default Title","offer_id":46699616829724,"sku":"181100200043X","price":556.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UPO2202_Probes.jpg?v=1720807454"},{"product_id":"upo2104","title":"UPO2104 100 MHz 4Ch Oscilloscope (Logic Pod Optional)","description":"\u003ch1\u003eUPO2104 | 100 MHz 4Ch Oscilloscope (Logic Pod Optional)\u003c\/h1\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThe UPO2104 is a 100 MHz mixed signal oscilloscope with 4 analog channels. Digital channels available via optional \u003ca href=\"\/products\/ut-m15\"\u003eUT-M15 logic probe pod\u003c\/a\u003e. It samples at 2.0 GSa\/s with 56 Mpts memory depth and captures waveforms at up to 1,000,000 wfms\/s — one of the fastest capture rates in its class — on an 8-inch capacitive touchscreen.\u003c\/p\u003e\n\u003cp\u003eThe oscilloscope provides 36 automated measurements with statistics, advanced triggering (edge, pulse width, slope, video, pattern, and area trigger), FFT spectrum analysis, and web-based remote control via LAN. Serial bus protocol decoding for RS-232, UART, I²C, SPI, CAN, CAN-FD, LIN, and FlexRay is available as optional software licenses.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cdiv class=\"product-key-features\"\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e100 MHz Bandwidth, 4 Analog Channels\u003c\/strong\u003e — Four-channel capture at up to 100 MHz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2.0 GSa\/s Sample Rate\u003c\/strong\u003e — Captures fast edges and high-frequency content with accurate timing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e56 Mpts Memory Depth\u003c\/strong\u003e — Extended capture without reducing sample rate.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1,000,000 wfms\/s Capture Rate\u003c\/strong\u003e — High acquisition speed reveals rare glitches, runts, and timing violations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e16 Digital Channels (Optional)\u003c\/strong\u003e — Add mixed-signal capability with the \u003ca href=\"\/products\/ut-m15\"\u003eUT-M15 logic probe pod\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e36 Automated Measurements\u003c\/strong\u003e — Time, voltage, frequency, and statistical measurements with real-time tracking.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eArea Trigger\u003c\/strong\u003e — Draw a region on screen to trigger on waveform anomalies.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFFT Spectrum Analysis\u003c\/strong\u003e — Frequency domain analysis for harmonics, EMI, and spectral characterization.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e8-Inch Capacitive Touchscreen\u003c\/strong\u003e — Pinch, zoom, and drag for efficient waveform navigation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeb Remote Control\u003c\/strong\u003e — Browser-based access from any device on the LAN.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnectivity\u003c\/strong\u003e — USB, LAN, VGA, EXT trigger, AUX output.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eDeep Memory for Extended Capture\u003c\/h3\u003e\n\u003cp\u003eWith 56 Mpts of memory, the oscilloscope maintains high sample rates across wide time base settings. Capture complete communication sequences, power-on cycles, or slow mechanical processes without aliasing. Zoom into any portion of the record at full resolution.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-upo2104-mem\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/UPO2000E-Memory.png\" alt=\"UPO2000E memory depth\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003e56 Mpts deep memory for extended signal capture\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-upo2104-mem\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/UPO2000E-Memory.png\" alt=\"UPO2000E memory depth\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003e56 Mpts deep memory for extended signal capture\u003c\/span\u003e\n\u003c\/a\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-upo2104-meas\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/UPO2000E-Measures.png\" alt=\"UPO2000E measurement functions\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eComprehensive measurement and analysis functions\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003ch3\u003eComprehensive Measurement and Analysis\u003c\/h3\u003e\n\u003cp\u003eThe oscilloscope provides 36 automated measurements covering time, voltage, frequency, and statistical parameters. Min\/max\/average\/standard deviation tracking runs in real time. The built-in FFT provides frequency domain analysis for identifying harmonics, EMI, and spectral components.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-upo2104-meas\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/UPO2000E-Measures.png\" alt=\"UPO2000E measurement functions\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eComprehensive measurement and analysis functions\u003c\/span\u003e\n\u003c\/a\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eOptional Mixed-Signal Capability\u003c\/h3\u003e\n\u003cp\u003eThe UPO2000 platform supports 16 digital channels via the optional \u003ca href=\"\/products\/ut-m15\"\u003eUT-M15 logic probe pod\u003c\/a\u003e. Once connected, digital channels display alongside analog traces with full time correlation — the same mixed-signal capability as the MSO models, added when you need it.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-upo2104-disp\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/UPO2000E-Display.png\" alt=\"UPO2000E display and interface\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eClear display with intuitive front-panel controls\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-upo2104-disp\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/UPO2000E-Display.png\" alt=\"UPO2000E display and interface\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eClear display with intuitive front-panel controls\u003c\/span\u003e\n\u003c\/a\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-upo2104-trig\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO2000-Triggers.png\" alt=\"MSO2000 advanced trigger types\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eAdvanced trigger types for isolating specific signal conditions\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003ch3\u003eAdvanced Triggering\u003c\/h3\u003e\n\u003cp\u003eBeyond standard edge triggering, the MSO\/UPO2000 supports pulse width, slope, video, pattern, timeout, and area triggers. The area trigger lets you draw a region on screen and trigger when a waveform enters or exits it — effective for catching anomalies where you know the expected signal shape.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-upo2104-trig\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO2000-Triggers.png\" alt=\"MSO2000 advanced trigger types\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eAdvanced trigger types for isolating specific signal conditions\u003c\/span\u003e\n\u003c\/a\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eApplications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEmbedded Systems Development\u003c\/strong\u003e — Debug firmware with time-correlated analog and digital views. Decode SPI, I²C, UART, and CAN bus traffic alongside power rails and clock signals.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Electronics\u003c\/strong\u003e — Capture switching waveforms with deep memory, trigger on specific conditions, and use FFT to characterize switching noise and harmonics.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-Channel Signal Analysis\u003c\/strong\u003e — Four analog channels for simultaneous capture of input, output, reference, and feedback signals.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEducation and Training\u003c\/strong\u003e — Touchscreen interface and automated measurements for teaching labs, with advanced features for upper-level coursework.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturing and Quality\u003c\/strong\u003e — Fast capture rate catches intermittent failures that slower scopes miss. Web remote control for rack-mounted setups.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eCan I add digital channels later?\u003c\/p\u003e\n\u003cp\u003eYes. The \u003ca href=\"\/products\/ut-m15\"\u003eUT-M15 logic probe pod\u003c\/a\u003e adds 16 digital channels. You also need the \u003ca href=\"\/products\/upo2000-la16\"\u003eUPO2000-LA16 software license\u003c\/a\u003e to enable the logic analyzer function.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eAre serial bus protocol decodes included?\u003c\/p\u003e\n\u003cp\u003eNo. Protocol decoding for RS-232, UART, I²C, SPI, CAN, CAN-FD, LIN, and FlexRay is available as optional software licenses. See the \u003ca href=\"\/collections\/mso-upo2000e\"\u003eMSO\/UPO2000 series page\u003c\/a\u003e for available decode options.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eWhat is the difference between MSO and UPO models?\u003c\/p\u003e\n\u003cp\u003eMSO models include the 16-channel logic probe pod. UPO models are the same oscilloscope without the logic pod — add it later with the \u003ca href=\"\/products\/ut-m15\"\u003eUT-M15\u003c\/a\u003e and \u003ca href=\"\/products\/upo2000-la16\"\u003eLA16 software license\u003c\/a\u003e. All other specifications are identical.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eWhat makes the 1,000,000 wfms\/s capture rate significant?\u003c\/p\u003e\n\u003cp\u003eA faster capture rate means the oscilloscope acquires more waveforms per second, increasing the probability of catching rare events like glitches, runts, or timing violations. At 1,000,000 wfms\/s, the MSO\/UPO2000 captures anomalies that scopes with 10,000–100,000 wfms\/s would likely miss.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003cp\u003ePart of the \u003ca href=\"\/collections\/mso-upo2000e\"\u003eMSO\/UPO2000 oscilloscope series\u003c\/a\u003e. All models share the same 2.0 GSa\/s sample rate, 56 Mpts memory, and 1,000,000 wfms\/s capture engine. See the \u003ca href=\"\/collections\/mso-upo2000e\"\u003eseries comparison table\u003c\/a\u003e to find the right combination of bandwidth, channels, and accessories.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"UNI-T","offers":[{"title":"Default Title","offer_id":46699625644316,"sku":"181100200042X","price":692.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UPO2104_Probes.jpg?v=1720807463"},{"product_id":"upo2102","title":"UPO2102 100 MHz 2Ch Oscilloscope (Logic Pod Optional)","description":"\u003ch1\u003eUPO2102 | 100 MHz 2Ch Oscilloscope (Logic Pod Optional)\u003c\/h1\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThe UPO2102 is a 100 MHz mixed signal oscilloscope with 2 analog channels. Digital channels available via optional \u003ca href=\"\/products\/ut-m15\"\u003eUT-M15 logic probe pod\u003c\/a\u003e. It samples at 2.0 GSa\/s with 56 Mpts memory depth and captures waveforms at up to 1,000,000 wfms\/s — one of the fastest capture rates in its class — on an 8-inch capacitive touchscreen.\u003c\/p\u003e\n\u003cp\u003eThe oscilloscope provides 36 automated measurements with statistics, advanced triggering (edge, pulse width, slope, video, pattern, and area trigger), FFT spectrum analysis, and web-based remote control via LAN. Serial bus protocol decoding for RS-232, UART, I²C, SPI, CAN, CAN-FD, LIN, and FlexRay is available as optional software licenses.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cdiv class=\"product-key-features\"\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e100 MHz Bandwidth, 2 Analog Channels\u003c\/strong\u003e — Two-channel capture at up to 100 MHz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2.0 GSa\/s Sample Rate\u003c\/strong\u003e — Captures fast edges and high-frequency content with accurate timing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e56 Mpts Memory Depth\u003c\/strong\u003e — Extended capture without reducing sample rate.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1,000,000 wfms\/s Capture Rate\u003c\/strong\u003e — High acquisition speed reveals rare glitches, runts, and timing violations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e16 Digital Channels (Optional)\u003c\/strong\u003e — Add mixed-signal capability with the \u003ca href=\"\/products\/ut-m15\"\u003eUT-M15 logic probe pod\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e36 Automated Measurements\u003c\/strong\u003e — Time, voltage, frequency, and statistical measurements with real-time tracking.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eArea Trigger\u003c\/strong\u003e — Draw a region on screen to trigger on waveform anomalies.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFFT Spectrum Analysis\u003c\/strong\u003e — Frequency domain analysis for harmonics, EMI, and spectral characterization.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e8-Inch Capacitive Touchscreen\u003c\/strong\u003e — Pinch, zoom, and drag for efficient waveform navigation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeb Remote Control\u003c\/strong\u003e — Browser-based access from any device on the LAN.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnectivity\u003c\/strong\u003e — USB, LAN, VGA, EXT trigger, AUX output.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eDeep Memory for Extended Capture\u003c\/h3\u003e\n\u003cp\u003eWith 56 Mpts of memory, the oscilloscope maintains high sample rates across wide time base settings. Capture complete communication sequences, power-on cycles, or slow mechanical processes without aliasing. Zoom into any portion of the record at full resolution.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-upo2102-mem\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/UPO2000E-Memory.png\" alt=\"UPO2000E memory depth\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003e56 Mpts deep memory for extended signal capture\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-upo2102-mem\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/UPO2000E-Memory.png\" alt=\"UPO2000E memory depth\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003e56 Mpts deep memory for extended signal capture\u003c\/span\u003e\n\u003c\/a\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-upo2102-meas\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/UPO2000E-Measures.png\" alt=\"UPO2000E measurement functions\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eComprehensive measurement and analysis functions\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003ch3\u003eComprehensive Measurement and Analysis\u003c\/h3\u003e\n\u003cp\u003eThe oscilloscope provides 36 automated measurements covering time, voltage, frequency, and statistical parameters. Min\/max\/average\/standard deviation tracking runs in real time. The built-in FFT provides frequency domain analysis for identifying harmonics, EMI, and spectral components.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-upo2102-meas\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/UPO2000E-Measures.png\" alt=\"UPO2000E measurement functions\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eComprehensive measurement and analysis functions\u003c\/span\u003e\n\u003c\/a\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eOptional Mixed-Signal Capability\u003c\/h3\u003e\n\u003cp\u003eThe UPO2000 platform supports 16 digital channels via the optional \u003ca href=\"\/products\/ut-m15\"\u003eUT-M15 logic probe pod\u003c\/a\u003e. Once connected, digital channels display alongside analog traces with full time correlation — the same mixed-signal capability as the MSO models, added when you need it.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-upo2102-disp\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/UPO2000E-Display.png\" alt=\"UPO2000E display and interface\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eClear display with intuitive front-panel controls\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-upo2102-disp\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/UPO2000E-Display.png\" alt=\"UPO2000E display and interface\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eClear display with intuitive front-panel controls\u003c\/span\u003e\n\u003c\/a\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-upo2102-trig\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO2000-Triggers.png\" alt=\"MSO2000 advanced trigger types\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eAdvanced trigger types for isolating specific signal conditions\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003ch3\u003eAdvanced Triggering\u003c\/h3\u003e\n\u003cp\u003eBeyond standard edge triggering, the MSO\/UPO2000 supports pulse width, slope, video, pattern, timeout, and area triggers. The area trigger lets you draw a region on screen and trigger when a waveform enters or exits it — effective for catching anomalies where you know the expected signal shape.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-upo2102-trig\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO2000-Triggers.png\" alt=\"MSO2000 advanced trigger types\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eAdvanced trigger types for isolating specific signal conditions\u003c\/span\u003e\n\u003c\/a\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eApplications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEmbedded Systems Development\u003c\/strong\u003e — Debug firmware with time-correlated analog and digital views. Decode SPI, I²C, UART, and CAN bus traffic alongside power rails and clock signals.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Electronics\u003c\/strong\u003e — Capture switching waveforms with deep memory, trigger on specific conditions, and use FFT to characterize switching noise and harmonics.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEducation and Training\u003c\/strong\u003e — Touchscreen interface and automated measurements for teaching labs, with advanced features for upper-level coursework.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturing and Quality\u003c\/strong\u003e — Fast capture rate catches intermittent failures that slower scopes miss. Web remote control for rack-mounted setups.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eCan I add digital channels later?\u003c\/p\u003e\n\u003cp\u003eYes. The \u003ca href=\"\/products\/ut-m15\"\u003eUT-M15 logic probe pod\u003c\/a\u003e adds 16 digital channels. You also need the \u003ca href=\"\/products\/upo2000-la16\"\u003eUPO2000-LA16 software license\u003c\/a\u003e to enable the logic analyzer function.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eAre serial bus protocol decodes included?\u003c\/p\u003e\n\u003cp\u003eNo. Protocol decoding for RS-232, UART, I²C, SPI, CAN, CAN-FD, LIN, and FlexRay is available as optional software licenses. See the \u003ca href=\"\/collections\/mso-upo2000e\"\u003eMSO\/UPO2000 series page\u003c\/a\u003e for available decode options.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eWhat is the difference between MSO and UPO models?\u003c\/p\u003e\n\u003cp\u003eMSO models include the 16-channel logic probe pod. UPO models are the same oscilloscope without the logic pod — add it later with the \u003ca href=\"\/products\/ut-m15\"\u003eUT-M15\u003c\/a\u003e and \u003ca href=\"\/products\/upo2000-la16\"\u003eLA16 software license\u003c\/a\u003e. All other specifications are identical.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eWhat makes the 1,000,000 wfms\/s capture rate significant?\u003c\/p\u003e\n\u003cp\u003eA faster capture rate means the oscilloscope acquires more waveforms per second, increasing the probability of catching rare events like glitches, runts, or timing violations. At 1,000,000 wfms\/s, the MSO\/UPO2000 captures anomalies that scopes with 10,000–100,000 wfms\/s would likely miss.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003cp\u003ePart of the \u003ca href=\"\/collections\/mso-upo2000e\"\u003eMSO\/UPO2000 oscilloscope series\u003c\/a\u003e. All models share the same 2.0 GSa\/s sample rate, 56 Mpts memory, and 1,000,000 wfms\/s capture engine. See the \u003ca href=\"\/collections\/mso-upo2000e\"\u003eseries comparison table\u003c\/a\u003e to find the right combination of bandwidth, channels, and accessories.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"UNI-T","offers":[{"title":"Default Title","offer_id":46699629642012,"sku":"181100200045X","price":542.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UPO2102_Probes.jpg?v=1720807474"},{"product_id":"utd2202cexplus","title":"UTD2202CEX+ 200 MHz 2Ch Digital Storage Oscilloscope","description":"\u003ch1\u003eUTD2202CEX+ | 200 MHz 2Ch Digital Storage Oscilloscope\u003c\/h1\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThe UTD2202CEX+ is a 200 MHz 2-channel digital storage oscilloscope with 1.0 GSa\/s sample rate, 64 kpts memory depth, and a 7-inch display. It is a compact, affordable bench oscilloscope for basic electronics testing, education, and field service — providing reliable waveform capture and measurement without the feature complexity or cost of higher-end instruments.\u003c\/p\u003e\n\u003cp\u003eThe oscilloscope provides automated measurements for common waveform parameters, cursor measurements for manual analysis, math functions (addition, subtraction, FFT), and edge\/pulse width\/video triggering. USB connectivity supports data transfer and screenshot capture.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cdiv class=\"product-key-features\"\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e200 MHz Bandwidth, 2 Channels\u003c\/strong\u003e — Two-channel capture at up to 200 MHz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1.0 GSa\/s Sample Rate\u003c\/strong\u003e — Full-speed sampling for accurate waveform capture.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e64 kpts Memory Depth\u003c\/strong\u003e — Extended capture depth for the instrument class.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e7-Inch Display\u003c\/strong\u003e — Clear waveform display with measurement readouts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomated Measurements\u003c\/strong\u003e — Frequency, period, rise time, fall time, amplitude, duty cycle, and more.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMath Functions\u003c\/strong\u003e — Addition, subtraction, and FFT for basic waveform analysis.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMultiple Trigger Types\u003c\/strong\u003e — Edge, pulse width, and video triggering.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB Connectivity\u003c\/strong\u003e — Data transfer and screenshot export.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eCursor Measurements and Analysis\u003c\/h3\u003e\n\u003cp\u003eBuilt-in cursor measurements let you read time, voltage, and frequency values directly from the waveform display. Combined with automated measurements for rise time, fall time, frequency, period, duty cycle, and amplitude, the UTD2000CEX+ covers the essential characterization needs for general electronics work.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-utd2202cex-multi\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/UTD2000CEX-Multi.png\" alt=\"UTD2000CEX+ multi-function display\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eMulti-function display with cursor measurements\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-utd2202cex-multi\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/UTD2000CEX-Multi.png\" alt=\"UTD2000CEX+ multi-function display\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eMulti-function display with cursor measurements\u003c\/span\u003e\n\u003c\/a\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-utd2202cex-range\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/UTD2000CEX-Range.png\" alt=\"UTD2000CEX+ bandwidth and sampling\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eFull bandwidth with high-speed sampling\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003ch3\u003eFull Bandwidth Sampling\u003c\/h3\u003e\n\u003cp\u003eThe 1.0 GSa\/s sample rate provides accurate waveform capture across the full 200 MHz bandwidth. Edge triggering, pulse width triggering, and video triggering help isolate the signals of interest in busy circuits.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-utd2202cex-range\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/UTD2000CEX-Range.png\" alt=\"UTD2000CEX+ bandwidth and sampling\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eFull bandwidth with high-speed sampling\u003c\/span\u003e\n\u003c\/a\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eApplications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eElectronics Education\u003c\/strong\u003e — Affordable and straightforward for teaching basic oscilloscope operation, signal measurement, and circuit analysis.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHobbyist and Maker Projects\u003c\/strong\u003e — Debug Arduino, Raspberry Pi, and other microcontroller circuits with reliable waveform capture.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eField Service and Repair\u003c\/strong\u003e — Compact and portable for on-site diagnostics of electronic and electrical equipment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBasic R\u0026amp;D Prototyping\u003c\/strong\u003e — Verify signal timing, check power supply behavior, and characterize basic circuit performance during development.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eWhat is the difference between the CEX+ and CL+ models?\u003c\/p\u003e\n\u003cp\u003eThe CEX+ models have a 1.0 GSa\/s sample rate (twice the CL+), which provides better waveform fidelity at higher frequencies. The CL+ models offer 500 MSa\/s at a lower price point. Both share the same 7-inch display, trigger types, and measurement functions.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eDoes the UTD2000 series support protocol decoding?\u003c\/p\u003e\n\u003cp\u003eNo. The UTD2000 series is designed for basic analog waveform measurement. For serial bus decoding, see the \u003ca href=\"\/collections\/mso-upo2000e\"\u003eMSO\/UPO2000\u003c\/a\u003e or \u003ca href=\"\/collections\/upo1000\"\u003eUPO1000\u003c\/a\u003e series.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eCan I save waveforms and screenshots?\u003c\/p\u003e\n\u003cp\u003eYes. The USB interface supports saving waveform data and screenshots to a connected PC for documentation and further analysis.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003cp\u003eThe UTD2000 economy oscilloscope series includes the CEX+ models (\u003ca href=\"\/products\/utd2202cex-200mhz-2ch-dso-7in-screen-64kpts-memory\"\u003eUTD2202CEX+ (200 MHz)\u003c\/a\u003e, \u003ca href=\"\/products\/utd2102cex-100mhz-2ch-dso-7in-screen-64kpts-memory\"\u003eUTD2102CEX+ (100 MHz)\u003c\/a\u003e, \u003ca href=\"\/products\/utd2052cex-50mhz-2ch-dso-7in-screen-25kpts-memory\"\u003eUTD2052CEX+ (50 MHz)\u003c\/a\u003e) with 1.0 GSa\/s sample rate, and the CL+ models (\u003ca href=\"\/products\/utd2102cl-100mhz-2ch-dso-500msa-s-64kpts-memory-7in-screen\"\u003eUTD2102CL+ (100 MHz)\u003c\/a\u003e, \u003ca href=\"\/products\/utd2052cl-50mhz-2ch-dso-500msa-s-64kpts-memory-7in-screen\"\u003eUTD2052CL+ (50 MHz)\u003c\/a\u003e) with 500 MSa\/s. For more advanced features including deep memory, touchscreen, and protocol decoding, see the \u003ca href=\"\/collections\/upo1000\"\u003eUPO1000 series\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"UNI-T","offers":[{"title":"Default Title","offer_id":46699743314204,"sku":"181100100030X","price":239.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UTD2202CEX__Probes.jpg?v=1720807500"},{"product_id":"utd2102cexplus","title":"UTD2102CEX+ 100 MHz 2Ch Digital Storage Oscilloscope","description":"\u003ch1\u003eUTD2102CEX+ | 100 MHz 2Ch Digital Storage Oscilloscope\u003c\/h1\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThe UTD2102CEX+ is a 100 MHz 2-channel digital storage oscilloscope with 1.0 GSa\/s sample rate, 64 kpts memory depth, and a 7-inch display. It is a compact, affordable bench oscilloscope for basic electronics testing, education, and field service — providing reliable waveform capture and measurement without the feature complexity or cost of higher-end instruments.\u003c\/p\u003e\n\u003cp\u003eThe oscilloscope provides automated measurements for common waveform parameters, cursor measurements for manual analysis, math functions (addition, subtraction, FFT), and edge\/pulse width\/video triggering. USB connectivity supports data transfer and screenshot capture.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cdiv class=\"product-key-features\"\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e100 MHz Bandwidth, 2 Channels\u003c\/strong\u003e — Two-channel capture at up to 100 MHz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1.0 GSa\/s Sample Rate\u003c\/strong\u003e — Full-speed sampling for accurate waveform capture.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e64 kpts Memory Depth\u003c\/strong\u003e — Extended capture depth for the instrument class.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e7-Inch Display\u003c\/strong\u003e — Clear waveform display with measurement readouts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomated Measurements\u003c\/strong\u003e — Frequency, period, rise time, fall time, amplitude, duty cycle, and more.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMath Functions\u003c\/strong\u003e — Addition, subtraction, and FFT for basic waveform analysis.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMultiple Trigger Types\u003c\/strong\u003e — Edge, pulse width, and video triggering.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB Connectivity\u003c\/strong\u003e — Data transfer and screenshot export.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eCursor Measurements and Analysis\u003c\/h3\u003e\n\u003cp\u003eBuilt-in cursor measurements let you read time, voltage, and frequency values directly from the waveform display. Combined with automated measurements for rise time, fall time, frequency, period, duty cycle, and amplitude, the UTD2000CEX+ covers the essential characterization needs for general electronics work.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-utd2102cex-multi\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/UTD2000CEX-Multi.png\" alt=\"UTD2000CEX+ multi-function display\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eMulti-function display with cursor measurements\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-utd2102cex-multi\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/UTD2000CEX-Multi.png\" alt=\"UTD2000CEX+ multi-function display\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eMulti-function display with cursor measurements\u003c\/span\u003e\n\u003c\/a\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-utd2102cex-range\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/UTD2000CEX-Range.png\" alt=\"UTD2000CEX+ bandwidth and sampling\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eFull bandwidth with high-speed sampling\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003ch3\u003eFull Bandwidth Sampling\u003c\/h3\u003e\n\u003cp\u003eThe 1.0 GSa\/s sample rate provides accurate waveform capture across the full 100 MHz bandwidth. Edge triggering, pulse width triggering, and video triggering help isolate the signals of interest in busy circuits.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-utd2102cex-range\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/UTD2000CEX-Range.png\" alt=\"UTD2000CEX+ bandwidth and sampling\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eFull bandwidth with high-speed sampling\u003c\/span\u003e\n\u003c\/a\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eApplications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eElectronics Education\u003c\/strong\u003e — Affordable and straightforward for teaching basic oscilloscope operation, signal measurement, and circuit analysis.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHobbyist and Maker Projects\u003c\/strong\u003e — Debug Arduino, Raspberry Pi, and other microcontroller circuits with reliable waveform capture.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eField Service and Repair\u003c\/strong\u003e — Compact and portable for on-site diagnostics of electronic and electrical equipment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBasic R\u0026amp;D Prototyping\u003c\/strong\u003e — Verify signal timing, check power supply behavior, and characterize basic circuit performance during development.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eWhat is the difference between the CEX+ and CL+ models?\u003c\/p\u003e\n\u003cp\u003eThe CEX+ models have a 1.0 GSa\/s sample rate (twice the CL+), which provides better waveform fidelity at higher frequencies. The CL+ models offer 500 MSa\/s at a lower price point. Both share the same 7-inch display, trigger types, and measurement functions.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eDoes the UTD2000 series support protocol decoding?\u003c\/p\u003e\n\u003cp\u003eNo. The UTD2000 series is designed for basic analog waveform measurement. For serial bus decoding, see the \u003ca href=\"\/collections\/mso-upo2000e\"\u003eMSO\/UPO2000\u003c\/a\u003e or \u003ca href=\"\/collections\/upo1000\"\u003eUPO1000\u003c\/a\u003e series.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eCan I save waveforms and screenshots?\u003c\/p\u003e\n\u003cp\u003eYes. The USB interface supports saving waveform data and screenshots to a connected PC for documentation and further analysis.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003cp\u003eThe UTD2000 economy oscilloscope series includes the CEX+ models (\u003ca href=\"\/products\/utd2202cex-200mhz-2ch-dso-7in-screen-64kpts-memory\"\u003eUTD2202CEX+ (200 MHz)\u003c\/a\u003e, \u003ca href=\"\/products\/utd2102cex-100mhz-2ch-dso-7in-screen-64kpts-memory\"\u003eUTD2102CEX+ (100 MHz)\u003c\/a\u003e, \u003ca href=\"\/products\/utd2052cex-50mhz-2ch-dso-7in-screen-25kpts-memory\"\u003eUTD2052CEX+ (50 MHz)\u003c\/a\u003e) with 1.0 GSa\/s sample rate, and the CL+ models (\u003ca href=\"\/products\/utd2102cl-100mhz-2ch-dso-500msa-s-64kpts-memory-7in-screen\"\u003eUTD2102CL+ (100 MHz)\u003c\/a\u003e, \u003ca href=\"\/products\/utd2052cl-50mhz-2ch-dso-500msa-s-64kpts-memory-7in-screen\"\u003eUTD2052CL+ (50 MHz)\u003c\/a\u003e) with 500 MSa\/s. For more advanced features including deep memory, touchscreen, and protocol decoding, see the \u003ca href=\"\/collections\/upo1000\"\u003eUPO1000 series\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"UNI-T","offers":[{"title":"Default Title","offer_id":46699754389788,"sku":"181100100005X","price":188.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UTD2102CEX_Probes.jpg?v=1720807509"},{"product_id":"utd2052cexplus","title":"UTD2052CEX+ 50 MHz 2Ch Digital Storage Oscilloscope","description":"\u003ch1\u003eUTD2052CEX+ | 50 MHz 2Ch Digital Storage Oscilloscope\u003c\/h1\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThe UTD2052CEX+ is a 50 MHz 2-channel digital storage oscilloscope with 1.0 GSa\/s sample rate, 64 kpts memory depth, and a 7-inch display. It is a compact, affordable bench oscilloscope for basic electronics testing, education, and field service — providing reliable waveform capture and measurement without the feature complexity or cost of higher-end instruments.\u003c\/p\u003e\n\u003cp\u003eThe oscilloscope provides automated measurements for common waveform parameters, cursor measurements for manual analysis, math functions (addition, subtraction, FFT), and edge\/pulse width\/video triggering. USB connectivity supports data transfer and screenshot capture.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cdiv class=\"product-key-features\"\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e50 MHz Bandwidth, 2 Channels\u003c\/strong\u003e — Two-channel capture at up to 50 MHz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1.0 GSa\/s Sample Rate\u003c\/strong\u003e — Full-speed sampling for accurate waveform capture.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e64 kpts Memory Depth\u003c\/strong\u003e — Standard capture depth for the instrument class.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e7-Inch Display\u003c\/strong\u003e — Clear waveform display with measurement readouts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomated Measurements\u003c\/strong\u003e — Frequency, period, rise time, fall time, amplitude, duty cycle, and more.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMath Functions\u003c\/strong\u003e — Addition, subtraction, and FFT for basic waveform analysis.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMultiple Trigger Types\u003c\/strong\u003e — Edge, pulse width, and video triggering.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB Connectivity\u003c\/strong\u003e — Data transfer and screenshot export.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eCursor Measurements and Analysis\u003c\/h3\u003e\n\u003cp\u003eBuilt-in cursor measurements let you read time, voltage, and frequency values directly from the waveform display. Combined with automated measurements for rise time, fall time, frequency, period, duty cycle, and amplitude, the UTD2000CEX+ covers the essential characterization needs for general electronics work.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-utd2052cex-multi\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/UTD2000CEX-Multi.png\" alt=\"UTD2000CEX+ multi-function display\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eMulti-function display with cursor measurements\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-utd2052cex-multi\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/UTD2000CEX-Multi.png\" alt=\"UTD2000CEX+ multi-function display\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eMulti-function display with cursor measurements\u003c\/span\u003e\n\u003c\/a\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-utd2052cex-range\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/UTD2000CEX-Range.png\" alt=\"UTD2000CEX+ bandwidth and sampling\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eFull bandwidth with high-speed sampling\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003ch3\u003eFull Bandwidth Sampling\u003c\/h3\u003e\n\u003cp\u003eThe 1.0 GSa\/s sample rate provides accurate waveform capture across the full 50 MHz bandwidth. Edge triggering, pulse width triggering, and video triggering help isolate the signals of interest in busy circuits.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-utd2052cex-range\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/UTD2000CEX-Range.png\" alt=\"UTD2000CEX+ bandwidth and sampling\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eFull bandwidth with high-speed sampling\u003c\/span\u003e\n\u003c\/a\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eApplications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eElectronics Education\u003c\/strong\u003e — Affordable and straightforward for teaching basic oscilloscope operation, signal measurement, and circuit analysis.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHobbyist and Maker Projects\u003c\/strong\u003e — Debug Arduino, Raspberry Pi, and other microcontroller circuits with reliable waveform capture.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eField Service and Repair\u003c\/strong\u003e — Compact and portable for on-site diagnostics of electronic and electrical equipment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBasic R\u0026amp;D Prototyping\u003c\/strong\u003e — Verify signal timing, check power supply behavior, and characterize basic circuit performance during development.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eWhat is the difference between the CEX+ and CL+ models?\u003c\/p\u003e\n\u003cp\u003eThe CEX+ models have a 1.0 GSa\/s sample rate (twice the CL+), which provides better waveform fidelity at higher frequencies. The CL+ models offer 500 MSa\/s at a lower price point. Both share the same 7-inch display, trigger types, and measurement functions.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eDoes the UTD2000 series support protocol decoding?\u003c\/p\u003e\n\u003cp\u003eNo. The UTD2000 series is designed for basic analog waveform measurement. For serial bus decoding, see the \u003ca href=\"\/collections\/mso-upo2000e\"\u003eMSO\/UPO2000\u003c\/a\u003e or \u003ca href=\"\/collections\/upo1000\"\u003eUPO1000\u003c\/a\u003e series.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eCan I save waveforms and screenshots?\u003c\/p\u003e\n\u003cp\u003eYes. The USB interface supports saving waveform data and screenshots to a connected PC for documentation and further analysis.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003cp\u003eThe UTD2000 economy oscilloscope series includes the CEX+ models (\u003ca href=\"\/products\/utd2202cex-200mhz-2ch-dso-7in-screen-64kpts-memory\"\u003eUTD2202CEX+ (200 MHz)\u003c\/a\u003e, \u003ca href=\"\/products\/utd2102cex-100mhz-2ch-dso-7in-screen-64kpts-memory\"\u003eUTD2102CEX+ (100 MHz)\u003c\/a\u003e, \u003ca href=\"\/products\/utd2052cex-50mhz-2ch-dso-7in-screen-25kpts-memory\"\u003eUTD2052CEX+ (50 MHz)\u003c\/a\u003e) with 1.0 GSa\/s sample rate, and the CL+ models (\u003ca href=\"\/products\/utd2102cl-100mhz-2ch-dso-500msa-s-64kpts-memory-7in-screen\"\u003eUTD2102CL+ (100 MHz)\u003c\/a\u003e, \u003ca href=\"\/products\/utd2052cl-50mhz-2ch-dso-500msa-s-64kpts-memory-7in-screen\"\u003eUTD2052CL+ (50 MHz)\u003c\/a\u003e) with 500 MSa\/s. For more advanced features including deep memory, touchscreen, and protocol decoding, see the \u003ca href=\"\/collections\/upo1000\"\u003eUPO1000 series\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"UNI-T","offers":[{"title":"Default Title","offer_id":46699817304348,"sku":"181100100053X","price":183.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UTD2052CEX_Probes.jpg?v=1720807518"},{"product_id":"utd2102clplus","title":"UTD2102CL+ 100 MHz 2Ch Digital Storage Oscilloscope","description":"\u003ch1\u003eUTD2102CL+ | 100 MHz 2Ch Digital Storage Oscilloscope\u003c\/h1\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThe UTD2102CL+ is a 100 MHz 2-channel digital storage oscilloscope with 500 MSa\/s sample rate, 64 kpts memory depth, and a 7-inch display. It is a compact, affordable bench oscilloscope for basic electronics testing, education, and field service — providing reliable waveform capture and measurement without the feature complexity or cost of higher-end instruments.\u003c\/p\u003e\n\u003cp\u003eThe oscilloscope provides automated measurements for common waveform parameters, cursor measurements for manual analysis, math functions (addition, subtraction, FFT), and edge\/pulse width\/video triggering. USB connectivity supports data transfer and screenshot capture.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cdiv class=\"product-key-features\"\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e100 MHz Bandwidth, 2 Channels\u003c\/strong\u003e — Two-channel capture at up to 100 MHz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e500 MSa\/s Sample Rate\u003c\/strong\u003e — Adequate sampling for accurate waveform capture.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e64 kpts Memory Depth\u003c\/strong\u003e — Extended capture depth for the instrument class.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e7-Inch Display\u003c\/strong\u003e — Clear waveform display with measurement readouts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomated Measurements\u003c\/strong\u003e — Frequency, period, rise time, fall time, amplitude, duty cycle, and more.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMath Functions\u003c\/strong\u003e — Addition, subtraction, and FFT for basic waveform analysis.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMultiple Trigger Types\u003c\/strong\u003e — Edge, pulse width, and video triggering.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB Connectivity\u003c\/strong\u003e — Data transfer and screenshot export.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eZoom Window for Detail Examination\u003c\/h3\u003e\n\u003cp\u003eThe zoom function lets you expand a portion of the captured waveform for closer inspection while keeping the full record visible. Useful for examining edges, glitches, or protocol timing within a longer capture.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-utd2102cl-zoom\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/UTD2000CL-Zoom.png\" alt=\"UTD2000CL zoom and navigation\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eZoom window for examining waveform details\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-utd2102cl-zoom\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/UTD2000CL-Zoom.png\" alt=\"UTD2000CL zoom and navigation\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eZoom window for examining waveform details\u003c\/span\u003e\n\u003c\/a\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-utd2102cl-trig\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/UTD2000CL-Triggers.png\" alt=\"UTD2000CL trigger types\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eMultiple trigger types for signal isolation\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003ch3\u003eMultiple Trigger Types\u003c\/h3\u003e\n\u003cp\u003eEdge, pulse width, and video triggering help isolate signals of interest. The 500 MSa\/s sample rate and 64 kpts memory depth provide adequate capture for general-purpose electronics testing and education.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-utd2102cl-trig\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/UTD2000CL-Triggers.png\" alt=\"UTD2000CL trigger types\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eMultiple trigger types for signal isolation\u003c\/span\u003e\n\u003c\/a\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eApplications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eElectronics Education\u003c\/strong\u003e — Affordable and straightforward for teaching basic oscilloscope operation, signal measurement, and circuit analysis.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHobbyist and Maker Projects\u003c\/strong\u003e — Debug Arduino, Raspberry Pi, and other microcontroller circuits with reliable waveform capture.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eField Service and Repair\u003c\/strong\u003e — Compact and portable for on-site diagnostics of electronic and electrical equipment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBasic R\u0026amp;D Prototyping\u003c\/strong\u003e — Verify signal timing, check power supply behavior, and characterize basic circuit performance during development.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eWhat is the difference between the CEX+ and CL+ models?\u003c\/p\u003e\n\u003cp\u003eThe CEX+ models have a higher sample rate, which provides better waveform fidelity at higher frequencies. The CL+ models offer 500 MSa\/s at a lower price point. Both share the same 7-inch display, trigger types, and measurement functions.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eDoes the UTD2000 series support protocol decoding?\u003c\/p\u003e\n\u003cp\u003eNo. The UTD2000 series is designed for basic analog waveform measurement. For serial bus decoding, see the \u003ca href=\"\/collections\/mso-upo2000e\"\u003eMSO\/UPO2000\u003c\/a\u003e or \u003ca href=\"\/collections\/upo1000\"\u003eUPO1000\u003c\/a\u003e series.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eCan I save waveforms and screenshots?\u003c\/p\u003e\n\u003cp\u003eYes. The USB interface supports saving waveform data and screenshots to a connected PC for documentation and further analysis.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003cp\u003eThe UTD2000 economy oscilloscope series includes the CEX+ models (\u003ca href=\"\/products\/utd2202cex-200mhz-2ch-dso-7in-screen-64kpts-memory\"\u003eUTD2202CEX+ (200 MHz)\u003c\/a\u003e, \u003ca href=\"\/products\/utd2102cex-100mhz-2ch-dso-7in-screen-64kpts-memory\"\u003eUTD2102CEX+ (100 MHz)\u003c\/a\u003e, \u003ca href=\"\/products\/utd2052cex-50mhz-2ch-dso-7in-screen-25kpts-memory\"\u003eUTD2052CEX+ (50 MHz)\u003c\/a\u003e) with 1.0 GSa\/s sample rate, and the CL+ models (\u003ca href=\"\/products\/utd2102cl-100mhz-2ch-dso-500msa-s-64kpts-memory-7in-screen\"\u003eUTD2102CL+ (100 MHz)\u003c\/a\u003e, \u003ca href=\"\/products\/utd2052cl-50mhz-2ch-dso-500msa-s-64kpts-memory-7in-screen\"\u003eUTD2052CL+ (50 MHz)\u003c\/a\u003e) with 500 MSa\/s. For more advanced features including deep memory, touchscreen, and protocol decoding, see the \u003ca href=\"\/collections\/upo1000\"\u003eUPO1000 series\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"UNI-T","offers":[{"title":"Default Title","offer_id":46699851907356,"sku":"181100100026X","price":180.4,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UTD2102CL_Probes.jpg?v=1720807536"},{"product_id":"utd2052clplus","title":"UTD2052CL+ 50 MHz 2Ch Digital Storage Oscilloscope","description":"\u003ch1\u003eUTD2052CL+ | 50 MHz 2Ch Digital Storage Oscilloscope\u003c\/h1\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThe UTD2052CL+ is a 50 MHz 2-channel digital storage oscilloscope with 500 MSa\/s sample rate, 64 kpts memory depth, and a 7-inch display. It is a compact, affordable bench oscilloscope for basic electronics testing, education, and field service — providing reliable waveform capture and measurement without the feature complexity or cost of higher-end instruments.\u003c\/p\u003e\n\u003cp\u003eThe oscilloscope provides automated measurements for common waveform parameters, cursor measurements for manual analysis, math functions (addition, subtraction, FFT), and edge\/pulse width\/video triggering. USB connectivity supports data transfer and screenshot capture.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cdiv class=\"product-key-features\"\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e50 MHz Bandwidth, 2 Channels\u003c\/strong\u003e — Two-channel capture at up to 50 MHz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e500 MSa\/s Sample Rate\u003c\/strong\u003e — Adequate sampling for accurate waveform capture.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e64 kpts Memory Depth\u003c\/strong\u003e — Extended capture depth for the instrument class.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e7-Inch Display\u003c\/strong\u003e — Clear waveform display with measurement readouts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomated Measurements\u003c\/strong\u003e — Frequency, period, rise time, fall time, amplitude, duty cycle, and more.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMath Functions\u003c\/strong\u003e — Addition, subtraction, and FFT for basic waveform analysis.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMultiple Trigger Types\u003c\/strong\u003e — Edge, pulse width, and video triggering.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB Connectivity\u003c\/strong\u003e — Data transfer and screenshot export.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eZoom Window for Detail Examination\u003c\/h3\u003e\n\u003cp\u003eThe zoom function lets you expand a portion of the captured waveform for closer inspection while keeping the full record visible. Useful for examining edges, glitches, or protocol timing within a longer capture.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-utd2052cl-zoom\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/UTD2000CL-Zoom.png\" alt=\"UTD2000CL zoom and navigation\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eZoom window for examining waveform details\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-utd2052cl-zoom\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/UTD2000CL-Zoom.png\" alt=\"UTD2000CL zoom and navigation\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eZoom window for examining waveform details\u003c\/span\u003e\n\u003c\/a\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-utd2052cl-trig\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/UTD2000CL-Triggers.png\" alt=\"UTD2000CL trigger types\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eMultiple trigger types for signal isolation\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003ch3\u003eMultiple Trigger Types\u003c\/h3\u003e\n\u003cp\u003eEdge, pulse width, and video triggering help isolate signals of interest. The 500 MSa\/s sample rate and 64 kpts memory depth provide adequate capture for general-purpose electronics testing and education.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-utd2052cl-trig\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/UTD2000CL-Triggers.png\" alt=\"UTD2000CL trigger types\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eMultiple trigger types for signal isolation\u003c\/span\u003e\n\u003c\/a\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eApplications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eElectronics Education\u003c\/strong\u003e — Affordable and straightforward for teaching basic oscilloscope operation, signal measurement, and circuit analysis.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHobbyist and Maker Projects\u003c\/strong\u003e — Debug Arduino, Raspberry Pi, and other microcontroller circuits with reliable waveform capture.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eField Service and Repair\u003c\/strong\u003e — Compact and portable for on-site diagnostics of electronic and electrical equipment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBasic R\u0026amp;D Prototyping\u003c\/strong\u003e — Verify signal timing, check power supply behavior, and characterize basic circuit performance during development.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eWhat is the difference between the CEX+ and CL+ models?\u003c\/p\u003e\n\u003cp\u003eThe CEX+ models have a higher sample rate, which provides better waveform fidelity at higher frequencies. The CL+ models offer 500 MSa\/s at a lower price point. Both share the same 7-inch display, trigger types, and measurement functions.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eDoes the UTD2000 series support protocol decoding?\u003c\/p\u003e\n\u003cp\u003eNo. The UTD2000 series is designed for basic analog waveform measurement. For serial bus decoding, see the \u003ca href=\"\/collections\/mso-upo2000e\"\u003eMSO\/UPO2000\u003c\/a\u003e or \u003ca href=\"\/collections\/upo1000\"\u003eUPO1000\u003c\/a\u003e series.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eCan I save waveforms and screenshots?\u003c\/p\u003e\n\u003cp\u003eYes. The USB interface supports saving waveform data and screenshots to a connected PC for documentation and further analysis.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003cp\u003eThe UTD2000 economy oscilloscope series includes the CEX+ models (\u003ca href=\"\/products\/utd2202cex-200mhz-2ch-dso-7in-screen-64kpts-memory\"\u003eUTD2202CEX+ (200 MHz)\u003c\/a\u003e, \u003ca href=\"\/products\/utd2102cex-100mhz-2ch-dso-7in-screen-64kpts-memory\"\u003eUTD2102CEX+ (100 MHz)\u003c\/a\u003e, \u003ca href=\"\/products\/utd2052cex-50mhz-2ch-dso-7in-screen-25kpts-memory\"\u003eUTD2052CEX+ (50 MHz)\u003c\/a\u003e) with 1.0 GSa\/s sample rate, and the CL+ models (\u003ca href=\"\/products\/utd2102cl-100mhz-2ch-dso-500msa-s-64kpts-memory-7in-screen\"\u003eUTD2102CL+ (100 MHz)\u003c\/a\u003e, \u003ca href=\"\/products\/utd2052cl-50mhz-2ch-dso-500msa-s-64kpts-memory-7in-screen\"\u003eUTD2052CL+ (50 MHz)\u003c\/a\u003e) with 500 MSa\/s. For more advanced features including deep memory, touchscreen, and protocol decoding, see the \u003ca href=\"\/collections\/upo1000\"\u003eUPO1000 series\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"UNI-T","offers":[{"title":"Default Title","offer_id":46699856167196,"sku":"181100100025X","price":219.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UTD2052CL_Probes.jpg?v=1720807544"},{"product_id":"mso3502e","title":"MSO3502E 500 MHz 2+16Ch Mixed Signal Oscilloscope","description":"\u003ch1\u003eMSO3502E | 500 MHz 2+16Ch Mixed Signal Oscilloscope\u003c\/h1\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThe MSO3502E is a 500 MHz mixed signal oscilloscope with 2 analog channels and 16 digital channels (logic analyzer included). It samples at 2.5 GSa\/s with 250 Mpts memory depth and captures waveforms at up to 200,000 wfms\/s on an 8-inch capacitive touchscreen. All MSO\/UPO3000E-series instruments share the same platform — the same sample rate, memory, and measurement engine — with differences only in bandwidth, channel count, and included accessories.\u003c\/p\u003e\n\u003cp\u003eThe oscilloscope provides 36 automated measurements with statistics, advanced triggering (edge, pulse width, slope, video, pattern, and area trigger), Bode plot analysis for power supply loop characterization, and web-based remote control via LAN. Serial bus protocol decoding for RS-232, UART, I²C, SPI, CAN, CAN-FD, LIN, and FlexRay is available as optional software licenses.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-mso3502e-cap\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO3000-Capture.png\" alt=\"MSO3000E high-speed waveform capture\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003e200,000 wfms\/s capture rate reveals infrequent anomalies\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-mso3502e-mem\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO3000-Capture.png\" alt=\"MSO3000E high-speed waveform capture\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003e200,000 wfms\/s capture rate reveals infrequent anomalies\u003c\/span\u003e\n\u003c\/a\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cdiv class=\"product-key-features\"\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e500 MHz Bandwidth, 2 Analog Channels\u003c\/strong\u003e — Two-channel capture at up to 500 MHz for mixed-signal debugging and signal analysis.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2.5 GSa\/s Sample Rate\u003c\/strong\u003e — Captures fast edges and high-frequency content with accurate timing resolution.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e250 Mpts Memory Depth\u003c\/strong\u003e — Deep memory for capturing long signal records without reducing sample rate.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e200,000 wfms\/s Capture Rate\u003c\/strong\u003e — Fast acquisition reveals infrequent glitches, runts, and timing violations that slower scopes miss.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e16 Digital Channels (Logic Analyzer Included)\u003c\/strong\u003e — Mixed-signal debugging with time-correlated analog and digital views. Logic probe pod included.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e36 Automated Measurements\u003c\/strong\u003e — Time, voltage, frequency, and statistical measurements with min\/max\/average\/standard deviation tracking.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eArea Trigger\u003c\/strong\u003e — Draw a region on screen and trigger when a waveform enters or exits it — effective for isolating anomalies in complex signals.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBode Plot Analysis\u003c\/strong\u003e — Automated frequency response measurement for characterizing power supply control loops and filter circuits.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e8-Inch Capacitive Touchscreen\u003c\/strong\u003e — Pinch, zoom, drag, and gesture navigation for efficient waveform interaction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeb Remote Control\u003c\/strong\u003e — Access the oscilloscope interface from any browser on the LAN — no software installation required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnectivity\u003c\/strong\u003e — USB, LAN, VGA, EXT trigger, AUX output.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eDeep Memory for Complete Signal Capture\u003c\/h3\u003e\n\u003cp\u003eWith 250 Mpts of memory depth, the oscilloscope maintains its full 2.5 GSa\/s sample rate across wide time base settings. This means you can capture an entire communication sequence, a full power-on cycle, or a long servo motor control loop without aliasing or missing events. Zoom into any portion of the captured record to examine details at full resolution.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-mso3502e-cap\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO3000-Capture.png\" alt=\"MSO3000E high-speed waveform capture\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003e200,000 wfms\/s capture rate reveals infrequent anomalies\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-mso3502e-cap\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO3000-Capture.png\" alt=\"MSO3000E high-speed waveform capture\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003e200,000 wfms\/s capture rate reveals infrequent anomalies\u003c\/span\u003e\n\u003c\/a\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eMixed-Signal Debugging\u003c\/h3\u003e\n\u003cp\u003eThe 16 digital channels display alongside analog traces with full time correlation, letting you see bus activity and analog behavior on the same time axis. This is critical for debugging embedded systems where a software command on I²C triggers an analog response — you need to see both to understand the system. The logic probe pod is included with all MSO models.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-mso3502e-la\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO3000-LAScreen.png\" alt=\"MSO3000E logic analyzer display with 16 digital channels\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003e16-channel logic analyzer view correlated with analog traces\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-mso3502e-la\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO3000-LAScreen.png\" alt=\"MSO3000E logic analyzer display with 16 digital channels\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003e16-channel logic analyzer view correlated with analog traces\u003c\/span\u003e\n\u003c\/a\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-mso3502e-trig\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO3000-AreaTrigger.png\" alt=\"MSO3000E area trigger function\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eArea trigger for isolating anomalies in complex signals\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003ch3\u003eAdvanced Triggering and Area Trigger\u003c\/h3\u003e\n\u003cp\u003eBeyond standard edge triggering, the MSO\/UPO3000E supports pulse width, slope, video, pattern, and timeout triggers for isolating specific signal conditions. The area trigger lets you draw a box on screen and trigger when a waveform enters or exits it — particularly effective for catching anomalies in signals where you know what the waveform should look like but not exactly when the fault will occur.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-mso3502e-trig\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO3000-AreaTrigger.png\" alt=\"MSO3000E area trigger function\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eArea trigger for isolating anomalies in complex signals\u003c\/span\u003e\n\u003c\/a\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eWeb-Based Remote Control\u003c\/h3\u003e\n\u003cp\u003eConnect the oscilloscope to your LAN and access the full interface from any web browser — no dedicated software installation required. Adjust settings, view waveforms, capture screenshots, and transfer data remotely. This is useful for rack-mounted test setups, shared lab instruments, or situations where the oscilloscope is physically difficult to access.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-mso3502e-web\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO3000-webcontrol.png\" alt=\"MSO3000E web-based remote control interface\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eWeb-based remote control from any browser on the LAN\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ca id=\"lb-mso3502e-web\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/uni-t\/image\/upload\/MSO3000-webcontrol.png\" alt=\"MSO3000E web-based remote control interface\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eWeb-based remote control from any browser on the LAN\u003c\/span\u003e\n\u003c\/a\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eApplications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEmbedded Systems Development\u003c\/strong\u003e — Debug microcontroller firmware with time-correlated analog and digital views. Decode SPI, I²C, UART, and CAN bus traffic alongside power rails and clock signals.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Electronics\u003c\/strong\u003e — Capture switching waveforms with deep memory, characterize control loop stability with Bode plot analysis, and trigger on specific voltage or timing conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEducation and Training\u003c\/strong\u003e — The touchscreen interface and automated measurements lower the barrier for students learning oscilloscope operation, while the advanced features support upper-level lab coursework.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturing and Quality\u003c\/strong\u003e — Automated measurements with pass\/fail limits, web remote control for rack-mounted setups, and data export for test documentation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eAre serial bus protocol decodes included?\u003c\/p\u003e\n\u003cp\u003eNo. Protocol decoding for RS-232, UART, I²C, SPI, CAN, CAN-FD, LIN, and FlexRay is available as optional software licenses. See the \u003ca href=\"\/collections\/mso3000e\"\u003eMSO\/UPO3000E series page\u003c\/a\u003e for available decode options.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eWhat is the difference between MSO and UPO models?\u003c\/p\u003e\n\u003cp\u003eMSO models include the 16-channel logic probe pod in the box. UPO models are the same oscilloscope without the logic pod — you can add it later with the \u003ca href=\"\/products\/ut-m15\"\u003eUT-M15\u003c\/a\u003e and \u003ca href=\"\/products\/upo3000cs-la16\"\u003eLA16 software license\u003c\/a\u003e. All other specifications are identical between MSO and UPO models at the same bandwidth and channel count.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eCan I upgrade the bandwidth later?\u003c\/p\u003e\n\u003cp\u003eNo. The bandwidth is fixed at the factory. Choose the bandwidth you need at purchase — 500 MHz for this model. The 500 MHz and 350 MHz models share the same chassis and feature set.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"product-container\"\u003e\n\u003cp\u003ePart of the \u003ca href=\"\/collections\/mso3000e\"\u003eMSO\/UPO3000E oscilloscope series\u003c\/a\u003e. All models share the same 2.5 GSa\/s sample rate, 250 Mpts memory, and measurement engine. See the \u003ca href=\"\/collections\/mso3000e\"\u003eseries comparison table\u003c\/a\u003e to find the right combination of bandwidth, channels, and accessories for your application.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"UNI-T","offers":[{"title":"Default Title","offer_id":46792030617884,"sku":"181100300032X","price":2239.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/MSO3502E_Probes.jpg?v=1720807554"},{"product_id":"uts3084b","title":"UTS3084B 8.4GHz Performance-Series Spectrum Analyzer","description":"\u003ch1\u003eUNI-T UTS3084B 8.4GHz Performance-Series Spectrum Analyzer: 8.4 GHz Performance Spectrum Analyzer\u003c\/h1\u003e\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eUNI-T UTS3084B Performance-Series Spectrum Analyzer\u003c\/strong\u003e covers \u003cstrong\u003e9 kHz – 8.4 GHz\u003c\/strong\u003e with a 10.1-inch capacitive multi-touch display, a 1 Hz resolution-bandwidth floor, and up to 40,001 sweep points. Built for engineers who need the full sub-8.4 GHz spectrum view — wireless backhaul, sub-6 GHz cellular, microwave radio links, and broad harmonic surveys — without the cost of a microwave-class signal analyzer.\u003c\/p\u003e\n\u003cp\u003eA typical displayed average noise level of \u003cstrong\u003e-161 dBm\/Hz\u003c\/strong\u003e (preamp on) and phase noise of \u003cstrong\u003e\u0026lt;-98 dBc\/Hz\u003c\/strong\u003e at a 10 kHz offset deliver the dynamic range needed for serious signal characterization across the band. Standard interfaces include HDMI 1.4 display output, USB-A 3.0 (Host), USB-B 2.0 (Device), and Gigabit LAN with full SCPI support.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote on tracking generator:\u003c\/strong\u003e The UTS3084B does not ship with a tracking generator and cannot be field-upgraded to add one — the TG hardware is not provisioned at the chassis level. If your workflow requires scalar transmission measurements (filter sweeps, amplifier response, antenna return loss) at 8.4 GHz, the matching SKU is the \u003ca href=\"\/products\/uts3084t-8-4ghz-performance-series-spectrum-analyzer-with-tracking-generator\"\u003e\u003cstrong\u003eUTS3084T\u003c\/strong\u003e\u003c\/a\u003e, which includes a 100 kHz – 6 GHz integrated tracking generator. For 2.1 GHz or 3.6 GHz analyzers, the lower-frequency UTS3021B and UTS3036B are field-upgradeable via the UTS3000-TG option.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cdiv class=\"product-key-features\"\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e9 kHz – 8.4 GHz frequency coverage\u003c\/strong\u003e — sub-8.4 GHz for general RF dev, communications, harmonic surveys, and EMI pre-compliance work\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e-161 dBm\/Hz typical DANL\u003c\/strong\u003e (preamp on) — sensitive enough to resolve low-level signals, spurs, and harmonic energy near the noise floor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u0026lt;-98 dBc\/Hz phase noise @ 10 kHz offset\u003c\/strong\u003e (typical, 1 GHz carrier) — clean enough for close-in spectral measurements and modulated-signal analysis\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1 Hz – 3 MHz RBW\u003c\/strong\u003e in 1-3-10 steps — fine resolution control all the way down to a 1 Hz floor, with FFT mode for faster narrowband sweeps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e40,001 sweep points\u003c\/strong\u003e — deep trace detail (4× the count of UNI-T's entry tier) for catching signals that coarser analyzers miss\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e10.1-inch capacitive multi-touch display\u003c\/strong\u003e (1280 × 800) — pinch, drag, and tap to set markers, with full mouse\/keyboard support via USB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSix traces with five detector modes\u003c\/strong\u003e — Sample, Peak, Negative, Normal, Average; Clear\/Write, Average, Max Hold, Min Hold trace types\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor tracking-generator workflows at 8.4 GHz\u003c\/strong\u003e, see the matching \u003ca href=\"\/products\/uts3084t-8-4ghz-performance-series-spectrum-analyzer-with-tracking-generator\"\u003eUTS3084T\u003c\/a\u003e — the UTS3084B chassis does not support a TG upgrade\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull SCPI remote control\u003c\/strong\u003e — over USB-Device (USB-B 2.0) and LAN VXI-11 (10\/100\/1000 Base) for automated test, production lines, and unattended data collection\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOption-extensible\u003c\/strong\u003e — add \u003ca href=\"\/products\/uts3000b-ama\"\u003eUTS3000-AMA\u003c\/a\u003e (analog demodulation), \u003ca href=\"\/products\/uts3000b-amk\"\u003eUTS3000-AMK\u003c\/a\u003e (advanced measurement kit), or \u003ca href=\"\/products\/uts3000b-emi\"\u003eUTS3000-EMI\u003c\/a\u003e (EMI pre-compliance) as your work scope grows\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt to last in working environments\u003c\/strong\u003e — forced-air cooling with a user-removable dust filter to keep the internals clean across years of bench use\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eUNI-T UTS3084B Details\u003c\/h2\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eFrequency Coverage (9 kHz – 8.4 GHz)\u003c\/h3\u003e\n\u003cp\u003eThe UTS3084B sweeps continuously from 9 kHz up to \u003cstrong\u003e8.4 GHz\u003c\/strong\u003e, with 1 Hz frequency resolution and marker counter accuracy on the same order. The 8.4 GHz ceiling reaches well into C-band territory — covering all sub-6 GHz cellular (5G NR FR1, 5 GHz Wi-Fi\/Wi-Fi 6E lower bands), satellite L\/S-band downlinks, microwave point-to-point links, and a generous harmonic margin for 4 GHz transmitter and oscillator work. A 1 Hz frequency reference calibration accuracy with \u0026lt;1 ppm temperature stability keeps measurements steady across the calibration cycle.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-uts3084b-8-4ghz-performance-series-spectrum-analyzer-sweep\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTS3000B-Sweep.png\" alt=\"UNI-T UTS3084B Sweep Display\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eUNI-T UTS3084B 40,001-Point Sweep\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eSensitivity (DANL as low as -161 dBm\/Hz)\u003c\/h3\u003e\n\u003cp\u003eWeak-signal testing depends on how quiet the analyzer itself is. With the preamp on, the UTS3084B reaches a typical displayed average noise level of \u003cstrong\u003e-161 dBm\/Hz\u003c\/strong\u003e in the 200 MHz – 1.5 GHz band — low enough to resolve faint emissions, identify harmonic energy well below the carrier, and characterize signals near the noise floor. Five detector modes (Sample, Peak, Negative, Normal, Average) and four trace types give you the flexibility to tune what the trace shows for any measurement context. A switchable 20 dB preamp adds gain when you need it, and the input attenuator adjusts in 1 dB steps from 0 to 51 dB.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-uts3084b-8-4ghz-performance-series-spectrum-analyzer-sensitivity\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTS3000B-Sensitivity.png\" alt=\"UNI-T UTS3084B Sensitivity\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eUNI-T UTS3084B -161 dBm\/Hz DANL\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch3\u003ePhase Noise (\u0026lt;-98 dBc\/Hz at 10 kHz offset)\u003c\/h3\u003e\n\u003cp\u003eClean local-oscillator performance matters when you're working close to a strong carrier — modulated signal analysis, narrowband interference identification, or oscillator-quality measurement. With \u003cstrong\u003etypical phase noise of \u0026lt;-98 dBc\/Hz at a 10 kHz offset\u003c\/strong\u003e from a 1 GHz carrier (measured with a 1 kHz RBW and 10 Hz VBW), the UTS3084B resolves close-in spectral content without the phase noise pedestal washing it out. Typical performance at a 1 MHz offset is in the -112 to -116 dBc\/Hz range — well-suited for general modulated-signal and oscillator work.\u003c\/p\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003e1 Hz – 3 MHz Resolution Bandwidth\u003c\/h3\u003e\n\u003cp\u003eResolution bandwidth in 1-3-10 steps, from 1 Hz all the way to \u003cstrong\u003e3 MHz\u003c\/strong\u003e, gives you the right sweep speed \/ selectivity trade-off for any measurement. Drop the RBW to 1 Hz to separate signals closer together in frequency than most mid-tier analyzers can manage; widen it for fast high-level surveys. Bandwidth accuracy holds within 5% nominal, and switching between resolution settings introduces only ±0.2 dB relative amplitude uncertainty. The shape factor (-60 dB \/ -3 dB ratio) is \u0026lt;4.8:1 nominal — tight skirts that help you separate close-in signals of unequal amplitude. FFT sweep mode is also available for faster narrowband measurements.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-uts3084b-8-4ghz-performance-series-spectrum-analyzer-selectivity\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTS3000B-Selectivity.png\" alt=\"UNI-T UTS3084B Selectivity\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eUNI-T UTS3084B RBW Selectivity\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch3\u003e40,001 Sweep Points\u003c\/h3\u003e\n\u003cp\u003eMore points across a trace means finer frequency resolution per pixel and a much better chance of catching signals that fall between coarser bins. The UTS3084B provides up to \u003cstrong\u003e40,001 sweep points per trace\u003c\/strong\u003e — four times the count of UNI-T's entry-tier UTS1000B series, and high enough to clearly distinguish closely-spaced signals, identify intermittent emissions, and read marker frequencies with confidence. Combined with six independent traces, you can simultaneously display raw, max-hold, min-hold, and averaged versions of the same span.\u003c\/p\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003e10.1-inch Multi-Touch Interface\u003c\/h3\u003e\n\u003cp\u003eThe UTS3084B uses a 10.1-inch capacitive multi-touch display (1280 × 800 HD resolution) for direct interaction with traces, markers, and menus. Pinch, drag, and zoom directly on the trace; set markers by tapping where you want them; navigate menus the way you'd expect on a modern tablet. For lab environments where a USB mouse or keyboard is more practical, the UTS3084B accepts those through the USB Host port. The touch UI cuts measurement setup time noticeably on day-to-day bench work — especially when you're repeatedly adjusting span, RBW, and marker positions across many sweeps.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-uts3084b-8-4ghz-performance-series-spectrum-analyzer-touch\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTS3000B-Touch.png\" alt=\"UNI-T UTS3084B Touch Interface\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eUNI-T UTS3084B 10.1-inch Multi-Touch UI\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch3\u003eMarker Suite (4 Markers, 5 Functions)\u003c\/h3\u003e\n\u003cp\u003eFour markers with three modes (Normal, Delta, Fixed) cover the basic measurement vocabulary — reading absolute level, computing delta between two points, locking a marker to a frequency for sweep-to-sweep comparison. Five built-in marker functions go further: \u003cstrong\u003eMarker Noise\u003c\/strong\u003e reads noise density in dBm\/Hz at the marker, \u003cstrong\u003eBand Power\u003c\/strong\u003e integrates total power over a user-defined band, \u003cstrong\u003eBand Density\u003c\/strong\u003e reports power per Hz across that band, \u003cstrong\u003eN dB\u003c\/strong\u003e auto-finds the points N dB down from a peak (useful for measuring -3 dB or -6 dB bandwidths), and \u003cstrong\u003eCounter\u003c\/strong\u003e reads frequency to 1 Hz resolution.\u003c\/p\u003e\n\u003ch3\u003eConnectivity (HDMI, USB, LAN, 10 MHz Ref)\u003c\/h3\u003e\n\u003cp\u003eA full set of standard rear-panel interfaces makes the UTS3084B easy to fit into any workflow:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRF Input:\u003c\/strong\u003e Type-N female, 50 Ω\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHDMI 1.4 display output\u003c\/strong\u003e — mirror the trace to an external monitor for shared review or training\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB-A 3.0 Host\u003c\/strong\u003e + \u003cstrong\u003eUSB-B 2.0 Device\u003c\/strong\u003e — thumb drive, mouse\/keyboard, and SCPI over USB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLAN VXI-11 (10\/100\/1000 Base, RJ-45)\u003c\/strong\u003e — networked remote control\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e10 MHz reference in\/out\u003c\/strong\u003e (BNC) — lock to an external timebase or share the internal reference\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExternal trigger input\u003c\/strong\u003e (TTL, BNC, rising\/falling edge)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSCPI Remote Control for Automated Test\u003c\/h3\u003e\n\u003cp\u003eThe UTS3084B responds to industry-standard SCPI commands over both USB-Device (USB-B 2.0) and LAN VXI-11 (RJ-45). That means it drops cleanly into pyvisa, LabVIEW, NI-MAX, or any other test framework that talks to standard instruments — no proprietary protocol layer to learn, no special drivers beyond a USB or LAN connection. Whether you're building a production test rig, automating a parametric sweep across DUTs, or running unattended overnight data collection, the interface scales the same way the rest of the bench does. The full SCPI command set is documented in the UTS3000B Programming Manual.\u003c\/p\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eSoftware Options for Specialized Measurements\u003c\/h3\u003e\n\u003cp\u003eThe UTS3084B starts as a capable general-purpose spectrum analyzer and grows into specialized roles through software options — the instrument hardware is the same; the options unlock measurement modes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/products\/uts3000b-amk\"\u003eUTS3000-AMK\u003c\/a\u003e (Advanced Measurement Kit)\u003c\/strong\u003e — adds channel power, adjacent channel power (ACP), occupied bandwidth (OBW), time-domain power, carrier-to-noise ratio (CNR), third-order intercept (TOI), and harmonic measurements (up to the 10th harmonic), plus a spectrogram display for time-history visualization\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/products\/uts3000b-ama\"\u003eUTS3000-AMA\u003c\/a\u003e (Analog Demodulation)\u003c\/strong\u003e — AM and FM demodulation analysis with modulation rate, depth, and frequency offset measurements (20 Hz – 100 kHz modulation rate range)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/products\/uts3000b-emi\"\u003eUTS3000-EMI\u003c\/a\u003e (EMI Pre-Compliance)\u003c\/strong\u003e — CISPR-aligned QP\/AVG\/PEAK detectors, EMI band sweep, and limit-line analysis. Pairs with the optional \u003ca href=\"\/products\/uts-emi01-near-field-probe-kit\"\u003eUTS-EMI01 near-field probe kit\u003c\/a\u003e (3 mm to 10 cm probes, 30 MHz – 3 GHz) for board-level emission hunting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-uts3084b-8-4ghz-performance-series-spectrum-analyzer-options-emi\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTS3000B-EMI.png\" alt=\"UNI-T UTS3084B EMI Pre-Compliance with UTS-EMI01 Probes\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eUNI-T UTS3084B EMI Pre-Compliance Mode\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eBuilt for Working Lab Environments\u003c\/h3\u003e\n\u003cp\u003eA spectrum analyzer that lives next to soldering stations, drilling, and general bench work will breathe in dust over time. The UTS3084B addresses this with forced-air cooling and a \u003cstrong\u003euser-removable dust filter\u003c\/strong\u003e — pop it out, vacuum or blow it off, and slide it back. No tools, no service-center trip, no fan failures from dust accumulation. Operating range is 0 °C to +40 °C, storage to -20 °C \/ +70 °C, with full ±1 ppm timebase stability across the operational temperature range. The full IEC 61326 EMC compliance and EN 61010 safety qualification (with cETLus mark) round out a unit built to hold up across years of bench use.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-uts3084b-8-4ghz-performance-series-spectrum-analyzer-dust\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTS3000B-Dust.png\" alt=\"UNI-T UTS3084B Removable Dust Filter\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eUNI-T UTS3084B User-Removable Dust Filter\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ca id=\"lb-uts3084b-8-4ghz-performance-series-spectrum-analyzer-sweep\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTS3000B-Sweep.png\" alt=\"UNI-T UTS3084B Sweep Display\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eUNI-T UTS3084B 40,001-Point Sweep\u003c\/span\u003e\n\u003c\/a\u003e\n\u003ca id=\"lb-uts3084b-8-4ghz-performance-series-spectrum-analyzer-sensitivity\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTS3000B-Sensitivity.png\" alt=\"UNI-T UTS3084B Sensitivity\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eUNI-T UTS3084B -161 dBm\/Hz DANL\u003c\/span\u003e\n\u003c\/a\u003e\n\u003ca id=\"lb-uts3084b-8-4ghz-performance-series-spectrum-analyzer-selectivity\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTS3000B-Selectivity.png\" alt=\"UNI-T UTS3084B Selectivity\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eUNI-T UTS3084B RBW Selectivity\u003c\/span\u003e\n\u003c\/a\u003e\n\u003ca id=\"lb-uts3084b-8-4ghz-performance-series-spectrum-analyzer-touch\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTS3000B-Touch.png\" alt=\"UNI-T UTS3084B Touch Interface\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eUNI-T UTS3084B 10.1-inch Multi-Touch UI\u003c\/span\u003e\n\u003c\/a\u003e\n\u003ca id=\"lb-uts3084b-8-4ghz-performance-series-spectrum-analyzer-options-emi\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTS3000B-EMI.png\" alt=\"UNI-T UTS3084B EMI Pre-Compliance with UTS-EMI01 Probes\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eUNI-T UTS3084B EMI Pre-Compliance Mode\u003c\/span\u003e\n\u003c\/a\u003e\n\u003ca id=\"lb-uts3084b-8-4ghz-performance-series-spectrum-analyzer-dust\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTS3000B-Dust.png\" alt=\"UNI-T UTS3084B Removable Dust Filter\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eUNI-T UTS3084B User-Removable Dust Filter\u003c\/span\u003e\n\u003c\/a\u003e\n\u003ch2\u003eApplications\u003c\/h2\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch3\u003eRF Design and Validation (sub-8.4 GHz)\u003c\/h3\u003e\n\u003cp\u003eCharacterize transmit spectrum, harmonics, spurious emissions, and channel power across the design workflow — from prototype board bringup through pre-production characterization. The UTS3084B covers 5G NR FR1 (n78\/n77\/n79 and below), sub-6 GHz cellular, Wi-Fi 5\/6 (including Wi-Fi 6E lower band), C-band microwave links, sub-6 GHz radar bands, and broad harmonic-margin coverage for transmitter work up through 4 GHz fundamentals. With the AMK option, ACP and OBW measurements add channel-respect verification for designs targeting tight regulatory band edges.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch3\u003eCommunications and IoT Module Verification\u003c\/h3\u003e\n\u003cp\u003eProduction engineering and incoming-inspection workflows for wireless modules — verify TX power, occupied bandwidth, harmonic emissions, and spurious responses against datasheet specs and regulatory limits. SCPI automation lets you build a repeatable production test station around the analyzer, with pass\/fail logging against limit lines.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch3\u003eEMI Pre-Compliance Investigation\u003c\/h3\u003e\n\u003cp\u003eCatch radiated and conducted emissions issues before sending boards to a full CISPR\/FCC compliance lab. With the \u003ca href=\"\/products\/uts3000b-emi\"\u003eUTS3000-EMI\u003c\/a\u003e option plus the \u003ca href=\"\/products\/uts-emi01-near-field-probe-kit\"\u003eUTS-EMI01 near-field probe kit\u003c\/a\u003e (3 mm to 10 cm probes, 30 MHz – 3 GHz), the UTS3084B becomes a board-level emission hunter — sweep with QP\/AVG\/PEAK detectors, overlay limit lines, and localize hot spots on the PCB before they cost you a failed compliance test.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch3\u003eProduction Test and Quality Control\u003c\/h3\u003e\n\u003cp\u003eSCPI automation over USB or LAN (VXI-11) lets the UTS3084B drop into pyvisa, LabVIEW, or NI-TestStand workflows for repeatable production verification. Run end-of-line tests on transmitter modules, RF amplifier gain stages, oscillator output, or filter assemblies; log pass\/fail results against limit lines; and feed data into MES or QC databases. Six independent traces, max-hold detection, and 40,001-point sweeps give production-engineering teams the trace depth needed to catch intermittent issues that single-sweep tests miss.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch3\u003eRF Service, Repair, and Maintenance\u003c\/h3\u003e\n\u003cp\u003eA capable bench instrument for two-way radio shops, broadcast engineering, antenna service work, and field calibration support. Marker counter functions, harmonic measurements (with AMK), and the touch interface make routine service work quick. The 8.4 GHz ceiling covers commercial broadcast, public-safety and amateur radio, broadcast TV harmonics, and (on 3.6 GHz+ units) sub-6 GHz wireless infrastructure.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eAccessories and Family Options\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eIf you need a tracking generator at 8.4 GHz:\u003c\/strong\u003e the matching SKU is the \u003ca href=\"\/products\/uts3084t-8-4ghz-performance-series-spectrum-analyzer-with-tracking-generator\"\u003e\u003cstrong\u003eUTS3084T\u003c\/strong\u003e\u003c\/a\u003e — same 8.4 GHz analyzer, with an integrated 100 kHz – 6 GHz tracking generator. The UTS3084B chassis does not accept a TG upgrade.\u003c\/p\u003e\n\u003ch3\u003eIncluded with Every Unit\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUTS3000B-series Spectrum Analyzer (UTS3084B)\u003c\/li\u003e\n\u003cli\u003ePower cord\u003c\/li\u003e\n\u003cli\u003eUSB cable (UT-D04)\u003c\/li\u003e\n\u003cli\u003eEnglish download guide\u003c\/li\u003e\n\u003cli\u003eMulti-language safety manual\u003c\/li\u003e\n\u003cli\u003eFactory calibration certificate\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eRecommended Software Options\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/uts3000b-amk\"\u003eUTS3000-AMK\u003c\/a\u003e — Advanced Measurement Kit (channel power, ACP, OBW, CNR, TOI, harmonics, spectrogram)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/uts3000b-ama\"\u003eUTS3000-AMA\u003c\/a\u003e — Analog Demodulation Analysis (AM and FM)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/uts3000b-emi\"\u003eUTS3000-EMI\u003c\/a\u003e — EMI Pre-Compliance (CISPR-aligned QP\/AVG\/PEAK detectors, limit-line analysis)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eRecommended Accessories\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/uts-emi01-near-field-probe-kit\"\u003eUTS-EMI01 Near-Field Probe Kit\u003c\/a\u003e — Four probes (30 MHz – 3 GHz, 3 mm to 10 cm resolution) for PCB-level emission hunting with the UTS3000-EMI option\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/ut-ck01-utility-kit\"\u003eUT-CK01 Utility Kit\u003c\/a\u003e — SMA\/N adapters, cables, and antennas for general RF setup\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/ut-w01-6ghz-n-n-rf-cable\"\u003eUT-W01-6GHz Cable\u003c\/a\u003e — N-to-N RF cable, 0.7 m, DC – 6 GHz\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/ut-w02-6ghz-n-sma-rf-cable\"\u003eUT-W02-6GHz Cable\u003c\/a\u003e — N-to-SMA RF cable, 0.7 m, DC – 6 GHz\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFamily Members\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/uts3021b-2-1ghz-performance-series-spectrum-analyzer\"\u003eUTS3021B\u003c\/a\u003e — 2.1 GHz, TG-upgradeable via UTS3000-TG option\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/uts3036b-3-6ghz-performance-series-spectrum-analyzer\"\u003eUTS3036B\u003c\/a\u003e — 3.6 GHz, TG-upgradeable via UTS3000-TG option\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUTS3084B\u003c\/strong\u003e — 8.4 GHz, no TG \u003cem\u003e(this product)\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/uts3084t-8-4ghz-performance-series-spectrum-analyzer-with-tracking-generator\"\u003eUTS3084T\u003c\/a\u003e — 8.4 GHz with integrated tracking generator\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eWhat's the DANL of the UTS3084B, and what does that mean for my measurements?\u003c\/p\u003e\n\u003cp\u003eThe UTS3084B reaches a typical displayed average noise level of \u003cstrong\u003e-161 dBm\/Hz\u003c\/strong\u003e with the preamp on in the 200 MHz – 1.5 GHz band. Practically: signals down around -120 dBm are visible above the noise floor with reasonable RBW settings (e.g., 1 kHz). For ultimate weak-signal work, narrow the RBW (each 10× reduction drops the noise floor by 10 dB) and enable averaging across multiple sweeps.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eWhy doesn't the UTS3084B support a tracking generator upgrade?\u003c\/p\u003e\n\u003cp\u003eThe UTS3084B chassis is not provisioned for tracking-generator hardware — the TG board and the front-panel TG output connector aren't included in the design. The TG-upgrade option (UTS3000-TG) is only available for the lower-frequency UTS3021B and UTS3036B in this family. If you need 8.4 GHz analyzer coverage with a built-in tracking generator, the matching SKU is the \u003ca href=\"\/products\/uts3084t-8-4ghz-performance-series-spectrum-analyzer-with-tracking-generator\"\u003e\u003cstrong\u003eUTS3084T\u003c\/strong\u003e\u003c\/a\u003e, which includes a 100 kHz – 6 GHz integrated TG. For transmission measurements above 6 GHz, both the UTS3084B and UTS3084T work as receivers with an external swept source.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eHow does the UTS3084B compare to the UTS3000T+ Performance series?\u003c\/p\u003e\n\u003cp\u003eThe UTS3000B\/T family and the newer UTS3000T+ family share core architecture — the same 10.1-inch multi-touch UI, the same 40,001-point sweeps, -161 dBm DANL, and \u0026lt;-98 dBc\/Hz phase noise. The \u003cstrong\u003eUTS3000T+\u003c\/strong\u003e family steps up to typically -164 to -165 dBm DANL, adds features like a waterfall display, peak tables, and VSWR\/return-loss measurement modes, and bundles the tracking generator as standard across all SKUs. For production validation, RF service work, EMI pre-compliance, and IoT\/wireless module verification at the sub-8.4 GHz workload, the UTS3084B is well-matched at a lower price point. For new RF design work where the newer feature set and additional measurement margin matter, the UTS3000T+ family is the active upgrade path within UNI-T's spectrum analyzer lineup.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eWhat software options are available, and what do they add?\u003c\/p\u003e\n\u003cp\u003eThree software options expand the UTS3084B's measurement capabilities: \u003cstrong\u003e\u003ca href=\"\/products\/uts3000b-amk\"\u003eUTS3000-AMK\u003c\/a\u003e\u003c\/strong\u003e (Advanced Measurement Kit) adds channel power, ACP, OBW, time-domain power, CNR, TOI, and harmonic measurements with a spectrogram display. \u003cstrong\u003e\u003ca href=\"\/products\/uts3000b-ama\"\u003eUTS3000-AMA\u003c\/a\u003e\u003c\/strong\u003e adds AM\/FM analog demodulation analysis. \u003cstrong\u003e\u003ca href=\"\/products\/uts3000b-emi\"\u003eUTS3000-EMI\u003c\/a\u003e\u003c\/strong\u003e adds CISPR-aligned EMI pre-compliance with QP\/AVG\/PEAK detectors and limit-line support — it pairs with the optional \u003ca href=\"\/products\/uts-emi01-near-field-probe-kit\"\u003eUTS-EMI01 near-field probe kit\u003c\/a\u003e for PCB-level emission localization.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eIs the UTS3084B suitable for automated test (ATE)?\u003c\/p\u003e\n\u003cp\u003eYes. The UTS3084B accepts standard SCPI commands over USB-Device (USB-B 2.0) and LAN VXI-11 (RJ-45). It drops into pyvisa, LabVIEW, NI-MAX, or any framework that talks to standard test instruments — no proprietary driver layer required beyond a USB or LAN connection. The full SCPI command set is documented in the UTS3000B Programming Manual.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003c\/div\u003e","brand":"UNI-T","offers":[{"title":"Default Title","offer_id":47049681305884,"sku":"181200100020X","price":4719.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UTS3084B_Cables.jpg?v=1720807563"},{"product_id":"uts3084t","title":"UTS3084T 8.4 GHz Spectrum Analyzer with Tracking Generator","description":"\u003ch1\u003eUNI-T UTS3084T 8.4GHz Performance-Series Spectrum Analyzer with Tracking Generator: 8.4 GHz Performance Analyzer with Integrated Tracking Generator\u003c\/h1\u003e\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eUNI-T UTS3084T Performance-Series Spectrum Analyzer\u003c\/strong\u003e covers \u003cstrong\u003e9 kHz – 8.4 GHz\u003c\/strong\u003e with an integrated tracking generator, pairing a 10.1-inch capacitive multi-touch display with a 1 Hz resolution-bandwidth floor and up to 40,001 sweep points. Designed for RF engineers who need both wide frequency coverage and scalar transmission measurements out of the box — pre-compliance EMI work, filter and amplifier characterization, sub-6 GHz cellular and Wi-Fi development, and microwave radio service.\u003c\/p\u003e\n\u003cp\u003eA typical displayed average noise level of \u003cstrong\u003e-161 dBm\/Hz\u003c\/strong\u003e (preamp on) and phase noise of \u003cstrong\u003e\u0026lt;-98 dBc\/Hz\u003c\/strong\u003e at a 10 kHz offset deliver the dynamic range needed for serious signal characterization across the band. The integrated tracking generator covers 100 kHz – 6 GHz, turning the analyzer into a scalar network analyzer for transmission measurements on filters, amplifiers, and antennas. Standard interfaces include HDMI 1.4 display output, USB-A 3.0 (Host), USB-B 2.0 (Device), and Gigabit LAN with full SCPI support.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cdiv class=\"product-key-features\"\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e9 kHz – 8.4 GHz frequency coverage\u003c\/strong\u003e — sub-8.4 GHz for general RF dev, communications, harmonic surveys, and EMI pre-compliance work\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e-161 dBm\/Hz typical DANL\u003c\/strong\u003e (preamp on) — sensitive enough to resolve low-level signals, spurs, and harmonic energy near the noise floor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u0026lt;-98 dBc\/Hz phase noise @ 10 kHz offset\u003c\/strong\u003e (typical, 1 GHz carrier) — clean enough for close-in spectral measurements and modulated-signal analysis\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1 Hz – 3 MHz RBW\u003c\/strong\u003e in 1-3-10 steps — fine resolution control all the way down to a 1 Hz floor, with FFT mode for faster narrowband sweeps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e40,001 sweep points\u003c\/strong\u003e — deep trace detail (4× the count of UNI-T's entry tier) for catching signals that coarser analyzers miss\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e10.1-inch capacitive multi-touch display\u003c\/strong\u003e (1280 × 800) — pinch, drag, and tap to set markers, with full mouse\/keyboard support via USB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSix traces with five detector modes\u003c\/strong\u003e — Sample, Peak, Negative, Normal, Average; Clear\/Write, Average, Max Hold, Min Hold trace types\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated tracking generator\u003c\/strong\u003e (100 kHz – 6 GHz) — built-in scalar network analysis for filter sweeps, amplifier response, and antenna characterization\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull SCPI remote control\u003c\/strong\u003e — over USB-Device (USB-B 2.0) and LAN VXI-11 (10\/100\/1000 Base) for automated test, production lines, and unattended data collection\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOption-extensible\u003c\/strong\u003e — add \u003ca href=\"\/products\/uts3000b-ama\"\u003eUTS3000-AMA\u003c\/a\u003e (analog demodulation), \u003ca href=\"\/products\/uts3000b-amk\"\u003eUTS3000-AMK\u003c\/a\u003e (advanced measurement kit), or \u003ca href=\"\/products\/uts3000b-emi\"\u003eUTS3000-EMI\u003c\/a\u003e (EMI pre-compliance) as your work scope grows\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt to last in working environments\u003c\/strong\u003e — forced-air cooling with a user-removable dust filter to keep the internals clean across years of bench use\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eUNI-T UTS3084T Details\u003c\/h2\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eFrequency Coverage (9 kHz – 8.4 GHz)\u003c\/h3\u003e\n\u003cp\u003eThe UTS3084T sweeps continuously from 9 kHz up to \u003cstrong\u003e8.4 GHz\u003c\/strong\u003e, with 1 Hz frequency resolution and marker counter accuracy on the same order. The 8.4 GHz ceiling reaches well into C-band territory — covering all sub-6 GHz cellular (5G NR FR1, 5 GHz Wi-Fi\/Wi-Fi 6E lower bands), satellite L\/S-band downlinks, microwave point-to-point links, and a generous harmonic margin for 4 GHz transmitter and oscillator work. A 1 Hz frequency reference calibration accuracy with \u0026lt;1 ppm temperature stability keeps measurements steady across the calibration cycle.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-uts3084t-8-4ghz-performance-series-spectrum-analyzer-with-tracking-generator-sweep\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTS3000B-Sweep.png\" alt=\"UNI-T UTS3084T Sweep Display\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eUNI-T UTS3084T 40,001-Point Sweep\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eSensitivity (DANL as low as -161 dBm\/Hz)\u003c\/h3\u003e\n\u003cp\u003eWeak-signal testing depends on how quiet the analyzer itself is. With the preamp on, the UTS3084T reaches a typical displayed average noise level of \u003cstrong\u003e-161 dBm\/Hz\u003c\/strong\u003e in the 200 MHz – 1.5 GHz band — low enough to resolve faint emissions, identify harmonic energy well below the carrier, and characterize signals near the noise floor. Five detector modes (Sample, Peak, Negative, Normal, Average) and four trace types give you the flexibility to tune what the trace shows for any measurement context. A switchable 20 dB preamp adds gain when you need it, and the input attenuator adjusts in 1 dB steps from 0 to 51 dB.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-uts3084t-8-4ghz-performance-series-spectrum-analyzer-with-tracking-generator-sensitivity\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTS3000B-Sensitivity.png\" alt=\"UNI-T UTS3084T Sensitivity\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eUNI-T UTS3084T -161 dBm\/Hz DANL\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch3\u003ePhase Noise (\u0026lt;-98 dBc\/Hz at 10 kHz offset)\u003c\/h3\u003e\n\u003cp\u003eClean local-oscillator performance matters when you're working close to a strong carrier — modulated signal analysis, narrowband interference identification, or oscillator-quality measurement. With \u003cstrong\u003etypical phase noise of \u0026lt;-98 dBc\/Hz at a 10 kHz offset\u003c\/strong\u003e from a 1 GHz carrier (measured with a 1 kHz RBW and 10 Hz VBW), the UTS3084T resolves close-in spectral content without the phase noise pedestal washing it out. Typical performance at a 1 MHz offset is in the -112 to -116 dBc\/Hz range — well-suited for general modulated-signal and oscillator work.\u003c\/p\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003e1 Hz – 3 MHz Resolution Bandwidth\u003c\/h3\u003e\n\u003cp\u003eResolution bandwidth in 1-3-10 steps, from 1 Hz all the way to \u003cstrong\u003e3 MHz\u003c\/strong\u003e, gives you the right sweep speed \/ selectivity trade-off for any measurement. Drop the RBW to 1 Hz to separate signals closer together in frequency than most mid-tier analyzers can manage; widen it for fast high-level surveys. Bandwidth accuracy holds within 5% nominal, and switching between resolution settings introduces only ±0.2 dB relative amplitude uncertainty. The shape factor (-60 dB \/ -3 dB ratio) is \u0026lt;4.8:1 nominal — tight skirts that help you separate close-in signals of unequal amplitude. FFT sweep mode is also available for faster narrowband measurements.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-uts3084t-8-4ghz-performance-series-spectrum-analyzer-with-tracking-generator-selectivity\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTS3000B-Selectivity.png\" alt=\"UNI-T UTS3084T Selectivity\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eUNI-T UTS3084T RBW Selectivity\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch3\u003e40,001 Sweep Points\u003c\/h3\u003e\n\u003cp\u003eMore points across a trace means finer frequency resolution per pixel and a much better chance of catching signals that fall between coarser bins. The UTS3084T provides up to \u003cstrong\u003e40,001 sweep points per trace\u003c\/strong\u003e — four times the count of UNI-T's entry-tier UTS1000B series, and high enough to clearly distinguish closely-spaced signals, identify intermittent emissions, and read marker frequencies with confidence. Combined with six independent traces, you can simultaneously display raw, max-hold, min-hold, and averaged versions of the same span.\u003c\/p\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003e10.1-inch Multi-Touch Interface\u003c\/h3\u003e\n\u003cp\u003eThe UTS3084T uses a 10.1-inch capacitive multi-touch display (1280 × 800 HD resolution) for direct interaction with traces, markers, and menus. Pinch, drag, and zoom directly on the trace; set markers by tapping where you want them; navigate menus the way you'd expect on a modern tablet. For lab environments where a USB mouse or keyboard is more practical, the UTS3084T accepts those through the USB Host port. The touch UI cuts measurement setup time noticeably on day-to-day bench work — especially when you're repeatedly adjusting span, RBW, and marker positions across many sweeps.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-uts3084t-8-4ghz-performance-series-spectrum-analyzer-with-tracking-generator-touch\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTS3000B-Touch.png\" alt=\"UNI-T UTS3084T Touch Interface\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eUNI-T UTS3084T 10.1-inch Multi-Touch UI\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch3\u003eMarker Suite (4 Markers, 5 Functions)\u003c\/h3\u003e\n\u003cp\u003eFour markers with three modes (Normal, Delta, Fixed) cover the basic measurement vocabulary — reading absolute level, computing delta between two points, locking a marker to a frequency for sweep-to-sweep comparison. Five built-in marker functions go further: \u003cstrong\u003eMarker Noise\u003c\/strong\u003e reads noise density in dBm\/Hz at the marker, \u003cstrong\u003eBand Power\u003c\/strong\u003e integrates total power over a user-defined band, \u003cstrong\u003eBand Density\u003c\/strong\u003e reports power per Hz across that band, \u003cstrong\u003eN dB\u003c\/strong\u003e auto-finds the points N dB down from a peak (useful for measuring -3 dB or -6 dB bandwidths), and \u003cstrong\u003eCounter\u003c\/strong\u003e reads frequency to 1 Hz resolution.\u003c\/p\u003e\n\u003ch3\u003eConnectivity (HDMI, USB, LAN, 10 MHz Ref)\u003c\/h3\u003e\n\u003cp\u003eA full set of standard rear-panel interfaces makes the UTS3084T easy to fit into any workflow:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRF Input:\u003c\/strong\u003e Type-N female, 50 Ω\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHDMI 1.4 display output\u003c\/strong\u003e — mirror the trace to an external monitor for shared review or training\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB-A 3.0 Host\u003c\/strong\u003e + \u003cstrong\u003eUSB-B 2.0 Device\u003c\/strong\u003e — thumb drive, mouse\/keyboard, and SCPI over USB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLAN VXI-11 (10\/100\/1000 Base, RJ-45)\u003c\/strong\u003e — networked remote control\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e10 MHz reference in\/out\u003c\/strong\u003e (BNC) — lock to an external timebase or share the internal reference\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExternal trigger input\u003c\/strong\u003e (TTL, BNC, rising\/falling edge)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSCPI Remote Control for Automated Test\u003c\/h3\u003e\n\u003cp\u003eThe UTS3084T responds to industry-standard SCPI commands over both USB-Device (USB-B 2.0) and LAN VXI-11 (RJ-45). That means it drops cleanly into pyvisa, LabVIEW, NI-MAX, or any other test framework that talks to standard instruments — no proprietary protocol layer to learn, no special drivers beyond a USB or LAN connection. Whether you're building a production test rig, automating a parametric sweep across DUTs, or running unattended overnight data collection, the interface scales the same way the rest of the bench does. The full SCPI command set is documented in the UTS3000B Programming Manual.\u003c\/p\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eIntegrated Tracking Generator (100 kHz – 6 GHz)\u003c\/h3\u003e\n\u003cp\u003eThe UTS3084T includes a built-in tracking generator producing a synchronized swept output matched to the analyzer's receive frequency — effectively turning the instrument into a scalar network analyzer for transmission measurements. Sweep filters, amplifiers, and matching networks directly, with output power adjustable from -40 dBm to 0 dBm in 0.5 dB steps and ±3 dB flatness relative to 50 MHz. The TG output uses a separate front-panel Type-N female 50 Ω connector.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOne honest note on the TG range:\u003c\/strong\u003e The integrated TG covers \u003cstrong\u003e100 kHz – 6 GHz\u003c\/strong\u003e, while the analyzer measures up to 8.4 GHz. The TG is designed for the sub-6 GHz workload (5G NR FR1, all cellular, Wi-Fi, sub-6 GHz radar, satellite L\/S-band). For transmission measurements between 6 GHz and 8.4 GHz, the analyzer still works as a receiver with an external swept source.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-uts3084t-8-4ghz-performance-series-spectrum-analyzer-with-tracking-generator-tg\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTS3000B-Sweep-2.png\" alt=\"UNI-T UTS3084T Tracking Generator Output\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eUNI-T UTS3084T TG Scalar Network Sweep\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eSoftware Options for Specialized Measurements\u003c\/h3\u003e\n\u003cp\u003eThe UTS3084T starts as a capable general-purpose spectrum analyzer and grows into specialized roles through software options — the instrument hardware is the same; the options unlock measurement modes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/products\/uts3000b-amk\"\u003eUTS3000-AMK\u003c\/a\u003e (Advanced Measurement Kit)\u003c\/strong\u003e — adds channel power, adjacent channel power (ACP), occupied bandwidth (OBW), time-domain power, carrier-to-noise ratio (CNR), third-order intercept (TOI), and harmonic measurements (up to the 10th harmonic), plus a spectrogram display for time-history visualization\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/products\/uts3000b-ama\"\u003eUTS3000-AMA\u003c\/a\u003e (Analog Demodulation)\u003c\/strong\u003e — AM and FM demodulation analysis with modulation rate, depth, and frequency offset measurements (20 Hz – 100 kHz modulation rate range)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/products\/uts3000b-emi\"\u003eUTS3000-EMI\u003c\/a\u003e (EMI Pre-Compliance)\u003c\/strong\u003e — CISPR-aligned QP\/AVG\/PEAK detectors, EMI band sweep, and limit-line analysis. Pairs with the optional \u003ca href=\"\/products\/uts-emi01-near-field-probe-kit\"\u003eUTS-EMI01 near-field probe kit\u003c\/a\u003e (3 mm to 10 cm probes, 30 MHz – 3 GHz) for board-level emission hunting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-uts3084t-8-4ghz-performance-series-spectrum-analyzer-with-tracking-generator-options-emi\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTS3000B-EMI.png\" alt=\"UNI-T UTS3084T EMI Pre-Compliance with UTS-EMI01 Probes\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eUNI-T UTS3084T EMI Pre-Compliance Mode\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eBuilt for Working Lab Environments\u003c\/h3\u003e\n\u003cp\u003eA spectrum analyzer that lives next to soldering stations, drilling, and general bench work will breathe in dust over time. The UTS3084T addresses this with forced-air cooling and a \u003cstrong\u003euser-removable dust filter\u003c\/strong\u003e — pop it out, vacuum or blow it off, and slide it back. No tools, no service-center trip, no fan failures from dust accumulation. Operating range is 0 °C to +40 °C, storage to -20 °C \/ +70 °C, with full ±1 ppm timebase stability across the operational temperature range. The full IEC 61326 EMC compliance and EN 61010 safety qualification (with cETLus mark) round out a unit built to hold up across years of bench use.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-uts3084t-8-4ghz-performance-series-spectrum-analyzer-with-tracking-generator-dust\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTS3000B-Dust.png\" alt=\"UNI-T UTS3084T Removable Dust Filter\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eUNI-T UTS3084T User-Removable Dust Filter\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ca id=\"lb-uts3084t-8-4ghz-performance-series-spectrum-analyzer-with-tracking-generator-sweep\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTS3000B-Sweep.png\" alt=\"UNI-T UTS3084T Sweep Display\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eUNI-T UTS3084T 40,001-Point Sweep\u003c\/span\u003e\n\u003c\/a\u003e\n\u003ca id=\"lb-uts3084t-8-4ghz-performance-series-spectrum-analyzer-with-tracking-generator-sensitivity\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTS3000B-Sensitivity.png\" alt=\"UNI-T UTS3084T Sensitivity\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eUNI-T UTS3084T -161 dBm\/Hz DANL\u003c\/span\u003e\n\u003c\/a\u003e\n\u003ca id=\"lb-uts3084t-8-4ghz-performance-series-spectrum-analyzer-with-tracking-generator-selectivity\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTS3000B-Selectivity.png\" alt=\"UNI-T UTS3084T Selectivity\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eUNI-T UTS3084T RBW Selectivity\u003c\/span\u003e\n\u003c\/a\u003e\n\u003ca id=\"lb-uts3084t-8-4ghz-performance-series-spectrum-analyzer-with-tracking-generator-touch\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTS3000B-Touch.png\" alt=\"UNI-T UTS3084T Touch Interface\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eUNI-T UTS3084T 10.1-inch Multi-Touch UI\u003c\/span\u003e\n\u003c\/a\u003e\n\u003ca id=\"lb-uts3084t-8-4ghz-performance-series-spectrum-analyzer-with-tracking-generator-tg\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTS3000B-Sweep-2.png\" alt=\"UNI-T UTS3084T Tracking Generator Output\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eUNI-T UTS3084T TG Scalar Network Sweep\u003c\/span\u003e\n\u003c\/a\u003e\n\u003ca id=\"lb-uts3084t-8-4ghz-performance-series-spectrum-analyzer-with-tracking-generator-options-emi\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTS3000B-EMI.png\" alt=\"UNI-T UTS3084T EMI Pre-Compliance with UTS-EMI01 Probes\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eUNI-T UTS3084T EMI Pre-Compliance Mode\u003c\/span\u003e\n\u003c\/a\u003e\n\u003ca id=\"lb-uts3084t-8-4ghz-performance-series-spectrum-analyzer-with-tracking-generator-dust\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTS3000B-Dust.png\" alt=\"UNI-T UTS3084T Removable Dust Filter\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eUNI-T UTS3084T User-Removable Dust Filter\u003c\/span\u003e\n\u003c\/a\u003e\n\u003ch2\u003eApplications\u003c\/h2\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch3\u003eRF Design and Validation (sub-8.4 GHz)\u003c\/h3\u003e\n\u003cp\u003eCharacterize transmit spectrum, harmonics, spurious emissions, and channel power across the design workflow — from prototype board bringup through pre-production characterization. The UTS3084T covers 5G NR FR1 (n78\/n77\/n79 and below), sub-6 GHz cellular, Wi-Fi 5\/6 (including Wi-Fi 6E lower band), C-band microwave links, sub-6 GHz radar bands, and broad harmonic-margin coverage for transmitter work up through 4 GHz fundamentals. With the AMK option, ACP and OBW measurements add channel-respect verification for designs targeting tight regulatory band edges.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch3\u003eCommunications and IoT Module Verification\u003c\/h3\u003e\n\u003cp\u003eProduction engineering and incoming-inspection workflows for wireless modules — verify TX power, occupied bandwidth, harmonic emissions, and spurious responses against datasheet specs and regulatory limits. SCPI automation lets you build a repeatable production test station around the analyzer, with pass\/fail logging against limit lines.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch3\u003eEMI Pre-Compliance Investigation\u003c\/h3\u003e\n\u003cp\u003eCatch radiated and conducted emissions issues before sending boards to a full CISPR\/FCC compliance lab. With the \u003ca href=\"\/products\/uts3000b-emi\"\u003eUTS3000-EMI\u003c\/a\u003e option plus the \u003ca href=\"\/products\/uts-emi01-near-field-probe-kit\"\u003eUTS-EMI01 near-field probe kit\u003c\/a\u003e (3 mm to 10 cm probes, 30 MHz – 3 GHz), the UTS3084T becomes a board-level emission hunter — sweep with QP\/AVG\/PEAK detectors, overlay limit lines, and localize hot spots on the PCB before they cost you a failed compliance test.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch3\u003eFilter and Component Characterization\u003c\/h3\u003e\n\u003cp\u003eThe integrated tracking generator opens up scalar transmission measurements: insertion loss, gain, frequency response, and stopband rejection on filters, amplifiers, attenuators, and antennas. Sweep across \u003cstrong\u003e100 kHz – 6 GHz\u003c\/strong\u003e and read the response directly on the analyzer trace. Add a directional coupler for return-loss measurements on antennas and matching networks.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch3\u003eProduction Test and Quality Control\u003c\/h3\u003e\n\u003cp\u003eSCPI automation over USB or LAN (VXI-11) lets the UTS3084T drop into pyvisa, LabVIEW, or NI-TestStand workflows for repeatable production verification. Run end-of-line tests on transmitter modules, RF amplifier gain stages, oscillator output, or filter assemblies; log pass\/fail results against limit lines; and feed data into MES or QC databases. Six independent traces, max-hold detection, and 40,001-point sweeps give production-engineering teams the trace depth needed to catch intermittent issues that single-sweep tests miss.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch3\u003eRF Service, Repair, and Maintenance\u003c\/h3\u003e\n\u003cp\u003eA capable bench instrument for two-way radio shops, broadcast engineering, antenna service work, and field calibration support. Marker counter functions, harmonic measurements (with AMK), and the touch interface make routine service work quick. The 8.4 GHz ceiling covers commercial broadcast, public-safety and amateur radio, broadcast TV harmonics, and (on 3.6 GHz+ units) sub-6 GHz wireless infrastructure.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eAccessories and Family Options\u003c\/h2\u003e\n\u003ch3\u003eIncluded with Every Unit\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUTS3000B-series Spectrum Analyzer (UTS3084T)\u003c\/li\u003e\n\u003cli\u003ePower cord\u003c\/li\u003e\n\u003cli\u003eUSB cable (UT-D04)\u003c\/li\u003e\n\u003cli\u003eEnglish download guide\u003c\/li\u003e\n\u003cli\u003eMulti-language safety manual\u003c\/li\u003e\n\u003cli\u003eFactory calibration certificate\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eRecommended Software Options\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/uts3000b-amk\"\u003eUTS3000-AMK\u003c\/a\u003e — Advanced Measurement Kit (channel power, ACP, OBW, CNR, TOI, harmonics, spectrogram)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/uts3000b-ama\"\u003eUTS3000-AMA\u003c\/a\u003e — Analog Demodulation Analysis (AM and FM)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/uts3000b-emi\"\u003eUTS3000-EMI\u003c\/a\u003e — EMI Pre-Compliance (CISPR-aligned QP\/AVG\/PEAK detectors, limit-line analysis)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eRecommended Accessories\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/uts-emi01-near-field-probe-kit\"\u003eUTS-EMI01 Near-Field Probe Kit\u003c\/a\u003e — Four probes (30 MHz – 3 GHz, 3 mm to 10 cm resolution) for PCB-level emission hunting with the UTS3000-EMI option\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/ut-ck01-utility-kit\"\u003eUT-CK01 Utility Kit\u003c\/a\u003e — SMA\/N adapters, cables, and antennas for general RF setup\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/ut-w01-6ghz-n-n-rf-cable\"\u003eUT-W01-6GHz Cable\u003c\/a\u003e — N-to-N RF cable, 0.7 m, DC – 6 GHz\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/ut-w02-6ghz-n-sma-rf-cable\"\u003eUT-W02-6GHz Cable\u003c\/a\u003e — N-to-SMA RF cable, 0.7 m, DC – 6 GHz\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFamily Members\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/uts3021b-2-1ghz-performance-series-spectrum-analyzer\"\u003eUTS3021B\u003c\/a\u003e — 2.1 GHz, TG-upgradeable via UTS3000-TG option\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/uts3036b-3-6ghz-performance-series-spectrum-analyzer\"\u003eUTS3036B\u003c\/a\u003e — 3.6 GHz, TG-upgradeable via UTS3000-TG option\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/uts3084b-8-4ghz-performance-series-spectrum-analyzer\"\u003eUTS3084B\u003c\/a\u003e — 8.4 GHz, no TG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUTS3084T\u003c\/strong\u003e — 8.4 GHz with integrated tracking generator \u003cem\u003e(this product)\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eWhat's the DANL of the UTS3084T, and what does that mean for my measurements?\u003c\/p\u003e\n\u003cp\u003eThe UTS3084T reaches a typical displayed average noise level of \u003cstrong\u003e-161 dBm\/Hz\u003c\/strong\u003e with the preamp on in the 200 MHz – 1.5 GHz band. Practically: signals down around -120 dBm are visible above the noise floor with reasonable RBW settings (e.g., 1 kHz). For ultimate weak-signal work, narrow the RBW (each 10× reduction drops the noise floor by 10 dB) and enable averaging across multiple sweeps.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eWhat can I measure with the integrated tracking generator?\u003c\/p\u003e\n\u003cp\u003eThe integrated TG generates a swept output that follows the analyzer's receive frequency from \u003cstrong\u003e100 kHz – 6 GHz\u003c\/strong\u003e, with output power adjustable from -40 dBm to 0 dBm in 0.5 dB steps. You can sweep filters (insertion loss, frequency response, bandwidth), amplifiers (gain, frequency response), passive networks (return loss with a directional coupler), and antennas. The TG output uses a separate front-panel Type-N connector so it can stay cabled to your DUT input. Note: the TG covers 100 kHz – 6 GHz; the analyzer itself reaches 8.4 GHz, but transmission measurements between 6 GHz and 8.4 GHz require an external swept source.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eHow does the UTS3084T compare to the UTS3000T+ Performance series?\u003c\/p\u003e\n\u003cp\u003eThe UTS3000B\/T family and the newer UTS3000T+ family share core architecture — the same 10.1-inch multi-touch UI, the same 40,001-point sweeps, -161 dBm DANL, and \u0026lt;-98 dBc\/Hz phase noise. The \u003cstrong\u003eUTS3000T+\u003c\/strong\u003e family steps up to typically -164 to -165 dBm DANL, adds features like a waterfall display, peak tables, and VSWR\/return-loss measurement modes, and bundles the tracking generator as standard across all SKUs. For production validation, RF service work, EMI pre-compliance, and IoT\/wireless module verification at the sub-8.4 GHz workload, the UTS3084T is well-matched at a lower price point. For new RF design work where the newer feature set and additional measurement margin matter, the UTS3000T+ family is the active upgrade path within UNI-T's spectrum analyzer lineup.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eWhat software options are available, and what do they add?\u003c\/p\u003e\n\u003cp\u003eThree software options expand the UTS3084T's measurement capabilities: \u003cstrong\u003e\u003ca href=\"\/products\/uts3000b-amk\"\u003eUTS3000-AMK\u003c\/a\u003e\u003c\/strong\u003e (Advanced Measurement Kit) adds channel power, ACP, OBW, time-domain power, CNR, TOI, and harmonic measurements with a spectrogram display. \u003cstrong\u003e\u003ca href=\"\/products\/uts3000b-ama\"\u003eUTS3000-AMA\u003c\/a\u003e\u003c\/strong\u003e adds AM\/FM analog demodulation analysis. \u003cstrong\u003e\u003ca href=\"\/products\/uts3000b-emi\"\u003eUTS3000-EMI\u003c\/a\u003e\u003c\/strong\u003e adds CISPR-aligned EMI pre-compliance with QP\/AVG\/PEAK detectors and limit-line support — it pairs with the optional \u003ca href=\"\/products\/uts-emi01-near-field-probe-kit\"\u003eUTS-EMI01 near-field probe kit\u003c\/a\u003e for PCB-level emission localization.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eIs the UTS3084T suitable for automated test (ATE)?\u003c\/p\u003e\n\u003cp\u003eYes. The UTS3084T accepts standard SCPI commands over USB-Device (USB-B 2.0) and LAN VXI-11 (RJ-45). It drops into pyvisa, LabVIEW, NI-MAX, or any framework that talks to standard test instruments — no proprietary driver layer required beyond a USB or LAN connection. The full SCPI command set is documented in the UTS3000B Programming Manual.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003c\/div\u003e","brand":"UNI-T","offers":[{"title":"Default Title","offer_id":47049681830172,"sku":"181200100019X","price":5519.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UTS3084T_Cables.jpg?v=1720807573"},{"product_id":"utg9504t","title":"UTG9504T 500 MHz 4Ch Elite-Series Arbitrary Waveform Generator","description":"\u003ch1\u003eUNI-T UTG9504T 500 MHz 4-Channel Elite-Series Arbitrary Waveform Generator: 2.5 GSa\/s, Touch Display\u003c\/h1\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eUNI-T UTG9504T\u003c\/strong\u003e is a four-channel arbitrary waveform generator built on a 2 Main + 2 AUX channel architecture. The two Main channels (CH1, CH2) output to 500 MHz sine at a 2.5 GSa\/s sample rate with a 14-bit vertical-resolution DAC; the two AUX channels (CH3, CH4) provide additional independent outputs to 200 MHz at 625 MSa\/s and 16-bit resolution. An 8 pts to 64 Mpts per-Main-channel arbitrary memory and 16 GB of internal file storage support long-form custom stimulus. A 10.1-inch capacitive touch display replaces menu-driven navigation with direct parameter manipulation.\u003c\/p\u003e\n\u003cp\u003e160 MHz square \/ pulse on the Main channels, 1 µHz frequency resolution across the full range, total harmonic distortion of 0.075% (DC to 20 kHz), and an 800 MHz hardware frequency counter. Fifteen analog and digital modulation types — including 3FSK, 4FSK, QAM, and the full BPSK \/ QPSK \/ OSK set. Linear, logarithmic, step, and list sweep. Three burst modes. Advanced Multi-Pulse, Multi-Tone, Sequence, Pattern, I\/Q, and Expression functions. Over 200 built-in arbitrary waveforms with SPI \/ I²C \/ UART digital-protocol output.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eChoosing Your Model — UTG9000T Elite-Series\u003c\/h2\u003e\n\u003cp\u003eThree four-channel models share the same 2 Main + 2 AUX architecture, the same modulation set, advanced functions, interfaces, and chassis. They differ on two axes: maximum Main-channel output frequency, and — at the top of the range — Main-channel vertical resolution.\u003c\/p\u003e\n\u003ctable class=\"product-spec-table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eUTG9354T\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e350 MHz Main sine \/ 120 MHz Main square \u0026amp; pulse, 14-bit Main-channel DAC — the entry point to the Elite series for VHF\/UHF stimulus and digital work.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eUTG9504T\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e500 MHz Main sine \/ 160 MHz Main square \u0026amp; pulse, 14-bit Main-channel DAC — added frequency headroom for higher-band RF and high-speed digital work. \u003cstrong\u003e(this product)\u003c\/strong\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eUTG9604T\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e600 MHz Main sine \/ 200 MHz Main square \u0026amp; pulse, \u003cstrong\u003e16-bit\u003c\/strong\u003e Main-channel DAC — the widest frequency envelope \u003cem\u003eand\u003c\/em\u003e the highest Main-channel vertical resolution in the series, for the most demanding amplitude-fidelity and signal-frequency requirements.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003eOn all three models the two AUX channels (CH3\/CH4) run at 16-bit resolution and 625 MSa\/s; the resolution difference above applies to the Main channels (CH1\/CH2). This page describes the \u003cstrong\u003eUTG9504T\u003c\/strong\u003e — the Specifications table below lists this model's figures.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cdiv class=\"product-key-features\"\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e500 MHz Main sine \/ 160 MHz Main square \u0026amp; pulse\u003c\/strong\u003e — 2 Main + 2 AUX channels, 1 µHz frequency resolution.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e14-bit Main-channel DAC\u003c\/strong\u003e — CH1\/CH2 at 2.5 GSa\/s; CH3\/CH4 AUX at 16-bit \/ 625 MSa\/s.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e8 pts to 64 Mpts arbitrary memory\u003c\/strong\u003e — per Main channel, 200+ non-volatile built-ins, 16 GB internal file storage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTHD 0.075%\u003c\/strong\u003e — low distortion with high SNR and a one-click SNR overlay for signal-to-noise testing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e15 modulation types\u003c\/strong\u003e — AM, FM, PM, DSB-AM, ASK, FSK, PSK, 3FSK, 4FSK, BPSK, QPSK, OSK, SUM, QAM, PWM.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdvanced functions\u003c\/strong\u003e — Multi-Pulse, Multi-Tone, Sequence, Pattern, I\/Q, and Expression-based generation built in.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePRBS PN3 to PN33\u003c\/strong\u003e — with adjustable bit rate and edge time for serial-link and jitter-tolerance test.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDigital-protocol output\u003c\/strong\u003e — SPI, I²C, and UART driven directly from the instrument.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e800 MHz hardware frequency counter\u003c\/strong\u003e — 100 mHz to 800 MHz, 8-digit, AC \/ DC coupling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e10.1-inch capacitive touch display\u003c\/strong\u003e — 1280 × 800; direct parameter manipulation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB Host\/Device, LAN\u003c\/strong\u003e — 10 MHz reference in\/out, external trigger; full remote-control integration.\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eUNI-T UTG9504T Details\u003c\/h2\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eFour-Channel Architecture: 2 Main + 2 AUX\u003c\/h3\u003e\n\u003cp\u003eThe instrument provides four output channels in a Main \/ AUX architecture. The two Main channels (CH1, CH2) carry the full output frequency and the model's main-channel vertical resolution; the two AUX channels (CH3, CH4) provide additional independent outputs to 200 MHz (160 MHz on the 350 model) at 625 MSa\/s and 16-bit resolution. All four run independently, so a single instrument can drive a primary stimulus pair plus two auxiliary clock or reference signals.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-utg9504t-500mhz-4ch-elite-series-arbitrary-waveform-generator-fourch\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTG9000T_Four_Channel_Display.png\" alt=\"UTG9504T four-channel architecture: 2 main + 2 aux\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eFour-channel display — 2 Main (full frequency) + 2 AUX channels.\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-utg9504t-500mhz-4ch-elite-series-arbitrary-waveform-generator-couple\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTG9000T_Channel_Coupling.png\" alt=\"UTG9504T channel coupling and merging\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eFrequency \/ amplitude \/ phase coupling across channels.\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003ch3\u003eChannel Coupling and Merging\u003c\/h3\u003e\n\u003cp\u003eChannels can be coupled with configurable frequency, amplitude, and phase relationships so a parameter change on one channel propagates to its coupled partners by a defined ratio and offset. Outputs can also be merged into arbitrary combinations — for example CH1 = CH1 + CH2 + CH3 + CH4 — producing summed and composite signals from a single instrument without external combiners.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eMulti-Channel Merging for Composite Signals\u003c\/h3\u003e\n\u003cp\u003eChannel merging combines any selection of the four outputs into a single composite waveform, summing channels in arbitrary configurations. This synthesizes layered test signals — carrier plus interferer, signal plus controlled noise, or multi-component stimulus — directly from the instrument with no external summing hardware.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-utg9504t-500mhz-4ch-elite-series-arbitrary-waveform-generator-merge\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTG9000T_Channel_Merging.png\" alt=\"UTG9504T multi-channel merging for composite signals\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eChannel merging — arbitrary combinations into one composite output.\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-utg9504t-500mhz-4ch-elite-series-arbitrary-waveform-generator-arb\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTG9000T_Arbitrary_Wave.png\" alt=\"UTG9504T arbitrary waveforms and built-in editor\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003e8 pts to 64 Mpts arbitrary, 200+ built-in, 16 GB file storage.\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003ch3\u003eArbitrary Waveforms and Built-In Editor\u003c\/h3\u003e\n\u003cp\u003ePoint-by-point arbitrary output spans 8 pts to 64 Mpts on the Main channels with over 200 non-volatile built-in waveforms and 16 GB of internal storage for .bsv\/.csv files. The built-in editor supports manual drawing, line drawing, and expression-based generation, and also runs on a PC over USB or LAN for large waveform construction.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003e15 Modulation Types in One Instrument\u003c\/h3\u003e\n\u003cp\u003eFifteen analog and digital modulation schemes are built in: AM, FM, PM, DSB-AM, ASK, FSK, PSK, 3FSK, 4FSK, BPSK, QPSK, OSK, SUM, QAM, and PWM. Each channel supports independent or simultaneous internal\/external modulation and internal\/external\/manual triggering, alongside Linear\/Logarithmic\/Step\/List frequency sweep and N-cycle\/gate\/infinite burst.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-utg9504t-500mhz-4ch-elite-series-arbitrary-waveform-generator-mod\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTG9000T_Multiple_Modulation_Mode.png\" alt=\"UTG9504T 15 modulation types in one instrument\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eFifteen modulation types — analog and digital — plus sweep and burst.\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-utg9504t-500mhz-4ch-elite-series-arbitrary-waveform-generator-sweep\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTG9000T_Sweep_Frequency.png\" alt=\"UTG9504T sweep, prbs, and pseudo-random sequences\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eLinear \/ log \/ step \/ list sweep; PRBS PN3 to PN33.\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003ch3\u003eSweep, PRBS, and Pseudo-Random Sequences\u003c\/h3\u003e\n\u003cp\u003eLinear, logarithmic, step, and list frequency sweep cover stimulus-response and frequency-characterization work. Pseudo-random binary sequence output runs PN3 through PN33 patterns with adjustable bit rate and edge time for serial-link, jitter-tolerance, and bit-error-rate testing directly from the generator.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eDigital-Protocol Output: SPI, I²C, UART\u003c\/h3\u003e\n\u003cp\u003eBuilt-in digital-protocol output drives SPI, I²C, and UART buses directly. SPI and I²C run a 1 Hz to 50 MHz clock with configurable data depth; UART supports custom baud rates with adjustable data, stop, and parity bits — useful for stimulating and emulating embedded serial peripherals without a separate protocol generator.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-utg9504t-500mhz-4ch-elite-series-arbitrary-waveform-generator-digital\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTG9000T_Digital_Protocol_Output.png\" alt=\"UTG9504T digital-protocol output: spi, i²c, uart\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eSPI, I²C, and UART protocol output built in.\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-utg9504t-500mhz-4ch-elite-series-arbitrary-waveform-generator-counter\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTG9000T_One-button_SNR.png\" alt=\"UTG9504T one-click snr and 800 mhz frequency counter\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eOne-click SNR overlay; 100 mHz to 800 MHz, 8-digit counter.\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003ch3\u003eOne-Click SNR and 800 MHz Frequency Counter\u003c\/h3\u003e\n\u003cp\u003eOne-click SNR output applies a calibrated noise overlay to a clean carrier for fast signal-to-noise and receiver-sensitivity testing. A high-precision hardware frequency counter measures 100 mHz to 800 MHz with 8-digit resolution and AC\/DC coupling, so frequency, period, and duty-ratio measurements run on the same instrument.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eApplications\u003c\/h2\u003e\n\u003cp\u003eThe UTG9504T envelope — 2 Main + 2 AUX channels, 2.5 GSa\/s Main sampling, 14-bit Main-channel resolution, 64 Mpts per Main channel, THD 0.075%, 15-type modulation, and the full advanced-function set — targets benchtop work needing genuine multi-channel stimulus, deep arbitrary support, or wide modulation coverage.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-channel embedded and RF development\u003c\/strong\u003e — two Main channels drive primary stimulus while two AUX channels supply clock or reference signals, all from one instrument.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRF and communications stimulus\u003c\/strong\u003e — 3FSK, 4FSK, BPSK, QPSK, OSK, QAM digital modulation and SUM \/ DSB-AM analog modulation across the Main-channel output range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-speed digital and serial-link test\u003c\/strong\u003e — fast Main-channel edges, PRBS PN3 to PN33, and SPI \/ I²C \/ UART protocol output for interface and jitter-tolerance work.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAudio and instrumentation testing\u003c\/strong\u003e — THD 0.075% from DC to 20 kHz when characterizing op-amp distortion, ADC noise floors, and audio-band response.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLong-form arbitrary playback\u003c\/strong\u003e — up to 64 Mpts per Main channel holds extended protocol streams and complex composite waveforms; 16 GB internal file storage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eI\/Q and modulated-carrier work\u003c\/strong\u003e — baseband I\/Q generation for communication-system verification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomated test (ATE)\u003c\/strong\u003e — LAN\/USB remote control and instrument-manager software for synchronized benches.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eAccessories and Family Options\u003c\/h2\u003e\n\u003ch3\u003eIncluded with Every Unit\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePower cord conforming to destination country standard\u003c\/li\u003e\n\u003cli\u003eUSB data cable (UT-D14)\u003c\/li\u003e\n\u003cli\u003eBNC-to-BNC cable × 4 (UT-L45)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFamily Members\u003c\/h3\u003e\n\u003cp\u003eThe UTG9000T Elite-Series consists of three four-channel models sharing the same 2 Main + 2 AUX architecture, modulation set, advanced functions, and chassis:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUTG9354T\u003c\/strong\u003e — 350 MHz Main sine, 14-bit Main DAC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUTG9504T\u003c\/strong\u003e — 500 MHz Main sine, 14-bit Main DAC (this product)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUTG9604T\u003c\/strong\u003e — 600 MHz Main sine, 16-bit Main DAC\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eWhat is the difference between the three UTG9000T models?\u003c\/p\u003e\n\u003cp\u003eAll three share the same 2 Main + 2 AUX channel architecture, modulation set, advanced functions, interfaces, and chassis. They differ in Main-channel maximum frequency — 350 MHz (UTG9354T), 500 MHz (UTG9504T), 600 MHz (UTG9604T) sine — and in Main-channel vertical resolution: the UTG9604T has a 16-bit Main-channel DAC, while the UTG9354T and UTG9504T use a 14-bit Main-channel DAC. All three run 16-bit on the AUX channels. Choose by the highest Main-channel frequency your work requires, and select the UTG9604T when 16-bit Main-channel amplitude fidelity matters.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eWhat is the difference between the Main and AUX channels?\u003c\/p\u003e\n\u003cp\u003eThe two Main channels (CH1, CH2) carry the model's full output frequency at a 2.5 GSa\/s sample rate and the model's Main-channel resolution. The two AUX channels (CH3, CH4) are independent additional outputs running to 200 MHz (160 MHz on the 350 model) at 625 MSa\/s and 16-bit resolution — suited to clock, reference, and secondary-stimulus roles alongside the Main pair.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eDo all four channels run independently and simultaneously?\u003c\/p\u003e\n\u003cp\u003eYes. All four outputs are independent and can run simultaneously. Channels can also be coupled by frequency \/ amplitude \/ phase ratio or merged into composite outputs (for example CH1 = CH1 + CH2 + CH3 + CH4).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eWhat modulation, sweep, and burst envelope does the UTG9504T cover?\u003c\/p\u003e\n\u003cp\u003eModulation: 15 types — AM, FM, PM, DSB-AM, ASK, FSK, PSK, 3FSK, 4FSK, BPSK, QPSK, OSK, SUM, QAM, PWM. Sweep: Linear, Logarithmic, Step, List with internal \/ external \/ manual triggers. Burst: N-cycle, gate, and infinite.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eWhat advanced waveform functions are included?\u003c\/p\u003e\n\u003cp\u003eMulti-Pulse, Multi-Tone, Sequence, Pattern (NRZ \/ RZ \/ Manchester at multiple logic standards), I\/Q, and Expression (formula-defined waveforms) are all standard, alongside PRBS PN3 to PN33 and SPI \/ I²C \/ UART digital-protocol output.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003c\/div\u003e\u003ca id=\"lb-utg9504t-500mhz-4ch-elite-series-arbitrary-waveform-generator-fourch\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTG9000T_Four_Channel_Display.png\" alt=\"UTG9504T four-channel architecture: 2 main + 2 aux\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eFour-channel Main\/AUX architecture — 2 Main + 2 AUX independent outputs\u003c\/span\u003e\n\u003c\/a\u003e\n\u003ca id=\"lb-utg9504t-500mhz-4ch-elite-series-arbitrary-waveform-generator-couple\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTG9000T_Channel_Coupling.png\" alt=\"UTG9504T channel coupling and merging\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eChannel coupling — ratio-linked parameters across channels\u003c\/span\u003e\n\u003c\/a\u003e\n\u003ca id=\"lb-utg9504t-500mhz-4ch-elite-series-arbitrary-waveform-generator-merge\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTG9000T_Channel_Merging.png\" alt=\"UTG9504T multi-channel merging for composite signals\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eMulti-channel merging — composite signals from combined outputs\u003c\/span\u003e\n\u003c\/a\u003e\n\u003ca id=\"lb-utg9504t-500mhz-4ch-elite-series-arbitrary-waveform-generator-arb\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTG9000T_Arbitrary_Wave.png\" alt=\"UTG9504T arbitrary waveforms and built-in editor\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eArbitrary-waveform output and built-in editor\u003c\/span\u003e\n\u003c\/a\u003e\n\u003ca id=\"lb-utg9504t-500mhz-4ch-elite-series-arbitrary-waveform-generator-mod\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTG9000T_Multiple_Modulation_Mode.png\" alt=\"UTG9504T 15 modulation types in one instrument\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eFifteen modulation types with sweep and burst\u003c\/span\u003e\n\u003c\/a\u003e\n\u003ca id=\"lb-utg9504t-500mhz-4ch-elite-series-arbitrary-waveform-generator-sweep\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTG9000T_Sweep_Frequency.png\" alt=\"UTG9504T sweep, prbs, and pseudo-random sequences\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eFrequency sweep and PRBS pseudo-random sequence output\u003c\/span\u003e\n\u003c\/a\u003e\n\u003ca id=\"lb-utg9504t-500mhz-4ch-elite-series-arbitrary-waveform-generator-digital\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTG9000T_Digital_Protocol_Output.png\" alt=\"UTG9504T digital-protocol output: spi, i²c, uart\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eDigital-protocol output — SPI, I²C, UART\u003c\/span\u003e\n\u003c\/a\u003e\n\u003ca id=\"lb-utg9504t-500mhz-4ch-elite-series-arbitrary-waveform-generator-counter\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTG9000T_One-button_SNR.png\" alt=\"UTG9504T one-click snr and 800 mhz frequency counter\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eOne-click SNR output and 800 MHz hardware frequency counter\u003c\/span\u003e\n\u003c\/a\u003e","brand":"UNI-T","offers":[{"title":"181300100082X","offer_id":52964919771420,"sku":"181300100082X","price":4719.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UTG9504T_Cables_sq.jpg?v=1721956840"},{"product_id":"utg4202a","title":"UTG4202A 200MHz 2Ch Performance-Series Arbitrary Waveform Generator","description":"\u003ch1\u003eUNI-T UTG4202A 200 MHz 2-Channel Performance-Series Arbitrary Waveform Generator: 16-Bit DDS with 8-Inch Display\u003c\/h1\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eUNI-T UTG4202A\u003c\/strong\u003e is a 2-channel arbitrary waveform generator with a maximum sine output of 200 MHz, built on Direct Digital Synthesis with a 500 MSa\/s sample rate and 16-bit vertical resolution. An 8 pts to 32 Mpts arbitrary-waveform memory with 7 GB of non-volatile storage supports long-form custom stimulus, and an 8-inch TFT display with a structured key-and-knob interface keeps parameter entry direct.\u003c\/p\u003e\n\u003cp\u003e60 MHz square \/ pulse output, 1 µHz frequency resolution across the full 200 MHz range, and a built-in 100 mHz to 800 MHz hardware frequency counter. Twelve analog and digital modulation types — AM, FM, PM, ASK, FSK, PSK, BPSK, QPSK, OSK, PWM, SUM, QAM. Linear and logarithmic sweep. Three burst modes (N-cycle, gated, infinite). Customizable harmonic generation. 160 built-in arbitrary waveforms with SPI \/ I²C \/ UART digital-protocol output.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eChoosing Your Model — UTG4000A Performance-Series\u003c\/h2\u003e\n\u003cp\u003eFour 2-channel models share one chassis, the same 500 MSa\/s sample rate, 16-bit DDS engine, 32 Mpts arbitrary memory, full 12-type modulation set, and the same interface and 8-inch display. They differ in one axis only: maximum output frequency.\u003c\/p\u003e\n\u003ctable class=\"product-spec-table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eUTG4082A\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e80 MHz sine \/ 30 MHz square \u0026amp; pulse — general-purpose stimulus for embedded, instrumentation, and teaching-lab work.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eUTG4122A\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e120 MHz sine \/ 40 MHz square \u0026amp; pulse — added headroom for higher-frequency stimulus and modulation carriers.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eUTG4162A\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e160 MHz sine \/ 50 MHz square \u0026amp; pulse — wider output range for RF-adjacent and faster digital work.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eUTG4202A\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e200 MHz sine \/ 60 MHz square \u0026amp; pulse — the widest output envelope in the series.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003eThis page describes the \u003cstrong\u003eUTG4202A\u003c\/strong\u003e. Channel architecture, modulation, sweep, burst, harmonic generation, interfaces, and the arbitrary engine below apply to all four models; the Specifications table lists this model's frequency figures.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cdiv class=\"product-key-features\"\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e200 MHz sine \/ 60 MHz square \u0026amp; pulse\u003c\/strong\u003e — 2-channel output with 1 µHz frequency resolution.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard dual channels\u003c\/strong\u003e — independent or channel-coupling mode for phase-locked, dual-tone, and tracking signal pairs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e500 MSa\/s sample rate, 16-bit DDS\u003c\/strong\u003e — stable, precise, low-distortion signal generation across all standard waveforms.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e32 Mpts arbitrary memory, 7 GB storage\u003c\/strong\u003e — deep custom-waveform depth with a large non-volatile on-instrument library.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e12 modulation types\u003c\/strong\u003e — AM, FM, PM, ASK, FSK, PSK, BPSK, QPSK, OSK, PWM, SUM, QAM — analog and digital in one instrument.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLinear and logarithmic sweep\u003c\/strong\u003e — with internal, external, and manual trigger sources.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree burst modes\u003c\/strong\u003e — N-cycle, gated, infinite, with configurable cycle count and start phase.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCustomizable harmonic generation\u003c\/strong\u003e — user-defined order, amplitude, and phase per harmonic.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt-in 800 MHz frequency counter\u003c\/strong\u003e — 100 mHz to 800 MHz, combined source-and-measure on one bench instrument.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e8-inch TFT display\u003c\/strong\u003e — WVGA 800 × 480 with structured key-and-knob navigation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB Host\/Device, LAN\u003c\/strong\u003e — with 10 MHz reference in\/out and external trigger; SPI \/ I²C \/ UART digital-protocol output.\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eUNI-T UTG4202A Details\u003c\/h2\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eStandard Dual Channels with Channel Coupling\u003c\/h3\u003e\n\u003cp\u003eTwo independent channels operate stand-alone or in channel-coupling mode, where a parameter change on one channel is mirrored on the other by a defined frequency, amplitude, or phase relationship. This produces phase-locked pairs, dual-tone stimulus, and tracking signals from a single instrument without external synchronization.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-utg4202a-200mhz-2ch-performance-series-arbitrary-waveform-generator-dualch\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTG4000A-Setting-Frequency.png\" alt=\"UTG4202A standard dual channels with channel coupling\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eTwo independent channels with channel-coupling output mode for phase-locked and tracking pairs.\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-utg4202a-200mhz-2ch-performance-series-arbitrary-waveform-generator-arb\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTG4000A-Arb.png\" alt=\"UTG4202A 32 mpts arbitrary waveform depth, 7 gb non-volatile storage\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003e8 pts to 32 Mpts arbitrary depth, 16-bit resolution, 7 GB non-volatile waveform storage.\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003ch3\u003e32 Mpts Arbitrary Waveform Depth, 7 GB Non-Volatile Storage\u003c\/h3\u003e\n\u003cp\u003eDirect Digital Synthesis drives an 8 pts to 32 Mpts arbitrary-waveform memory at 16-bit vertical resolution, holding long-form custom stimulus, sensor-emulation traces, and complex composite waveforms. 7 GB of non-volatile storage retains a deep library of saved arbitrary waveforms on the instrument, with 160 standard waveforms built in.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eTwelve Modulation Types in One Instrument\u003c\/h3\u003e\n\u003cp\u003eTwelve analog and digital modulation schemes are built in: AM, FM, PM, ASK, FSK, PSK, BPSK, QPSK, OSK, PWM, SUM, and QAM. Internal or external modulation sources with configurable depth and rate cover communications-stimulus development, receiver characterization, and mixed-signal test from a single channel.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-utg4202a-200mhz-2ch-performance-series-arbitrary-waveform-generator-mod\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTG4000A-Modulation.png\" alt=\"UTG4202A twelve modulation types in one instrument\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eTwelve modulation types spanning analog and digital schemes, internal or external source.\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-utg4202a-200mhz-2ch-performance-series-arbitrary-waveform-generator-sweep\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTG4000A-Sweep.png\" alt=\"UTG4202A linear and logarithmic frequency sweep\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eLinear and logarithmic sweep with internal, external, and manual triggering.\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003ch3\u003eLinear and Logarithmic Frequency Sweep\u003c\/h3\u003e\n\u003cp\u003eLinear and logarithmic frequency sweep with internal, external, and manual trigger sources supports frequency-response characterization, filter and amplifier testing, and resonance searching. Start, stop, and sweep-time parameters are independently configurable.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eBurst Generation — N-Cycle, Gated, and Infinite\u003c\/h3\u003e\n\u003cp\u003eBurst output in N-cycle, gated, and infinite modes produces precisely counted tone bursts and gated stimulus for transient testing, trigger-chain validation, and timing characterization. Cycle count, start phase, and trigger source are user-configurable.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-utg4202a-200mhz-2ch-performance-series-arbitrary-waveform-generator-burst\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTG4000A-Burst.png\" alt=\"UTG4202A burst generation — n-cycle, gated, and infinite\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eN-cycle, gated, and infinite burst with configurable cycle count and start phase.\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-utg4202a-200mhz-2ch-performance-series-arbitrary-waveform-generator-harmonic\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTG4000A-Harmonic.png\" alt=\"UTG4202A customizable harmonic generation\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eUser-defined harmonic order, amplitude, and phase for controlled spectral stimulus.\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003ch3\u003eCustomizable Harmonic Generation\u003c\/h3\u003e\n\u003cp\u003eDedicated harmonic generation outputs user-defined harmonic content with independently adjustable order, amplitude, and phase per harmonic. This supports power-quality emulation, harmonic-distortion testing, and controlled spectral-content stimulus without building the waveform point-by-point.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eBuilt-In 800 MHz Frequency Counter\u003c\/h3\u003e\n\u003cp\u003eAn integrated hardware frequency counter measures 100 mHz to 800 MHz, turning the instrument into a combined source-and-measure tool for closed-loop frequency checks, reference verification, and quick bench measurements without a separate counter.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-utg4202a-200mhz-2ch-performance-series-arbitrary-waveform-generator-counter\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTG4000A-Counter.png\" alt=\"UTG4202A built-in 800 mhz frequency counter\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eIntegrated 100 mHz to 800 MHz hardware frequency counter.\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-utg4202a-200mhz-2ch-performance-series-arbitrary-waveform-generator-noise\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTG4000A-Noise.png\" alt=\"UTG4202A adjustable noise and low-distortion dds output\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eLow-distortion DDS output with adjustable noise for SNR and immunity testing.\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003ch3\u003eAdjustable Noise and Low-Distortion DDS Output\u003c\/h3\u003e\n\u003cp\u003eDirect Digital Synthesis delivers stable, precise, low-distortion signals across all standard waveforms. Adjustable noise output supports signal-plus-noise testing, SNR characterization, and noise-immunity validation of receivers and conditioning circuits.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eApplications\u003c\/h2\u003e\n\u003cp\u003eThe Performance-Series envelope — dual independent channels, 500 MSa\/s DDS, 32 Mpts arbitrary memory, 12-type modulation, sweep, burst, and harmonic generation — covers benchtop signal generation from near-DC through the instrument's maximum output frequency.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEmbedded and mixed-signal development\u003c\/strong\u003e — dual-channel clock, data, and stimulus generation with channel coupling for phase-locked pairs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommunications-stimulus work\u003c\/strong\u003e — ASK, FSK, PSK, BPSK, QPSK, OSK, QAM digital modulation; AM, FM, PM, DSB analog modulation with configurable rate and depth.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency-response characterization\u003c\/strong\u003e — linear and logarithmic sweep for filter, amplifier, and resonance testing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTransient and timing test\u003c\/strong\u003e — N-cycle and gated burst for trigger-chain validation and counted-tone stimulus.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower-quality and harmonic emulation\u003c\/strong\u003e — customizable harmonic generation with per-harmonic order, amplitude, and phase.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLong-form arbitrary playback\u003c\/strong\u003e — 32 Mpts depth with 7 GB storage for sensor-emulation traces and extended composite waveforms.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTeaching and instrumentation labs\u003c\/strong\u003e — combined source and 800 MHz counter on one 8-inch-display instrument.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eAccessories and Family Options\u003c\/h2\u003e\n\u003ch3\u003eIncluded with Every Unit\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePower cord conforming to destination country standard\u003c\/li\u003e\n\u003cli\u003eUSB interface cable (UT-D14)\u003c\/li\u003e\n\u003cli\u003eBNC cable pair (1 m)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eOptional Accessories\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUT-U02\u003c\/strong\u003e — digital interface cable for the optional special digital interface.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFamily Members\u003c\/h3\u003e\n\u003cp\u003eThe UTG4000A Performance-Series consists of four 2-channel SKUs sharing the same chassis, sample rate, DDS engine, modulation set, and arbitrary-waveform memory depth:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUTG4082A\u003c\/strong\u003e — 80 MHz sine \/ 30 MHz square\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUTG4122A\u003c\/strong\u003e — 120 MHz sine \/ 40 MHz square\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUTG4162A\u003c\/strong\u003e — 160 MHz sine \/ 50 MHz square\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUTG4202A\u003c\/strong\u003e — 200 MHz sine \/ 60 MHz square (this product)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eHow do the four UTG4000A models differ?\u003c\/p\u003e\n\u003cp\u003eAll four are the same 2-channel instrument with the same 500 MSa\/s sample rate, 16-bit DDS engine, 32 Mpts memory, 12-type modulation set, sweep, burst, harmonic generation, interfaces, and 8-inch display. They differ only in maximum output frequency: 80 MHz (UTG4082A), 120 MHz (UTG4122A), 160 MHz (UTG4162A), and 200 MHz (UTG4202A) sine, with correspondingly scaled square\/pulse, ramp, and harmonic ranges. Choose by the highest output frequency your work requires.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eCan both channels run independently at full performance?\u003c\/p\u003e\n\u003cp\u003eYes. The two channels are independent and can output different waveforms, frequencies, and amplitudes simultaneously, or be linked in channel-coupling mode where one channel tracks the other by a defined frequency, amplitude, or phase relationship.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eWhat is channel coupling used for?\u003c\/p\u003e\n\u003cp\u003eChannel coupling locks the two outputs by a configurable ratio or offset in frequency, amplitude, or phase — useful for generating phase-locked signal pairs, dual-tone stimulus, and tracking reference signals without external synchronization hardware.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eWhat modulation, sweep, and burst does it cover?\u003c\/p\u003e\n\u003cp\u003eModulation: 12 types — AM, FM, PM, ASK, FSK, PSK, BPSK, QPSK, OSK, PWM, SUM, QAM. Sweep: linear and logarithmic with internal, external, and manual triggers. Burst: N-cycle, gated, and infinite.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eDoes it have a built-in frequency counter?\u003c\/p\u003e\n\u003cp\u003eYes — an integrated hardware frequency counter measuring 100 mHz to 800 MHz, making the instrument a combined source-and-measure tool for closed-loop frequency checks and quick bench measurements.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003c\/div\u003e\u003ca id=\"lb-utg4202a-200mhz-2ch-performance-series-arbitrary-waveform-generator-dualch\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTG4000A-Setting-Frequency.png\" alt=\"UTG4202A standard dual channels with channel coupling\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eStandard dual channels with frequency, amplitude, and phase coupling\u003c\/span\u003e\n\u003c\/a\u003e\n\u003ca id=\"lb-utg4202a-200mhz-2ch-performance-series-arbitrary-waveform-generator-arb\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTG4000A-Arb.png\" alt=\"UTG4202A 32 mpts arbitrary waveform depth, 7 gb non-volatile storage\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eDeep arbitrary-waveform memory with 7 GB non-volatile storage\u003c\/span\u003e\n\u003c\/a\u003e\n\u003ca id=\"lb-utg4202a-200mhz-2ch-performance-series-arbitrary-waveform-generator-mod\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTG4000A-Modulation.png\" alt=\"UTG4202A twelve modulation types in one instrument\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eTwelve modulation types — analog and digital — in one instrument\u003c\/span\u003e\n\u003c\/a\u003e\n\u003ca id=\"lb-utg4202a-200mhz-2ch-performance-series-arbitrary-waveform-generator-sweep\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTG4000A-Sweep.png\" alt=\"UTG4202A linear and logarithmic frequency sweep\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eLinear and logarithmic frequency sweep for response characterization\u003c\/span\u003e\n\u003c\/a\u003e\n\u003ca id=\"lb-utg4202a-200mhz-2ch-performance-series-arbitrary-waveform-generator-burst\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTG4000A-Burst.png\" alt=\"UTG4202A burst generation — n-cycle, gated, and infinite\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eBurst generation in N-cycle, gated, and infinite modes\u003c\/span\u003e\n\u003c\/a\u003e\n\u003ca id=\"lb-utg4202a-200mhz-2ch-performance-series-arbitrary-waveform-generator-harmonic\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTG4000A-Harmonic.png\" alt=\"UTG4202A customizable harmonic generation\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eCustomizable harmonic generation with per-harmonic control\u003c\/span\u003e\n\u003c\/a\u003e\n\u003ca id=\"lb-utg4202a-200mhz-2ch-performance-series-arbitrary-waveform-generator-counter\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTG4000A-Counter.png\" alt=\"UTG4202A built-in 800 mhz frequency counter\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eBuilt-in hardware frequency counter, 100 mHz to 800 MHz\u003c\/span\u003e\n\u003c\/a\u003e\n\u003ca id=\"lb-utg4202a-200mhz-2ch-performance-series-arbitrary-waveform-generator-noise\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTG4000A-Noise.png\" alt=\"UTG4202A adjustable noise and low-distortion dds output\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eAdjustable noise output and low-distortion DDS signal generation\u003c\/span\u003e\n\u003c\/a\u003e","brand":"UNI-T","offers":[{"title":"Default Title","offer_id":47947830493468,"sku":"181300100068X","price":1359.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UTG4162A_1_sq_332fb2e4-5221-4173-83ac-e4c60a4223bd.jpg?v=1723141518"},{"product_id":"utg9604t","title":"UTG9604T 600 MHz 4Ch Elite-Series Arbitrary Waveform Generator","description":"\u003ch1\u003eUNI-T UTG9604T 600 MHz 4-Channel Elite-Series Arbitrary Waveform Generator: 2.5 GSa\/s, Touch Display\u003c\/h1\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eUNI-T UTG9604T\u003c\/strong\u003e is a four-channel arbitrary waveform generator built on a 2 Main + 2 AUX channel architecture. The two Main channels (CH1, CH2) output to 600 MHz sine at a 2.5 GSa\/s sample rate with a 16-bit vertical-resolution DAC; the two AUX channels (CH3, CH4) provide additional independent outputs to 200 MHz at 625 MSa\/s and 16-bit resolution. An 8 pts to 64 Mpts per-Main-channel arbitrary memory and 16 GB of internal file storage support long-form custom stimulus. A 10.1-inch capacitive touch display replaces menu-driven navigation with direct parameter manipulation.\u003c\/p\u003e\n\u003cp\u003e200 MHz square \/ pulse on the Main channels, 1 µHz frequency resolution across the full range, total harmonic distortion of 0.075% (DC to 20 kHz), and an 800 MHz hardware frequency counter. Fifteen analog and digital modulation types — including 3FSK, 4FSK, QAM, and the full BPSK \/ QPSK \/ OSK set. Linear, logarithmic, step, and list sweep. Three burst modes. Advanced Multi-Pulse, Multi-Tone, Sequence, Pattern, I\/Q, and Expression functions. Over 200 built-in arbitrary waveforms with SPI \/ I²C \/ UART digital-protocol output.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eChoosing Your Model — UTG9000T Elite-Series\u003c\/h2\u003e\n\u003cp\u003eThree four-channel models share the same 2 Main + 2 AUX architecture, the same modulation set, advanced functions, interfaces, and chassis. They differ on two axes: maximum Main-channel output frequency, and — at the top of the range — Main-channel vertical resolution.\u003c\/p\u003e\n\u003ctable class=\"product-spec-table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eUTG9354T\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e350 MHz Main sine \/ 120 MHz Main square \u0026amp; pulse, 14-bit Main-channel DAC — the entry point to the Elite series for VHF\/UHF stimulus and digital work.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eUTG9504T\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e500 MHz Main sine \/ 160 MHz Main square \u0026amp; pulse, 14-bit Main-channel DAC — added frequency headroom for higher-band RF and high-speed digital work.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eUTG9604T\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e600 MHz Main sine \/ 200 MHz Main square \u0026amp; pulse, \u003cstrong\u003e16-bit\u003c\/strong\u003e Main-channel DAC — the widest frequency envelope \u003cem\u003eand\u003c\/em\u003e the highest Main-channel vertical resolution in the series, for the most demanding amplitude-fidelity and signal-frequency requirements. \u003cstrong\u003e(this product)\u003c\/strong\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003eOn all three models the two AUX channels (CH3\/CH4) run at 16-bit resolution and 625 MSa\/s; the resolution difference above applies to the Main channels (CH1\/CH2). This page describes the \u003cstrong\u003eUTG9604T\u003c\/strong\u003e — the Specifications table below lists this model's figures.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cdiv class=\"product-key-features\"\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e600 MHz Main sine \/ 200 MHz Main square \u0026amp; pulse\u003c\/strong\u003e — 2 Main + 2 AUX channels, 1 µHz frequency resolution.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e16-bit Main-channel DAC\u003c\/strong\u003e — CH1\/CH2 at 2.5 GSa\/s; CH3\/CH4 AUX at 16-bit \/ 625 MSa\/s.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e8 pts to 64 Mpts arbitrary memory\u003c\/strong\u003e — per Main channel, 200+ non-volatile built-ins, 16 GB internal file storage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTHD 0.075%\u003c\/strong\u003e — low distortion with high SNR and a one-click SNR overlay for signal-to-noise testing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e15 modulation types\u003c\/strong\u003e — AM, FM, PM, DSB-AM, ASK, FSK, PSK, 3FSK, 4FSK, BPSK, QPSK, OSK, SUM, QAM, PWM.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdvanced functions\u003c\/strong\u003e — Multi-Pulse, Multi-Tone, Sequence, Pattern, I\/Q, and Expression-based generation built in.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePRBS PN3 to PN33\u003c\/strong\u003e — with adjustable bit rate and edge time for serial-link and jitter-tolerance test.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDigital-protocol output\u003c\/strong\u003e — SPI, I²C, and UART driven directly from the instrument.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e800 MHz hardware frequency counter\u003c\/strong\u003e — 100 mHz to 800 MHz, 8-digit, AC \/ DC coupling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e10.1-inch capacitive touch display\u003c\/strong\u003e — 1280 × 800; direct parameter manipulation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB Host\/Device, LAN\u003c\/strong\u003e — 10 MHz reference in\/out, external trigger; full remote-control integration.\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eUNI-T UTG9604T Details\u003c\/h2\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eFour-Channel Architecture: 2 Main + 2 AUX\u003c\/h3\u003e\n\u003cp\u003eThe instrument provides four output channels in a Main \/ AUX architecture. The two Main channels (CH1, CH2) carry the full output frequency and the model's main-channel vertical resolution; the two AUX channels (CH3, CH4) provide additional independent outputs to 200 MHz (160 MHz on the 350 model) at 625 MSa\/s and 16-bit resolution. All four run independently, so a single instrument can drive a primary stimulus pair plus two auxiliary clock or reference signals.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-utg9604t-600mhz-4ch-elite-series-arbitrary-waveform-generator-fourch\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTG9000T_Four_Channel_Display.png\" alt=\"UTG9604T four-channel architecture: 2 main + 2 aux\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eFour-channel display — 2 Main (full frequency) + 2 AUX channels.\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-utg9604t-600mhz-4ch-elite-series-arbitrary-waveform-generator-couple\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTG9000T_Channel_Coupling.png\" alt=\"UTG9604T channel coupling and merging\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eFrequency \/ amplitude \/ phase coupling across channels.\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003ch3\u003eChannel Coupling and Merging\u003c\/h3\u003e\n\u003cp\u003eChannels can be coupled with configurable frequency, amplitude, and phase relationships so a parameter change on one channel propagates to its coupled partners by a defined ratio and offset. Outputs can also be merged into arbitrary combinations — for example CH1 = CH1 + CH2 + CH3 + CH4 — producing summed and composite signals from a single instrument without external combiners.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eMulti-Channel Merging for Composite Signals\u003c\/h3\u003e\n\u003cp\u003eChannel merging combines any selection of the four outputs into a single composite waveform, summing channels in arbitrary configurations. This synthesizes layered test signals — carrier plus interferer, signal plus controlled noise, or multi-component stimulus — directly from the instrument with no external summing hardware.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-utg9604t-600mhz-4ch-elite-series-arbitrary-waveform-generator-merge\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTG9000T_Channel_Merging.png\" alt=\"UTG9604T multi-channel merging for composite signals\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eChannel merging — arbitrary combinations into one composite output.\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-utg9604t-600mhz-4ch-elite-series-arbitrary-waveform-generator-arb\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTG9000T_Arbitrary_Wave.png\" alt=\"UTG9604T arbitrary waveforms and built-in editor\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003e8 pts to 64 Mpts arbitrary, 200+ built-in, 16 GB file storage.\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003ch3\u003eArbitrary Waveforms and Built-In Editor\u003c\/h3\u003e\n\u003cp\u003ePoint-by-point arbitrary output spans 8 pts to 64 Mpts on the Main channels with over 200 non-volatile built-in waveforms and 16 GB of internal storage for .bsv\/.csv files. The built-in editor supports manual drawing, line drawing, and expression-based generation, and also runs on a PC over USB or LAN for large waveform construction.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003e15 Modulation Types in One Instrument\u003c\/h3\u003e\n\u003cp\u003eFifteen analog and digital modulation schemes are built in: AM, FM, PM, DSB-AM, ASK, FSK, PSK, 3FSK, 4FSK, BPSK, QPSK, OSK, SUM, QAM, and PWM. Each channel supports independent or simultaneous internal\/external modulation and internal\/external\/manual triggering, alongside Linear\/Logarithmic\/Step\/List frequency sweep and N-cycle\/gate\/infinite burst.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-utg9604t-600mhz-4ch-elite-series-arbitrary-waveform-generator-mod\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTG9000T_Multiple_Modulation_Mode.png\" alt=\"UTG9604T 15 modulation types in one instrument\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eFifteen modulation types — analog and digital — plus sweep and burst.\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-utg9604t-600mhz-4ch-elite-series-arbitrary-waveform-generator-sweep\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTG9000T_Sweep_Frequency.png\" alt=\"UTG9604T sweep, prbs, and pseudo-random sequences\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eLinear \/ log \/ step \/ list sweep; PRBS PN3 to PN33.\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003ch3\u003eSweep, PRBS, and Pseudo-Random Sequences\u003c\/h3\u003e\n\u003cp\u003eLinear, logarithmic, step, and list frequency sweep cover stimulus-response and frequency-characterization work. Pseudo-random binary sequence output runs PN3 through PN33 patterns with adjustable bit rate and edge time for serial-link, jitter-tolerance, and bit-error-rate testing directly from the generator.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eDigital-Protocol Output: SPI, I²C, UART\u003c\/h3\u003e\n\u003cp\u003eBuilt-in digital-protocol output drives SPI, I²C, and UART buses directly. SPI and I²C run a 1 Hz to 50 MHz clock with configurable data depth; UART supports custom baud rates with adjustable data, stop, and parity bits — useful for stimulating and emulating embedded serial peripherals without a separate protocol generator.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-utg9604t-600mhz-4ch-elite-series-arbitrary-waveform-generator-digital\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTG9000T_Digital_Protocol_Output.png\" alt=\"UTG9604T digital-protocol output: spi, i²c, uart\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eSPI, I²C, and UART protocol output built in.\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-utg9604t-600mhz-4ch-elite-series-arbitrary-waveform-generator-counter\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTG9000T_One-button_SNR.png\" alt=\"UTG9604T one-click snr and 800 mhz frequency counter\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eOne-click SNR overlay; 100 mHz to 800 MHz, 8-digit counter.\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003ch3\u003eOne-Click SNR and 800 MHz Frequency Counter\u003c\/h3\u003e\n\u003cp\u003eOne-click SNR output applies a calibrated noise overlay to a clean carrier for fast signal-to-noise and receiver-sensitivity testing. A high-precision hardware frequency counter measures 100 mHz to 800 MHz with 8-digit resolution and AC\/DC coupling, so frequency, period, and duty-ratio measurements run on the same instrument.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eApplications\u003c\/h2\u003e\n\u003cp\u003eThe UTG9604T envelope — 2 Main + 2 AUX channels, 2.5 GSa\/s Main sampling, 16-bit Main-channel resolution, 64 Mpts per Main channel, THD 0.075%, 15-type modulation, and the full advanced-function set — targets benchtop work needing genuine multi-channel stimulus, deep arbitrary support, or wide modulation coverage.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-channel embedded and RF development\u003c\/strong\u003e — two Main channels drive primary stimulus while two AUX channels supply clock or reference signals, all from one instrument.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRF and communications stimulus\u003c\/strong\u003e — 3FSK, 4FSK, BPSK, QPSK, OSK, QAM digital modulation and SUM \/ DSB-AM analog modulation across the Main-channel output range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-speed digital and serial-link test\u003c\/strong\u003e — fast Main-channel edges, PRBS PN3 to PN33, and SPI \/ I²C \/ UART protocol output for interface and jitter-tolerance work.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAudio and instrumentation testing\u003c\/strong\u003e — THD 0.075% from DC to 20 kHz when characterizing op-amp distortion, ADC noise floors, and audio-band response.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLong-form arbitrary playback\u003c\/strong\u003e — up to 64 Mpts per Main channel holds extended protocol streams and complex composite waveforms; 16 GB internal file storage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eI\/Q and modulated-carrier work\u003c\/strong\u003e — baseband I\/Q generation for communication-system verification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomated test (ATE)\u003c\/strong\u003e — LAN\/USB remote control and instrument-manager software for synchronized benches.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eAccessories and Family Options\u003c\/h2\u003e\n\u003ch3\u003eIncluded with Every Unit\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePower cord conforming to destination country standard\u003c\/li\u003e\n\u003cli\u003eUSB data cable (UT-D14)\u003c\/li\u003e\n\u003cli\u003eBNC-to-BNC cable × 4 (UT-L45)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFamily Members\u003c\/h3\u003e\n\u003cp\u003eThe UTG9000T Elite-Series consists of three four-channel models sharing the same 2 Main + 2 AUX architecture, modulation set, advanced functions, and chassis:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUTG9354T\u003c\/strong\u003e — 350 MHz Main sine, 14-bit Main DAC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUTG9504T\u003c\/strong\u003e — 500 MHz Main sine, 14-bit Main DAC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUTG9604T\u003c\/strong\u003e — 600 MHz Main sine, 16-bit Main DAC (this product)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eWhat is the difference between the three UTG9000T models?\u003c\/p\u003e\n\u003cp\u003eAll three share the same 2 Main + 2 AUX channel architecture, modulation set, advanced functions, interfaces, and chassis. They differ in Main-channel maximum frequency — 350 MHz (UTG9354T), 500 MHz (UTG9504T), 600 MHz (UTG9604T) sine — and in Main-channel vertical resolution: the UTG9604T has a 16-bit Main-channel DAC, while the UTG9354T and UTG9504T use a 14-bit Main-channel DAC. All three run 16-bit on the AUX channels. Choose by the highest Main-channel frequency your work requires, and select the UTG9604T when 16-bit Main-channel amplitude fidelity matters.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eWhat is the difference between the Main and AUX channels?\u003c\/p\u003e\n\u003cp\u003eThe two Main channels (CH1, CH2) carry the model's full output frequency at a 2.5 GSa\/s sample rate and the model's Main-channel resolution. The two AUX channels (CH3, CH4) are independent additional outputs running to 200 MHz (160 MHz on the 350 model) at 625 MSa\/s and 16-bit resolution — suited to clock, reference, and secondary-stimulus roles alongside the Main pair.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eDo all four channels run independently and simultaneously?\u003c\/p\u003e\n\u003cp\u003eYes. All four outputs are independent and can run simultaneously. Channels can also be coupled by frequency \/ amplitude \/ phase ratio or merged into composite outputs (for example CH1 = CH1 + CH2 + CH3 + CH4).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eWhat modulation, sweep, and burst envelope does the UTG9604T cover?\u003c\/p\u003e\n\u003cp\u003eModulation: 15 types — AM, FM, PM, DSB-AM, ASK, FSK, PSK, 3FSK, 4FSK, BPSK, QPSK, OSK, SUM, QAM, PWM. Sweep: Linear, Logarithmic, Step, List with internal \/ external \/ manual triggers. Burst: N-cycle, gate, and infinite.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eWhat advanced waveform functions are included?\u003c\/p\u003e\n\u003cp\u003eMulti-Pulse, Multi-Tone, Sequence, Pattern (NRZ \/ RZ \/ Manchester at multiple logic standards), I\/Q, and Expression (formula-defined waveforms) are all standard, alongside PRBS PN3 to PN33 and SPI \/ I²C \/ UART digital-protocol output.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003c\/div\u003e\u003ca id=\"lb-utg9604t-600mhz-4ch-elite-series-arbitrary-waveform-generator-fourch\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTG9000T_Four_Channel_Display.png\" alt=\"UTG9604T four-channel architecture: 2 main + 2 aux\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eFour-channel Main\/AUX architecture — 2 Main + 2 AUX independent outputs\u003c\/span\u003e\n\u003c\/a\u003e\n\u003ca id=\"lb-utg9604t-600mhz-4ch-elite-series-arbitrary-waveform-generator-couple\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTG9000T_Channel_Coupling.png\" alt=\"UTG9604T channel coupling and merging\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eChannel coupling — ratio-linked parameters across channels\u003c\/span\u003e\n\u003c\/a\u003e\n\u003ca id=\"lb-utg9604t-600mhz-4ch-elite-series-arbitrary-waveform-generator-merge\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTG9000T_Channel_Merging.png\" alt=\"UTG9604T multi-channel merging for composite signals\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eMulti-channel merging — composite signals from combined outputs\u003c\/span\u003e\n\u003c\/a\u003e\n\u003ca id=\"lb-utg9604t-600mhz-4ch-elite-series-arbitrary-waveform-generator-arb\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTG9000T_Arbitrary_Wave.png\" alt=\"UTG9604T arbitrary waveforms and built-in editor\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eArbitrary-waveform output and built-in editor\u003c\/span\u003e\n\u003c\/a\u003e\n\u003ca id=\"lb-utg9604t-600mhz-4ch-elite-series-arbitrary-waveform-generator-mod\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTG9000T_Multiple_Modulation_Mode.png\" alt=\"UTG9604T 15 modulation types in one instrument\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eFifteen modulation types with sweep and burst\u003c\/span\u003e\n\u003c\/a\u003e\n\u003ca id=\"lb-utg9604t-600mhz-4ch-elite-series-arbitrary-waveform-generator-sweep\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTG9000T_Sweep_Frequency.png\" alt=\"UTG9604T sweep, prbs, and pseudo-random sequences\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eFrequency sweep and PRBS pseudo-random sequence output\u003c\/span\u003e\n\u003c\/a\u003e\n\u003ca id=\"lb-utg9604t-600mhz-4ch-elite-series-arbitrary-waveform-generator-digital\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTG9000T_Digital_Protocol_Output.png\" alt=\"UTG9604T digital-protocol output: spi, i²c, uart\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eDigital-protocol output — SPI, I²C, UART\u003c\/span\u003e\n\u003c\/a\u003e\n\u003ca id=\"lb-utg9604t-600mhz-4ch-elite-series-arbitrary-waveform-generator-counter\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTG9000T_One-button_SNR.png\" alt=\"UTG9604T one-click snr and 800 mhz frequency counter\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eOne-click SNR output and 800 MHz hardware frequency counter\u003c\/span\u003e\n\u003c\/a\u003e","brand":"UNI-T","offers":[{"title":"Default Title","offer_id":48953256673564,"sku":"181300100083X","price":5087.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UTG9604T_Cables_sq.jpg?v=1721444045"},{"product_id":"utg9354t","title":"UTG9354T 350 MHz 4Ch Elite-Series Arbitrary Waveform Generator","description":"\u003ch1\u003eUNI-T UTG9354T 350 MHz 4-Channel Elite-Series Arbitrary Waveform Generator: 2.5 GSa\/s, Touch Display\u003c\/h1\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eUNI-T UTG9354T\u003c\/strong\u003e is a four-channel arbitrary waveform generator built on a 2 Main + 2 AUX channel architecture. The two Main channels (CH1, CH2) output to 350 MHz sine at a 2.5 GSa\/s sample rate with a 14-bit vertical-resolution DAC; the two AUX channels (CH3, CH4) provide additional independent outputs to 160 MHz at 625 MSa\/s and 16-bit resolution. An 8 pts to 64 Mpts per-Main-channel arbitrary memory and 16 GB of internal file storage support long-form custom stimulus. A 10.1-inch capacitive touch display replaces menu-driven navigation with direct parameter manipulation.\u003c\/p\u003e\n\u003cp\u003e120 MHz square \/ pulse on the Main channels, 1 µHz frequency resolution across the full range, total harmonic distortion of 0.075% (DC to 20 kHz), and an 800 MHz hardware frequency counter. Fifteen analog and digital modulation types — including 3FSK, 4FSK, QAM, and the full BPSK \/ QPSK \/ OSK set. Linear, logarithmic, step, and list sweep. Three burst modes. Advanced Multi-Pulse, Multi-Tone, Sequence, Pattern, I\/Q, and Expression functions. Over 200 built-in arbitrary waveforms with SPI \/ I²C \/ UART digital-protocol output.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eChoosing Your Model — UTG9000T Elite-Series\u003c\/h2\u003e\n\u003cp\u003eThree four-channel models share the same 2 Main + 2 AUX architecture, the same modulation set, advanced functions, interfaces, and chassis. They differ on two axes: maximum Main-channel output frequency, and — at the top of the range — Main-channel vertical resolution.\u003c\/p\u003e\n\u003ctable class=\"product-spec-table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eUTG9354T\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e350 MHz Main sine \/ 120 MHz Main square \u0026amp; pulse, 14-bit Main-channel DAC — the entry point to the Elite series for VHF\/UHF stimulus and digital work. \u003cstrong\u003e(this product)\u003c\/strong\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eUTG9504T\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e500 MHz Main sine \/ 160 MHz Main square \u0026amp; pulse, 14-bit Main-channel DAC — added frequency headroom for higher-band RF and high-speed digital work.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eUTG9604T\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e600 MHz Main sine \/ 200 MHz Main square \u0026amp; pulse, \u003cstrong\u003e16-bit\u003c\/strong\u003e Main-channel DAC — the widest frequency envelope \u003cem\u003eand\u003c\/em\u003e the highest Main-channel vertical resolution in the series, for the most demanding amplitude-fidelity and signal-frequency requirements.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003eOn all three models the two AUX channels (CH3\/CH4) run at 16-bit resolution and 625 MSa\/s; the resolution difference above applies to the Main channels (CH1\/CH2). This page describes the \u003cstrong\u003eUTG9354T\u003c\/strong\u003e — the Specifications table below lists this model's figures.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cdiv class=\"product-key-features\"\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e350 MHz Main sine \/ 120 MHz Main square \u0026amp; pulse\u003c\/strong\u003e — 2 Main + 2 AUX channels, 1 µHz frequency resolution.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e14-bit Main-channel DAC\u003c\/strong\u003e — CH1\/CH2 at 2.5 GSa\/s; CH3\/CH4 AUX at 16-bit \/ 625 MSa\/s.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e8 pts to 64 Mpts arbitrary memory\u003c\/strong\u003e — per Main channel, 200+ non-volatile built-ins, 16 GB internal file storage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTHD 0.075%\u003c\/strong\u003e — low distortion with high SNR and a one-click SNR overlay for signal-to-noise testing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e15 modulation types\u003c\/strong\u003e — AM, FM, PM, DSB-AM, ASK, FSK, PSK, 3FSK, 4FSK, BPSK, QPSK, OSK, SUM, QAM, PWM.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdvanced functions\u003c\/strong\u003e — Multi-Pulse, Multi-Tone, Sequence, Pattern, I\/Q, and Expression-based generation built in.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePRBS PN3 to PN33\u003c\/strong\u003e — with adjustable bit rate and edge time for serial-link and jitter-tolerance test.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDigital-protocol output\u003c\/strong\u003e — SPI, I²C, and UART driven directly from the instrument.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e800 MHz hardware frequency counter\u003c\/strong\u003e — 100 mHz to 800 MHz, 8-digit, AC \/ DC coupling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e10.1-inch capacitive touch display\u003c\/strong\u003e — 1280 × 800; direct parameter manipulation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB Host\/Device, LAN\u003c\/strong\u003e — 10 MHz reference in\/out, external trigger; full remote-control integration.\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eUNI-T UTG9354T Details\u003c\/h2\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eFour-Channel Architecture: 2 Main + 2 AUX\u003c\/h3\u003e\n\u003cp\u003eThe instrument provides four output channels in a Main \/ AUX architecture. The two Main channels (CH1, CH2) carry the full output frequency and the model's main-channel vertical resolution; the two AUX channels (CH3, CH4) provide additional independent outputs to 200 MHz (160 MHz on the 350 model) at 625 MSa\/s and 16-bit resolution. All four run independently, so a single instrument can drive a primary stimulus pair plus two auxiliary clock or reference signals.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-utg9354t-350mhz-4ch-elite-series-arbitrary-waveform-generator-fourch\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTG9000T_Four_Channel_Display.png\" alt=\"UTG9354T four-channel architecture: 2 main + 2 aux\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eFour-channel display — 2 Main (full frequency) + 2 AUX channels.\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-utg9354t-350mhz-4ch-elite-series-arbitrary-waveform-generator-couple\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTG9000T_Channel_Coupling.png\" alt=\"UTG9354T channel coupling and merging\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eFrequency \/ amplitude \/ phase coupling across channels.\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003ch3\u003eChannel Coupling and Merging\u003c\/h3\u003e\n\u003cp\u003eChannels can be coupled with configurable frequency, amplitude, and phase relationships so a parameter change on one channel propagates to its coupled partners by a defined ratio and offset. Outputs can also be merged into arbitrary combinations — for example CH1 = CH1 + CH2 + CH3 + CH4 — producing summed and composite signals from a single instrument without external combiners.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eMulti-Channel Merging for Composite Signals\u003c\/h3\u003e\n\u003cp\u003eChannel merging combines any selection of the four outputs into a single composite waveform, summing channels in arbitrary configurations. This synthesizes layered test signals — carrier plus interferer, signal plus controlled noise, or multi-component stimulus — directly from the instrument with no external summing hardware.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-utg9354t-350mhz-4ch-elite-series-arbitrary-waveform-generator-merge\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTG9000T_Channel_Merging.png\" alt=\"UTG9354T multi-channel merging for composite signals\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eChannel merging — arbitrary combinations into one composite output.\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-utg9354t-350mhz-4ch-elite-series-arbitrary-waveform-generator-arb\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTG9000T_Arbitrary_Wave.png\" alt=\"UTG9354T arbitrary waveforms and built-in editor\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003e8 pts to 64 Mpts arbitrary, 200+ built-in, 16 GB file storage.\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003ch3\u003eArbitrary Waveforms and Built-In Editor\u003c\/h3\u003e\n\u003cp\u003ePoint-by-point arbitrary output spans 8 pts to 64 Mpts on the Main channels with over 200 non-volatile built-in waveforms and 16 GB of internal storage for .bsv\/.csv files. The built-in editor supports manual drawing, line drawing, and expression-based generation, and also runs on a PC over USB or LAN for large waveform construction.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003e15 Modulation Types in One Instrument\u003c\/h3\u003e\n\u003cp\u003eFifteen analog and digital modulation schemes are built in: AM, FM, PM, DSB-AM, ASK, FSK, PSK, 3FSK, 4FSK, BPSK, QPSK, OSK, SUM, QAM, and PWM. Each channel supports independent or simultaneous internal\/external modulation and internal\/external\/manual triggering, alongside Linear\/Logarithmic\/Step\/List frequency sweep and N-cycle\/gate\/infinite burst.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-utg9354t-350mhz-4ch-elite-series-arbitrary-waveform-generator-mod\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTG9000T_Multiple_Modulation_Mode.png\" alt=\"UTG9354T 15 modulation types in one instrument\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eFifteen modulation types — analog and digital — plus sweep and burst.\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-utg9354t-350mhz-4ch-elite-series-arbitrary-waveform-generator-sweep\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTG9000T_Sweep_Frequency.png\" alt=\"UTG9354T sweep, prbs, and pseudo-random sequences\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eLinear \/ log \/ step \/ list sweep; PRBS PN3 to PN33.\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003ch3\u003eSweep, PRBS, and Pseudo-Random Sequences\u003c\/h3\u003e\n\u003cp\u003eLinear, logarithmic, step, and list frequency sweep cover stimulus-response and frequency-characterization work. Pseudo-random binary sequence output runs PN3 through PN33 patterns with adjustable bit rate and edge time for serial-link, jitter-tolerance, and bit-error-rate testing directly from the generator.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003ch3\u003eDigital-Protocol Output: SPI, I²C, UART\u003c\/h3\u003e\n\u003cp\u003eBuilt-in digital-protocol output drives SPI, I²C, and UART buses directly. SPI and I²C run a 1 Hz to 50 MHz clock with configurable data depth; UART supports custom baud rates with adjustable data, stop, and parity bits — useful for stimulating and emulating embedded serial peripherals without a separate protocol generator.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-utg9354t-350mhz-4ch-elite-series-arbitrary-waveform-generator-digital\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTG9000T_Digital_Protocol_Output.png\" alt=\"UTG9354T digital-protocol output: spi, i²c, uart\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eSPI, I²C, and UART protocol output built in.\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-row\"\u003e\n\u003cdiv class=\"product-box product-left\"\u003e\n\u003cfigure class=\"product-figure\"\u003e\n\u003ca href=\"#lb-utg9354t-350mhz-4ch-elite-series-arbitrary-waveform-generator-counter\" class=\"product-thumb-link\"\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTG9000T_One-button_SNR.png\" alt=\"UTG9354T one-click snr and 800 mhz frequency counter\" class=\"product-image-thumb\"\u003e\n\u003c\/a\u003e\n\u003cfigcaption class=\"product-figcaption\"\u003eOne-click SNR overlay; 100 mHz to 800 MHz, 8-digit counter.\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-box product-right\"\u003e\n\u003ch3\u003eOne-Click SNR and 800 MHz Frequency Counter\u003c\/h3\u003e\n\u003cp\u003eOne-click SNR output applies a calibrated noise overlay to a clean carrier for fast signal-to-noise and receiver-sensitivity testing. A high-precision hardware frequency counter measures 100 mHz to 800 MHz with 8-digit resolution and AC\/DC coupling, so frequency, period, and duty-ratio measurements run on the same instrument.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eApplications\u003c\/h2\u003e\n\u003cp\u003eThe UTG9354T envelope — 2 Main + 2 AUX channels, 2.5 GSa\/s Main sampling, 14-bit Main-channel resolution, 64 Mpts per Main channel, THD 0.075%, 15-type modulation, and the full advanced-function set — targets benchtop work needing genuine multi-channel stimulus, deep arbitrary support, or wide modulation coverage.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-channel embedded and RF development\u003c\/strong\u003e — two Main channels drive primary stimulus while two AUX channels supply clock or reference signals, all from one instrument.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRF and communications stimulus\u003c\/strong\u003e — 3FSK, 4FSK, BPSK, QPSK, OSK, QAM digital modulation and SUM \/ DSB-AM analog modulation across the Main-channel output range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-speed digital and serial-link test\u003c\/strong\u003e — fast Main-channel edges, PRBS PN3 to PN33, and SPI \/ I²C \/ UART protocol output for interface and jitter-tolerance work.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAudio and instrumentation testing\u003c\/strong\u003e — THD 0.075% from DC to 20 kHz when characterizing op-amp distortion, ADC noise floors, and audio-band response.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLong-form arbitrary playback\u003c\/strong\u003e — up to 64 Mpts per Main channel holds extended protocol streams and complex composite waveforms; 16 GB internal file storage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eI\/Q and modulated-carrier work\u003c\/strong\u003e — baseband I\/Q generation for communication-system verification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomated test (ATE)\u003c\/strong\u003e — LAN\/USB remote control and instrument-manager software for synchronized benches.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eAccessories and Family Options\u003c\/h2\u003e\n\u003ch3\u003eIncluded with Every Unit\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePower cord conforming to destination country standard\u003c\/li\u003e\n\u003cli\u003eUSB data cable (UT-D14)\u003c\/li\u003e\n\u003cli\u003eBNC-to-BNC cable × 4 (UT-L45)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFamily Members\u003c\/h3\u003e\n\u003cp\u003eThe UTG9000T Elite-Series consists of three four-channel models sharing the same 2 Main + 2 AUX architecture, modulation set, advanced functions, and chassis:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUTG9354T\u003c\/strong\u003e — 350 MHz Main sine, 14-bit Main DAC (this product)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUTG9504T\u003c\/strong\u003e — 500 MHz Main sine, 14-bit Main DAC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUTG9604T\u003c\/strong\u003e — 600 MHz Main sine, 16-bit Main DAC\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-container\"\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eWhat is the difference between the three UTG9000T models?\u003c\/p\u003e\n\u003cp\u003eAll three share the same 2 Main + 2 AUX channel architecture, modulation set, advanced functions, interfaces, and chassis. They differ in Main-channel maximum frequency — 350 MHz (UTG9354T), 500 MHz (UTG9504T), 600 MHz (UTG9604T) sine — and in Main-channel vertical resolution: the UTG9604T has a 16-bit Main-channel DAC, while the UTG9354T and UTG9504T use a 14-bit Main-channel DAC. All three run 16-bit on the AUX channels. Choose by the highest Main-channel frequency your work requires, and select the UTG9604T when 16-bit Main-channel amplitude fidelity matters.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eWhat is the difference between the Main and AUX channels?\u003c\/p\u003e\n\u003cp\u003eThe two Main channels (CH1, CH2) carry the model's full output frequency at a 2.5 GSa\/s sample rate and the model's Main-channel resolution. The two AUX channels (CH3, CH4) are independent additional outputs running to 200 MHz (160 MHz on the 350 model) at 625 MSa\/s and 16-bit resolution — suited to clock, reference, and secondary-stimulus roles alongside the Main pair.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eDo all four channels run independently and simultaneously?\u003c\/p\u003e\n\u003cp\u003eYes. All four outputs are independent and can run simultaneously. Channels can also be coupled by frequency \/ amplitude \/ phase ratio or merged into composite outputs (for example CH1 = CH1 + CH2 + CH3 + CH4).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eWhat modulation, sweep, and burst envelope does the UTG9354T cover?\u003c\/p\u003e\n\u003cp\u003eModulation: 15 types — AM, FM, PM, DSB-AM, ASK, FSK, PSK, 3FSK, 4FSK, BPSK, QPSK, OSK, SUM, QAM, PWM. Sweep: Linear, Logarithmic, Step, List with internal \/ external \/ manual triggers. Burst: N-cycle, gate, and infinite.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-faq-item\"\u003e\n\u003cp class=\"product-faq-question\"\u003eWhat advanced waveform functions are included?\u003c\/p\u003e\n\u003cp\u003eMulti-Pulse, Multi-Tone, Sequence, Pattern (NRZ \/ RZ \/ Manchester at multiple logic standards), I\/Q, and Expression (formula-defined waveforms) are all standard, alongside PRBS PN3 to PN33 and SPI \/ I²C \/ UART digital-protocol output.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003c\/div\u003e\u003ca id=\"lb-utg9354t-350mhz-4ch-elite-series-arbitrary-waveform-generator-fourch\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTG9000T_Four_Channel_Display.png\" alt=\"UTG9354T four-channel architecture: 2 main + 2 aux\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eFour-channel Main\/AUX architecture — 2 Main + 2 AUX independent outputs\u003c\/span\u003e\n\u003c\/a\u003e\n\u003ca id=\"lb-utg9354t-350mhz-4ch-elite-series-arbitrary-waveform-generator-couple\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTG9000T_Channel_Coupling.png\" alt=\"UTG9354T channel coupling and merging\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eChannel coupling — ratio-linked parameters across channels\u003c\/span\u003e\n\u003c\/a\u003e\n\u003ca id=\"lb-utg9354t-350mhz-4ch-elite-series-arbitrary-waveform-generator-merge\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTG9000T_Channel_Merging.png\" alt=\"UTG9354T multi-channel merging for composite signals\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eMulti-channel merging — composite signals from combined outputs\u003c\/span\u003e\n\u003c\/a\u003e\n\u003ca id=\"lb-utg9354t-350mhz-4ch-elite-series-arbitrary-waveform-generator-arb\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTG9000T_Arbitrary_Wave.png\" alt=\"UTG9354T arbitrary waveforms and built-in editor\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eArbitrary-waveform output and built-in editor\u003c\/span\u003e\n\u003c\/a\u003e\n\u003ca id=\"lb-utg9354t-350mhz-4ch-elite-series-arbitrary-waveform-generator-mod\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTG9000T_Multiple_Modulation_Mode.png\" alt=\"UTG9354T 15 modulation types in one instrument\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eFifteen modulation types with sweep and burst\u003c\/span\u003e\n\u003c\/a\u003e\n\u003ca id=\"lb-utg9354t-350mhz-4ch-elite-series-arbitrary-waveform-generator-sweep\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTG9000T_Sweep_Frequency.png\" alt=\"UTG9354T sweep, prbs, and pseudo-random sequences\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eFrequency sweep and PRBS pseudo-random sequence output\u003c\/span\u003e\n\u003c\/a\u003e\n\u003ca id=\"lb-utg9354t-350mhz-4ch-elite-series-arbitrary-waveform-generator-digital\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTG9000T_Digital_Protocol_Output.png\" alt=\"UTG9354T digital-protocol output: spi, i²c, uart\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eDigital-protocol output — SPI, I²C, UART\u003c\/span\u003e\n\u003c\/a\u003e\n\u003ca id=\"lb-utg9354t-350mhz-4ch-elite-series-arbitrary-waveform-generator-counter\" href=\"#_\" class=\"product-lightbox\"\u003e\n\u003cspan class=\"lightbox-close\"\u003e×\u003c\/span\u003e\n\u003cimg src=\"https:\/\/res.cloudinary.com\/UNI-T\/image\/upload\/UTG9000T_One-button_SNR.png\" alt=\"UTG9354T one-click snr and 800 mhz frequency counter\"\u003e\n\u003cspan class=\"lightbox-caption\"\u003eOne-click SNR output and 800 MHz hardware frequency counter\u003c\/span\u003e\n\u003c\/a\u003e","brand":"UNI-T","offers":[{"title":"Default Title","offer_id":48953281773852,"sku":"181300100084X","price":3023.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/files\/UTG9354T_Cables_sq.jpg?v=1721956840"},{"product_id":"test-lc-002","title":"[TEST] Lifecycle State 1 — Clearance with Replacement","description":"\u003cp\u003eTest product for lifecycle State 1: discontinued + in stock + has replacement. Should show clearance banner + replacement card.\u003c\/p\u003e","brand":"UNI-T","offers":[{"title":"Default Title","offer_id":54034772623644,"sku":null,"price":1.0,"currency_code":"USD","in_stock":true}]},{"product_id":"test-lc-003","title":"[TEST] Lifecycle State 2 — Clearance Dead End","description":"\u003cp\u003eTest product for lifecycle State 2: discontinued + in stock + no replacement. Should show clearance banner with parent collection link only.\u003c\/p\u003e","brand":"UNI-T","offers":[{"title":"Default Title","offer_id":54034772656412,"sku":null,"price":1.0,"currency_code":"USD","in_stock":true}]},{"product_id":"test-lc-006","title":"[TEST] Lifecycle State 6 — Active Replacement Target","description":"\u003cp\u003eTest product for lifecycle State 6: active + in stock + is the replacement target for LC-002 and LC-004. Also has clearance tag to test State 5 banner.\u003c\/p\u003e","brand":"UNI-T","offers":[{"title":"Default Title","offer_id":54034772787484,"sku":null,"price":1.0,"currency_code":"USD","in_stock":true}]}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/9208\/0924\/collections\/UNI-T_Clearance_Post_2026.png?v=1775610137","url":"https:\/\/uni-trendus.com\/collections\/clearance.oembed?page=2","provider":"Uni-Trend US","version":"1.0","type":"link"}